Silylated poly(4-hydroxystyrene)s as negative electron beam resists

Silylated poly(4-hydroxystyrene)s and radical polymerized 4-tert-butyldimethylsilyloxystyrene (TBDMSOSt) were examined as electron beam resists. Commercial poly(4-hydroxystyrene) (PHS) with M_w = 1.69 × 10⁴ and M_w/M_n = 5.41 was silylated with 1-(trimethylsilyl)imidazole and tert-butylchlorodimethylsilane. Both silylation reactions proceeded quantitatively to afford trimethylsilylated PHS with M_w = 3.93 × 10⁴ and M_w/M_n = 4.91, and tert-butyldimethylsilylated PHS with M_w = 4.08 × 10⁴ and M_w/M_n = 3.81. These 2 silyl ether polymers acted as a negative working resist to electron beam (EB) exposure. Sensitivity and contrast of tert- butyldimethylsilylated PHS were not affected by prebake temperature around its T_g of 97°C, while those of PHS were dependent on prebake temperature around its T_g of 160°C. At a prebake temperature of 125°C, the sensitivity parameter and the contrast γ value were obtained as follows: 3.93 × 10⁻⁴ C cm⁻² and 0.91 for PHS; 1.49 × 10⁻⁴ C cm⁻² and 1.06 for trimethylsilylated PHS; 1.84 × 10⁻⁴ C cm⁻² and 1.44 for tert-butyldimethylsilylated PHS. The silylation procedures obviously improved the sensitivity of PHS. TBDMSOSt was polymerized in bulk at 60°C with 2,2′-azobisisobutyronitrile (AIBN) as an initiator. The resultant poly(TBDMSOSt) possessed M_w = 3.01 × 10⁵ and M_w/M_n = 1.92 and exhibited a sensitivity of 1.60 × 10⁻⁵ C cm⁻² and a γ value of 1.47. More than 10 times enhancement of sensitivity was observed compared with tert-butyldimethylsilylated PHS. Such a high sensitivity is probably due to the high molecular weight of the bulk polymerized material. Poly(TBDMSOSt) resolved an isolated line of 0.20 μm width and 0.5 μm line and space patterns. © 1998 John Wiley & Sons, Inc. J. Appl. Polym. Sci. 70: 1151–1157, 1998     

Synthesis and biological activity of phthalimide‐based polymers containing 5‐fluorouracil

The attachment of anticancer agents to polymers is a promising approach towards reducing the toxic side‐effects and retaining the potent antitumour activity of these agents. A new tetrahydrophthalimido monomer containing 5‐fluorouracil (ETPFU) and its homopolymer and copolymers with acrylic acid (AA) and with vinyl acetate (VAc) have been synthesized and spectroscopically characterized. The ETPFU contents in poly(ETPFU‐co‐AA) and poly(ETPFU‐co‐VAc) obtained by elemental analysis were 21 mol% and 20 mol%, respectively. The average molecular weights of the polymers determined by gel permeation chromatography were as follows: M_n = 8900 g mol^?1, M_w = 13 300 g mol^?1, M_w/M_n = 1.5 for poly(ETPFU); M_n = 13 500 g mol^?1, M_w = 16 600 g mol^?1, M_w/M_n = 1.2 for poly(ETPFU‐co‐AA); M_n = 8300 g mol^?1, M_w = 11 600 g mol^?1, M_w/M_n = 1.4 poly(ETPFU‐co‐VAc). The in vitro cytotoxicity of the compounds against FM3A and U937 cancer cell lines increased in the following order: ETPFU > 5‐FU > poly(ETPFU) > poly(ETPFU‐co‐AA) > poly(ETPFU‐co‐VAc). The in vivo antitumour activities of all the polymers in Balb/C mice bearing the sarcoma 180 tumour cell line were greater than those of 5‐FU and monomer at the highest dose (800 mg kg^?1). © 2002 Society of Chemical Industry     

Structural effect of emulsifiers on the emulsion stability of a water/benzene mixture

Core–shell‐type microspheres with microphase‐separated shells of polystyrene (PS) and poly(ethylene glycol) (PEG) (microsphere_block: molar ratio: PS/PEG 49.1/45.9 mol %; M_w: PS chain: 1.07 × 10⁴, PEG chain 1.0 × 10⁴; the ratio of arm numbers of PEG to PS: 1.0; microsphere_graft: molar ratio: PS/PEG 33.8/55.9 mol %; M_w: PS chain: 1.54 × 10⁴, PEG chain 1.0 × 10⁴, the ratio of arm numbers of PEG to PS: 2.55) were synthesized by crosslinking of spherical domains of poly(2‐hydroxyethyl methacrylate) (PHEMA) and poly(4‐vinyl pyridine) (P4VP) of the microphase‐separated films of poly(ethylene glycol)‐block‐poly(2‐hydroxyethyl methacrylate)‐block‐polystyrene triblock terpolymer (M_n: 2.18 × 10⁴; molar ratio: PS 49.1 mol %, PHEMA 5.0 mol %, PEG 45.9 mol %) and polystyrene‐block‐[poly(4‐vinyl pyridine)‐graft‐poly(ethylene glycol)] block–graft copolymer (M_n: 4.56 × 10⁴; molar ratio: PS 33.8 mol %, P4VP 10.3 mol %, PEG 55.9 mol %; branch number of PEG: 2.55), respectively. The structures of microphase‐separated films were investigated by transmission electron microscopy and small‐angle X‐ray scattering. The effects of the arm number ratio of PS to PEG and the total arm number on the stability of the water/benzene emulsion were investigated. The emulsion stability of oil in water was improved by using the microsphere synthesized with the microsphere_graft. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 91: 321–331, 2004     

Synthesis and antitumour activity of medium molecular weight phthalimide polymers of camptothecin

Attachment of anticancer agents to polymers has been demonstrated to improve their therapeutic profiles. A new monomer containing camptothecin, 5‐norbonene‐endo‐2,3‐dicarboxylimidoundecanoyl‐camptothecin (NDUCPT) and its homopolymer and copolymer with acrylic acid (AA) were synthesized and spectroscopically characterized. The NDUCPT content in poly(NDUCPT‐co‐AA) obtained by elemental analysis was 51%. The average molecular weights of the polymers determined by gel permeation chromatography were as follows: M_n = 12 100, M_w = 23 400 g mol^?1, M_w/M_n = 1.93 for poly(NDUCPT), M_n = 15 400, M_w = 28 300 g mol^?1, M_w/M_n = 1.83 for poly(NDUCPT‐co‐AA). The IC₅₀ value of NDUCPT and its polymers against U937 cancer cells was larger than that of CPT. The in vivo antitumour activity of all polymers in Balb/C mice bearing the sarcoma 180 tumour cell line was greater than that of CPT at a dose of 100 mg kg^?1. Copyright © 2003 Society of Chemical Industry     

Preparation of high‐molecular‐weight poly(L‐lactic acid)‐based polymers through direct condensation polymerization in bulk state

Poly(L ‐lactic acid‐co‐succinic acid‐co‐1,4‐butanediol) (PLASB) was synthesized by a direct condensation copolymerization of L ‐lactic acid, succinic acid (SA), and 1,4‐butanediol (BD) in bulk state using titanium(IV) butoxide (TNBT) as a catalyst. Weight average molecular weight (M_w) of PLASB increased from 3.5 × 10⁴ to 2.1 × 10⁵ as the content of SA and BD went up from 0.01 to 0.5 mol/100 mol of L ‐lactic acid (LA). PLASB having M_w in the range from 1.8 × 10⁵ to 2.1 × 10⁵ showed tensile properties comparable to those of commercially available poly(L ‐lactic acid) (PLLA). In sharp contrast, homopolymerization of LA in bulk state produced PLLA with M_w as low as 4.1 × 10⁴, and it was too brittle to prepare specimens for the tensile tests. M_w of PLASB synthesized by using titanium(IV)‐2‐ethyl(hexoxide), indium acetate, indium hydroxide, antimony acetate, antimony trioxide, dibutyl tin oxide, and stannous‐2‐ethyl 1‐hexanoate was compared with that of PLASB obtained by TNBT. Ethylene glycol oligomers with different chain length were added to LA/SA in place of BD to investigate effect of chain length of ethylene glycol oligomers on the M_w of the resulting copolymers. Biodegradability of PLASB was analyzed by using the modified Sturm test. Toxicity of PLASB was evaluated by counting viable cell number of mouse fibroblast cells that had been in contact with PLASB discs. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 466–472, 2006     

Synthesis of star–comb‐shaped polymer with porphyrin‐core and its self‐assembly behavior study

5,10,15,20‐tetra(4‐hydroxyphenyl)porphyrin (THPP) was synthesized by the condensation of pyrrole with 4‐hydroxybenzaldehyde in the presence of solvent (propionic acid). Subsequently, the resulting THPP was converted to a tetrafunctional star‐shaped macroinitiator (porphyrin‐Br₄) by esterification of it with 2‐bromopropanoyl bromide, and then atom transfer radical polymerization (ATRP) of styrene was conducted at 110°C with CuCl/2,2′‐bipyridine as the catalyst system. The resulting product was reacted with NBS to obtain star‐shaped initiator porphyrin‐(PSt‐Br)₄, which was used the following ATRP of the GMA to synthesize star–comb‐shaped grafted polymer porphyrin‐(PSt‐g‐PGMA)₄. The number molecular weight was 2.3 × 10⁴ g/mol, and the dispersity was narrow (M_w/M_n = 1.32). The structure of the polymers was investigated by NMR, UV–vis, IR, and GPC measurement. The self‐assembly behavior of the polymer porphyrin‐(PSt‐g‐PGMA)₄ was studied by DLS and AFM. © 2012 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Novel polyisobutylene stars. XXIII. Thermal,mechanical, and processing characteristics of poly(phenylene ether)/polydivinylbenzene(polyisobutylene‐b‐polystyrene)37 blends

The objective of these investigations was to increase the use temperature of novel star‐block polymers consisting of a crosslinked polydivinylbenzene (PDVB) core from which radiate multiple poly(isobutylene‐b‐polystyrene) (PIB‐b‐PSt) arms, abbreviated by PDVB(PIB‐b‐PSt)_n. We achieved this objective by blending star‐blocks with poly(phenylene oxide) (PPO) that is miscible with PSt. Thus, various PPO/PDVB(PIB‐b‐PSt)_n blends were prepared, and their thermal, mechanical, and processing properties were investigated. The hard‐phase glass‐transition temperature of the blends could be controlled by the amount (wt %) of PPO. The blends displayed superior retention of tensile strengths at high temperatures as compared to star blocks. The melt viscosities of blends with low weight percentages of PPO were lower than those of star blocks. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 2866–2872, 2002     

The potential of Cu(I)Cl/2,2′‐bipyridine catalysis in a triblock copolymer preparation by atom transfer radical polymerization

The ability of atom transfer radical polymerization (ATRP) in the sequential synthesis of triblock copolymers was examined using Cu(I)Cl/2,2′‐bipyridine catalysis at 110°C in toluene, starting from PMMA macroinitiators terminated with the C‐Br group. The PMMAs were prepared by living anionic or group transfer polymerization (GTP), followed by bromination of the respective active site with Br₂ or N‐bromosuccinimide (NBS). The yield of the terminal bromination in the products of both living polymerizations was 60–64% at best, compared with the yield of the bromination of 1‐methoxy‐(1‐trimethylsilyloxy)prop‐1‐ene (a model of the GTP active site) with NBS, as found by ¹H‐NMR. The PMMA macroinitiators prepared were utilized to start the sequential ATRP, finally affording PMMA‐b‐PBuA‐b‐PSt (M_n 69,100), PMMA‐b‐PSt‐b‐PBuA (M_n 21,300) and PMMA‐b‐PSt‐b‐PMMA (M_n 35,200), which have not yet been synthesized by ATRP. After the second block has been formed, the Br‐unterminated part of PMMA macroinitiator was removed by extraction or repeated precipitation. In the third (last) sequence polymerization, induction periods were observed. The first two triblock copolymers were free of precursors and have M_w/M_n values 1.5–1.6 (SEC). In the course of the last step of PMMA‐b‐PSt‐b‐PMMA synthesis, the content of the PMMA‐b‐PSt precursor slowly decreased with increasing MMA conversion. Still, at ≈90% MMA conversion, about 10–15% of the precursor remained in the product. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 81: 3514–3522, 2001     

Polycondensation of lactic acid catalyzed by organic acid anhydrides

Poly(lactic acid) was prepared by the utilization of the acid anhydrides cis‐butenedoic anhydride, phthalic anhydride and pyromellitic dianhydride as catalysts. The effect of the amount of catalyst, temperature and reaction time on the polymerization was investigated in detail. The results show that the acid anhydride catalysts are very efficient in bulk polycondensation, giving poly(D ,L ‐lactic acid) with average molecular weights (M_w) of (1.7–2.3) × 10⁴ in high yield. Copyright © 2007 Society of Chemical Industry     

Synthesis and biological activity of medium range molecular weight polymers containing exo‐3,6‐epoxy‐1,2,3,6‐tetrahydrophthalimidocaproic acid

A new monomer, exo‐3,6‐epoxy‐1,2,3,6‐tetrahydrophthalimidocaproic acid (ETCA), was prepared by reaction of maleimidocaproic acid and furan. The homopolymer of ETCA and its copolymers with acrylic acid (AA) or with vinyl acetate (VAc) were obtained by photopolymerizations using 2,2‐dimethoxy‐2‐phenylacetophenone as an initiator at 25 °C. The synthesized ETCA and its polymers were identified by FTIR, ¹H NMR and ¹³C NMR spectroscopies. The apparent average molecular weights and polydispersity indices determined by gel permeation chromatography (GPC) were as follows: M_n = 9600 g mol^?1, M_w = 9800 g mol^?1, M_w/M_n = 1.1 for poly(ETCA); M_n = 14 300 g mol^?1, M_w = 16 200 g mol^?1, M_w/M_n = 1.2 for poly(ETCA‐co‐AA); M_n = 17 900 g mol^?1, M_w = 18 300 g mol^?1, M_w/M_n = 1.1 for poly(ETCA‐co‐VAc). The in vitro cytotoxicity of the synthesized compounds against mouse mammary carcinoma and human histiocytic lymphoma cancer cell lines decreased in the following order: 5‐fluorouracil (5‐FU) ≥ ETCA > polymers. The in vivo antitumour activity of the polymers against Balb/C mice bearing sarcoma 180 tumour cells was greater than that of 5‐FU at all doses tested. © 2001 Society of Chemical Industry     

Synthesis and characterization of polystyrene/poly(4‐vinylpyridine) triblock copolymers by reversible addition–fragmentation chain transfer polymerization and their self‐assembled aggregates in water

Reversible addition–fragmentation chain transfer polymerization (RAFT) was developed for the controlled preparation of polystyrene (PS)/poly(4‐vinylpyridine) (P4VP) triblock copolymers. First, PS and P4VP homopolymers were prepared using dibenzyl trithiocarbonate as the chain transfer agent (CTA). Then, PS‐b‐P4VP‐b‐PS and P4VP‐b‐PS‐b‐P4VP triblock copolymers were synthesized using as macro‐CTA the obtained homopolymers PS and P4VP, respectively. The synthesized polymers had relatively narrower molecular weight distributions (M_w/M_n < 1.25), and the polymerization was controlled/living. Furthermore, the polymerization rate appeared to be lower when styrene was polymerized using P4VP as the macro‐CTA, compared with polymerizing 4‐vinylpyridine using PS as the macro‐CTA. This was attributed to the different transfer constants of the P4VP and PS macro‐CTAs to the styrene and the 4‐vinylpyridine, respectively. The aggregates of the triblock copolymers with different compositions and chain architectures in water also were investigated, and the results are presented. Reducing the P4VP block length and keeping the PS block constant favored the formation of rod aggregates. Moreover, the chain architecture in which the P4VP block was in the middle of the copolymer chain was rather favorable to the rod assembly because of the entropic penalty associated with the looping of the middle‐block P4VP to form the aggregate corona and tailing of the end‐block PS into the core of the aggregates. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 1017–1025, 2003     

Preparation of poly(styrene‐b‐2‐hydroxyethyl acrylate) block copolymer using reverse iodine transfer polymerization

Reverse iodine transfer polymerizations (RITP) of 2‐h‐ydroxyethyl acrylate (HEA) were performed in N,N‐dimethylformamide at 75°C using AIBN as initiator. Poly(2‐hydroxyethyl acrylate) (PHEA) with M_n = 3300 g mol^?1 and M_w/M_n <1.5 were obtained. Homopolymerization of styrene in RITP was also carried out under similar conditions using toluene as solvent. The resulting iodo‐polystyrene (PS‐I) with (M_{n, SEC} = 607 g mol^?1, polydispersity index (PDI) = 1.31) was used as a macroinitiator for the synthesis of amphiphilic block copolymers based on HEA with controlled well‐defined structure. Poly(styrene‐b‐2‐hydroxyethyl acrylate) (PS‐b‐PHEA) with M_n = 13,000 g mol^?1 and polydispersity index (M_w/M_n) = 1.4 was obtained, copolymer composition was characterized using ¹H‐NMR and FTIR, whereas SEC and gradient HPLC were used to confirm the formation of block copolymer and the living character of polymer chains. © 2012 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Electrochemical preparation of poly(N‐acetylaniline)/poly‐(4‐styrenesulfonic acid‐co‐maleic acid) composite film towards ascorbic acid sensing

Poly(N‐acetylaniline)/poly(4‐styrenesulfonic acid‐co‐maleic acid) (PNAANI/PSSMA) composite film was prepared by cyclic voltammetry (CV), and was characterized by FTIR and X‐ray photoelectron spectrum (XPS). The electroactivity of the composite film was high in neutral and basic solutions, and it had been used for amperometric determination of ascorbic acid (AA). Compared with pure PNAANI film, the catalytic activity of the composite film was much better. AA was detected amperometrically in sodium citrate buffer at a potential of 0.3 V (versus SCE). The response current was proportional to the concentration of ascorbic acid in the range of 4.7 × 10^?6 to 5.0 × 10^?5M and 5.0 × 10^?5 to 2.5 × 10^?3M, respectively, with the detection limit of 1.9 × 10^?6 mol L^?1 at a signal to noise ratio 3. In addition, the stability and reusability of the composite film were performed well, and it was satisfying to be used for determination of AA in real fruit juice samples. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Porous biodegradable polyesters. I. Preparation of porous poly(L‐lactide) films by extraction of poly(ethylene oxide) from their blends

Porous poly(L ‐lactide) (PLLA) films were prepared by water extraction of poly(ethylene oxide) (PEO) from solution‐cast PLLA and PEO blend films. The dependence of blend ratio and molecular weight of PEO on the porosity and pore size of films was investigated by gravimetry and scanning electron microscopy. The film porosity and extracted weight ratio were in good agreement with the expected for porous films prepared using PEO of low molecular weight (M_w = 1 × 10³), but shifted to lower values than expected when high molecular weight PEO (M_w = 1 × 10⁵) was utilized. The maximum pore size was larger for porous films prepared from PEO having higher molecular weight, when compared at the same blending ratio of PLLA and PEO before water extraction. Differential scanning calorimetry of as‐cast PLLA and PEO blend films revealed that PLLA and PEO were phase‐separated at least after solvent evaporation. On the other hand, comparison of blend films before and after extraction suggested that a small amount of PEO was trapped in the amorphous region between PLLA crystallites even after water extraction and hindered PLLA crystallization during solvent evaporation. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 75: 629–637, 2000     

Synthesis of PEG‐functionalized poly(diphenylacetylene)s and their gas permeation properties

The polymerizations of 1‐(3‐methylphenyl)‐2‐(4‐trimethylsilyl)phenylacetylene ( 1a ) and 1‐(4‐methylphenyl)‐2‐(4‐trimethylsilyl)phenylacetylene ( 1b ) were carried out with TaCl₅‐n‐Bu₄Sn to give relatively high‐molecular‐weight polymers ( 2a and 2b ) (M_n > 5 × 10⁵). The obtained polymers were brominated by using benzoyl peroxide and N‐bromosuccinimide first, followed by substitution reaction of three types of polyethylene glycol. When diethylene glycol was used as a reagent on substitution reaction of meta‐substituted polymer, PEG‐functionalized poly(diphenylacetylene) with the highest content of oxyethylene unit [ 4a(2) ] was obtained, and the degree of substitution was 0.60. The degrees of substitution decreased to 0.15 and 0.08 when the polyethylene glycols with higher molecular weights were used. PEG‐substitution reaction to the para‐substituted polymers was difficult to proceed, and hence the degree of substitution was 0.18 even when diethylene glycol was used. The CO₂/N₂ separation factor of PEG‐functionalized polymer [ 4a(2) ] was as large as 28.8, although that of 2a was 7.41. The other PEG‐functionalized polymers also exhibited high CO₂ permselectivity, and their CO₂/N₂ separation factors were over 20. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Viscosity–molecular weight relationship for aminopropyl‐terminated poly(dimethylsiloxane)

Aminopropyl‐terminated poly(dimethylsiloxane) (ATPS) with different molecular weights was prepared by base‐catalyzed equilibration of octamethylcyclotetrasiloxane and 1,3‐bis(3‐aminopropyl)‐1,1,3,3‐tetramethyldisiloxane with different ratios. Their number‐average molecular weights (M_n) were determined by end–group analysis, and intrinsic viscosity ([η]) in toluene was measured with a Ubbelohde viscometer. A relationship between M_n and [η] was obtained for ATPS. For 1.0 × 10⁴ < M_n < 6.0 × 10⁴, it was in accord with [η]_{toluene,25°C} = 5.26 × 10^?2 M_n^0.587. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 80: 975–978, 2001     

Highly enhanced accelerating effect of melt‐recrystallized stereocomplex crystallites on poly(L‐lactic acid) crystallization: effects of molecular weight of poly(D‐lactic acid)

The effects of the molecular weight of poly(D ‐lactic acid) (PDLA), which forms stereocomplex (SC) crystallites with poly(L ‐lactic acid) (PLLA), and those of processing temperature T_p on the acceleration (or nucleation) of PLLA homocrystallization were investigated using PLLA films containing 10 wt% PDLA with number‐average molecular weight (M_n) values of 5.47 × 10⁵, 9.67 × 10⁴ and 3.67 × 10⁴ g mol^–1 (PDLA‐H, PDLA‐M and PDLA‐L, respectively). For the PLLA/PDLA‐H and PLLA/PDLA‐M films, the SC crystallites that were ‘non’‐melted and those that were ‘completely’ melted at T_p values just above their endset melting temperature and recrystallized during cooling were found to act as effective accelerating (or nucleation) agents for PLLA homocrystallization. In contrast, SC crystallites formed from PDLA‐L, having the lowest M_n, were effective accelerating agents without any restrictions on T_p. In this case, the accelerating effects can be attributed to the plasticizer effect of PDLA‐L with the lowest M_n. The accelerating effects of SC crystallites in the PLLA/PDLA‐H and PLLA/PDLA‐M films was dependent on crystalline thickness for T_p values below the melting peak temperature of SC crystallites, whereas for T_p values above the melting peak temperature the accelerating effects are suggested to be affected by the interaction between the SC crystalline regions and PLLA amorphous regions.     

Properties of aqueous salt solutions of poly(vinylpyrrolidone). II. Polymer dimensions and thermodynamic quantities

The unperturbed dimensions and thermodynamic parameters of poly(vinylpyrrolidone) (PVP) have been studied in aqueous salt solutions, e.g. phosphates, mono- and dihydrogen phosphates, carbonates, sulphates of sodium and potassium. Values of K₀ ( = [η]_ΘM^-1/2, where [η]_Θ is intrinsic viscosity at the theta temperature and M is molecular weight) with M_w = 78 000 g mol^-1 were found to range from 4·63×10^-4 to 5·56×10^-4 dl g^-1, and root-mean-square end-to-end distances, 〈r²〉₀^1/2, ranging from 1·61×10^-6 to 1·68×10^-6cm were evaluated. Values of the characteristic ratio, C_n, the steric parameter, σ, and the enthalpy and the entropy of dilution parameters, χ_H and χ_S, have also been calculated, and the interaction parameter was found to be χ-0·5<-0·001 for aqueous salt solutions of PVP. ©1997 SCI     

Electroreductive block copolymerization of dichlorosilanes in the presence of disilane additives

The electroreductive polymerization of dichloromethylphenylsilane in the presence of triphenylsilyl group‐containing disilanes such as hexaphenyldisilane followed by the electroreductive termination with chlorotriphenylsilane afforded triphenylsilyl group‐terminated polymethylphenylsilane in 15–32% yield. The isolated polymethylphenylsilane (M_n = 3350 g mol^?1, M_w/M_n = 1.4) was found to react as a macroinitiator to copolymerize with dibutyldichlorosilane under electroreductive conditions producing the corresponding block copolymer (M_n = 4730 g mol^?1, M_w/M_n = 1.2) in 38% yield. The ratio of monomer units (? MeSiPh? to? BuSiBu? ) of the copolymer was determined to be 75:25 using ¹H NMR analysis, which was in good agreement with the calculated ratio (74:26) on the assumption that molecular weight of the macroinitiator was not changed. The block structure of the resulting copolymer, poly(methylphenylsilane)‐block‐poly(dibutylsilane), was also confirmed by comparing its ¹H NMR and UV absorption spectra with those of polymethylphenylsilane, polydibutylsilane and a statistical copolymer prepared by electroreductive polymerization of dichloromethylphenylsilane with dibutyldichlorosilane. This method is applicable to the preparation of other types of macroinitiator such as triphenylsilyl group‐terminated polydibutylsilane, and polydibutylsilane‐block‐polymethylphenylsilane was also obtained using this macroinitiator. Copyright © 2011 Society of Chemical Industry