Performance and capacity fading reason of LiMn<Subscript>2</Subscript>O<Subscript>4</Subscript>/graphite batteries after storing at high temperature

Spinel LiMn₂O₄ was synthesized by a solid-state method. A 204468-size battery was fabricated and stored at 55°C. The structure and morphology of the LiMn₂O₄ cathode were analyzed by X-ray diffraction (XRD) and scanning electron microscopy (SEM) technique. Energy dispersive spectroscopy (EDS) was used to analyze the surface component of the carbon anode. The discharge capacities of LiMn₂O₄ stored for 0, 24, 48, and 96 h are 106, 98, 96, and 92 mAh·g⁻¹, respectively. The cyclic performance is improved after storage. The capacity retentions of LiMn₂O₄ stored for 0, 24, 48, and 96 h are 83.8%, 85.8%, 86.9%, and 88.6% after 180 cycles. The intensity of all the LiMn₂O₄ diffraction peaks is weakened. Mn is detected from the carbon electrode when the battery is stored for 96 h. Cyclic voltammograms and electrochemical impedance spectroscopy (EIS) were used to examine the surface state of the electrode after storage. The results show that the resistance and polarization of LiMn₂O₄/electrolyte is increased after storage, which is responsible for the fading of capacity.     

A literature review and test: Structure and physicochemical properties of spinel LiMn2O4 synthesized by different temperatures for lithium ion battery

A series of LiMn₂O₄ spinel was prepared by adipic acid-assisted sol–gel method at different temperatures. The structure and physicochemical properties of spinel LiMn₂O₄ synthesized by different temperatures were investigated by differential thermal analysis (DTA) and thermogravimetery (TG), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), scanning electron micrographs (SEM), inductively coupled plasma-mass spectroscopy (ICP-MS), galvanostatic charge–discharge test, and cyclic voltammetry (CV), respectively. TG–DTA shows that the weight loss occurs in four temperature regions during the synthesis of LiMn₂O₄. XRD indicates that the sintering temperature affects the formation of spinel phase, and prominent LiMn₂O₄ spinel powder with smaller atom location confusion forms about 800 °C. XPS reveals that the manganese oxidation state in spinel lithium manganese oxide synthesized at different temperatures is between +3 and +4. SEM shows that LiMn₂O₄ spinel synthesized at 800 °C has the uniform, nearly cubic structure morphology with narrow size distribution. ICP-MS indicates that the average chemical valence of Mn element of LiMn₂O₄ synthesized at 800 °C is the most close to 3.5 among the samples synthesized at different temperatures. CV illustrates that the LiMn₂O₄ synthesized at 800 °C has the best electrochemical activity. Charge–discharge test explains that the capacity retention sintered at 350, 700 and 800 °C over the first 50 cycles is 93.6%, 86.1% and 85.2%, respectively, but the discharge capacity at the 50th cycle is 82.2, 104.8 and 110.8 mAh g⁻¹, respectively.     

Preparation and property of spinel LiMn2O4 material by co-doping anti-electricity ions

1 Introduction At present, LiCoO2 is almost the only cathode material of Li-ion batteries, which can be used in large-scale commercialization, because such material possesses high specific capacity, ease of preparation, high discharging flat and favorable…     

Hydrothermal synthesis of MnCO3 nanorods and their thermal transformation into Mn2O3 and Mn3O4 nanorods with single crystalline structure

MnCO₃ nanorods with diameters of 50-150 nm and lengths of about 1-2 μm have been prepared for the first time by a facile hydrothermal method. Mn₂O₃ and Mn₃O₄ nanorods were obtained via the heat-treatment of the MnCO₃ nanorods in air and nitrogen atmosphere, respectively. The morphology and structure of the as-synthesized MnCO₃, Mn₂O₃ and Mn₃O₄ nanorods were characterized by X-ray diffraction, scanning electron microscopy, transmission electron microscopy and selected area electron diffraction. It was found that the MnCO₃ nanorods are single-crystalline, and their morphology and single-crystalline characteristic can be sustained after thermal transformation into Mn₂O₃ and Mn₃O₄. The corresponding growth directions for MnCO₃, Mn₂O₃ and Mn₃O₄ nanorods were [2 1 4], [1 0 0] and [1 1 2], respectively. When applied as anode materials for lithium ion batteries, the Mn₂O₃ and Mn₃O₄ nanorods exhibited a reversible lithium storage capacity of 998 and 1050 mAh/g, respectively, in the first cycles.     

Characterization of rapid thermally processed LiMn204 thin films derived from solution deposition

Cathode material LiMn₂O₄ thin films were prepared through solution deposition followed by rapid thermal annealing. The phase identification and surface morphology were studied by X-ray diffraction and scanning electron microscopy. Electrical and electrochemical properties were examined by four-probe method, cyclic voltammetry and galvanostatic charge-discharge experiments. The results show that the film prepared by this method is homogeneous, dense and crack-free. As the annealing temperature and annealing time increase, the electronic resistivity decreases, while the capacity of the films increases generally. For the thin films annealed at different temperatures for 2 min, the thin film annealed at 800 °C has the best cycling behavior with the capacity loss of 0.021% per cycle. While for the thin films annealed at 750 °C for different times, the film annealed for 4 min possesses the best cycling performance with a capacity loss of 0.025% per cycle. For the lithium diffusion coefficient in LiMn₂O₄ thin film, its magnitude order is 10⁻¹¹ cm²·s⁻¹.     

Electrochemical properties of high-power lithium ion batteries made from modified spinel LiMn2O4

A prismatic 204056-type high power lithium-ion battery was developed. Modified LiMn₂O₄ and carbonaceous mesophase sphere (CMS) were adopted as the cathode and anode, respectively. The effects of proportion of conductive carbon black in cathode and the rest time after discharge on the electrochemical properties of batteries were investigated. The electrochemical tests show that the proportion of conductive carbon black in cathodes affects the high rate capability and discharge voltage plateau distinctly. The battery with 3.0% of conductive carbon black in cathode shows excellent electrochemical performances when being charged/discharged within 2.5?4.2 V at room temperature. The discharge capacity at 20C rate is 94.4% of that at 1C rate, and the capacity retention ratio charged at 1C and discharged at 5C is 86.6% after 390 cycles at room temperature. The test result of impulse discharge at 50C for 5 s shows that the battery has outstanding high rate discharge performance when the battery is in the depth of charge of 90%, 75%, 60%, 45%, 30% and 15%. The battery also shows good charge performance. When the battery is charged at 0.5C, 1C, 2C and 4C, the ratios of capacity for constant current charge are 98.4%, 96.4%, 91.0% and 72.9% of the whole charge capacity, respectively. In addition, the rest time after discharge affects the cycle performance distinctly when the battery is discharged at high rate.     

Improvement of the electrochemical performance of LiMn2O4 cathode active material by lithium borosilicate (LBS) surface coating for lithium-ion batteries

The LBS coating on the surface of spinel LiMn₂O₄ powder was carried out using the solid-state method, followed by heating at 425 °C for 5 h in air. The powder X-ray diffraction pattern of the LBS-coated spinel LiMn₂O₄ showed that the LBS coating medium was not incorporated in the spinel bulk structure. The SEM result showed that the LBS coating particles were homogeneously distributed on the surface of the LiMn₂O₄ powder particles. The effect of the lithium borosilicate (LBS) coating on the charge-discharge cycling performance of spinel powder (LiMn₂O₄) was studied in the range of 3.5-4.5 V at 1C. The electrochemical results showed that LBS-coated spinel exhibited a more stable cycle performance than bare spinel. The capacity retention of LBS-coated spinel was more than 93.3% after 70 cycles at room temperature, which was maintained at 71.6% after 70 cycles at 55 °C. The improvement of electrochemical performance may be attributed to suppression of Mn²⁺ dissolution into the electrolyte via the LBS glass layer.     

Supercritical-hydrothermal accelerated solid state reaction route for synthesis of LiMn2O4 cathode material for high-power Li-ion batteries

Synthesis of the spinel structure lithium manganese oxide (LiMn₂O₄) by supercritical hydrothermal (SH) accelerated solid state reaction (SSR) route was studied. The impacts of the reaction pressure, reaction temperature and reaction time of SH route, and the calcination temperature of SSR route on the purity, particle morphology and electrochemical properties of the prepared LiMn₂O₄ materials were studied. The experimental results show that after 15 min reaction in SH route at 400 °C and 30 MPa, the reaction time of SSR could be significantly decreased, e.g. down to 3 h with the formation temperature of 800 °C, compared with the conventional solid state reaction method. The prepared LiMn₂O₄ material exhibits good crystallinity, uniform size distribution and good electrochemical performance, and has an initial specific capacity of 120 mA·h/g at a rate of 0.1C (1C=148 mA/g) and a good rate capability at high rates, even up to 50C.     

Fabrication of LiMn2O4 thin film cathode from chitosan-containing solution

Thin film of spinel LiMn₂O₄ was obtained by spin coating the chitosan-containing precursor solution on a platinumized Si substrate, followed by a two-step annealing procedure at 300 and 700 °C, respectively. It was demonstrated that the addition of the appropriate amount of chitosan to the precursor solution enhanced the deposition of LiMn₂O₄ films. The thickness of the deposited film from chitosan-containing precursor solution is about 5.2 μm after five-time spin coating under a spinning speed of 2500 rpm. Without the addition of chitosan in precursor solution, the deposited film was as thin as 0.16 μm under the same processing parameters. Furthermore, the electrochemical behavior for the deposited LiMn₂O₄ film calcined at 700 °C for 1 h was characterized by the charge–discharge test. The result shows that the 1st discharge capacity is 56.31 μAh cm⁻² μm⁻¹ at a discharge rate of C/2 and the fading rate of the discharge capacity is only 0.19% cycle⁻¹ after 50 cycles.     

Effects of protecting layer [Li,La]TiO3 on electrochemical properties of LiMn2O4 for lithium batteries

A sample of LiMn₂O₄ spinel oxide was surface-modified with lithium lanthanum titanate ([Li,La]TiO₃), which was developed as a lithium ionic conductor, by means of hydrothermal processing and subsequent heat treatment at 400 °C. The surface coating layers were analyzed by morphology observation using a transmission electron microscopy. Energy-dispersive spectrometry and X-ray photoelectron spectroscopy were used for element investigation. The surface modification effects on rate capability during cycling and capacity retention for the LiMn₂O₄ spinel oxide were confirmed. Then Mn dissolution during storage at elevated temperatures of the pristine, coated sample was characterized. The Mn dissolution characterization was based on the idea that Mn dissolution is one of the most significant reasons for capacity loss for LiMn₂O₄ spinel oxide, and this phenomenon is especially severe at elevated temperatures. Our experimental results indicate that the surface-modified sample shows much a better initial capacity and rate capability compared with the pristine sample. The [Li,La]TiO₃ coating effectively enhances the structural stability of LiMn₂O₄ at elevated temperatures, most likely because the [Li,La]TiO₃-modifying layers play a definitive role in suppressing Mn dissolution in the electrolyte during storage.     

Fabrication and magnetic properties of NiFe<Subscript>2</Subscript>O<Subscript>4</Subscript> nanorods

NiFe₂O₄ nanorods have been successfully synthesized via thermal treatment of the rod-like precursor fabricated by Ni-doped α-FeOOH, which was enwrapped by the complex of citric acid and Ni²⁺. The morphology evolution during the calcination of the precursor nanorods was investigated with transmission electron microscopy (TEM), and the phase and the magnetic properties of samples were analyzed through X-ray diffraction (XRD) and vibrating sample magnetometer (VSM). The results indicated that the diameter of the NiFe₂O₄ nanorods obtained ranged between 30 and 50 nm, and the length ranged between 2 and 3 μm. As the calcination temperature was up to 600°C, the coercivity, saturation magnetization, and remanent magnetization of the samples were 36.1 kA·m⁻¹, 27.2 A·m²·kg⁻¹, and 5.3 A·m²·kg⁻¹, respectively. The NiFe₂O₄ nanorods prepared have higher shape anisotropy and superior magnetic properties than those with irregular shapes.     

Synthesis and electrochemical performance of LiMn<Subscript>x</Subscript>Fe<Subscript>x−1</Subscript>PO<Subscript>4</Subscript>/C cathode material for lithium secondary batteries

Carbon-coated LiMn_0.8Fe_0.2PO₄/C (C = 5 wt.%, 10 wt.%, 15 wt.%, and 20 wt.%) cathode material is synthesized using a solid-state method. No impurity is found within the synthesized active material, which is confirmed to have an olivine structure with particle sizes in the range of 100 nm to 200 nm. The LiMn_0.8Fe_0.2PO₄/C (C = 10 wt.%) active material shows an outstanding discharge capacity of 121.7 mAh·g⁻¹, along with a high capacity maintenance rate of 87.9 % at 2 C against the 0.2 C rate. In addition, this sample shows the most outstanding discharge capacity and coulombic efficiency in the cycling performance tests.     

Synthesis and characterization of Li<Subscript>1.3</Subscript>Al<Subscript>0.3</Subscript>Ti<Subscript>1.7</Subscript>(PO<Subscript>4</Subscript>)<Subscript>3</Subscript>-coated LiMn<Subscript>2</Subscript>O<Subscript>4</Subscript> by wet chemical route

Li_1.3Al_0.3Ti_1.7(PO₄)₃-coated LiMn₂O₄ was prepared by wet chemical route. The phase, surface morphology, and electrochemical properties of the prepared powders were characterized by X-ray diffraction, scanning electron micrograph, and galvanostatic charge-discharge experiments. Li_1.3Al_0.3Ti_1.7(PO₄)₃-coated LiMn₂O₄ has similar X-ray diffraction patterns as LiMn₂O₄. The corner and border of Li_1.3Al_0.3Ti_1.7(PO₄)₃-coated LiMn₂O₄ particles are not as clear as the uncoated one. The two powders show similar values of lithium-ion diffusion coefficient. When cycled at room temperature and 55°C for 40 times at the charge-discharge rate of 0.2C, Li_1.3Al_0.3Ti_1.7(PO₄)₃-coated LiMn₂O₄ shows the capacity retentions of 98.2% and 93.9%, respectively, which are considerably higher than the values of 85.4% and 79.1% for the uncoated one. Both the capacity retention differences between Li_1.3Al_0.3Ti_1.7(PO₄)₃-coated LiMn₂O₄ and LiMn₂O₄ cycling at room temperature and 55°C become larger with the increase of charge-discharge rate. When the charge-discharge rate reaches 2C, the capacity retention of LATP-coated LiMn₂O₄ becomes 8.4% higher than the uncoated LiMn₂O₄ for room temperature cycling, and it becomes 11.1% higher than the latter when cycled at 55°C.     

Effects of chromium doping on performance of LiNi0.5Mn1.5O4 cathode material

In order to improve the cycle and rate performance of LiNi_0.5Mn_1.5O₄, LiCr_2YNi_0.5–YMn_1.5–YO₄ (0≤Y≤0.15) particles were synthesized by the sucrose-aided combustion method. The effects of Cr doping in LiNi_0.5Mn_1.5O₄ on the structures and electrochemical properties were investigated. The samples were characterized by X-ray diffractometry (XRD), scanning electron microscopy (SEM), cyclic voltammetry (CV), galvanostatic charge-discharge test and electrochemical impedance spectrum (EIS). The results indicate that the LiCr_2YNi_0.5–YMn_1.5–YO₄ possess a spinel structure and small particle size, and LiCr_0.2Ni_0.4Mn_1.4O₄ exhibits the best cyclic and rate performance. It can deliver discharge capacities of 143 and 104 mA·h/g at 1C and 10C, respectively, with good capacity retention of 96.5% at 1C after 50 cycles.     

Synthesis and electrochemical performance of YF<Subscript>3</Subscript>-coated LiMn<Subscript>2</Subscript>O<Subscript>4</Subscript> cathode materials for Li-ion batteries

Spinel LiMn₂O₄ cathodes were coated with 1 mol% YF₃. X-ray diffraction (XRD) analyses showed that Y and/or F did not enter the lattice of the LiMn₂O₄ crystal. Transmission electron microscopy (TEM) showed that a compact YF₃ layer of 5–20 nm in thickness was coated onto the surface of LiMn₂O₄ particles. Scanning electron microscopy (SEM) observation showed that the YF₃ coating caused the agglomeration of LiMn₂O₄ particles. The cycling test demonstrated that the YF₃ coating can improve the electrochemical performance of LiMn₂O₄ at both 20 and 55°C. Moreover, YF₃-coated LiMn₂O₄ exhibited an improved rate capability compared with the uncoated one at high rates over 5C. The immersion test in electrolytes showed that YF₃-coated LiMn₂O₄ is more erosion resistant than the uncoated one.     

Phase transition of lithiated-spinel Li2Mn2O4 at high temperature

1 Introduction Lithium manganese oxides are the most attractive cathode materials for rechargeable lithium-ion batteries because of their low-cost and less toxicity when compared with either cobaltates or nickelates[1?3]. Among these oxides, the spinel-fr…     

Enhancement of lithium storage capacity and rate performance of Se-modified MnO/Mn3O4 hybrid anode material via pseudocapacitive behavior

To improve rate and cycling performance of manganese oxide anode material, a precipitation method was combined with thermal annealing to prepare the MnO/Mn₃O₄/SeO_x (x=0, 2) hybrid anode by controlling the reaction temperature of Mn₂O₃ and Se powders. At 3 A/g, the synthesized MnO/Mn₃O₄/SeO_x anode delivers a discharge capacity of 1007 mA·h/g after 560 cycles. A cyclic voltammetry quantitative analysis reveals that 89.5% pseudocapacitive contribution is gained at a scanning rate of 2.0 mV/s, and the test results show that there is a significant synergistic effect between MnO and Mn₃O₄ phases.     

Nanocrystalline LiMn2O4 thin film cathode material prepared by polymer spray pyrolysis method for Li-ion battery

Nanocrystalline cubic spinel lithium manganese oxide thin film was prepared by a polymer spray pyrolysis method using lithium acetate and manganese acetate precursor solution and polyethylene glycol-4000 as a polymeric binder. The substrate temperature was selected from the thermogravimetric analysis by finding the complete crystallization temperature of LiMn₂O₄ precursor sample. The deposited LiMn₂O₄ thin films were annealed at 450, 500 and 600 °C for 30 min. The thin film annealed at 600 °C was found to be the sufficient temperature to form high phase pure nanocrystalline LiMn₂O₄ thin film. The formation of cubic spinel thin film was confirmed by X-ray diffraction study. Scanning electron microscopy and atomic force microscopy analysis revealed that the thin film annealed at 600 °C was found to be nanocrystalline in nature and the surface of the films were uniform without any crack. The electrochemical charge/discharge studies of the prepared LiMn₂O₄ film was found to be better compared to the conventional spray pyrolysed thin film material.     

Microwave synthesis, structure, and magnetic properties of quasi-one-dimensional complex oxide Sr4LiMn2O9

The complex oxide Sr₄LiMn₂O₉ belonging to the A_3n+3mA′_nMn_3m+nO_9m+6n family (m = 3, n = 1) was prepared from a mixture of SrCO₃ and LiMn₂O₄ in a microwave furnace by the solid state reaction. The results of structural refinements and magnetic properties are presented. The crystal structure of Sr₄LiMn₂O₉ was solved using simultaneously X-ray and neutron diffraction data with the GSAS program in the space group P321 with unit cell parameters: a = 9.5721(7) Å, c = 7.8264(5) Å, V = 621.025 Å³, Z = 3. Sr₄LiMn₂O₉ was found to contain 2 independent 1D chains of face-shared polyhedrons with a sequence of two octahedrons and one trigonal prism. The chains are separated by strontium cations. The refinement results show that the octahedrons and trigonal prisms in the first chain orderly contain Mn and Li, respectively, whereas the second chain is characterized by mixed occupation of these structural positions. The temperature dependence of the magnetic susceptibility of Sr₄LiMn₂O₉ was found to be due to antiferromagnetically coupled dimers from magnetic Mn cations.     

Controlled crystallite orientation in ZnO nanorods prepared by chemical bath deposition: Effect of H2O2

ZnO nanorods with controlled crystallite orientation are grown on glass substrate by chemical bath deposition (CBD) method via hydrogen peroxide (H₂O₂) route. The crystallite orientation in the film is successfully controlled by varying content of H₂O₂ in the bath solution. The crystallites became increasingly oriented as content of H₂O₂ in the bath solution increased, resulting in the formation of vertically aligned ZnO nanorods. The possible growth mechanism for the vertically aligned ZnO nanorods is proposed. The influence of content of H₂O₂ in the bath solution on structural, surface morphological, electrical and optical properties is studied and reported.