共查询到20条相似文献,搜索用时 62 毫秒
1.
不同种类的生物质原料可通过热转化的方式制备生物炭,由于其独特的特性被广泛应用于不同的研究领域。近期,随着生物炭合成方法的大规模涌现,生物炭及生物炭基材料相关的研究广受关注。总结了生物炭基催化剂在生物柴油制备(酯交换/酯化反应)过程中的研究现状,简要描述了生物炭催化剂的设计和合成方法,并总结了生物炭催化剂在制备生物柴油中的应用,最后归纳了生物炭基催化剂在生物柴油制备中存在的问题,对今后的研究重点及前景做出展望,以期为将来低成本生物炭基催化剂的制备以及生物柴油合成的研究和发展提供指导建议。 相似文献
2.
3.
4.
超声波制备生物柴油技术的研究进展 总被引:1,自引:0,他引:1
超声波技术作为一门新兴的技术已受到普遍关注.文章综述了近年来国内外超声波技术在生物柴油制备中应用的研究现状、制备原理和优缺点,指出了该技术在生物柴油制备中须要解决的问题,在此基础上提出超声波制备生物柴油技术的发展方向,认为开发更优良的的制备工艺是今后超声波制备生物柴油技术研究领域的主要任务. 相似文献
5.
利用地沟油制备生物柴油,实现资源的再利用,能带来较高的经济、环境和社会效益.综述了地沟油制备生物柴油的方法,并对利用地沟油制备生物柴油的技术推广存在的问题和相关对策进行了简要分析. 相似文献
6.
7.
简要介绍了生物柴油的主要制备方法和燃料特性,综述了生物柴油对车用柴油机的低温起动性能、动力性、经济性,排放特性以及燃烧特性影响的研究进展,阐述了近期针对生物柴油研究的新对象和新方法,并探讨了生物柴油的应用前景。 相似文献
8.
9.
GW050101 麻风树油进行膳肪酶催化酯交换制备生物柴油.S SHAN,SHARMA S,GUPTA M N.Energy and Fuels,;GW050102 用于制取生物柴油的各种均相催化剂的比较.VICENTE G,MARTINEz M,ARZCIL J.Bioresouroe Technology;…… 相似文献
10.
11.
煤催化热解过程动力学的研究 总被引:4,自引:0,他引:4
由WRT-2型热天平测定上海市工业用煤在添加不同类型催化剂(或氧化剂)时的热解曲线,由此确定不同催化剂添加量时的热解动力学参数(表观活化能E,频率因子K0,反应级数n),并根据动力学参数的变化规律建立催化热解模型。试验结果表明:催化剂可促进煤热解过程的发生,但不能使挥发份产量提高;氧化剂的效果不如催化剂;热解过程中,热重微分曲线上的峰值点所对应的温度Tmax可作为判断催化剂效能的特征参数;Tmax 相似文献
12.
介绍了NBMS离线磁分离技术的原理和工艺流程.采用该技术得到的低磁剂上的重金属含量均有不同程度的下降,微反活性均有所提高。收率为28.3%和40.2%的低磁剂微反活性较平衡剂提高6-7个单位。综合考虑,当低磁剂收率为40.2%时可以取得较好的效益。将低磁剂与新鲜剂以1:5的比例加入系统后,产品质量和产品分布可维持不变.再生后催化剂活性可维持在60左右。催化剂单耗由1.108kg/t降至O.9kg/t,每年可减购新鲜剂120t。同时还相应减少了制造新鲜剂对原材料资源的消耗和制造过程中带来的废水污染。 相似文献
13.
借助高温条件,使金属或金属氧化物熔融成为均匀分布的混合物,以形成合金固溶体,甚至形成氧化物固溶体,冷却后粉碎或再进行其他处理来制备催化剂的过程称为熔融法.熔融法通常用于制备骨架金属催化剂和熔铁催化剂.骨架金属催化剂的制备包括合金的制备、合金的展开、活化和储存等过程.本文综述了熔融法在骨架镍、骨架铜、骨架钴催化剂及熔铁催化剂制备中应用和新进展,尤其综述了熔融-淬冷、熔融-多级雾化、熔融-超声雾化新工艺在制备骨架金属催化剂中的应用,介绍了在骨架金属催化剂中添加微量其他元素的作用原理.骨架镍催化剂主要用于加氢反应,骨架铜催化剂主要用于脱氢、水合、氧化脱卤、脱硫反应,骨架钴催化剂主要用于加氢和费托合成反应,熔铁催化剂主要用于合成氨和费托合成反应.指出熔融法虽然能耗高,但在骨架金属催化剂和熔铁催化剂的制备中具有不可替代的作用.近年来,随着科技的进步,通过与其他方法的结合,熔融法也在不断发展和进步之中. 相似文献
14.
上世纪90年代,KBR将新型钌基催化剂成功应用于氨合成工业生产,并且形成以钌基催化剂为核心的KAAP工艺。钌基催化剂由于其远高于铁基催化剂的活性特征,已经在提高产量、降低能耗方面显示出无可比拟的优越性能。钌基催化剂作为氨合成第二代催化剂,与铁基催化剂相比,具有活性高,使用寿命长,操作条件相对缓和等优点,国内已经开发成功,但未见工业化应用报道。针对某大型氨厂氨合成回路扩能改造,提出对现有3个合成塔中的第三塔进行改造,改造后第三塔装填钌基催化剂,催化剂床层由一个增加为两个,床层之间有换热器。应用模拟软件Aspen Plus对该方案进行模拟研究,并与现有改造方案进行对比分析。结果表明,本方案在不新增合成塔数量的前提下,即可实现提高液氨产能35%的目标;改造后的3个合成塔运行参数满足工业生产要求,钌基催化剂在较高氨含量下仍然表现出优异的活性;与现有新增合成塔的改造方案相比,本改造方案在成本方面具有较大的经济优势。 相似文献
15.
费托合成反应是煤、甲烷和生物质等非油基碳资源转化制高品质液体燃料或化学品的重要途径。以生物质基合成气为原料,利用传统的Fe、Co催化剂制备生物燃料引起普遍关注。本文简要总结了近年来高性能Fe基和Co基费托合成催化剂的发展,以及近年来新型材料和核壳结构的双功能催化剂在费托合成中的应用。重点关注了生物质合成气方面的应用,比较了Fe、Co催化剂在该应用中的特点。虽然Co基催化剂较Fe基催化剂有更好的活性,但在BTL(Biomass-To-Liquid)过程中需要考虑多种因素,Fe基催化剂可能更具优势,开发廉价高性能的Fe基催化剂可能成为BTL-FT催化剂的发展方向。 相似文献
16.
Siringul Ay Murat Ozdemir Mehmet Melikoglu 《International Journal of Hydrogen Energy》2021,46(24):12857-12873
Cu/ZnO/Al2O3-based catalysts for methanol synthesis are prepared through co-precipitation by addition of Mg and Cr. Precursors are characterized by XRD and Air-TGA. Catalysts, calcined at 450 °C, are examined by XRD and BET. Reduction characteristics of the catalysts are analyzed via H2-TPR and H2-TGA. Surface acidity of the catalysts is determined by TPAD-TGA. Addition of Mg and Cr causes formation of smaller CuO crystallite size, and increases surface area of catalysts by improving dispersion of CuO. Cr also improves stability of the catalysts against ambient conditions and prolongs their shelf life. The catalyst containing 6.4 mol % Cr has a methanol selectivity of 83.5% and a catalytic activity of 14.2 g methanol production which is the highest among other synthesized catalysts. High Cr loadings (32 mol %) reduce the catalytic activity. Cr containing catalysts continue to produce the highest amounts of methanol as compared with the catalysts without Cr where Cr prevents deactivation and sintering. 相似文献
17.
Hydrotalcite is a double layered lamellar clay and is used as a catalyst precursor due to its structural properties. Hydrotalcite derived catalysts for hydrogen production through different processes have been reviewed. Recent developments of catalysts for hydrogen production are discussed accordingly. A brief introduction to structure and different synthesis routes of hydrotalcite based catalysts is also included. Article is focused on hydrotalcite derived catalysts consisting of different metals like Fe, Ni, Cu, Pt etc. and their performances in hydrogen production at different conditions. Use of such catalysts in hydrogen production process like steam reforming, sorption enhanced based generation, and various other applications is reviewed critically. Pros and cons of catalysts are discussed in detail. The scope and challenges in development of the hydrogen production process have been detailed out focusing modified hydrotalcite derived catalyst and process conditions. 相似文献
18.
19.
The microwave irradiation technique was used to prepare platinum and platinum–ruthenium-based electrocatalysts on Vulcan for PEMFCs. The effects of microwave duration, base concentration and surfactant/precursor ratios on the properties of Pt-based catalysts were investigated. The prepared Pt-based catalysts were characterized by XRD and then PEMFC tests were performed. The particle sizes of the catalysts were ranging between 2 and 6 nm. Platinum–ruthenium-based catalysts were prepared to improve the carbon dioxide tolerance of the PEMFCs. The power losses arising from carbon dioxide in hydrogen feed were decreased by using the prepared PtRu-based catalysts when 30% carbon dioxide including hydrogen was sent to the fuel cell. 相似文献