Red,green and blue-violet emission coexistence in white-light-emitting Ca3SiO4Cl2:Bi3+, Li+, Eu2+, Eu3+ phosphor

A series of emission-tunable Ca₃SiO₄Cl₂:Bi³⁺, Li⁺, Euⁿ⁺(n =2, 3) (CSC:Bi³⁺, Li⁺, Euⁿ⁺) phosphors have been synthesized via sol-gel method. The X-ray diffraction results indicate that the as-synthesized phosphors crystallize in a low temperature phase with the space group of P21/c. Energy transfer from Bi³⁺ to Eu³⁺/Eu²⁺ exists in CSC:Bi³⁺, Li⁺, Euⁿ⁺ phosphors. Under the excitation of 327 or 365 nm, the Ca_2.98−ySiO₄Cl₂:0.01Bi³⁺, 0.01Li⁺, yEuⁿ⁺(y=0.0001–0.002) phosphors show an intense green emission band around 505 nm, while under the excitation of 264 nm, three emission bands centered around 396 nm (Bi³⁺), 505 nm (Eu²⁺) and 614 nm (Eu³⁺) are observed and tunable colors from blue-violet to green or white are achieved in these phosphors by varying the content of Eu. White-light emission with the color coordinate (0.312, 0.328) is obtained in Ca_2.978SiO₄Cl₂:0.01Bi³⁺, 0.01Li⁺, 0.002Euⁿ⁺(n =2, 3). Based on these results, the as-prepared CSC:Bi³⁺, Li⁺, Eu²⁺, Eu³⁺ phosphors can act as color-tunable and single-phase white emission phosphors for potential applications in UV-excited white LEDs.     

White light emitting from YVO4/Y2O3:Eu3+,Bi3+ composite phosphors for UV light-emitting diodes

A series of (1−x)YVO₄/xY₂O₃:Eu³⁺_0.006,Bi³⁺_0.006 (0≤x≤0.54) composite phosphors was synthesized in one step by high temperature solid state reaction and the photoluminescence properties were investigated. By means of co-doping Eu³⁺ and Bi³⁺ ions into the composite matrices composed of YVO₄ and Y₂O₃ crystals, the YVO₄/Y₂O₃:Eu³⁺,Bi³⁺ phosphor exhibits simultaneously the blue (418 nm), green (540 nm) and orange-red (595, 620 nm) emissions. The broad blue and green emissions are attributed to the ³P₁–¹S₀ transitions of Bi³⁺ ion both in Y₂O₃ and in YVO₄ matrices. Moreover, the sharp orange-red emissions are attributed to the ⁵D₀–⁷F_1,2 transitions of Eu³⁺ ion in YVO₄ matrix. By tuning the mole ratio of YVO₄/Y₂O₃ matrices the white light-emitting could be obtained. The results indicated that when the mole ratio of Y₂O₃ (x) is at 0.11–0.54 mol, the (1−x)YVO₄/xY₂O₃:Eu³⁺_0.006,Bi³⁺_0.006 phosphors emit white light by combining the blue, green and orange-red emissions under the excitation of 360–370 nm wavelength which matches the emission of the commercial UV-LED diode. This implies that the phosphors may be the promising white light materials with broad absorption band for white light-emitting diodes.     

Energy transfer and multicolor tunable emission in single-phase Tb3+, Eu3+ co-doped Sr3La(PO4)3 phosphors

A series of green-to-red color-tunable Sr₃La(PO₄)₃:Tb³⁺, Eu³⁺ phosphors were prepared by high temperature solid-state method. The crystal structures, photoluminescence properties, fluorescence lifetimes, and energy transfer of Sr₃La(PO₄)₃:Tb³⁺, Eu³⁺ were systematically investigated in detail. The obtained phosphors show both a green emission from Tb³⁺ and a red emission from Eu³⁺ with considerable intensity under ultraviolet (UV) excitation (~377 nm). The emission colors of the phosphors can be tuned from green (0.304, 0.589) through yellow (0.401, 0.505) and eventually to red (0.557, 0.392) due to efficient Tb³⁺-Eu³⁺ energy transfer (ET). The Tb³⁺→Eu³⁺ energy transfer process was demonstrated to be quadrupole-quadrupole mechanism by Inokuti-Hirayama model, with maximum ET efficiency of 86.3%. The results indicate that the Sr₃La(PO₄)₃:Tb³⁺, Eu³⁺ phosphors might find potential applications in the field of lighting and displays.     

Tunable single-phase white-light-emitting Ba2Mg(BO3)2:Ce3+, Na+, Tb3+, Eu2+ phosphor based on energy transfer

A series of white-light-emitting phosphors of single-phase Ba₂Mg(BO₃)₂:Ce³⁺, Na⁺, Tb³⁺, Eu²⁺ were synthesized by conventional solid-state reaction. The crystal structure of the host was characterized by X-ray diffraction and investigated by Rietveld refinement. Photoluminescence properties were studied in detail. The energy transfer from Ce³⁺ to Tb³⁺ in Ba₂Mg(BO₃)₂ host was investigated and demonstrated to be a resonant type via a quadrupole–quadrupole mechanism. White light with wavelength tunable was realized by coupling the emission bands peaking at 417, 543 and 626 nm attributed to Ce³⁺, Tb³⁺ and Eu²⁺, respectively. By properly tuning the relative composition of Ce³⁺(Na⁺)/Tb³⁺/Eu²⁺, optimized Commission Internationale de l׳Eclairage (CIE) chromaticity coordinates (0.363, 0.295), high color rendering index (CRI) 90 and low correlated color temperature (CCT) 3793 K were obtained from the phosphor of Ba_1.90Ce_0.04Na_0.04Eu_0.02Mg_0.94Tb_0.06(BO₃)₂ upon the excitation of 296 nm UV radiation. These results indicate that Ba₂Mg(BO₃)₂:Ce³⁺, Na⁺, Tb³⁺, Eu²⁺ phosphor has a potential application as an UV radiation down-converting phosphor in white-light-emitting diodes.     

Energy transfer,tunable emission and optical thermometry in Tb3+/Eu3+ co-doped transparent NaCaPO4 glass ceramics

Tb³⁺/Eu³⁺ co-doped glass ceramics containing NaCaPO₄ nanocrystals were successfully synthesized via traditional melt-quenching route with further heat-treatment and characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM) and photoluminescence spectroscopy. The energy transfer process of Tb³⁺→Eu³⁺ was confirmed by excitation and emission spectra and luminescence decay curves, and the energy transfer efficiency was also estimated. The results indicated that the efficient emission of Eu³⁺ was sensitized by Tb³⁺ under the excitation of 378 nm, realizing tunable emission in the transparent bulk glass ceramics containing NaCaPO₄ nanocrystals. Furthermore, optical thermometry was achieved by the fluorescence intensity ratio between Tb³⁺:⁵D₄→⁷F₅ (~542 nm) and Eu³⁺:⁵D₀→⁷F₂ (~612 nm). The maximum absolute sensitivity of 4.55% K⁻¹ at 293 K and the maximal relative sensitivity of 0.66% K⁻¹ at T=573 K for Tb³⁺/Eu³⁺ co-doped transparent NaCaPO₄ glass ceramic are obtained. It is expected that the investigated transparent NaCaPO₄ glass ceramics doped with Tb³⁺/Eu³⁺ have prospective applications in display technology and optical thermometry.     

Tunable color emission in LaScO3:Bi3+,Tb3+,Eu3+ phosphor

LaScO₃:xBi³⁺,yTb³⁺,zEu³⁺ (x = 0 − 0.04, y = 0 − 0.05, z = 0 − 0.05) phosphors were prepared via high-temperature solid-state reaction. Phase identification and crystal structures of the LaScO₃:xBi³⁺,yTb³⁺,zEu³⁺ phosphors were investigated by X-ray diffraction (XRD). Crystal structure of phosphors was analyzed by Rietveld refinement and transmission electron microscopy (TEM). The luminescent performance of these trichromatic phosphors is investigated by diffuse reflection spectra and photoluminescence. The phenomenon of energy transfer from Bi³⁺ and Tb³⁺ to Eu³⁺ in LaScO₃:xBi³⁺,yTb³⁺,zEu³⁺ phosphors was investigated. By changing the ratio of x, y, and z, trichromatic can be obtained in the LaScO₃ host, including red, green, and blue emission with peak centered at 613, 544, and 428 nm, respectively. Therefore, two kinds of white light-emitting phosphors were obtained, LaScO₃:0.02Bi³⁺,0.05Tb³⁺,zEu³⁺ and LaScO₃:0.02Bi³⁺,0.03Eu³⁺,yTb³⁺. The energy transfer was characterized by decay times of the LaScO₃:xBi³⁺, yTb³⁺, zEu³⁺ phosphors. Moreover absolute internal QY and CIE chromatic coordinates are shown. The potential optical thermometry application of LaScO₃:Bi³⁺,Eu³⁺ was based on the temperature sensitivity of the fluorescence intensity ratio (FIR). The maximum S_a and S_r are 0.118 K⁻¹ (at 473.15 K) and 0.795% K⁻¹ (at 448.15 K), respectively. Hence, the LaScO₃:Bi³⁺,Eu³⁺ phosphor is a good material for optical temperature sensing.     

Synthesis and photoluminescence properties of the high-brightness Eu3+-doped Sr3Y(PO4)3 red phosphors

A series of red-emitting phosphors Eu³⁺-doped Sr₃Y(PO₄)₃ have been successfully synthesized by conventional solid-state reaction, and its photoluminescence properties have been investigated. The excitation spectra reveal strong excitation bands at 392 nm, which match well with the popular emissions from near-UV light-emitting diode chips. The emission spectra of Sr₃Y(PO₄)₃:Eu³⁺ phosphors exhibit peaks associated with the ⁵D₀ → ⁷F_J (J = 0, 1, 2, 3, 4) transitions of Eu³⁺ and have dominating emission peak at 612 nm under 392 nm excitation. The integral intensity of the emission spectra of Sr₃Y_0.94(PO₄)₃:0.06Eu³⁺ phosphors excited at 392 nm is about 3.4 times higher than that of Y₂O₃:Eu³⁺ commercial red phosphor. The Commission Internationale de l’Eclairage chromaticity coordinates, the quantum efficiencies and decay times of the phosphors excited under 392 nm are also investigated. The experimental results indicate that the Eu³⁺-doped Sr₃Y(PO₄)₃ phosphors are promising red-emitting phosphors pumped by near-UV light.     

Sr3GdLi(PO4)3F:Eu2+, Mn2+: A tunable blue-white color emitting phosphor via energy transfer for near-UV white LEDs

A series of Eu²⁺ and Mn²⁺ co-doping Sr₃GdLi(PO₄)₃F phosphors have been synthesized through high temperature solid state reaction. Eu²⁺ single doped Sr₃GdLi(PO₄)₃F phosphors have an efficient excitation in the range of 230–430 nm, which is in good agreement with the commercial near-ultraviolet (n-UV) LED chips, and gives intense blue emission centering at 445 nm. The critical distance of the Eu²⁺ ions in Sr₃GdLi(PO₄)₃F is computed and demonstrated that the concentration quenching mechanism of Eu²⁺ is mostly caused by the dipole-dipole interaction. By co-doping Eu²⁺ and Mn²⁺ ions in the Sr₃GdLi(PO₄)₃F host, the energy transfer from Eu²⁺ to Mn²⁺ that can be discovered. With the increase of Mn²⁺ content, emission color can be adjusted from blue to white under excitation of 380 nm, corresponding to chromatic coordinates change from (0.189, 0.108) to (0.319, 0.277). The energy transfer from Eu²⁺ to Mn²⁺ ions is proven to be a dipole-dipole mechanism on the basis of the experimental results and analysis of photoluminescence spectra and decay curves. This study infers that the obtained Sr₃GdLi(PO₄)₃F:Eu²⁺, Mn²⁺ phosphors may be a potential candidate for n-UV LEDs.     

Efficient sensitization of Tb3+ emission by Dy3+ in CaMoO4 phosphors: Energy transfer,tunable emission and optical thermometry

Dy³⁺/Tb³⁺ codoped CaMoO₄ phosphors were synthesized by a simple sol–gel method and characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM) and photoluminescence spectroscopy. The energy transfer process of Dy³⁺→Tb³⁺ was confirmed by excitation and emission spectra and luminescence decay curves, and the energy transfer efficiency was also estimated. The results verified that the efficient emission of Tb³⁺ was sensitized by Dy³⁺ under the excitation of 354 nm, realizing tunable emission in CaMoO₄ phosphors. Furthermore, optical thermometry was achieved by the fluorescence intensity ratio between Tb³⁺: ⁵D₄→⁷F₅ (~546 nm) and Dy³⁺: ⁴F_9/2→⁶H_13/2 (~575 nm). It is expected that the investigated CaMoO₄ nanograins doped with Dy³⁺/Tb³⁺ have prospective applications in display technology and optical thermometry.     

Photoluminescent properties and site occupation preference in Bi3+, Eu3+ doped CaY4(SiO4)3O phosphor

Bi³⁺, Eu³⁺ doped CaY₄(SiO₄)₃O phosphors were synthesized through high temperature solid state reaction. Their photoluminescent properties were investigated and site occupation preference of Bi³⁺ in cationic sites was analyzed. The structure of CaY₄(SiO₄)₃O is characterized by three non-equivalent cationic sites with different coordination and cation-oxygen distances. By means of dielectric theory of the chemical bond for complex crystals, several kinds of chemical bond parameters like fractional covalence of CaY₄(SiO₄)₃O were calculated and integrated to yield environmental factor h_e. According to quantitative equations between the transition energy of Bi³⁺ and environmental factor h_e, the excitation bands at 308 and 226 nm were assigned to ¹S₀→³P₁ transition of Bi³⁺ in Y(6h) and Y(4f) site, respectively. Another excitation band centered at 210 nm should be the overlap of Bi³⁺ A-band in Ca site and C-band in Y(6h) site. Optical band gap of pure CYSO was calculated using Kubelka–Munk method from diffuse reflectance spectra. Red emission can be realized in CaY₄(SiO₄)₃O:Bi³⁺, Eu³⁺ under UV light excitation because of efficient energy transfer from Bi³⁺ to Eu³⁺ and decay behaviors of Bi³⁺ and Eu³⁺ emission were investigated. Without optimization, the internal quantum efficiency of CYSO:2%Bi³⁺, 7%Eu³⁺ at 310 and 393 nm excitations were 31.563%, 74.252%, respectively.     

Red-emitting enhancement of Bi4Si3O12:Sm3+ phosphor by Pr3+ co-doping for White LEDs application

In this account, Bi₄Si₃O₁₂:Sm³⁺ and (Bi₄Si₃O₁₂:Sm³⁺, Pr³⁺) red phosphors were prepared by solution combustion method fueled by citric acid at 900 °C for 1 h. The effects of co-doping Pr³⁺ ions on red emission properties of Bi₄Si₃O₁₂:Sm³⁺ phosphors, as well as the mechanism of interaction between Sm³⁺ and Pr³⁺ ions were investigated by various methods. X-ray diffraction (XRD) and Scanning electron microscopy (SEM) revealed that smaller amounts of doped rare earth ions did not change the crystal structure and particle morphology of the phosphors. The photoluminescence spectroscopy (PL) indicated that shape and position of the emission peaks of (Bi₄Si₃O₁₂:Sm³⁺, Pr³⁺) phosphors excited at λ_ex=403 nm were similar to those of Bi₄Si₃O₁₂:Sm³⁺ phosphors. The strongest emission peak was recorded at 607 nm, which was attributed to the ⁴G_5/2→⁶H_7/2 transition of the Sm³⁺ ion. The photoluminescence intensities of Bi₄Si₃O₁₂:Sm³⁺ phosphors were significantly improved by co-doping with Pr³⁺ ions and were maximized at Sm³⁺ and Pr³⁺ ions doping concentrations of 4 mol% and 0.1 mol%, respectively. The characteristic peaks of Sm³⁺ ions were displayed in the emission spectra of (Bi₄Si₃O₁₂:Sm³⁺, Pr³⁺) phosphors excited at respectively λ_ex=443 nm and λ_ex=481 nm (Pr:³H₄→³P₂, ³H₄→³P₀). This indicated the existence of Pr³⁺→Sm³⁺ energy transfer in (Bi₄Si₃O₁₂:Sm³⁺, Pr³⁺) phosphors.     

Broad band down conversion from ultra violet light to near infrared emission in YVO4:Bi3+, Yb3+ as spectral conversion phosphor for c-Si solar cells

Vanadate based down conversion phosphors have been synthesized by a novel co-precipitation technique. The effect of pH on crystal structure, particle size, morphology and luminescence properties were investigated by XRD, SEM-EDAX, FT-IR and PL measurements. As different from other reports (blue, green emission) the produced phosphors have shown greenish–yellow emission, owing to their fine particle size. A broad band excitation (280–370 nm), ascribed to ¹S₀→³P₁ and an intense greenish–yellow band emission (410–700 nm) attributed to ³P₁→¹S₀ transition of Bi³⁺ were observed. A strong greenish–yellow emission was measured with 3 mol. % of Bi³⁺ ions, as an optimum dopant concentration. The characteristic NIR emission of Yb³⁺, owing to ²F_5/2→²F_7/2 was recorded at 1039 nm, as a result of efficient energy transfer from Bi³⁺ to Yb³⁺, ions. The phosphors with chemical composition as Y_0.96VO₄: Bi_0.03³⁺, Yb_0.01³⁺ and Y_0.87VO₄: Bi_0.03³⁺,Yb_0.1³⁺ are suggested to be the novel candidates for the efficient down conversion of broad band ultra violet (UV) light into visible/near infrared (NIR) emission, as DC layers on c-Si solar cells for better harvesting the solar spectrum via spectral matching phenomena.     

Synthesis and photoluminescence enhancement of Ca3Sr3(VO4)4:Eu3+ red phosphors by co-doping with La3+

In this study, a series of red-emitting Ca₃Sr₃(VO₄)₄:Eu³⁺ phosphors co-doped with La³⁺ was prepared using the combustion method. The microstructures, morphologies, and photoluminescence properties of the phosphors were investigated. All Ca₃Sr₃(VO₄)₄:Eu³⁺, La³⁺ samples synthesized at temperatures greater than 700 ℃ exhibited the same standard rhombohedral structure of Ca₃Sr₃(VO₄)₄. Furthermore, the Ca₃Sr₃(VO₄)₄:Eu³⁺, La³⁺ phosphor was effectively excited by near-ultraviolet light of 393 nm and blue light of 464 nm. The strong excitation peak at 464 nm corresponded to the ⁷F₀→⁵D₂ electron transition of Eu³⁺. The strong emission peak observed at 619 nm corresponded to the ⁵D₀→⁷F₂ electron transition of Eu³⁺. Co-doping with La³⁺ significantly improved the emission intensity of Ca₃Sr₃(VO₄)₄:Eu³⁺ red phosphors. The optimum luminescence of the phosphor was observed at Eu³⁺ and La³⁺ concentrations of 5% and 6%, respectively. Moreover, co-doping with La³⁺ also improved the fluorescence lifetime and thermal stability of the Ca₃Sr₃(VO₄)₄:Eu³⁺ phosphor. The CIE chromaticity coordinate of Ca₃Sr₃(VO₄)₄:0.05Eu³⁺, 0.06La³⁺ was closer to the NTSC standard for red phosphors than those of other commercial phosphors; moreover, it had greater color purity than that of all the samples tested. The red emission intensity of Ca₃Sr₃(VO₄)₄:0.05Eu³⁺, 0.06La³⁺ at 619 nm was ~1.53 times that of Ca₃Sr₃(VO₄)₄:0.05Eu³⁺ and 2.63 times that of SrS:Eu²⁺. The introduction of charge compensators could further increase the emission intensity of Ca₃Sr₃(VO₄)₄:Eu³⁺, La³⁺ red phosphors. The phosphors synthesized herein are promising red-emitting phosphors for applications in white light-emitting diodes under irradiation by blue chips.     

Improved photoluminescence,thermal stability and temperature sensing performances of K+ incorporated perovskite BaTiO3:Eu3+ red emitting phosphors

K⁺ ions incorporated perovskite Ba_(1−x)TiO₃:x Eu³⁺ red emitting phosphors synthesized via facile solid -state reaction method has been investigated in the current study. The photoluminescence and decay time behavior of Ba_(1−x−y)TiO₃:x Eu³⁺,yK⁺ phosphors are investigated as a function of Eu³⁺, K⁺ concentration and temperature. An intense and sharp emission peak at 615 nm was exhibited by the phosphors upon excitation at 397 nm (⁷F₀→⁵L₆). It can be credited to the hypersensitive electric dipole transition ⁵D₀→⁷F₂, which confirms that Eu³⁺ ions are located at non-centrosymmetric site of the host. The incorporation of K⁺ ions in optimized Ba_0.95TiO₃:0.05 Eu³⁺ phosphor resulted in a remarkable enhancement of photoluminescence intensity by 2.33 times as compared to bare one. The Ba_0.89TiO₃:0.05 Eu³⁺, 0.06 K⁺ phosphors were found to observe good temperature sensing along with adequate thermal stability even at 427 K. Furthermore, the photometric parameters have been also studied which are strongly facilitate the prepared ceramic samples as suitable for potential application in lighting.     

Synthesis and photoluminescence properties of Sr3(PO4)2:Re3+, Li+ (Re = Eu,Sm) red phosphors for white light-emitting diodes

Sr₃(PO₄)₂:Re³⁺, Li⁺ (Re = Eu, Sm) red phosphors were prepared via a high temperature solid state reaction, and their structure and luminescence properties were investigated. X-ray diffraction patterns indicate that the phase of as-prepared samples is in good agreement with standard Sr₃(PO₄)₂ structure. Under 395 nm excitation, the emission of Sr₃(PO₄)₂:Eu³⁺ consists of a strong peak centered at 622 nm and two weak peaks centered at 598 nm and 660 nm, which correspond to ⁵D₀→⁷F₂, ⁵D₀→⁷F₁ and ⁵D₀→⁷F₃ transitions, respectively. Also, the emission spectrum of Sr₃(PO₄)₂:Sm³⁺ shows three main peaks at 568 nm, 603 nm and 651 nm, which are attributed to ⁴G_5/2→⁶H_I/2 (I = 5, 7, 9) transitions of Sm³⁺. Furthermore, luminescence properties of Sr₃(PO₄)₂:Re³⁺, Li⁺ (Re = Eu, Sm) samples are enhanced significantly by Li⁺ ions doping as charge compensator. Results indicate that as-prepared Sr₃(PO₄)₂:Re³⁺, Li⁺ (Re = Eu, Sm) could be the potential red phosphors used in white light-emitting diodes.     

Luminescence properties and energy transfer of GdAl3(BO3)4:Ce3+, Tb3+ phosphor

Ce³⁺ and Tb³⁺ singly doped and co-doped GdAl₃(BO₃)₄ phosphors were synthesized by solid state reaction. The crystal structure, the luminescent properties, the lifetimes and the temperature-dependent luminescence characteristic of the phosphors were investigated. Through an effective energy transfer, the emission spectra of GdAl₃(BO₃)₄:Ce³⁺, Tb³⁺ phosphor contains both a broad band in the range of 330–400 nm originated from Ce³⁺ ions and a series of sharp peaks at 484, 541, 583, and 623 nm due to Tb³⁺ ions. The energy transfer from Ce³⁺ to Tb³⁺ in GdAl₃(BO₃)₄ host is demonstrated to be phonon assisted nonradiative energy transfer via a dipole–dipole interaction.     

Influence of Ce3+ and Gd3+ co-doping on the structure and upconversion emission in hexagonal Ho3+ doped NaYbF4 phosphors

Hexagonal Ho³⁺ doped NaYbF₄ phosphors are synthesized via a hydrothermal method. The influence of Gd³⁺ and Ce³⁺ content on the phase structure and upconversion (UC) emission of NaYbF₄ phosphors is investigated by X-ray diffraction (XRD), transmission electron microscopy (TEM) and UC spectra. The results of XRD and TEM indicate that the solubility of Ce³⁺ in hexagonal NaYbF₄ is low due to the large difference of ionic radius between Ce³⁺ and Yb³⁺. With help of Gd³⁺ co-doping (15 mol%), pure hexagonal NaYbF₄ phosphors with high doping concentration of Ce³⁺ (15 mol%) and small crystal size are obtained. When excited by a 980 nm laser diode, Ho³⁺ doped hexagonal NaYb_0.85Gd_0.15F₄ phosphors exhibit strong green UC emission at 540 nm and weak red one at 646 nm. UC luminescence tuning from green emission to red emission is observed in hexagonal Ho³⁺ doped NaYb_0.85Gd_0.15F₄ phosphors by co-doping with Ce³⁺ ions. The UC luminescence tuning phenomenon is attributed to two resonant energy transfer processes of ⁵S₂/⁵F₄(Ho³⁺)+²F_5/2(Ce³⁺)→⁵F₅(Ho³⁺)+⁵F_7/2(Ce³⁺) and ⁵I₆(Ho³⁺)+²F_5/2(Ce³⁺)→⁵I₇(Ho³⁺⁾+⁵F_7/2(Ce³⁺) between Ho³⁺ and Ce³⁺, which suppress the green emission at 540 nm, while promote the red one at 646 nm.     

Size controllable synthesis and multicolor fluorescence of SiO2:Ln3+(Ln=Eu,Tb) spherical nanoparticles

A series of size controllable Tb³⁺ and/or Eu³⁺ activated nano-sized silica phosphors have been successfully synthesized through a facile sol-gel method. The structure, morphology, compositions, and luminescence properties of as-prepared samples were well investigated using X-ray diffraction (XRD), scanning electron microscope (SEM), energy dispersive spectrometer (EDS), X-ray photoelectron spectroscopy (XPS), Brunauer-Emmett-Teller (BET) and photoluminescence spectroscopy (PL). The results showed that all as-prepared samples were spherical nanoparticles but the sizes reduced gradually with the temperature increased from 25 °C to 65 °C, which was contrary to the BET surfaces as well as the luminescence intensity. Under ultraviolet excitation, the SiO₂:Ln³⁺(Ln=Eu, Tb) spherical nanoparticles showed characteristic red and green emissions corresponding to f-f transition of Eu³⁺ and Tb³⁺, respectively. Moreover, the luminescence emissions of samples can be tuned from green to yellow, orange and red by co-doping the Tb³⁺ and Eu³⁺ ions in different concentration ratio into the SiO₂ host due to the efficient dipole–dipole energy transfer mechanism from Tb³⁺ to Eu³⁺ under 377 nm excitation. These results show that as-prepared phosphors may find potential applications in color display fields.     

Warm white-light generation in Ca9MgNa(PO4)7:Sr2+, Mn2+, Ln (Ln=Eu2+, Yb3+, Er3+, Ho3+, and Tm3+) under near-ultraviolet and near-infrared excitation

To obtain warm white-light emission, a series of Ca₉MgNa(PO₄)₇:Sr²⁺, Mn²⁺, Ln (Ln=Eu²⁺, Yb³⁺, Er³⁺, Ho³⁺, and Tm³⁺) phosphors were designed and their photoluminescence properties under near-ultraviolet and near-infrared excitation were studied. For near-ultraviolet excitation, blue-white emission is produced initially in the Eu²⁺ single-doped Ca₉MgNa(PO₄)₇, whose excitation band can well match with the near ultraviolet LED chip. By introducing Sr²⁺ ions into Ca₉MgNa(PO₄)₇:Eu²⁺, the Eu²⁺ emission band beyond 500 nm is enhanced obviously. Correspondingly, the emitting light color is tuned to nearly white. To generate warm white light further, Mn²⁺ is doped into the Ca_8.055MgNa(PO₄)₇:0.045Eu²⁺, 0.9Sr²⁺ and the correlated color temperature is decreased largely. For near-infrared excitation, the green, red, and blue emissions have been obtained in the Yb³⁺-Er³⁺, Yb³⁺-Er³⁺, and Yb³⁺-Er³⁺ co-doped Ca₉MgNa(PO₄)₇ phosphors, respectively. And warm white light is also produced in the Ca₉MgNa(PO₄)₇:Yb³⁺, Er³⁺, Ho³⁺, Tm³⁺ under 980 nm excitation.     

Luminescence properties and energy transfer investigations of Sr2B2O5:Ce3+,Tb3+ phosphors

Ce³⁺ and Tb³⁺ co-doped Sr₂B₂O₅ phosphors were synthesized by the solid-state method. X-ray diffraction (XRD) was used to characterize the phase structure. The luminescent properties of Ce³⁺ and Tb³⁺ co-doped Sr₂B₂O₅ phosphors were investigated by using the photoluminescence emission, excitation spectra and reflectance spectra, respectively. The excitation spectra indicate that this phosphor can be effectively excited by near ultraviolet (n-UV) light of 317 nm. Under the excitation of 317 nm, Sr₂B₂O₅:Ce³⁺,Tb³⁺ phosphors exhibited blue emission corresponding to the f–d transition of Ce³⁺ ions and green emission bands corresponding to the f–f transition of Tb³⁺ ions, respectively. The Reflectance spectra of the Sr₂B₂O₅:Ce³⁺,Tb³⁺ phosphors are noted that combine with Ce³⁺ and Tb³⁺ ion absorptions. Effective energy transfer occurred from Ce³⁺ to Tb³⁺ in Sr₂B₂O₅ host due to the observed spectra overlap between the emission spectrum of Ce³⁺ ion and the excitation spectrum of Tb³⁺ ion. The energy transfer efficiency from Ce³⁺ ion to Tb³⁺ ion was also calculated to be 90%. The phosphor Sr₂B₂O₅:Ce³⁺,Tb³⁺ could be considered as one of double emission phosphor for n-UV excited white light emitting diodes.