具有不可控变迁离散事件系统的Petri网控制器

考虑可用具有不可控变迁的受控Petri网建模的离散事件动态系统.提出了在这类 系统中实现一组不等式约束的控制器的综合方法.所提出的控制器可通过给系统Petri网模 型增加一些Petri网元素来实现,其计算是建立在本文提出的Petrl网的路增益概念基础上 的.方法是系统、简单、计算量小.     

可编程逻辑控制器的平行Petri网设计与实现方法

为了实现可编程逻辑控制器(PLC)的形式化设计, 定义了一种可以感知和执行的新型Petri网, 称为平行Petri 网. 将输入输出变量映射到库所结点上, 描述了PLC的Petri网模型的一般设计方法, 进而给出了其动态演化算法. 通 过C语言和TwinCAT联合编程, 使得Petri网与被控物理对象平行演化, 实现了Petri网对物理过程的平行感知和控制, 并完成了实验验证. 该方法可以缩短控制代码的开发周期, 简化程序复用的复杂性, 为平行系统在PLC工程中的应 用提供了有效工具.     

基于模糊神经Petri网的故障诊断模型

Petri网是对具有产生式规则的故障诊断系统的有力建模工具，但其缺乏较强的学习能力．本文以Petri网的基本定义为基础，结合模糊逻辑和Petri网模型，定义了模糊Petri网模型，在此基础上引入人工神经网络技术，给出了人工神经网络的模糊Petri网表示方法，并针对工程机械故障诊断异步、离散等特点，提出并建立了故障诊断的模糊神经Petri网模型及其改进模型．基于模糊神经Petri网的故障诊断系统结合了Petri网和人工神经网络的优点，经过自学习后同时具有很强的推理能力和自适应能力．     

Petri网的硬件实现

Petri网是异步并发现象建模的重要工具,Petri网的硬件实现将为并行控制器的设计提供有效的途径.给出了几种Petri网系统的硬件实现方法,包括带抑制弧和允许弧的C/E系统、P/T系统、T-时延Petri网系统;给出了硬件实现中非纯网的处理方法.首先讨论实现各种Petri网的逻辑电路;然后用ABEL语言对逻辑电路进行描述;最后给出了一个用解释Petri网描述的服务系统的例子,说明如何使用硬件(CPLD)实现的方法.实验结果表明了上述方法的正确性.这对于离散事件动态系统控制器的设计,尤其是片上并行控制器、多处理器芯片的设计都具有十分重要的意义.     

串行加工系统Petri网控制器的形式化设计方法

提出了串行加工系统控制描述规格说明的设计方法,研究了规格说明的Petri网语 义.提出了系统Petri网控制器具有活性等希望性质的初始标识的确定算法.这样的Petri网 控制器经编译或算法转换可直接对系统进行实时控制.     

基于有限容量库所的离散事件系统的Petri网控制器综合——第1部分

针对由Petri网建模的离散事件系统, 提出了一种新的控制器设计方法. 控制器是基于有限容量库所的概念构造而成的, 并使被控对象在给定的一组线性不等式约束下运行, 而给定的线性不等式约束是定义在库所标识上的. 控制器的综合利用了有限容量库所Petri网转换为 (普通 )无限容量库所Petri网的技术. 针对约束的不同情况, 给出了相应的Petri网的控制器的设计方法.     

逻辑控制器设计与离散事件系统监控理论

物联网等通信技术将越来越多的控制元件集成起来,导致系统规模快速增长,逻辑控制规范也日益复杂,任何逻辑错误都可能造成重大事故和人身灾难,再加上"维数灾"问题,安全可靠的逻辑控制程序的设计和调试面临巨大的计算复杂性难题.而离散事件系统监控理论旨在研究复杂控制规范的设计和实现问题,将连锁、互斥、字符串语言等复杂控制逻辑描述为自动机或Petri网,然后转换为可编程逻辑控制器或现场可编程门阵列上执行的程序代码.本文综述了现有的逻辑控制器的形式化设计方法,主要涉及如何利用监控理论(自动机或Petri网)来缩短程序开发周期、提高程序可重用性和确保程序可靠性和安全性等问题.     

一类FMS的最佳活Petri网模型的综合

利用Petri网为一类柔性制造系统建模,并讨论避免系统死锁问题.通过Petri网模 型的结构分析,证明了系统产生死锁的一个充分必要条件.给出了避免死锁的最佳控制器,它 可以通过给系统的Petri网模型增加一些新的位置与相应的弧来实现.从而导出了这类制造 系统的最佳活Petri网模型.     

一个嵌入式系统的Petri网模型与CPLD实现

将Petri网与VHDL结合,运用Petri网建立硬件系统模型,然后采用VHDL语言进行设计,最终下载到CPLD,成功地实现了整个硬件系统的逻辑控制器设计。     

基于组合逻辑的故障诊断方法

针对复杂系统故障传播和故障分析的模糊性和不确定性,首先,在逻辑Petri网和模糊Petri网的理论基础上,根据逻辑Petri网的传值不确定性以及模糊Petri网对模糊信息的表示和推理能力的特点,提出模糊逻辑Petri网的概念及推理规则,考虑不同故障源对故障的影响程度,将概率信息引入模糊逻辑Petri网,对故障源赋予置信度,使故障诊断过程更符合实际。其次,利用模糊逻辑Petri网对故障诊断系统进行建模,用模糊逻辑Petri网描述了系统故障状态组合的逻辑关系,并进一步简化了系统模型的表达形式,具有良好的封装性、重构性和可维护性,在一定程度上缓解了状态组合空间爆炸问题。针对故障的传播性,采用可达性分析方法对故障信息的传播路径进行模拟论证,提高了故障诊断效率。最后,通过离心式压缩机故障诊断过程实例分析,验证了该方法的有效性和可行性,提高了故障诊断过程的准确性和高效性。     

The real-time supervisory control of an experimental manufacturing system based on a hybrid method

In this paper, the real-time supervisory control of an experimental manufacturing system is reported based on a recently proposed hybrid (mixed PN/automaton) approach. Assuming that an uncontrolled bounded Petri net (PN) model of a (plant) discrete event system (DES) and a set of forbidden state specifications are given, the proposed approach computes a maximally permissive and nonblocking closed-loop hybrid model. The method is straightforward logically, graphically and technologically. This paper particularly shows the applicability of a hybrid (mixed PN/automaton) approach to low-level real-time DES control. To do this, programmable logic controller (PLC) based real-time control of an experimental manufacturing system is considered.     

Design and Implementation of Discrete Event Control Systems: A Petri Net Based Hardware Approach

This paper presents a methodology for modeling and hardware implementation of discrete event control systems based on the formalism of Petri nets (PN). The control algorithm is initially specified as an executable PN specification which is subsequently compiled directly into a compact machine code and stored in commercially available programmable read only memory (PROM). As an implementation platform, a programmable Petri net based dedicated discrete event controller is proposed. The scalable architecture of the controller is optimized to process PN constructs of all possible classes. A remarkable feature of the proposed architecture is its ability to handle explicit concurrency. The controller exploits hardware-level parallelism to track multiple tokens (control threads) through the net. The performance of the architecture has been verified and benchmarked on the fabricated integrated circuit (IC) prototype of the controller.     

针对一般线性约束的Petri网控制器设计方法

针对基于Petri网离散事件系统关于标识向量和Parikh向量的不等式约束反馈控制器设计问题,提出一种新的控制器设计方法.该方法首先利用Petri网的状态方程把关于标识向量和Parikh向量的不等式约束转变成关于Parikh向量的不等式约束,然后基于Petri网库所是关于Parikh向量的不等式约束的观点构造控制器.最后将该方法与Iordache和Moody提出的方法作比较,实验结果显示该方法更简单、有效.     

Synthesis of a closed-loop combined plant and controller model

In practice, a controlled system consists of two distinct entities: the plant and the controller. These two entities are coupled by a feedback mechanism to give the closed-loop behavior of the controlled system. Under this structure, the controlled behavior of the system can be analyzed by simulation which is costly and time consuming. In this study, we synthesize a combined plant and controller model. We consider the practical issues and propose a method which combines the advantages of Petri nets (PN) and the supervisory controller design based on Formal Language Theory. The resultant combined model is a PN and represents the controlled closed-loop behavior of the system. This model can be used for the functional and the performance analysis of the system, verification of the controller and the control code generation.     

Control reconfiguration of discrete event systems controllers with partial observation

In this paper, we develop a framework for reconfiguration of a discrete event system (DES) controller, which has a dynamic event observation set. We will show the designed reconfiguration yields a more tolerable controller than the one designed in [5]. Starting with a maximally permissive controller that has a full observation of its DES, we design a mega-controller that monitors the observation set of the DES controller and its state continuously. Upon a change in the observation set, the mega-controller reconfigures the controller by a aggregation or disaggregation of the controller states. The mega-controller is also responsible for feedback function adjustments if the available observation set causes a conflict in control. We illustrate the reconfiguration procedures by an example.     

方面单元测试框架的设计与实现

缺乏成熟的方面测试和方面冲突检测技术是阻碍面向方面软件编程大规模应用的瓶颈性问题。针对方面单元测试,提出了无需与基模块编织的方面单元的独立测试框架AJUnit。该框架运用Java注释和源码与字节码映射等技术实现编译细节的透明化。基于控制流和数据流分析,AJUnit综合运用随机测试数据生成、相对测试充分性准则的优化和指定路径的测试数据生成等技术实现测试过程的自动化。文中也介绍了以AJUnit为基础的方面单元测试工具的设计和实现。     

On the supremal controllable sublanguage in the discrete-eventmodel of nondeterministic hybrid control systems

This paper is concerned with the logical control of hybrid control systems (HCS). It is assumed that a discrete-event system (DES) plant model has already been extracted from the continuous-time plant. The problem of hybrid control system design can then be solved by applying logical DES controller synthesis techniques to the extracted DES plant. Traditional DES synthesis methods, however, are not always applicable since the extracted plant DES will often exhibit nondeterministic transitions. This paper presents an extension of certain DES controller synthesis techniques to the nondeterministic control automaton found in HCS. In particular, this paper derives a formula computing the supremal controllable sublanguage of a given specification language under the assumption that the DES plant exhibits nondeterministic transitions     

Automatic Reconfiguration of Petri Net Controllers for Reconfigurable Manufacturing Systems With an Improved Net Rewriting System-Based Approach

The advent of reconfigurable manufacturing systems (RMSs) has given rise to a challenging problem, i.e., how to reconfigure rapidly and validly a RMS supervisory controller in response to frequent changes in the manufacturing system configuration driven by fluctuating market. This paper presents an improved net rewriting system (INRS)-based method for automatic reconfiguration of Petri net (PN) supervisory controllers for RMS. We begin with presenting the INRS which overcomes the limitations of the net rewriting system and can dynamically change the structure of a PN without damaging its important behavioral properties. Based on INRS, a method for design reconfigurable PN controllers of RMS is introduced. Subsequently, we presented an INRS-based method for rapidly automatic reconfiguration of this class of PN controllers. In the reconfiguration method, changes in a RMS configuration can be formalized and act on an existing controller to make it reconfigure rapidly into a new one. Noticeably, no matter the design or reconfiguration, the expected behavioral properties of the resultant PN controllers are guaranteed. Thus, efforts for verification of the results can be avoided naturally. We also illustrate the reconfiguration of a PN controller for a reconfigurable manufacturing cell.     

基于分布式专家系统的超高压输电线路巡检机器人控制系统的研究

探讨了基于分布式专家系统的超高压输电线路巡检机器人控制系统，给出了一种利用CLIPS和C、VC++混合编程构成分布式专家系统作为机器人控制器的方法,并且提出了一种基于规则和证据的可信度(CF)的分布式专家系统的协调算法.经过试验论证,该控制方法能很好地实现超高压输电线路巡检机器人的作业功能.􀁱