Adaptive actuator failure compensation for multivariable feedback linearizable systems

A feedback linearization‐based adaptive control scheme is developed for multivariable nonlinear systems with redundant actuators subject to uncertain failures. Such an adaptive controller contains a direct adaptive actuator failure compensator to compensate the uncertain actuator failure, a nonlinear feedback to linearize the nonlinear dynamics, and a linear feedback to stabilize the linearized system. The key new design feature is the estimation of both the failure patterns and the failure values, for direct adaptive actuator failure compensation, newly developed for multivariable feedback linearizable nonlinear systems. With direct control signal adaptation, the adaptive failure compensation design ensures closed‐loop stability and asymptotic output tracking in the presence of actuator failure uncertainties. Simulation results from an application to attitude control of a near‐space vehicle dynamic model are presented to verify the desired system performance with adaptive actuator failure compensation. Copyright © 2015 John Wiley & Sons, Ltd.     

非线性动态突变系统的多模型自适应执行器故障补偿设计

本文针对因多重不确定执行器故障而引起系统动态突变的非线性系统,设计了一种基于多模型切换的自适应执行器故障补偿控制策略,以提高系统应对动态突变的能力,同时实现不确定执行器故障的快速精确补偿.针对执行器故障模式的不确定性问题,采用基于多模型的参数估计方法,设计了自适应控制器组;基于最优性能指标函数,提出了一种控制切换机制,...     

Adaptive actuator failure compensation control for MIMO systems*

Two adaptive failure compensation control schemes based on MRAC are developed for a class of MIMO LTI systems with unknown actuator failures. An effective controller structure is proposed to achieve the desired plant-model output matching when implemented with matching parameters. Design conditions are specified for such nominal plant-model output matching. Two adaptive versions of the nominal controller are proposed and stable adaptive laws are derived for updating the controller parameters when plant parameters and failure parameters are unknown. All closed-loop signals are bounded and the plant outputs track the given reference outputs asymptotically, despite the uncertainties in actuator failures and plant parameters. Simulation results for an aircraft lateral dynamic model verify the desired adaptive control system performance in the presence of unknown rudder and aileron failures.     

Adaptive robust fault-tolerant control for linear MIMO systems with unmatched uncertainties

In this paper, two novel fault-tolerant control design approaches are proposed for linear MIMO systems with actuator additive faults, multiplicative faults and unmatched uncertainties. For time-varying multiplicative and additive faults, new adaptive laws and additive compensation functions are proposed. A set of conditions is developed such that the unmatched uncertainties are compensated by actuators in control. On the other hand, for unmatched uncertainties with their projection in unmatched space being not zero, based on a (vector) relative degree condition, additive functions are designed to compensate for the uncertainties from output channels in the presence of actuator faults. The developed fault-tolerant control schemes are applied to two aircraft systems to demonstrate the efficiency of the proposed approaches.     

Adaptive actuator failure compensation for parametric strict feedback systems and an aircraft application

Adaptive actuator failure compensation for parametric-strict-feedback systems is studied under different system structure conditions. Adaptive state feedback control schemes are developed, which ensure asymptotic output tracking and closed-loop signal boundedness. An adaptive control scheme is applied to a twin otter aircraft longitudinal nonlinear dynamics model in the presence of unknown failures in a two-segment elevator servomechanism. Simulation results verify the effectiveness of adaptive actuator failure compensation for desired system performance.     

飞翼飞行器的操纵面故障自适应补偿控制

本文针对具有操纵面卡死、失效故障以及执行器饱和的飞翼飞行器纵向运动,考虑系统的预定动态性能,提出了一种自适应反步补偿跟踪控制方案.设计预定动态性能(prescribed performance bound,PPB)边界以保证系统的跟踪误差,采用二阶指令滤波器限制执行器的饱和,通过控制分配避免执行器故障后对横侧向运动的影响.所设计的自适应反步补偿跟踪控制律能够保证系统对参考信号的渐近跟踪.仿真结果表明了本文方法的有效性.     

A discrete-time parameter estimation based adaptive actuator failure compensation control scheme

This article studies discrete-time adaptive failure compensation control of systems with uncertain actuator failures, using an indirect adaptive control method. A discrete-time model of a continuous-time linear system with actuator failures is derived and its key features are clarified. A new discrete-time adaptive actuator failure compensation control scheme is developed, which consists of a total parametrisation of the system with parameter and failure uncertainties, a stable adaptive parameter estimation algorithm, and an on-line design procedure for feedback control. This work provides a new design of direct adaptive compensation of uncertain actuator failures, using an indirect adaptive control method. Such an adaptive design ensures desired closed-loop system stability and tracking properties despite uncertain actuator failures. Simulation results are presented to show the desired adaptive actuator failure compensation performance.     

Adaptive Active Fault Tolerant Control for Discrete‐Time Systems with Uncertainties

An active fault‐tolerant control scheme for discrete‐time systems is proposed to solve a difficult problem of fault‐tolerant controller design in the presence of partial loss of actuator effectiveness faults and structural parameter uncertainties assumed to be matched, using adaptive control techniques to help a faster and more accurate compensation of failure and uncertainty. An automated fault estimation scheme is developed together with an adaptive model parameter identification to obtain system parameter estimates. With these estimates fed back to the system, a model reference adaptive controller is constructed to achieve a desired tracking performance. Since parameters are obtained and updated online, the control system has an automatic failure compensation capability so as to recognize or reconfigure the control law in real time in response to failure indications. The stability and convergence follow from discrete‐time Lyapunov arguments. Simulation results from the linearized lateral dynamics model of the Boeing 747 airplane are presented to show the efficiency of proposed methods.     

An adaptive actuator failure compensation controller using outputfeedback

An adaptive control scheme using output feedback for output tracking is developed for systems with unknown actuator failures. Such actuator failures are characterized by some unknown inputs stuck at some unknown fixed values at unknown time instants. An effective output feedback controller structure is proposed for actuator failure compensation. When implemented with true matching parameters, the controller achieves desired plant-model output matching. When implemented with adaptive parameter estimates, the controller achieves asymptotic output tracking. A stable adaptive law is derived for parameter adaptation in the presence of parameter uncertainties. Closed-loop signal boundedness and asymptotic output tracking, despite the uncertainties in actuator failures and plant parameters, are ensured analytically and verified by simulation results     

An adaptive integral sliding mode FTC scheme for dissimilar redundant actuation system of civil aircraft

ABSTRACT

This paper proposed a new adaptive integral sliding mode FTC scheme to deal with the actuator faults and failure. The scheme combines integral sliding mode control, control allocation scheme and adaptive strategy. The unknown actuator faults are handled by adaptive modulation gain of nonlinear ISMC law. To cope with complete failure, control allocation scheme is integrated with the baseline controller to provide tolerance. The proposed strategy relies on the estimate of actuator effectiveness. Therefore, an adaptive sliding mode observer based fault reconstruction scheme is proposed in this paper. The proposed scheme is implemented on dissimilar redundant actuation system driven by hydraulic and electro-hydraulic actuators. In nominal and faulty conditions, both actuators are contributing to achieving the desired control surface deflection. However, when the actuator failure occurs, the control signals are reallocated to the redundant actuator. The problem of dynamics mismatch is addressed using fractional order controller designed in an inner loop. The comparison with the existing literature is also conducted in the simulation to validate the dominant performance.     

Robust adaptive fault‐tolerant control of uncertain linear systems via sliding‐mode output feedback

This paper is concerned with the robust adaptive fault‐tolerant compensation control problem via sliding‐mode output feedback for uncertain linear systems with actuator faults and exogenous disturbances. Mismatched disturbance attenuation is performed via H_∞ norm minimization. By incorporating the matrix full‐rank factorization technique with sliding surface design successfully, the total failure of certain actuators can be coped with, under the assumption that redundancy is available in the system. Without the need for a fault detection and isolation mechanism, an adaptive sliding mode controller, where the gain of the nonlinear unit vector term is updated automatically to compensate the effects of actuator faults, is designed to guarantee the asymptotic stability and adaptive H_∞ performance of closed‐loop systems. The effectiveness of the proposed design method is illustrated via a B747‐100/200 aircraft model. Copyright © 2014 John Wiley & Sons, Ltd.     

Robust fault-tolerant controller design for linear time-invariant systems with actuator failures: an indirect adaptive method

In this paper, indirect adaptive state feedback control schemes are developed to solve the robust faulttolerant control (FTC) design problem of actuator fault and perturbation compensations for linear time-invariant systems. A more general and practical model of actuator faults is presented. While both eventual faults on actuators and perturbations are unknown, the adaptive schemes are addressed to estimate the lower and upper bounds of actuator-stuck faults and perturbations online, as well as to estimate control effectiveness on actuators. Thus, on the basis of the information from adaptive schemes, an adaptive robust state feed-back controller is designed to compensate the effects of faults and perturbations automatically. According to Lyapunov stability theory, it is shown that the robust adaptive closed-loop systems can be ensured to be asymptotically stable under the influence of actuator faults and bounded perturbations. An example is provided to further illustrate the fault compensation effectiveness.     

Robust fault-tolerant controller design for linear time-invariant systems with actuator failures: an indirect adaptive method

In this paper, indirect adaptive state feedback control schemes are developed to solve the robust faulttolerant control (FTC) design problem of actuator fault and perturbation compensations for linear time-invariant systems. A more general and practical model of actuator faults is presented. While both eventual faults on actuators and perturbations are unknown, the adaptive schemes are addressed to estimate the lower and upper bounds of actuator-stuck faults and perturbations online, as well as to estimate control effectiveness on actuators. Thus, on the basis of the information from adaptive schemes, an adaptive robust state feed-back controller is designed to compensate the effects of faults and perturbations automatically. According to Lyapunov stability theory, it is shown that the robust adaptive closed-loop systems can be ensured to be asymptotically stable under the influence of actuator faults and bounded perturbations. An example is provided to further illustrate the fault compensation effectiveness.     

Robust H ∞ and adaptive tracking control against actuator faults with a linearised aircraft application

This article studies the problem of designing adaptive fault-tolerant H _∞ tracking controllers for a class of aircraft flight systems against general actuator faults and bounded perturbations. A robust adaptive state-feedback controller is constructed by a stabilising controller gain and an adaptive control gain function. Using mode-dependent Lyapunov functions, linear matrix inequality-based conditions are developed to find the controller gain such that disturbance attenuation performance is optimised. Adaptive control schemes are proposed to estimate the unknown controller parameters on-line for unparametrisable stuck faults and perturbation compensations. Based on Lyapunov stability theory, it is shown that the resulting closed-loop systems can guarantee asymptotic tracking with H _∞ performances in the presence of faults on actuators and perturbations. An application to a decoupled linearised dynamic aircraft system and its simulation results are given.     

基于MMST分组的一类MIMO非线性系统执行器故障自适应补偿控制

在多输入多输出(Multiple-input multiple-output,MIMO)非线性系统的执行器故障容错控制问题中,控制器能够处理的执行器故障集合的大小与执行器分组方法有很大关系.为扩大系统可处理的执行器故障集合,本文针对一类具有执行器故障的MIMO非线性最小相位系统,提出基于多模型切换(Multiple model switching and tuning,MMST)执行器分组的自适应补偿控制方法.考虑系统的执行器卡死、部分失效和完全失效故障,在微分几何反馈线性化的基础上,研究基于多模型切换的执行器分组切换指标和切换策略,设计了基于反演控制的自适应补偿跟踪控制律,所设计的控制律能保证系统在执行器故障时闭环稳定,渐近跟踪给定的参考信号,且提出的分组方法扩大了可补偿的执行器故障集合.仿真结果表明了本文设计方法的有效性.     

Robust adaptive actuator failure compensation for a class of uncertain nonlinear systems

This paper presents a robust adaptive state feedback control scheme for a class of parametric-strict-feedback nonlinear systems in the presence of time varying actuator failures. The designed adaptive controller compensates a general class of actuator failures without any need for explicit fault detection. The parameters, times, and patterns of the considered failures are completely unknown. The proposed controller is constructed based on a backstepping design method. The global boundedness of all the closed-loop signals is guaranteed and the tracking error is proved to converge to a small neighborhood of the origin. The proposed approach is employed for a two-axis positioning stage system as well as an aircraft wing system. The simulation results show the correctness and effectiveness of the proposed robust adaptive actuator failure compensation approach.     

Adaptive inverse control for parametric strict feedback systems with unknown failures of hysteretic actuators

An adaptive compensation control scheme is proposed by using backstepping techniques for a class of uncertain nonlinear systems preceded by m hysteretic actuators, which exhibit unknown backlash nonlinearity and possibly experience unknown failures. An estimated smooth inverse of the actuator backlash is utilized in the controller design to compensate for the effects of the backlash and actuator failures. It is shown that the designed controllers can ensure all signals of closed‐loop system bounded for any failure pattern of hysteretic actuators and tracking performance is also maintained. Simulation studies confirm the effectiveness of the proposed controller, especially the improvement of system performances. Copyright © 2013 John Wiley & Sons, Ltd.     

Adaptive actuator compensation control with feedback linearization

An adaptive inverse controller is developed for feedback linearizable nonlinear systems with nonsmooth actuator nonlinearities. The use of an actuator nonlinearity inverse and a feedback linearizing controller leads to an error equation suitable for deriving an adaptive update law for the inverse parameters. Closed-loop signal boundedness is proved analytically, and system performance improvement is shown by simulation results. Such adaptive control schemes are also developed for multivariable nonlinear systems with actuator nonlinearities. For nonlinear systems that do not possess a relative degree, dynamic extension is employed to realize adaptive inverse compensation designs for actuator nonlinearities. These adaptive designs ensure closed-loop stability in the presence of uncertain actuator nonlinearities     

An adaptive control scheme for systems with unknown actuator failures

A state feedback output tracking adaptive control scheme is developed for plants with actuator failures characterized by the failure pattern that some inputs are stuck at some unknown fixed values at unknown time instants. New controller parametrization and adaptive law are developed under some relaxed system conditions. All closed-loop signals are bounded and the plant output tracks a given reference output asymptotically, despite the uncertainties in actuator failures and plant parameters. Simulation results verify the desired adaptive control system performance in the presence of actuator failures.     

Supervisory adaptive fault‐tolerant control against actuator failures with application to an aircraft

In this paper, a supervisory adaptive fault‐tolerant control scheme is proposed for a class of uncertain nonlinear systems with multiple inputs. The multiple inputs are the outputs of an actuator group that may act either on one control surface or on multiple control surfaces and may fail during operation. With some actuator groups as backups, the supervisory adaptive control includes 2 modes: the adaptive compensation mode and the switching mode. The former is used to compensate for the failure of an actuator group as long as at least one actuator of the group works normally, and the latter, to switch the controller from a failed group to a healthy one when the failure is detected by one of the monitoring functions that are constructed to supervise some variables related to system stability. It is shown that with the proposed scheme, all signals of the closed‐loop system are bounded, and prescribed transient and steady state performance of the tracking error can be guaranteed. An aircraft example is used to demonstrate the application of the proposed scheme.