Y4GeO8:Er3+,Yb3+ up-conversion phosphors for optical temperature sensor based on FIR technique

Herein, we reported novel Y₄GeO₈:Er³⁺,Yb³⁺ phosphors elaborated via conventional solid-state reaction, and we further explored their properties as optical thermometer by using fluorescence intensity ratio (FIR) method complemented by detailed analysis on crystal structure, up-conversion luminescence and energy transfer from Yb³⁺ to Er³⁺. Upon 980 nm laser excitation, Y₄GeO₈:Er³⁺,Yb³⁺ phosphors present 525, 547 and 659 nm emission bands assigned to the characteristic transitions of Er³⁺. Furthermore, Y₄GeO₈:Er³⁺,Yb³⁺ samples show outstanding temperature sensing performances. To be specific, the minimal temperature resolution is 0.03 K (303 K), and the relative sensitivity of FIR can be up to 1.152%/K (303 K). Hence, Y₄GeO₈:Er³⁺,Yb³⁺ phosphors can be possible candidates for thermometry devices.     

Energy transfer and luminescent properties of Tb3+ and Tb3+, Yb3+ doped CNGG phosphors

In this work,calcium niobium gallium garnet(Ca₃ Nb_1.6875Ga_3.1875O₁₂-CNGG) ceramic samples singledoped with Tb³⁺ and co-doped with Tb³⁺ and Yb³⁺ ions were sintered by the solid-state reaction method.The structural characterization of the samples was carried out by X-ray diffraction measurements.The optimal concentration of Tb³⁺ ions corresponding to the maximum luminescence in the green spectral range in CNGG:...     

Preparation and Luminescence of Er^3＋ Doped Oxyfluoride Glass Ceramics Containing LaF3 Nanocrystals

Er^3＋ doped transparent oxyfluoride glass ceramics version and near infrared luminescence behavior of Er^3＋ in containing LaF3 nanocrystals were prepared and the up-conglasses heat-treating time and temperature, the size （varied from 0 to 19 and glass ceramics were investigated. With increasing nm） and crystallinity （varied from 0 to 47%） of LaF3 nanocrystals in the glass ceramics are increased. The up-conversion luminescence intensity of Er^3＋ ions in the glass ceramics is much stronger than that in the glasses The near infrared emission of Er^3＋ ions in and increased significantly with increasing heat-treating time and temperature the glass ceramics is found to be similar to that in the glasses.     

Up-conversion luminescence properties of Yb^3＋ and Ho^3＋ co-doped Bi3.84W0.16O6.24 powder synthesized by hydrothermal method

Using polyethylene glycol (PEG) as the surfactant, Bi3.84W0.16O6.24 up-conversion luminescence nano-crystal co-doped with Yb3+ and Ho3+ ions was synthesized by the hydrothermal method. The structure and properties of luminescence powder were studied by X-ray diffraction (XRD) and scanning electron microscope (SEM). It was of cubic system when the sample was synthesized at a low temperature and the particle size was about 30 nm. The results showed that adding surfactants was useful to improve the powder agglomeration and the grain crystal was spherical. The green emission peak at 546 nm and red emission peak at 655 nm, corresponding to the ( 5F4, 5S2)→ 5 I 8 and the 5 F 5 → 5 I 8 transitions of Ho 3+ , respectively, were simultaneously observed at room temperature under excitation of 980 nm semiconductor laser. The up-conversion luminescence intensity was the strongest when the concentration ratio of Yb3+ /Ho3+ was 6:1 and the concentration of Ho 3+ ion was 1.5 mol.%. The up-conversion mechanism was also studied. The green and red emission peaks were the two-photon absorption according to the relationship between the pump power and the luminescence intensity.     

Down- and up-conversion processes in Nd3+/Yb3+ co-doped sodium calcium silicate glasses with concomitant Yb2+ assessment

Novel Nd³⁺/Yb³⁺ co-doped sodium calcium silicate glasses were prepared by melting quenching method:Spectroscopic study was carried out as a function of doping content by fixing sensitizer(Nd³⁺) concentration to 0.2 mol% and adjusting activator(Yb³⁺) from 0 to 1.0 mol%.The energy transfer(ET)mechanisms between Nd³⁺and Yb³⁺ are discussed based on their energy levels and excitation powerdependence emission intensity.Results show that...     

Long afterglow yellow luminescence from Pr3+ doped SrSc2O4

A yellow emitting long afterglow luminescence material SrSc₂O₄:Pr³⁺ was successfully prepared by solid state reaction method. SrSc₂O₄:Pr³⁺ phosphor shows a long afterglow luminescence peak at about 495, 545, 621, 630 and 657 nm, respectively, corresponding to the f–f transitions of Pr³⁺. The afterglow chromaticity coordinates of SrSc₂O₄:1 at%Pr³⁺ were calculated to be (0.35, 0.41), indicating that the afterglow emission is close to the light of yellow region. And, the afterglow luminescence of the optimal sample doped by 1 at%Pr³⁺ can persist for over 3 h. The thermoluminescence results suggest that there are three types of traps with depth of 0.61, 0.69 and 0.78 eV exiting for all the samples, which are produced by the addition of Pr³⁺ ions. The trap density of SrSc₂O₄:1 at%Pr³⁺ is the maximum when the incorporation of Pr³⁺ ions reaches 1 at%, which thus results in the longest afterglow luminescence. All the results indicate that SrSc₂O₄:Pr³⁺ can be a potential candidate of novel long afterglow phosphors.     

Role of localized phonon vibration in luminescence performance of Pr doped Ba(Mg0.28Zr0.16Ta0.56)O3 transparent ceramics

Oxygen-assisted high temperature solid-state reaction approach was employed for the fabrication of Pr activated Ba(Mg_0.28Zr_0.16Ta_0.56)O₃ transparent ceramic phosphor. Retiveld refinement of X-ray diffraction pattern was carried out to reveal the lattice parameters and crystal structural information. Under the blue-light excitation of λ_ex = 473 nm, the phosphor exhibits a sharp intense red emission centered at 645 nm, accompanied by several other weak peaks. PL evolution with temperature shows a significant luminescence quenching behavior, and the underlying multi-phonon interaction with optical center is revealed by proposing an unprecedent theoretical calculation work. Such a phonon effect is further confirmed from the red-shift of peak position with temperature, and the involved phonon energy of 50.7 meV is determined from Raman scattering measurement. More interestingly, the fitted results of transient-state PL spectra show a fluctuation of luminescence lifetime at various temperatures, further indicating a significant effect of phonon vibration in the system.     

Effects of Bi3+ on down-/up-conversion luminescence,temperature sensing and optical transition properties of Bi3+/Er3+ co-doped YNbO4 phosphors

A series of YNbO₄:Bi³⁺ and YNbO₄:Bi³⁺/Er³⁺ phosphors were prepared by a conventional high temperature solid–state reaction method. The results of XRD and Rietveld refinement confirm that monoclinic phase YNbO₄ samples are achieved. The down-/up-conversion luminescence of Er³⁺ ions was investigated under the excitation of ultraviolet light (327 nm) and near infrared light (980 nm). Under 327 nm excitation, broad visible emission band from Bi³⁺ ions and characteristic green emission peaks from Er³⁺ ions are simultaneously observed, while only strong green emissions from Er³⁺ ions are detected upon excitation of 980 nm. Remarkable emission enhancement is observed in down-/up-conversion luminescence processes by introducing Bi³⁺ ions into Er³⁺-doped YNbO₄ phosphors. Pumped current versus up-conversion emission intensity study shows that two-photon processes are responsible for both the green and the red up-conversion emissions of Er³⁺ ion. Through the study of the temperature sensing property of Er³⁺ ion, it is affirmed that the temperature sensitivity is sensitive to the doping concentration of Bi³⁺ ions. By comparing the experimental values of the radiative transition rate ratio of the two green emission levels of Er³⁺ ions and the theoretical values calculated by Judd-Ofelt (J-O) theory, it is concluded that the temperature sensing property of Er³⁺ ions is greatly affected by the energy level splitting.     

Synthesis and enhanced photoluminescence properties of red emitting divalent ion (Ca2+) doped Eu:Y2O3 nanophosphors for optoelectronic applications

This work presents the synthesis of Y₂O₃:Eu³⁺,xCa²⁺ (x = 0 mol%, 1 mol%, 3 mol%, 5 mol%, 7 mol%, 9 mol%, 11 mol%) nanophosphors with enhanced photoluminescence properties through a facile solution combustion method for optoelectronic, display, and lighting applications. The X-ray diffraction (XRD) patterns of the proposed nanophosphor reveal its structural properties and crystalline nature. The transmission electron microscope (TEM) results confirm the change in the shape of the particle and aggregation of particles after co-doping with Ca²⁺. Fourier transform infrared spectroscopy (FTIR) and Raman vibrations also confirm the presence of Y–O vibration and subsequently explain the crystalline nature, structural properties, and purity of the samples. All the synthesized nanophosphors samples emit intense red emission at 613 nm (⁵D₀→⁷F₂) under excitation with 235, 394 and 466 nm wavelengths of Eu³⁺ ions. The photoluminescence (PL) emission spectra excited with 235 nm illustrate the highest emission peak with two other emission peaks excited with 466 and 394 nm that is 1.4 times higher than 466 nm and 1.9 times enhanced by 394 nm wavelength, respectively. The emission intensity of Y₂O₃:Eu³⁺,xCa²⁺ (5 mol%) is increased 8-fold as compared to Eu:Y₂O₃. Doping with Ca²⁺ ions enhances the emission intensity of Eu:Y₂O₃ nanophosphors due to an increase in energy transfer in Ca²⁺→Eu³⁺ through asymmetry in the crystal field and by introduction of radiative defect centers through oxygen vacancies in the yttria matrix. It is also observed that the optical band gap and the lifetime of the ⁵D₀ level of Eu³⁺ ions in Y₂O₃:Eu³⁺,xCa²⁺ nanophosphor sample gets changed with a doping concentration of Ca²⁺ ions. Nanophosphor also reveals high thermal stability and quantum yield as estimating activation energy of 0.25 eV and 81%, respectively. CIE, CCT, and color purity values (>98%) show an improved red-emitting nanophosphor in the warm region of light, which makes this material superior with a specific potential application for UV-based white LEDs with security ink, display devices, and various other optoelectronics devices.     

Fabrication and long persistent luminescence of Ce3+-Cr3+ co-doped yttrium aluminum gallium garnet transparent ceramics

Persistent luminescence (PersL) materials are widely used in safety indication, traffic and transportation signs, architectural decoration and other fields. In this paper, (Y_1?xCe_x)₃(Al_0.9995Cr_0.0005)₂Ga₃O₁₂ (x = 0.001, 0.002, 0.003, 0.005) transparent ceramics were successfully prepared by solid-state reaction method in air followed by HIP post-treatment. With the increase of Ce³⁺ doping concentration, the optical quality of the as-prepared ceramics is improved and the morphology is denser. Luminescent quenching occurs when the Ce³⁺ concentration is more than 0.2%. The as-prepared transparent ceramics were annealed in different atmospheres. From the PersL decay curves, the transparent ceramics after air annealing show the best PersL performance: luminance with 4424.0 mcd/m² and PersL duration over 865 min after ceasing 365 nm excitation, respectively. The effects of Ce³⁺ doping concentration and annealing atmospheres are also discussed in detail.     

Elevating photoluminescence properties of Y3MgAl3SiO12:Ce3+ transparent ceramics for high-power white lighting

Compared with Y₃Al₅O₁₂:Ce³⁺,Y₃MgAl₃SiO₁₂:Ce³⁺(YMASG:Ce³⁺) reveals great potential for highpower white lighting with red-shift spectrum.Herein,YMASG:Ce³⁺ transparent ceramics were explored to be synthesized in the air following hot isostatic pressure(HIP) treatment to obtain tunable and optimized optical properties.Then phase purity,microstructure,transmittance,and photoluminescence of YM...     

Cr3+/Y3+ co-doped persistent luminescence nanoparticles with biological window activation for in vivo repeatable imaging

The near-infrared(NIR) persistent luminescence materials(PLMs) can remain long-lasting luminescence after removal of the excitation light,which permits bioimaging with high sensitivity owing to the absence of background fluorescence interference from in situ excitation.Recently,the NIR PLMs have aroused intensive research interest in bioimaging.However,the optimal excitation wavelength of current NIR PLMs is located in the ultraviolet region with shallow tissue penetration,making it difficult to...     

Optical,thermal and luminescence properties of La2O3–Ga2O3–ZrO2 glasses co-doped with Tm3+/Yb3+ prepared by containerless technique

Bulk La₂O₃–Ga₂O₃–ZrO₂ (LGZ) glass and Tm³⁺/Yb³⁺ co-doped LGZ glasses were synthesized successfully using containerless technique. Raman spectra result reveals that the matrix sample possesses the low maximum phonon energy of ～642 cm^?1. The glasses show good compatibility between large Abbe numbers (>31) and high refractive indices (n_d > 1.93). Moreover, transmittance measurements reflect that the glasses have high infrared transmittance of ～81.9%, small OH^– absorption coefficient and long mid-infrared cut-off wavelengths (～7.5 μm). The surface morphology of host glass was characterized by scanning electron microscopy (SEM) micrograph and energy dispersive spectroscopy (EDS) tests reflect that the doped compositions are distributed into the matrix glass homogeneously. The results of thermal analysis show that the glasses have good thermal properties (T_g > 769 °C). Excited by 980 nm laser, an intense 1810 nm fluorescence is obtained originating from the transition: ³F₄ → ³H₆ of Tm³⁺ ion, accompanied by upconversion emission. It can be observed that 1810 nm fluorescence has the highest intensity at 1 mol% Yb₂O₃ and owns broad full width at half-maximum (>245 nm), the luminescence intensity of ³F₄ → ³H₆ transition increases with rising temperature from 300 to 550 K. Furthermore, the value of energy transfer efficiency shows that Yb³⁺ can transfer energy to Tm³⁺ effectively. By fitting the attenuation curves, the lifetimes of 1810 and 474 nm emission can be acquired.     

Sm3+ ions doped Sm2Si2O7-based glass ceramics:Crystallization,luminescence and energy transfer process through heat treatment

Sm³⁺ ions incorporated Sm₂Si₂O₇ crystalline phase formed in the aluminoborosilicate glass matrix synthesized via melting quenching technique followed by heat-treatment process is reported herewith.The preliminary confirmation on the obtained glass ceramics was made through X-ray diffration(XRD) studies.Formation of non-bridging oxygens(NBOs) in the glass network and the modes of vibrations of network units we re analyzed through Fourier transform infra...     

Upconversion luminescence of Y2O3：Er^3＋ ,Yb^3＋ nanoparticles prepared by a homogeneous precipitation method

Y2O3： Er^3＋, Yb^3＋ nanoparticles were synthesized by a homogeneous precipitation method without and with different concentrations of EDTA 2Na. Upconversion luminescence spectra of the samples were studied under 980 nm laser excitation. The results of XRD showed that the obtained Y2O3：Er^3＋,Yb^3＋ nanoparticles were of a cubic structure. The average crystallite sizes calculated were in the range of 28-40 nm. Green and red upconversion emission were observed, and attributed to ^2H11/2,^4S3/2→^4I15/2 and ^4F9/2→^4I15/2 transitions of the ion, respectively. The ratio of the intensity of green emission to that of red emission drastically changed with a change in the EDTA 2Na concentration. In the sample synthesized without EDTA, the relative intensity of the green emission was weaker than that of the red emission. The relative intensities of green emission increased with the increased amount of EDTA 2Na used. The possible upconversion luminescence mechanisms were discussed.     

Optical and electrical conductivity properties of rare earth elements (Sm,Y, La,Er) co-doped CeO2

In this research, un-doped CeO₂ and Ce_0.85La_0.10M_0.05O₂ (M: Sm, Er, Y) compounds were synthesized by hydrothermal method and the multi-functional properties are reported. Oxygen defects were created with the additives of rare earth ions. The electrical and luminescence behaviors of the synthesized compounds were investigated in accord with the types of additives. The synthesized products were characterized by X-ray diffraction (XRD) analysis, Brunauer–Emmett–Teller (BET) measurement, UV–vis diffuse reflectance spectroscopy (DRS), scanning electron microscopy (SEM), photoluminescence (PL) spectroscopy and electrochemical impedance spectroscopic (EIS). All synthesized compounds are found to be nano-structured and have cubic phase. The total conductivity of all samples was calculated. Hence, the total conductivity of un-doped CeO₂, Ce_0.85La_0.10Y_0.05O₂, Ce_0.85La_0.10Er_0.05O₂ and Ce_0.85La_0.10Sm_0.05O₂ is found to be 2.07 × 10^?10, 5.70 × 10^?4, 1.0 × 10^?3 and 0.0747 S/cm, respectively. Also, bandgap energy (E_g) of these samples calculated from UV visible absorption spectra is discussed, and the optical results show variation between 3.2 and 2.15 eV. Additionally, the luminescence properties of the compounds were investigated and different emissions occur depending on the additive type. Accordingly, photoluminescent emission spectra of Ce_0.85La_0.10Y_0.05O₂, Ce_0.85La_0.10Er_0.05O₂ and Ce_0.85La_0.10Sm_0.05O₂ phosphors indicate that these phosphors have red, green and orange-red colors, respectively.     

Preparation and luminescence properties of orange-red Ba3Y4O9:Sm3+ phosphors

A novel orange-red emitting Ba₃Y₄O₉:Sm³⁺ phosphors were prepared by a high temperature solid-state reaction in air. X-ray diffraction (XRD), photoluminescence spectra, fluorescence decay and temperature-dependent emission spectra were utilized to characterize the structure and luminescence properties. The results show that the excitation spectrum includes a series of linear peaks at 350, 367, 382, 410, 424, 445, 470 and 495 nm, respectively. Under 410 nm excitation, the emission peaks were located at 574 nm (⁴G_5/2—⁶H_5/2), 608 nm (⁴G_5/2—⁶H_7/2), 659 nm (⁴G_5/2—⁶H_9/2) and 722 nm (⁴G_5/2—⁶H_11/2), respectively. The concentration quenching occurs when x equals 0.08 for Ba₃Y_4–xO₉:xSm³⁺ phosphor and its mechanism is ascribed to the dipole–dipole interaction. The chromaticity coordinates of Ba₃Y_3.92O₉:0.08Sm³⁺ phosphor are in the orange-red region. The temperature-dependent study shows that this phosphor has excellent luminescence thermal-stability. And the luminescence intensity of Ba₃Y_3.92O₉:0.08Sm³⁺ phosphor at 473 K only declines by about 25.75% of its initial intensity. The experimental data indicate that Ba₃Y₄O₉:Sm³⁺ phosphor may be promising as an orange-red emitting phosphor for white light emitting diodes.     

White up-conversion luminescence and highly-sensitive optical temperature sensing in Na3La(VO4)2:Yb,Er,Tm,Ho phosphors

In this work,tunable white up-conversion luminescence was achieved in the Yb³⁺,Er³⁺,Tm³⁺,Ho³⁺ codoped Na₃La(VO₄)₂ phosphors under 980 nm excitation.The emissions of three primary colors are mainly attributed to the ²H_11/2/⁴S_3/2→⁴I_15/2 transitions of Er³⁺,¹G₄→³H₆ transition of Tm³⁺,and_5...     

Energy transfer process of Nd3+/Ho3+ co-doped fluoride halide glasses with anion substituted multi-wavelength tunable mid-infrared luminescence

Ho³⁺ doped ZBLAN glass with 2.0 and 2.9 μm emission was prepared. In order to further improve the luminescence of Ho³⁺, halogen ions (Cl, Br, I) were introduced to reduce the maximum phonon energy and phonon state density of the sample. At the same time, Nd³⁺ was introduced to transfer the energy to Ho³⁺ pumped with a 793 nm laser (Nd³⁺:⁴F_5/2,⁴F_3/2→Ho³⁺:⁵I₆). The effect of different halogen ion on the luminescent properties of the fluoride halide glass was compared. The results show that the luminescent intensity of infrared increases with the introduction of different halogen ions. By comparison, it is found that the sample with I^– has the strongest luminescence of 1064 nm, 2.0 μm and 2.9 μm. This is consistent with the calculated J-O intensity parameters. In addition, the 2.0 and 2.9 μm emission of Ho³⁺ pumped with a 450 nm laser will not disappear. A mid-infrared sample with multi-wavelength excitation and multi-wavelength emission can be obtained. Nd³⁺/Ho³⁺ co-doped fluoride halide glasses with 1064 nm, 2.0 μm and 2.9 μm luminescence were prepared by melt quenching method. The luminescent mechanism and the energy transfer process between the two ions of Nd³⁺/Ho³⁺ co-doped fluoride halide glass were studied. The J-O parameters, luminescence lifetime and absorption emission cross-sectional area of Ho³⁺ and Nd³⁺ were calculated, respectively. It is found that the value of Ω₂ in the glass matrix increases with the introduction of different halogen ions, while Ω₄ and Ω₆ do not change obviously in different glass compositions. This is because the environment of the crystal field around the rare earth ions changes. The crystal phase and phonon energy of the sample were analyzed by X-ray diffraction pattern and a Fourier transform infrared spectrometer, respectively. Based on the above spectra and data (phonon energy is 634.71 cm⁻¹), it can be predicted that Nd³⁺/Ho³⁺ co-doped fluoride halide glass is a potential mid-infrared luminescent material.     

Synthesis and luminescent properties of Ba3Y3.88Gd0.12O9:Eu3+ phosphors with enhanced red emission

In this work, the Gd³⁺/Eu³⁺ activated Ba₃Y₄O₉ (BYO) phosphors were successfully synthesized via coprecipitation method at 1400 °C. The precursor composition, crystal structure stability, microscopic morphology, photoluminescence (PL)/photoluminescence excitation (PLE) spectra and fluorescence attenuation analysis of the phosphors are discussed in detail. The chemical composition of the precursor was determined by Fourier transform infrared spectroscopy (FT-IR) and thermogravimetry (TG) analysis; According to field emission-scanning electron microscopy (FE-SEM) analysis, it is found that the particle size of phosphor is uniform and the agglomeration is few. According to PL/PLE spectra analysis, Ba₃Y_3.28Eu_0.6Gd_0.12O₉ phosphors has the strongest excitation band at 260 nm and the strongest emission band at 614 nm, and the fluorescence intensity of Ba₃Y_3.28Eu_0.6Gd_0.12O₉ is higher than that of Ba₃Y_3.4Eu_0.6O₉. The quenching concentration of Eu³⁺ in Ba₃Y_3.88–4xEu_4xGd_0.12O₉ phosphors is x = 0.15 and the mechanism of quenching concentration of Eu³⁺ is electric dipole-quadrupole type interactions. The lifetime value of Ba₃Y_3.88–4xEu_4xGd_0.12O₉ (x = 0.15) phosphors is 0.686 ms and decreases with the increase of Eu³⁺ content. In addition, the CIE chromaticity diagram of Ba₃Y_3.28Eu_0.6Gd_0.12O₉ phosphors is (0.66, 0.34). Finally, the lamp beads assembled with Ba₃Y_3.28Eu_0.6Gd_0.12O₉ phosphors have an ideal luminous effect. Therefore, the Ba₃Y_3.88–4xEu_4xGd_0.12O₉ phosphors designed in this work may hopefully meet the requirements of various lighting and optical display applications.