四旋翼无人机姿态系统复合连续快速非奇异终端滑模控制EI北大核心CSCD

本文针对受多源干扰影响的四旋翼无人机姿态系统,基于复合连续快速非奇异终端滑模算法,研究了姿态指令变化率未知情况下的连续有限时间姿态跟踪控制问题.首先,基于四旋翼无人机姿态回路动力学模型,通过引入虚拟控制量实现姿态跟踪误差动态的三通道解耦;其次,分别针对各通道跟踪误差动态设计高阶滑模观测器,实现跟踪误差变化率和集总干扰的有限时间估计;最后,结合姿态跟踪误差变化率的估计信息,构建动态快速非奇异终端滑模面,并在控制设计中用指数幂函数代替符号函数以保证控制量连续.并且基于Lyapunov分析方法给出了姿态跟踪误差有限时间收敛的严格证明,仿真结果验证了所提方法的有效性.     

多无人机编队递归非奇异终端滑模容错控制

为解决四旋翼无人机编队飞行过程中易受到外部干扰、空气阻力、执行器故障等不确定因素影响的问题,提出了一种基于补偿函数观测器(CFO)的递归非奇异终端滑模控制(RNTSMC)方法来提高四旋翼无人机编队系统性能。首先,引入具有高精度估计的补偿函数观测器,实时估计外部干扰、执行器故障等信息,通过设计递归积分终端滑模面改进非奇异终端滑模面等效控制器对估计信息进行补偿控制,并给定滑模面初始值,保证两滑模面依次连续到达平衡点,确保跟踪误差在有限的时间内快速收敛到0。其次,根据长机-僚机法建立编队模型,基于滑模控制理论,设计编队协同控制器,保证无人机编队完成飞行任务。最后,通过对比仿真结果表明,该方法对四旋翼无人机编队具有良好的容错性能。     

飞翼无人机复合连续非奇异终端滑模姿态跟踪容错控制

本文针对受多源干扰和舵面故障影响的飞翼无人机系统姿态跟踪控制问题进行研究, 提出了一种基于高阶滑模观测器的复合连续非奇异终端滑模主动抗干扰容错控制算法, 在实现姿态跟踪误差有限时间收敛的同时, 保证了控制量的连续. 并且针对控制力矩的具体实现问题, 结合飞翼无人机气动舵面冗余特性, 给出了基于加权伪逆算法的舵面分配方案, 该方案在满足舵面约束的情况下, 保证了舵面偏转角度的最优. 仿真结果表明, 所提控制方案显著提升了飞翼无人机姿态跟踪精度和跟踪误差的收敛速度, 并且保证了所有舵面满足偏角约束.     

四旋翼无人机抗干扰轨迹跟踪控制

针对四旋翼无人机轨迹跟踪过程中存在的参数不确定与外界干扰问题,设计一种双闭环自适应控制策略.为了降低控制器设计复杂度,根据四旋翼无人机系统的欠驱动特性将系统分成姿态内环和位置外环.在扰动观测器的基础上,利用积分型反步控制算法完成无人机位置信息在外界干扰下的稳定跟踪控制.在扰动观测器的基础上,利用自适应滑模控制算法完成无人机姿态信息在参数不确定和外界干扰作用下的稳定跟踪控制.与传统PID控制和滑模控制进行仿真对比,验证所提出控制策略的优越性.     

四旋翼无人机安全轨迹跟踪控制

针对存在安全约束的四旋翼无人机,为了保证其能够快速稳定地跟踪给定轨迹,本文提出了一种基于双闭环思想及控制障碍函数求解二次规划问题的控制器设计框架.首先,考虑到无人机的模型不确定性及外界干扰问题,基于快速非奇异终端滑模面设计了双闭环标称控制器,能够实现有限时间快速收敛.进一步地,为了解决无人机遇到的状态、距离约束等安全控制问题,利用控制障碍函数,将带有约束的控制器设计问题转化成二次规划的求解问题.最后,对提出的控制策略进行了仿真,验证了控制器的快速性和鲁棒性,并实现了给定轨迹的安全跟踪.     

采用滑模观测器的六旋翼指令滤波鲁棒控制

针对包含复合干扰的六旋翼无人机鲁棒控制问题,提出了一种基于滑模观测器的指令滤波鲁棒控制方法。建立了包含复合干扰的六旋翼无人机位置和姿态的数学模型,并对位置回路设计了滑模控制律,从而解算出姿态指令;根据姿态角回路输出的虚拟控制律,设计了指令滤波器来抑制微分爆炸现象,并利用辅助滤波器补偿指令滤波的误差;在角速度回路鲁棒控制律中引入滑模观测器,对包括模型误差和外界扰动的复合干扰进行补偿,实现了六旋翼UAV的指令滤波鲁棒控制。仿真结果表明：提出的指令滤波鲁棒控制律与指令滤波自适应控制方法相比,在复合干扰下具有更优的稳定性、准确性和快速性,位置和姿态的最大误差分别仅为0.05?m和0.5°,滑模观测器的估计误差也仅为0.2 （°）/s,能够在更短的时间内实现对六旋翼UAV位移和姿态的鲁棒控制。     

航天器自适应快速非奇异终端滑模容错控制

针对存在外部干扰、转动惯量矩阵不确定以及执行器故障的航天器姿态跟踪控制问题,本文提出了基于自适应快速非奇异终端滑模的有限时间收敛故障容错控制方案.通过引入能够避免奇异点,且具有有限时间收敛特性的快速非奇异终端滑模面,设计了满足多约束条件有限时间收敛的姿态跟踪容错控制律,利用参数自适应方法使控制器不依赖转动惯量和外部干扰的上界信息.Lyapunov稳定性分析表明:在存在外部干扰、转动惯量矩阵不确定以及执行器故障等约束条件下,本文设计的控制律能够保证闭环系统的快速收敛性,而且对执行器故障具有良好的容错性能.数值仿真校验了该控制律在姿态跟踪控制中的优良性能.     

四旋翼无人机轨迹跟踪的容错控制

针对四旋翼无人机轨迹跟踪的容错控制问题,提出了一个鲁棒[H∞]控制和干扰观测器与故障估计器相结合的容错复合控制器的方法。在外部有界扰动和加性故障的条件下,实现对四旋翼无人机的轨迹跟踪。将四旋翼无人机非线性动态模型解耦成独立的外环位置控制系统和内环角度控制系统,引入区间矩阵对系统参数进行描述,使用干扰观测器和故障估计器进行干扰和故障的估计和补偿。然后设计一个复合控制器既能更好地抑制干扰又能保证无人机在自身存在故障的情况下平稳飞行。通过仿真证明该方法的有效性。     

基于扰动和摩擦补偿的柔性机械臂系统非奇异快速终端滑模控制

本文针对系统中存在的关节摩擦、动力学参数不确定性和外部负载干扰等因素引起的柔性机械臂系统控制性能下降的问题,提出了一种基于扰动和摩擦补偿的非奇异快速终端滑模控制方法(NFTSMC-DE-FC).首先,设计扰动估计器(DE)对系统未知动态参数和负载干扰进行估计.然后,针对扰动估计器不能精确估计的关节摩擦力矩进行辨识.最后,利用滑模控制技术设计非奇异快速终端滑模控制器,并将扰动估计值和摩擦力辨识值以前馈的方式进行补偿,实现对柔性机械臂系统给定参考轨迹跟踪的准确性以及对外界扰动的鲁棒性.值得注意的是,与传统只使用扰动估计器的方法相比,本文考虑到了摩擦力等非线性因素的影响,并利用辨识技术对摩擦力进行辨识,提高了控制精度.利用Lyapunov稳定性定理从理论上证明了所设计的控制器可以保证闭环系统的稳定性.实验结果表明,相较于非奇异快速终端滑模控制方法(NFTSMC)和基于扰动估计器的非奇异快速终端滑模控制方法(NFTSMC-DE),所提方法提高了柔性机械臂系统的轨迹跟踪性能.     

饱和输入下四旋翼无人机滑模轨迹跟踪控制

为解决四旋翼无人机在饱和输入下的轨迹跟踪控制问题,同时兼顾系统存在的参数不确定性和外部风力扰动影响,设计了一种改进的抗干扰自适应鲁棒滑模控制方法;基于六自由度架构,设计四旋翼无人机简化的系统模型,进而降低控制器设计的复杂程度;引入带有误差信号的滑模函数,设计带有误差信号的饱和补偿自适应控制律,同时增加鲁棒控制项,降低由于饱和输入问题带来的抖振影响,并减小参数不确定和外部风力扰动对系统稳定性的影响;系统模型与抗干扰自适应控制律相结合,形成了改进的抗干扰自适应鲁棒滑模控制策略,实现四旋翼无人机的位置轨迹和姿态轨迹的稳定跟踪;最后通过数值仿真与传统PD控制算法进行仿真比较,验证控制方法的有效性和优越性。     

Adaptive sliding mode trajectory tracking control for wheeled mobile robots

This paper discusses the problem of adaptive sliding mode trajectory tracking control for wheeled mobile robots in the presence of external disturbances and inertia uncertainties. A new fast nonsingular terminal sliding mode surface without any constraint is proposed, which not only avoids singularity, but also retains the advantages of sliding mode control. In order to implement the trajectory tracking mission, the error dynamic system is divided into a second-order subsystem and a third-order one. First, an adaptive fast nonsingular terminal sliding mode control law of the angular velocity is constructed for stabilising the second-order subsystem in finite time. Then, another adaptive fast nonsingular terminal sliding mode control law of the linear velocity is designed to guarantee the stability of the third-order subsystem. Finally, a simulation example is provided to demonstrate the validity of the proposed control scheme.     

交会对接模拟系统姿态位置耦合有限时间控制

针对航天器交会对接模拟系统的姿态同步和位置跟踪控制问题,在存在外界扰动和系统不确定性的情况下,基于改进的快速非奇异终端滑模面和改进的自适应律,采用双闭环控制结构分别设计内环和外环有限时间姿态位置耦合控制器.所提出的自适应律不仅能有效地抑制扰动和不确定性且能保证控制器是连续的.李雅普诺夫理论推导和仿真结果表明,所提出的控制方法能保证系统内环和外环跟踪误差的有限时间稳定性和准确收敛性.     

Robust adaptive fixed‐time tracking control of 6‐DOF spacecraft fly‐around mission for noncooperative target

The fixed‐time relative position tracking and attitude synchronization control problem of a spacecraft fly‐around mission for a noncooperative target in the presence of parameter uncertainties and external disturbances is investigated. Firstly, a novel and coupled relative position and attitude motion model for a noncooperative fly‐around mission is established. Subsequently, a novel nonsingular fast terminal sliding mode (NFTSM) surface is developed, and the explicit estimation of the convergence time independent of initial states is provided. Fair and systematic comparisons among several typical terminal sliding modes show that the designed NFTSM has faster convergence performance than the fast terminal sliding mode. Then, a robust integrated adaptive fixed‐time NFTSM control law with no precise knowledge of the mass and inertia matrix and disturbances by combining the nonsingular terminal sliding mode technique with an adaptive methodology is proposed, which can eliminate the chattering phenomenon and guarantee that the relative position and attitude tracking errors can converge into the small regions containing the origin in fixed time. Finally, numerical simulations are performed to demonstrate the effectiveness of the proposed control schemes.     

Velocity-free adaptive nonsingular fast terminal sliding mode finite-time attitude tracking control for spacecraft

Aiming at the attitude tracking control problem of rigid spacecraft under the condition of unmeasurable angular velocity information, a velocity-free adaptive nonsingular fast terminal sliding mode finite-time tracking control method is proposed. The finite-time extended-state observer is used to estimate the attitude tracking speed errors and the integrated disturbances. Combined with the above control method, a fast nonsingular terminal sliding mode controller with attitude measurement is designed and the adaptive technology is introduced to compensate for the influence of observation errors on the controller. The finite-time convergence of the observer and the control method was demonstrated based on Lyapunov theory, and the effectiveness of the proposed method is verified by numerical simulations.     

Nonsingular terminal sliding mode based finite-time control for spacecraft attitude tracking

This paper studies finite-time attitude tracking control problem of a rigid spacecraft system with external disturbances and inertia uncertainties. Firstly, a new finite-time attitude tracking control law is designed using nonsingular terminal sliding mode concepts. In the absence and presence of external disturbances and inertia uncertainties, this controller can drive the attitude and angular velocity tracking errors to reach zero in finite time. Secondly, a finite-time disturbance observer is introduced to estimate the disturbance, and a composite controller is developed which consists of a feedback control based on nonsingular terminal sliding mode method and compensation term based on finite-time disturbance observer. Finite-time convergence of attitude tracking errors and the stability of the closed-loop system is ensured by the Lyapunov approach. Numerical simulations on attitude control of spacecraft are also given to demonstrate the performance of the proposed controllers.     

Quadrotor Control Via Robust Generalized Dynamic Inversion and Adaptive Non‐Singular Terminal Sliding Mode

A robust two‐loops structured control system design for quadrotor's position/attitude trajectory tracking is proposed. The aim of the outer loop is to provide the roll/pitch tilting commands to the inner loop, which in turns generates the tilting angles that control the quadrotor's center of gravity in the horizontal plane. The outer loop utilizes Robust Generalized Dynamic Inversion (RGDI) of a prescribed asymptotically stable differential equation in the deviation function of the horizontal position coordinates from their reference trajectories. The inner loop employs an Adaptive Non‐singular Terminal Sliding Mode (ANTSM) to control the tilting angles, in addition to controlling the yaw attitude angle and the vertical position coordinate. The proposed scheme solves the singularity avoidance problems of generalized inversion and terminal sliding mode control. The stability of outer and inner loop is ensured by utilizing positive definite Lyapunov energy function for stable tracking performance against parametric variations and bounded unknown external disturbances. Numerous simulations are conducted on a six Degrees of Freedom (DoF) quadrotor model in the presence of parametric variations, un modeled dynamics, and external disturbances.     

四旋翼无人飞行器的轨迹跟踪与滑模事件驱动控制

四旋翼飞行器作为一个典型的欠驱动的系统,具有强耦合、非线性等特性.针对飞行器外部干扰、和通信资源受限条件下的轨迹跟踪控制问题,进行滑模事件驱动控制方法的研究.首先,分析动力学特性,通过时间尺度分解方法将系统解耦成位置子系统和姿态子系统.其次,将位置子系统转化为严格反馈形式,设计反步滑模控制器,实现位置轨迹稳定跟踪;针对姿态子系统存在时变有界扰动及通信受限,设计滑模事件驱动控制律,在抑制干扰的同时实现对虚拟姿态跟踪指令的跟踪.根据Lyapunov分析方法证明了所设计控制器的稳定性,并通过理论分析证明闭环控制系统不会出现Zeno现象.最后,仿真结果验证了滑模事件驱动控制律在存在外部扰动和通信受限时四旋翼无人飞行器轨迹跟踪的鲁棒性.