镀锌板上丙烯酸树脂复合膜的制备和表征

在镀锌钢板表面制备了丙烯酸树脂复合膜,用扫描电子显微镜观察膜层的微观形貌.用傅里叶变换红外光谱表征膜层的分子结构,用中性盐雾试验和电化学方法测试其耐蚀性,并用划痕浸泡实验测试膜层的自修复性能.结果表明:丙烯酸树脂复合膜表面致密平整;耐中性盐雾腐蚀达72 h;阻抗值和极化电阻值均较大,说明丙烯酸树脂复合膜能有效抑制腐蚀电化学反应;划痕浸泡试验证明丙烯酸树脂复合膜具有自修复功能.成膜过程中碳酸锆铵能够和丙烯酸树脂分子上的羟基和羧基发生交联反应,形成互穿网络结构,提高膜层内部的交联密度,有效地阻挡外界环境的侵蚀,当膜层破损时钼酸盐和磷酸盐与锌反应形成难溶盐吸附在破损处,起到自修复作用.     

电镀锌板钼酸盐体系钝化膜的制备和腐蚀性能研究

采用钼酸盐作为主成膜物质对电镀锌板进行钝化处理,采用低浓度铬酸盐作为对比试验。用硫酸铜点滴试验、电化学交流阻抗、极化曲线和金相显微镜观察等方法检验膜层的腐蚀性能。结果表明:钼酸盐-硅烷、钼酸盐-硅烷-有机酸复合钝化可有效提高电镀锌层的腐蚀电位,降低腐蚀电流密度,抑制腐蚀的电化学过程,所以提高了镀锌板的耐腐蚀性,而且比低浓度铬酸盐钝化膜耐蚀性更好。     

锌酸盐镀锌层的三价铬溶液钝化

采用电化学方法、扫描电镜和X射线光电子能谱研究了锌酸盐镀锌层的三价铬钝化膜的电化学性能、表面结构与成膜机理。结果表明：锌酸盐镀锌层的三价铬钝化膜表面结构致密、无明显裂纹，具有较好的耐腐蚀性能；这种钝化膜表层与里层的组成不同，表层的组成为Cr2O3-Cr（OH）3-ZnO共混物；里层（离表层10-30nm处）的主要组成为Cr2O3-ZnO-Zn共混物；钝化膜的成膜过程可能包括镀锌层的溶解、碱性薄层的形成、胶状膜的形成和胶状膜转化成钝化膜4个步骤。     

铝及铝合金无铬钝化研究进展

铝合金可加工成各种板材、型材、铝铸件,为了减少其在工业环境中的腐蚀损失,需进行钝化处理.钝化常作为涂层的预处理步骤,钝化膜能增强铝合金表面与有机涂层的结合力,进一步提高涂层对基体的防护能力.目前无铬钝化主要是钼酸盐钝化、稀土盐钝化、锆/钛盐钝化及有机物钝化,因此对这几种主要化学钝化法的研究进程及现状进行了综述.钼酸盐复配其他盐协同缓蚀,能够获得更强的耐腐蚀性能.稀土盐中加入强氧化剂和成膜促进剂,可以简化处理工艺,降低腐蚀电流.锆、钛盐中加入有机物形成复合膜,能够改善单一膜层的耐腐蚀性能,提高与基体的结合力.硅烷在铝合金表面形成交联结构,从而表现出良好的封闭效果.在硅烷中加入纳米粒子可以获得更好的膜层表面形貌,加入稀土及其氧化物可提高耐腐蚀性能.硅烷两步法成膜过程中,成膜次序不同能够获得不同的膜层物理性能和耐蚀效果.最后,对未来无铬钝化工艺的研究方向进行了展望.     

热镀Zn层钼酸盐钝化工艺

研究了用低毒性钼酸盐取代剧毒的重铬酸盐对热镀 Zn层进行钝化的工艺,探讨了钝化液组成、pH值、钝化处理温度及时间对钝化成膜及膜层耐 蚀性的影响.中性盐雾腐蚀(NSS)试验表明,采用该工艺可获得耐蚀性与低Cr钝化相当的具有 较为均匀的淡黄或浅蓝色钝化膜.     

电镀锌钢板黑变机理的动力学

为探索铬酸盐钝化膜提高锌镀层耐蚀性的机理和研究其发生黑变的初期腐蚀现象， 对电镀锌钢板黑变的动力学规律进行了研究。以湿热实验中镀锌层表面明度差随时间变化的关系来表征钝化和未钝化试片腐蚀的速度， 发现钝化后的镀锌层的腐蚀规律符合Ｗａｇｎｅｒ 方程， 未钝化的镀锌层的腐蚀规律符合对数方程， 并求出了相应的腐蚀反应的活化能。钝化使腐蚀反应的活化能提高了一个数量级以上。实验结果表明该腐蚀是由于氧的向内扩散和锌离子的向外扩散， 钝化膜的存在影响了腐蚀的历程。     

热浸镀锌层上丙烯酸树脂和钨酸盐复合钝化工艺研究

运用丙烯酸树脂与钨酸盐复合钝化,通过正交试验法对热镀锌层钝化工艺进行了优化。此外,采用单因素变量法、硫酸铜点滴试验、中性盐雾腐蚀试验以及电化学测试研究了工艺参数对钝化膜外观和耐蚀性的影响。结果表明:最佳钝化工艺:45 g/L丙烯酸树脂,25 g/L钨酸钠,8 g/L硫脲,15 g/L KF,10 m L/L H_2O_2,pH值为11,钝化40 s,钝化温度30℃。通过最优钝化工艺能获得表面平整、光亮的钝化膜。钝化膜中性盐雾试验出现白锈的时间可达72 h,明显优于未钝化镀锌层。     

机械镀锌层钝化工艺研究

针对目前机械镀锌的钝化多为借鉴电镀锌、热浸镀锌的钝化工艺,其工艺不稳定、处理效果差等问题,本文借助醋酸铅点滴实验法分析了机械镀锌层的出光、钝化工艺。采用盐水浸泡试验、电化学极化法分析了机械镀锌层钝化膜的耐腐蚀性能。研究结果表明,采用由柠檬酸、乙二醇、OP-10组成的出光液对镀层腐蚀较弱,出光后镀层表面光亮,钝化膜醋酸铅点滴发黑时间短。优化并确定了机械镀锌层的无铬亮白钝化、低铬蓝白钝化和低铬亮白钝化三种钝化液组成,三种钝化膜均能提高镀层的耐蚀性能,改善镀层的外观光泽性。其中低铬亮白钝化处理后的钝化膜耐腐蚀性能最佳。     

镀锌层无铬(Ⅵ)钝化的现状与发展趋向

概述了国内外镀锌层无铬（Ⅵ）钝化工艺的新进展，包括三价铬钝化、钼酸盐钝化、钨酸盐钝化、钛盐钝化、单宁酸钝化、植酸钝化．亡艺，及在研究上有较大进展的改性硅酸盐钝化、稀土金属盐钝化、有机硅烷钝化及无机-有机物复合型钝化等工艺。并在此基础上进一步提出了镀锌层无铬钝化的发展方向。     

添加剂对电镀锌层烷氧基硅烷钝化膜电化学行为的影响

为提高镀锌层钝化膜的耐蚀性,利用极化曲线和交流阻抗谱,研究了不同添加剂对镀锌层烷氧基硅烷钝化膜腐蚀性能的影响.并与加速腐蚀试验结果进行了对比.试验结果表明,添加剂的加入明显改变了钝化膜层的腐蚀电位,提高钝化膜的交流阻抗值,烷氧基硅烷钝化膜的耐蚀性明显提高.     

Effects of Post-weld Heat Treatment on Microstructure,Mechanical Properties and the Role of Weld Reinforcement in 2219 Aluminum Alloy TIG-Welded Joints

In as-welded state, each region of 2219 aluminum alloy TIG-welded joint shows diff erent microstructure and microhardness due to the diff erent welding heat cycles and the resulting evolution of second phases. After the post-weld heat treatment, both the amount and the size of the eutectic structure or θ phases decreased. Correspondingly, both the Cu content in α-Al matrix and the microhardness increased to a similar level in each region of the joint, and the tensile strength of the entire joint was greatly improved. Post-weld heat treatment played the role of solid solution strengthening and aging strengthening. After the post-weld heat treatment, the weld performance became similar to other regions, but weld reinforcements lost their reinforcing eff ect on the weld and their existence was more of an adverse eff ect. The joint without weld reinforcements after the post-weld heat treatment had the optimal tensile properties, and the specimens randomly crack in the weld zone.     

新型的治疗阿尔茨海默氏症药物(1-二甲基磷酰基-2,2,2-三氯)-乙基-1-醇烟酸醋对体外神经细胞的作用

目的: 观察本实验室合成的一种治疗阿尔茨海默氏症(AD)的药物(1-二甲基磷酰基-2, 2, 2 -三氯)-乙基^-1-醇烟酸醋(NMF),对体外培养的皮层神经细胞活性的影响以及对海人藻酸(KA)所致的神经损伤的保护作用。方法: 采用体外培养皮层神经元的方法,解剖分离 15 d胚胎小鼠皮层神经细胞, 接种于 96孔板,48 h 后加药并培养 72 h,以 MIT 法 观察 NMF 对小鼠皮层神经细胞活性的影响;同时将接种于 24 孔板的细胞预先给予 NMF,d 3 时加或不加KA处理后,以台盼蓝染色鉴别并计数死、活细胞,可得出细胞的存活率。结果: NMF 明显促进胎鼠皮层神经元活性,其中 NMF1、0. 1、10nmol·L^-1促进神经元活性增殖率分别高达 34.7%、37.4%、36. 7%, NMF 明显促进正常胎鼠皮层神经元存活卒,与对照组比较,10nmol·L^-1 NMF 对皮层神经元的存活率分别提高 39.3%、73.5%。 NMF能显著 对抗 KA 所致的神经元损伤,与 KA 损伤组相比, NMF0.1、10、10nmol·L^-1对损伤皮层神经元的保护率分别为 77.30%、80.10%、84.15%。结论: NMF 明 显促进胎鼠皮层神经元的洁性、提高正常皮层神经元,的存活卒,并能有效地保护KA所致的神经元损伤,提示 NMF 是一种很有潜力的治疗 AD 的药物。     

The First Phase of the SRIF Industrialized Base in ＂West Area＂ Has Been Put into Operation

After nearly two years＇ tense construction, the first phase of industrialized base of Shenyang Research Institute of Foundry （SRIF）, located at the Tiexi Casting and Forging Industrial Park in the west of Tiexi District, has now been completed and formally put into operation.     

THERMODYNAMICS STUDY ON THE DECOMPOSITION OF CHROMITE WITH KOH

Institute of Process Engineering, Chinese Academy of Sciences, China, has proposed a method for oxidative leaching of chromite with potassium hydroxide. Understanding the mechanism of chromite decomposition, especially in the potassium hydroxide fusion, is important for the optimization of the operating parameters of the oxidative leaching process. A traditional thermodynamic method is proposed and the thermal decomposition and the reaction decomposition during the oxidative leaching of chromite with KOH and oxygen is discussed, which suggests that chromite is mainly destroyed by reactions with KOH and oxygen. Meanwhile, equilibrium of the main reactions of the above process was calculated at different temperatures and oxygen partial pressures. The stable zones of productions, namely, K2CrO4 and Fe2O3, increase with the decrease of temperature, which indicates that higher temperature is not beneficial to thermodynamic reactions. In addition, a comparison of the general alkali methods is carried out, and it is concluded that the KOH leaching process is thermodynamically superior to the conventional chromate production process.     

INFLUENCE OF HEAT TREATMENT ON DAMPING BEHAVIOUR OF THE MAGNESIUM WROUGHT ALLOY AZ61

The effect of isochronal heat treatments for 1h on variation of damping, hardness and microstructural change of the magnesium wrought alloy AZ61 was investigated. Damping and hardness behaviour could be attributed to the evolution of precipitation process. The influence of precipitation on damping behaviour was explained in the framework of the dislocation string model of Granato and Lücke.     

Three-Dimensional Growth of Coherent Ferrite in Austenite: A Molecular Dynamics Study

Coherent second phase often exhibits anisotropic morphology with specifi c orientations with respect to both the second and the matrix phases. As a key feature of microstructure, the morphology of the coherent particles is essential for understanding the second-phase strengthening eff ect in various industrial alloys. This letter reports anisotropic growth of coherent ferrite from austenite matrix in pure iron based on molecular dynamics simulation. We found that the ferrite grain tends to grow into an elongated plate-like shape, independent of its initial confi guration. The fi nal shape of the ferrite is closely related to the misfi t between the two phases, with the longest direction and the broad facet of the plate being, respectively, consistent with the best matching direction and the best matching plane calculated via the Burgers vector content(BVC) method. The strain energy calculation in the framework of Eshelby's inclusion theory verifi es that the simulated orientation of the coherent ferrite is energetically favorable. It is anticipated that the BVC method will be applicable in analysis of anisotropic growth and morphology of coherent second phase in other phase transformation systems.     

Effect of Rare Earth Doping on Impedance,Modulus and Conductivity Properties of Multiferroic Composites:0.5(BiLa_xFe_(1-x)O_3)–0.5(PbTiO_3)

The Lanthanum-doped bismuth ferrite–lead titanate compositions of 0.5(Bi LaxFe1-xO3)–0.5(Pb Ti O3)(x = 0.05,0.10,0.15,0.20)(BLxF1-x-PT) were prepared by mixed oxide method.Structural characterization was performed by X-ray diffraction and shows a tetragonal structure at room temperature.The lattice parameter c/a ratio decreases with increasing of La(x = 0.05–0.20) concentration of the composites.The effect of charge carrier/ion hopping mechanism,conductivity,relaxation process and impedance parameters was studied using an impedance analyzer in a wide frequency range(102–106Hz) at different temperatures.The nature of Nyquist plot confirms the presence of bulk effects only,and non-Debye type of relaxation processes occurs in the composites.The electrical modulus exhibits an important role of the hopping mechanism in the electrical transport process of the materials.The ac conductivity and dc conductivity of the materials were studied,and the activation energy found to be 0.81,0.77,0.76 and 0.74 e V for all compositions of x = 0.05–0.20 at different temperatures(200–300 °C).     

Using Finite Element and Contour Method to Evaluate Residual Stress in Thick Ti-6Al-4V Alloy Welded by Electron Beam Welding

This work was to reveal the residual stress profile in electron beam welded Ti-6Al-4V alloy plates(50 mm thick) by using finite element and contour measurement methods.A three-dimensional finite element model of 50-mmthick titanium component was proposed,in which a column–cone combined heat source model was used to simulate the temperature field and a thermo-elastic–plastic model to analyze residual stress in a weld joint based on ABAQUS software.Considering the uncertainty of welding simulation,the computation was calibrated by experimental data of contour measurement method.Both test and simulated results show that residual stresses on the surface and inside the weld zone are significantly different and present a narrow and large gradient feature in the weld joint.The peak tensile stress exceeds the yield strength of base materials inside weld,which are distinctly different from residual stress of the thin Ti-6Al-4V alloy plates presented in references before.     

Microstructures and Tensile Properties of Ultrafine-Grained Ni–(1–3.5) wt% SiC_(NP) Composites Prepared by a Powder Metallurgy Route

Silicon carbide nanoparticle-reinforced nickel-based composites(Ni–Si CNP),with a Si CNPcontent ranged from1 to 3.5 wt%,were prepared using mechanical alloying and spark plasma sintering.In addition,unreinforced pure nickel samples were also prepared for comparative purposes.To characterize the microstructural properties of both the unreinforced pure nickel and the Ni–Si CNPcomposites transmission electron microscopy(TEM) was used,while their mechanical behavior was investigated using the Vickers pyramid method for hardness measurements and a universal tensile testing machine for tensile tests.TEM results showed an array of dislocation lines decorated in the sintered pure nickel sample,whereas,for the Ni–Si CNPcomposites,the presence of nano-dispersed Si CNPand twinning crystals was observed.These homogeneously distributed Si CNPwere found located either within the matrix,between twins or on grain boundaries.For the Ni–Si CNPcomposites,coerced coarsening of the Si CNPassembly occurred with increasing Si CNPcontent.Furthermore,the grain sizes of the Ni–Si CNPcomposites were much finer than that of the unreinforced pure nickel,which was considered to be due to the composite ball milling process.In all cases,the Ni–Si CNPcomposites showed higher strengths and hardness values than the unreinforced pure nickel,likely due to a combination of dispersion strengthening(Orowan effects) and particle strengthening(Hall–Petch effects).For the Ni–Si CNPcomposites,the strength increased initially and then decreased as a function of Si CNPcontent,whereas their elongation percentages decreased linearly.Compared to all materials tested,the Ni–Si CNPcomposite containing 1.5% Si C was found more superior considering both their strength and plastic properties.     

Directional Growth of Tin Crystals Controlled by Combined Solute Concentration Gradient Field and Static Magnetic Field

A new method was introduced to achieve directional growth of Sn crystals. Microstructures in liquid(Pb)/liquid(Sn) diffusion couples were investigated under various static magnetic fields. Results show that the β-Sn crystals mainly reveal an irregular dendritic morphology without or with a relatively low static magnetic field(B0.3 T). When the magnetic field is increased to 0.5 T, the β-Sn dendrites close to the final stage of growth begin to show some directional character. With a further increase in the magnetic field to a higher level(0.8–5 T), the β-Sn dendrites have an enhanced directional growth character, but the dendrites show a certain deflection. As the magnetic field is increased to 12 T, the directional growth of the β-Sn dendrites in the center of the couple is severely destroyed. The mechanism of the directional growth of the β-Sn crystals and the deflection of the β-Sn crystals with the application of static magnetic field was tentatively discussed.