Adsorption of cadmium ions from aqueous solutions by activated carbon with oxygen-containing functional groups

The adsorption of aqueous cadmium ions (Cd(II)) have been investigated for modified activated carbon (AC-T) with oxygen-containing functional groups. The oxygen-containing groups of AC-T play an important role in Cd(II) ion adsorption onto AC-T. The modified activated carbon is characterized by scanning electron microscopy, Fourier transform infrared spectroscopy (FT-IR) and X-ray photoelectron spectroscopy (XPS). The results of batch experiments indicate that the maximal adsorption could be achieved over the broad pH range of 4.5 to 6.5. Adsorption isotherms and kinetic study suggest that the sorption of Cd(II) onto AC-T produces monolayer coverage and that adsorption is controlled by chemical adsorption. And the adsorbent has a good reusability. According to the FT-IR and XPS analyses, electrostatic attraction and cation exchange between Cd(II) and oxygen-containing functional groups on AC-T are dominant mechanisms for Cd(II) adsorption.     

Modified activated carbons with amino groups and their copper adsorption properties in aqueous solution

Activated carbons were prepared by two chemical methods and the adsorption of Cu (II) on activated carbons from aqueous solution containing amino groups was studied. The first method involved the chlorination of activated carbon following by substitution of chloride groups with amino groups, and the second involved the nitrilation of activated carbon with reduction of nitro groups to amino groups. Resultant activated carbons were characterized in terms of porous structure, elemental analysis, FTIR spectroscopy, XPS, Boehm titration, and pHzpc. Kinetic and equilibrium tests were performed for copper adsorption in the batch mode. Also, adsorption mechanism and effect of pH on the adsorption of Cu (II) ions were discussed. Adsorption study shows enhanced adsorption for copper on the modified activated carbons, mainly by the presence of amino groups, and the Freundlich model is applicable for the activated carbons. It is suggested that binding of nitrogen atoms with Cu (II) ions is stronger than that with H+ions due to relatively higher divalent charge or stronger electrostatic force.     

Adsorption Behavior of Cd (II) from Aqueous Solution using Dialdehyde 5-Aminophenanthroline Starch

Dialdehyde 5-aminophenanthroline starch (DASAPL) was synthesized by reacting 5-aminophenanthroline with dialdehyde starch, and it was characterized through elemental analysis, FT-IR, and SEM techniques. FT-IR of DASAPL revealed the incorporation of C?N group and the disappearance of the C?O (carbonyl) group. DASAPL was used to adsorb Cd (II) from aqueous solution. The adsorption process was optimized with regard to pH, contact time, initial Cd (II) concentration, and temperature. The results revealed that the initial pH 5 and contact time of 2 h were the optimal conditions. The material showed good adsorption capacity and the adsorption data followed the Freundlich and Langmuir model. The adsorption of Cd (II) decreased with increasing temperature indicating exothermic nature of the adsorption process. Thermodynamic studies have been used to determine thermodynamic parameters of the process including Gibbs free energy, enthalpy, and entropy changes. Moreover, the adsorbents can be reused.     

Application of novel hybrid bioadsorbent,tannin/chitosan/sericite,for the removal of Pb(II) toxic ion from aqueous solution

We addressed the development of a novel, low-cost, and high-efficient material from hybrid materials, known as microcapsules. Microcapsules are a composite adsorbent made of a mixture of tannin, sericite and chitosan. The FT-IR analysis showed that the microcapsules contain hydroxyl, carboxyl, carbonyl, and amino groups, which play an important role in the adsorption of heavy metals. The microcapsules were able to remove 99% of Pb(II) in 30 min, and obtained a removal efficiency of more than (13-50)%, compared with the single adsorbents of tannin, chitosan, and sericite. In adsorption kinetic analysis, pseudo-second-order adsorption was more suitable than pseudo-first-order adsorption, and chemical adsorption did not limit the adsorption rate of Pb(II) ion. In isothermal adsorption, Langmuir adsorption was more suitable than Freundlich adsorption, and the maximum Langmuir adsorption capacity was 167.82 (mg/g). Furthermore, desorption and reusability studies, as well as the applicability of the material for wastewater treatment, demonstrated that microcapsules offer a promising hybrid material for the efficient removal of significant water pollutants, i.e., Pb(II) from aqueous solutions.     

Sulfhydryl functionalized activated carbon for Pb(II) ions removal: kinetics,isotherms, and mechanism

ABSTRACT

The novel organic capturing agent was synthesized through the amidation of 2-amino-5-guanidinopentanoic acid anchored on activated carbon with dimercaptosuccinic acid for effective elimination of toxic Pb(II) ions originated from contaminated water. The SH@AGPA@AC was examined by FT-IR, thermo-gravimetric analysis–DTG, scanning electron microscopy, transmission electron microscopy, Brunauer-Emmett Teller (BET), and X-ray photoelectron spectroscopy (XPS). The influence of experimental conditions like pH, adsorption time, initial Pb(II) concentration, and temperature on the performance of Pb(II) capturing was examined. The results revealed that the SH@AGPA@AC adsorbent was successfully fabricated. The kinetics data achieved a quite fit with the pseudo-second-order model. The SH@AGPA@AC obeyed the Langmuir model. The Pb(II) was fully desorbed with HCl (0.1 M) acid and then ready to reuse in the subsequent cycle after rinsing with water with the identical organic moieties of the SH@AGPA@AC. Thus, the SH@AGPA@AC was considered as an achievable and auspicious candidate for Pb(II) elimination from contaminated water with the highest adsorption capacities amount to 116.3 mg/g.     

New adsorbent material based on nitrothiophene-functionalized silica particles for aqueous heavy metals removal

Research of efficient materials is a well-established technology. In this work, a novel and excellent host, with sulfur donor atom, for heavy metals adsorption was synthesized by chemical immobilization of nitrothiophene receptor onto silica particles. The new adsorbent was well characterized by Brunauer–Emmett–Teller, Barrett-Joyner-Halenda, scanning electron microscopy, elemental analysis, FT-IR, and solid-state ¹³C nuclear magnetic resonance. The new surface exhibits good thermal stability determined by thermogravimetric analysis, and a good chemical stability as investigated in various acidic and buffer solutions. The adsorption properties were investigated using Cu(II), Pb(II), Cd(II), and Zn(II) metals by varying all relevant parameters including pH, contact time, concentration, temperature, kinetics, and Langmuir isotherms. The adsorption efficiency increases with increasing pH and follows pseudo-second-order kinetics. The maximum equilibrium time was found to be 30?min for all metal ions. The thermodynamic analysis (ΔH°, ΔS°, and ΔG°) revealed that the adsorption was endothermic and spontaneous.     

Polyethylenimine-modified sugarcane bagasse cellulose as an effective adsorbent for removing Cu(II) from aqueous solution

Polyethylenimine-modified sugarcane bagasse cellulose (SBCMP), as a new adsorbent, was synthesized by the reaction of polyethylenimine (PEI) with sugarcane bagasse cellulose and glutaraldehyde. The adsorption of Cu(II) by SBCMP was pH-dependent, and the higher removal efficiency of Cu(II) appeared in the range of pH 3.0–6.0. The adsorption isothermal data fitted well with the Langmuir model, and the maximum adsorption capacity of SBCMP was up to 107.5 mg/g. The adsorption kinetics was best described by the pseudo-second-order kinetic. The adsorption of Cu(II) by SBCMP was unfavorable at high temperatures, and thermodynamic analyses implied that the adsorption of Cu(II) by SBCMP was an exothermic reaction. Fourier transform infrared spectroscopy (FT-IR) combined with X-ray photoelectron spectroscopy (XPS) revealed that Cu(II) adsorption on SBCMP mainly controlled by the nitrogen atoms of  NH group in PEI. The results of regeneration cycles showed that SBCMP was suitable for reuse in the adsorption of Cu(II) from aqueous solution. These experimental results suggested that SBCMP is expected to be a new biomass adsorbent with high efficiency in removing Cu(II) from wastewater.     

Chitosan nanoparticles extracted from shrimp shells,application for removal of Fe(II) and Mn(II) from aqueous phases

ABSTRACT

The present work aims to prepare an ecofriendly and effective material for adsorption of heavy metals, especially iron and manganese from polluted water. Chitosan nanoparticles were prepared from the extracted chitosan of shrimp shells waste using a traditional ionic gelation method in presence of sodium tripolyphosphate as a cross-linker. To confirm the polymer structure and its characteristics, the prepared nanoparticles were characterized using FT-IR, X-Ray diffraction, TEM and SEM. Molecular weight, the degree of de-acetylation, ash content, particle size and zeta potential values were 3923 D, 75 %, 4 %, 331 nm and +38 mv, respectively. A batch equilibrium experiments were carried out to evaluate the chitosan nanoparticles as adsorbents of Fe (II) and Mn (II) ions from aqueous solutions. The removal efficiency and adsorption capacity were studied at different contact times, pH of the sorption medium, and initial metal ion concentration in the feed solution. The removal efficiency and maximum adsorption capacity of Fe (II) and Mn (II) were 99.8, 116.2 mg/g and 95.3%, 74.1mg/g, respectively. From the adsorption isotherm and kinetic studies, it was found that the Langmuir and the pseud-second order models, respectively, were more fitted in this study.     

Synthesis of Amine-Functionalized MCM-41 and MCM-48 for Removal of Heavy Metal Ions from Aqueous Solutions

In this research amino functional mesoporous MCM-41 and MCM-48 materials were prepared in an attempt to develop efficient adsorbents for removal of heavy metals from aqueous solutions. The adsorbents were characterized by XRD, FTIR, and TG-DTG techniques. The synthesized adsorbents were used for the removal of Cu(II), Co(II), Cd(II), and Pb(II) from aqueous solutions for the first time, and the influence of some effective parameters including concentration, initial pH, contact time, and temperature on the sorption process was studied and optimized. Significant adsorption capacities were obtained at low concentrations. The kinetic studies showed that the adsorption process was fast and more than 90% of equilibrium capacity was achieved within 60 min. Experimental kinetic data was well fitted with the pseudo-second-order kinetic model. Thermodynamic parameters computed from the experimental data showed that the adsorption was endothermic and spontaneous.     

Polyamide-baghouse dust nanocomposite for removal of methylene blue and metals: Characterization,kinetic, thermodynamic and regeneration

In this research, polyamide modified baghouse dust nanocomposite (PMBHD) was synthesized from steel industry waste using the interfacial polymerization technique. Adsorption capacities of the PMBHD were examined for the uptake of cadmium Cd (II), lead Pb (II), and methylene blue MB from simulated solutions. The effects of different operational factors of the adsorption, including contact time, pH, adsorbent dosage, initial concentration, and temperature, were investigated. The obtained results revealed that the equilibrium data of MB, Pb (II), and Cd (II) were best fitted to Dubinin-Radushkevich, Langmuir, and Freundlich isotherm. Maximum removal uptake was found to be 6.08, 119, and 234 mg·g^-1, whereas maximum removal efficiencies of 90%, 99.8%, and 98% were achieved for MB, Pb (II), and Cd (II). Adsorption kinetics of MB and metals well-fitted to the pseudo-second-order kinetic. The characterization results showed the presence of polymeric chain on the surface of the PMBHD. The thermodynamic study revealed that the values of the free energy ΔG for Pb (II) and Cd (II) were found to be negative, which indicates spontaneous, energetic, and favorable adsorption. While for MB removal, positive values of (ΔG) were noticed, which implies that the adsorption was unfavorable. The proposed mechanism for the adsorption of MB and metals on the PMBHD showed that the dominating mechanism is physisorption. The adsorption/desorption results verified the high reusability of the PMBHD for adsorption of MB and metals.     

Chemical functionalization of chitosan biopolymer and chitosan-magnetite nanocomposite with sulfonic acid for acid-catalyzed reactions

Chemical functionalization of chitosan biopolymer and chitosan-magnetite nanocomposite was performed with sulfonic acid functional groups to achieve new solid acid materials. The sulfonic acid functional groups were created through the ring opening nucleophilic reaction of amine groups of chitosan with 1,4-butane sultone. Fourier transform infrared spectroscopy (FT-IR) and X-ray photoelectron spectroscopies (XPS) verified the successful sulfonic acid functionalization of chitosan. The obtained sulfonic acid functionalized chitosan-magnetite nanocomposite showed superparamagnetic properties according to the vibrating sample magnetometry analysis and exhibited magnetic separation feature from dispersed mixtures. Nitrogen adsorption-desorption analysis indicated the increase in surface area after formation of chitosan-magnetite nanocomposite and functionalization with sulfonic acid. Both of the prepared solid acids exhibited high catalytic activities in the acid-catalyzed acetic acid esterification with n-butanol and benzaldehyde acetalization with ethylene glycol as model reactions. Furthermore, they can be reused several times without considerable loss of their activities.     

Adsorption and desorption properties of cationic polyethylene film gels to organic anions and their regeneration

An investigation was undertaken on the adsorption and desorption properties of 2‐(dimethylamino)ethyl methacrylate grafted polyethylene (PE‐g‐PDMAEMA) films to anionic dye anions with one to three sulfonic groups in response to pH and temperature changes. The amounts of dye anions adsorbed on the PE‐g‐PDMAEMA films passed through the maximum values at about pH 3 because of an increase in the protonation of dimethylamino groups caused by a decrease in the pH value. The amounts of adsorbed dye anions decreased below pH 3 because the ionic strength increased with the addition of HCl to adjust the initial pH values of the aqueous dye solutions. The amounts of adsorbed dye anions decreased with an increase in the number of sulfonic groups in the dye molecules at the same pH value because electrostatic repulsion was generated between free sulfonic groups of the dye anions adsorbed onto the PE‐g‐PDMAEMA films and free dye anions in the medium. A large number of dye anions adsorbed were desorbed from the PE‐g‐PDMAEMA film with initial pH values above 11.0. The cyclic processes of adsorption at pH 3.0 and desorption at pH 11.0 were repeated without considerable fatigue. The PE‐g‐PDMAEMA films showed practically regenerative adsorption and desorption behavior in response to the pH changes. In addition, when the dye‐anion‐adsorbed PE‐g‐PDMAEMA films were alternately immersed in water at two different temperatures, dye anions were desorbed in water at higher temperatures without any chemical agents because of the deprotonation of dimethylamino groups and thermosensitive contraction of grafted PDMAEMA chains. These results indicate that PE‐g‐PDMAEMA films can be applied as regenerative ion‐exchange membranes for adsorption and desorption processes of anionic compounds in response to the pH and temperature. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 99: 381–391, 2006     

Efficient adsorption to hexavalent chromium by iron oxalate modified D301:Characterization,performance and mechanisms

Chromium is a common harmful pollutant with high toxicity and low bearing capacity of soil and water. Excellent salinity resistance, a wide p H range, and high regeneration capacity were essential for qualified adsorbents used in removing hexavalent chromium(Cr(VI)) from polluted water. Herein, iron oxalate modified weak basic resin(IO@D301) for the removal of Cr(VI) was prepared by the impregnation method. The IO@D301 was characterized by scanning electron microscope(SEM), Fourier transform infrared spectroscopy(FTIR), X-Ray diffraction(XRD)and X-ray photoelectron spectroscopy(XPS). Owing to abundant amine, carboxyl groups and iron ions existing on the surface, IO@D301 possesses high adsorption and salinity resistance capacity for Cr(VI). The maximum adsorption capacity of IO301 towards Cr(VI) reached 201.30 mg·g~(-1) at 293 K and a p H of 5. The adsorption equilibrium was well fitted by the Freundlich model, and the adsorption process was described by the pseudofirst-order kinetics model as spontaneous and exothermic. The mechanism may be identified as electrostatic attraction, coordination, and reduction, which was confirmed by FT-IR and X-ray photoelectron spectroscopy.     

Pb(II) ion adsorption by biomass-based carbonaceous fiber modified by the integrated oxidation and vulcanization

Biomass-based activated carbonaceous fiber (ACF) was modified by nitric-acid oxidation under microwave heating (ACF-O) and then further treated by thioglycolic acid (ACF-S) to prepare carbon materials with high capability for the removal of Pb(II) ions. The physico-chemical properties of the original and modified ACF samples were characterized by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), Zeta potential, Boehm titration, BET, Raman spectrum and X-ray photoelectron spectroscopy (XPS). It was found that modification treatments damage the pore and graphite crystalline structure of ACF, while the micropore structure is protected and extra oxygen-containing surface functional groups are grafted on its surface. The adsorption performance of the original and the modified ACF samples affected by adsorption conditions regarding to Pb(II) ion strength (10 mg/L–105 mg/L), contact time (10 min–120 min), pH value (2.5–6.5), and solvent temperature (15 °C–45 °C) was investigated through batch experiments. Compared to the maximum Pb(II) ion adsorption capacity of 75.24 mg/g by ACF sample, the value was substantially improved by the integrated modification method (193.42 mg/g for ACF-O and 209.21 mg/g for ACF-S sample). The Biot number determined from the homogeneous surface diffusion model (HSDM) was between 1 and 100 for the original and modified ACF samples, suggesting that the adsorption process of Pb(II) ions is limited by both the surface diffusion and film mass transfer.     

Separation,Preconcentration, and Recovery of Pd(II) Ions using Newly Modified Silica Gel with Bis(3-Aminopropyl)Amine

Bis(3-aminopropyl)amine bonded silica gel (BAPA-SG) was synthesized and characterized by elemental analysis and FT-IR spectroscopy, and tested for adsorption, preconcentration, and recovery of Pd(II) ions. The effective parameters on the preconcentration of Pd(II) ions such as pH, volume, and flow rate of the Pd(II) solution, and the type and volume of eluent solution, and also matrix ions such as alkaline and heavy metals were investigated. Flame atomic absorption spectrometry was used for the determination of Pd(II) concentration. The modified silica gel could adsorb Pd(II) ions quantitatively from the solutions up to 400 mL at pH 1.0 by the flow rate of 5 mL/min. The retained Pd(II) ions could be easily eluted by using 5 mL of 1% (m/v) thiourea in 1.0 M HCl solution. The recovery of Pd(II) ions was 95 ± 2% at 95% confidence level. The analytical detection limit of Pd was found to be 0.36 µg L^?1 at the preconcentration factor of 80. Selective adsorption of Pd(II) ions over some base metal ions was also investigated. The developed method was applied to spent auto catalyst for palladium recovery, and a certified ore sample for the determination of palladium content.     

聚乙烯亚胺原位改性多孔灯芯草高效吸附废水中的Cr(Ⅵ)

为了制备具有胺基利用率高、结构稳定、使用方便的Cr（Ⅵ）吸附材料,以聚乙烯亚胺（PEI）为胺基改性剂,具有类海绵多孔结构的灯芯草（JC）为支撑基材,将吸入JC的PEI通过环氧氯丙烷原位接枝于其纤维表面,获得可整块使用的多孔吸附材料（PEI-JC）。采用元素分析、SEM、FT-IR、XPS表征PEI-JC的组成与结构,分析PEI-JC对Cr（Ⅵ）的吸附机理。考察PEI浓度、溶液的pH、Cr（Ⅵ）浓度与共存化合物等因素对吸附的影响。结果表明,质量分数为10.0%的PEI所制备的PEI_10.0-JC,在30℃与pH为2.0的条件下,其Langmuir模型的最大吸附量为474.6 mg·g^-1;PEI_10.0-JC可将含各种共存化合物溶液中的Cr（Ⅵ）从10 mg·L^-1降至排放标准（0.5 mg·L^-1）以下;PEI_10.0-JC可重复使用,其结构在吸附过程中未发生明显变化;吸附与还原作用是PEI-JC去除水溶液中Cr（Ⅵ）的主要机制。     

Removal of Cu2+ and Pb2+ ions from aqueous solutions by starch-graft-acrylic acid/montmorillonite superabsorbent nanocomposite hydrogels

In this study, the removal of copper(II) and lead(II) ions from aqueous solutions by Starch-graft-acrylic acid/montmorillonite (S-g-AA/MMT) nanocomposite hydrogels was investigated. For this purpose, various factors affecting the removal of heavy metal ions, such as treatment time with the solution, initial pH of the solution, initial metal ion concentration, and MMT content were investigated. The metal ion removal capacities of copolymers increased with increasing pH, and pH 4 was found to be the optimal pH value for maximum metal removal capacity. Adsorption data of the nanocomposite hydrogels were modeled by the pseudo-second-order kinetic equation in order to investigate heavy metal ions adsorption mechanism. The observed affinity order in competitive removal of heavy metals was found Cu²⁺ > Pb²⁺. The Freundlich equations were used to fit the equilibrium isotherms. The Freundlich adsorption law was applicable to be adsorption of metal ions onto nanocomposite hydrogel.     

Synthesis and characterization of novel bifunctional mesoporous silica catalyst and its scope for one-pot deacetalization–knoevenagel reaction

Bifunctional (both sulfonic and amine functionalized) mesoporous silica catalysts were prepared by hydrothermal method. (3-[2-(2-amino ethyl amino) ethyl amino] propyl trimethoxysilane) and (3-mercaptopropyl) trimethoxysilane respectively were used as amine and sulfonic sources. The synthesised bifunctional materials were fully characterized by BET, P-XRD, ²⁹Si CPMAS-NMR, FTIR, XPS and SEM spectral analysis. FTIR and NMR results endorse the successful grafting of organic amines and sulfonic group by surface silanol of silica. The presence of of N and S groups in the catalyst material was confirmed by the XPS spectra. Catalytic activity of the bifunctional material was tested for one-pot deacetalization–knoevenagel reaction, which gave excellent yield (95 %). Catalyst is reusable with little loss of activity up to 4 runs (<6 %).     

Fixed-bed column study on removal of Mn(II), Ni(II) and Cu(II) from aqueous solution by surfactant bilayer supported alumina

In the present work, the potential of modified alumina for the removal of heavy metals such as Mn(II), Ni(II) and Cu(II) was evaluated in a fixed-bed column operation. The effects of bed depth, flow rate and initial concentration on the removal of Mn(II), Ni(II) and Cu(II) were investigated at the optimum pH. The modified alumina was found to be very efficient for the removal of such heavy metals from water environment. Bed depth service time (BDST) model was best fitted to adsorption data. The theoretical and experimental breakthrough curves were comparable for all heavy metals.