Synthesis and characterization of novel photo‐crosslinkable fluorinated poly(phthalazinone ether)s for optical waveguides

A series of novel photo‐crosslinkable fluorinated poly(phthalazinone ether)s containing 1,1‐diphenylethylene segments in the polymer main chain, used for optical waveguide materials, were synthesized by polycondensation reaction of decafluorobiphenyl with a mixture of 4‐(4‐hydroxylphenyl)(2H)‐phthalazin‐1‐one (DHPZ), 4,4‐(hexafluoroisopropylidene)diphenol and 1,1‐bis(4‐hydroxyphenyl)ethylene (BHPE) as co‐reactant. The feed ratio of DHPZ to total bisphenols varied from 0 to 80 mol%, while that of BHPE remained at 20 mol% for all polymers. The obtained copolymers show good solubility in some common polar organic solvents. The resulting polymers were photo‐crosslinked after UV irradiation for 10 min in the presence of a photoinitiator. The cured polymers show good chemical resistance, high thermal stability (temperatures of 1% mass loss after curing of 472–496 °C under nitrogen) and high glass transition temperatures (160–249 °C) which could be further increased by about 10 °C after photochemical crosslinking. By adjusting the copolymerizing bisphenol content, the refractive indices of transverse electric and transverse magnetic modes (at 1550 nm) of films of the polymers were exactly tuned in the range 1.5029–1.5661 and 1.4950–1.5502, respectively. The propagation losses of the cured films were measured and found to be less than 0.3 dB cm^?1 at 1550 nm, indicating the promise of these materials for passive optical waveguide devices. Copyright © 2011 Society of Chemical Industry     

Preparation and electro‐optic properties of novel Y‐type polyimides with highly enhanced thermal stability of second harmonic generation

BACKGROUND: In the development of nonlinear optical (NLO) polymers for electro‐optic device applications, stabilization of electrically induced dipole alignment is one of the important criteria. Polyimides for NLO applications have attracted attention because of their high T_g values and high thermal stability. In this work we designed and synthesized a new type of NLO polyimide, in which the pendant NLO chromophores are parts of the polymer backbone. These mid‐type NLO polymers are expected to have the merits of both main‐chain and side‐chain NLO polymers: stabilization of dipole alignment and good solubility. RESULTS: 3,4‐Bis‐(3,4‐dicarboxyphenylcarboxyethoxy)‐4′‐nitrostilbene dianhydride was prepared and reacted with the corresponding aromatic diamine to yield unprecedented Y‐type polyimides containing 3,4‐dioxynitrostilbenyl groups as NLO chromophores, which constituted parts of the polymer backbones. The resulting polyimides are soluble in polar solvents such as dimethylformamide and dimethylsulfoxide. These polymers showed a thermal stability up to 320 °C in thermogravimetric thermograms with T_g values obtained from differential scanning calorimetry thermograms in the range 143–164 °C. The second harmonic generation (SHG) coefficients (d₃₃) of poled polymer films at the 1064 nm^?1 fundamental wavelength were around 9.45 × 10^?18 C. CONCLUSION: The dipole alignment exhibited exceptionally high thermal stability even at 30 °C higher than T_g. There was no SHG decay below 180–190 °C because of the partial main‐chain character of the polymer structure, which is acceptable for NLO device applications. Copyright © 2007 Society of Chemical Industry     

Synthesis of novel polyurethanes containing dioxybenzylidenecyanoacetate,as non‐linear optical chromophores and their properties

Methyl 3,4‐di‐(2′‐hydroxyethoxy)benzylidenecyanoacetate (3) was prepared by hydrolysis of methyl 3,4‐di‐(2′‐vinyloxyethoxy)benzylidenecyanoacetate (2). Diol 3 was condensed with 2,4‐toluenediisocyanate, 3,3′‐dimethoxy‐4,4′‐biphenylenediisocyanate, and 1,6‐hexamethylenediisocyanate to yield polyurethanes 4, 5 and 6 containing the non‐linear optical (NLO) chromophore 3,4‐dioxybenzylidenecyanoacetate. The resulting polyurethanes 4–6 were soluble in common organic solvents such as acetone and DMF. T_g values of the polymers obtained from DSC thermograms were in the range 80–102 °C. Polymers 4–6 showed thermal stability up to 300 °C in TGA thermograms, and electro‐optic coefficients (r₃₃) of the poled polymer films were in the range 10–12 pm V^?1 at 633 nm, which are acceptable for NLO device applications. © 2002 Society of Chemical Industry     

Synthesis and optical properties of a crosslinkable polymer system containing tricyanofuran‐based chromophores with excellent electro‐optic activity and thermal stability

Crosslinkable polymers with side‐chain systems were investigated in order to increase the content of nonlinear optical chromophores and improve the stability of oriented chromophores. A series of crosslinkable copolymers having varying concentrations of chromophores with tricyanofuran as an acceptor were successfully synthesized and characterized. The crosslinked electro‐optic (EO) polymers revealed the highest EO coefficient (r₃₃) of 47.0 pm V^?1 at 1310 nm, which was similar to r₃₃ of uncrosslinked systems. Compared to the uncrosslinked EO polymer systems, the crosslinked ones exhibited significantly enhanced temporal stability. The results of the EO coefficients and thermal properties indicated that the crosslinking effectively improved the stability and did not influence the r₃₃ values. Copyright © 2012 Society of Chemical Industry     

Synthesis and electro‐optical properties of novel Y‐type polyurethanes containing dioxynitrostilbene

3,4‐Di‐(2′‐hydroxyethoxy)‐4′‐nitrostilbene (2) was prepared by the reaction of 2‐iodoethanol with 3,4‐dihydroxy‐4′‐nitrostilbene. Diol 2 was condensed with 2,4‐toluenediisocyanate, 3,3′‐dimethoxy‐4,4′‐biphenylenediisocyanate and 1,6‐hexamethylenediisocyanate to yield novel Y‐type polyurethanes 3–5 containing dioxynitrostilbene as a non‐linear optical (NLO)‐chromophore. Polymers 3–5 were soluble in common organic solvents, such as acetone and DMF. These polymers showed thermal stability up to 280 °C in TGA thermograms with T_g values in the range of 100–143 °C in DSC thermograms. The approximate lengths of aligned NLO‐chromophores of the polymers estimated from AFM images were around 2 nm. The SHG coefficients (d₃₃) of poled polymer films were around 4.5 × 10^?8 esu. Poled polymer films had improved temporal and long‐term thermal stability owing to the hydrogen bonding of urethane linkage and the main‐chain character of the polymer structure, which are acceptable for NLO device applications. Copyright © 2004 Society of Chemical Industry     

Synthesis and characterization of poly(ethylene oxide)‐based glycopolymers and their biocompatibility with osteoblast cells

Poly(ethylene oxide)‐block‐poly(methacryl‐d ‐glucopyranoside) (PEO‐GP) and poly(methacryl‐d ‐glucopyranoside) (H‐GP) glycopolymers were synthesized by deacetylation of acetylated polymers which were synthesized via atom transfer radical polymerization. The synthesized glycopolymers were characterized using ¹H NMR, ¹³C NMR and Fourier transform infrared (FTIR) spectroscopies, gel permeation chromatography (GPC), thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC). The deacetylated polymers exhibited onset decomposition temperatures about 60 °C lower compared to the polymers having acetyl pendants. The glass transition temperature (T_g) of the acetylated homopolymer was 133 °C and that of the PEO‐based block copolymer was 124 °C. The deacetylated polymers H‐GP and PEO‐GP exhibited T_g values of about ?30 °C. Biocompatibility of the H‐GP and PEO‐GP glycopolymers was obtained by studying osteoblast cell adhesion, viability and proliferation in vitro. The cell viability showed an increase with increasing concentration of H‐GP from 0.1 to 1 µmol L^?1 and then decreased with further increase in its concentration (10–1000 µmol L^?1). PEO‐GP did not show a significant variation in cell viability on variation of its concentration from 0.1 to 1000 µmol L^?1. The significant improvement in biocompatibility with osteoblast cells in the presence of PEO‐GP was considered as due to the covalently bonded PEO segment of the methacrylate glycopolymer block. © 2014 Society of Chemical Industry     

High‐optical transparency and low‐dielectric constant of new organosoluble polyamides containing trifluoromethyl and xanthene groups

A series of fluorinated polyamides was prepared directly by low‐temperature polycondensation of a new cardo diacid chloride, 9,9‐bis[4‐(4‐chloroformylphenoxy)phenyl]xanthene (BCPX), with various diamines containing trifluoromethyl substituents in N,N‐dimethylacetamide (DMAc). Almost all polyamides showed excellent solubility in amide‐type solvents such as DMAc and could also be dissolved in pyridine, m‐cresol, and tetrahydrofuran. These polymers had inherent viscosities between 0.77 and 1.31 dL g^?1, and their weight‐average molecular weights and number‐average molecular weights were in the range of 69,000–102,000 and 41,000–59,000, respectively. The resulting polymers showed glass transition temperatures between 240–258°C and 10% weight loss temperatures ranging from 484°C to 517°C and 410°C to 456°C in nitrogen and air, respectively, and char yields at 800°C in nitrogen higher than 55%. All polymers were amorphous and could be cast into transparent, light‐colored, and flexible films with tensile strengths of 81–100 MPa, elongations at break of 8–12%, and tensile modulus of 1.6–2.1 GPa. These polymers had low‐dielectric constants of 3.34–3.65 (100 kHz), low‐moisture absorption in the range of 0.76–1.91%, and high transparency with an ultraviolet–visible absorption cut‐off wavelength in the 322–340 nm range. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

New generation of thermally stable and conducting poly(azomethine‐ester)s: nano‐blend formation with polyaniline

A new dihydroxy monomer, (E)‐1‐(4‐(4‐(4‐hydroxybenzylidene)thiocarbamoylaminobenzyl)phenyl)‐3‐(4‐hydroxybenzylidene)thiourea, was synthesized and polymerized with thiophene‐2,5‐dicarbonyl/terephthaloyl chloride. The structural characterization of the resulting polymers was carried out using spectral techniques (Fourier transform infrared and ¹H NMR) along with a physical property investigation. Novel polyesters are readily soluble in various amide solvents and possess high molar mass of 112 × 10³–133 × 10³ g mol^?1. The thermal stability was determined via 10% weight loss to be in the range 519–523 °C and the glass transition temperature was 286–289 °C. Electrically conducting poly(azomethine‐ester)‐blend‐polyaniline blends were prepared using mash‐blending and melt‐blending techniques. Materials obtained using the conventional melt‐blending approach generated an efficient conductive network compared with those produced by mash blending. Field emission scanning electron microscopy revealed a nano‐blend morphology for the melt‐blended system owing to increased physical interactions (hydrogen bonding and π–π stacking) between the two constituent polymers. Miscible blends of thiophene‐based poly(azomethine‐ester)‐blend‐polyaniline had superior conductivity (1.6–2.5 S cm^?1) and thermal stability (T₁₀ = 507 °C) even at low polyaniline concentration relative to reported thiophene/azomethine/polyaniline‐based structures. The new thermally stable and conducting nano‐blends could be candidates for various applications including optoelectronic devices. © 2012 Society of Chemical Industry     

Thiophene‐ and silarylene‐containing polyesters. Resonance effect on conductivity after polarization in an external electric field

Polyesters were synthesized by direct polycondensation of thiophene‐2,5‐dicarboxylic acid and five different silarylene‐containing diphenols using a tosyl chloride/pyridine/N,N‐dimethylformamide system as a condensing agent. Polymers were obtained in good yields and were characterized using Fourier transform infrared and NMR (¹H, ¹³C, 135‐DEPT and ²⁹Si) spectroscopy and elemental analysis. All polymers were completely soluble in aprotic organic polar solvents such as dimethylformamide, dimethylsulfoxide and N‐methyl‐2‐pyrrolidone. The range of effective mass of the polymers (m/z) was 1 × 10⁵–2 × 10⁵, determined using electrospray ionization mass spectrometry. Asymmetry and steric hindrance prevented dense packing of the polymeric chains, showing glass transition temperatures between ? 78 and ? 51 °C and loss of thermal stability at 177–199 °C (10% weight loss). Additionally, the melting points of the polyesters were found to be in the range 62–67 °C. Because of this, the samples were semi‐solid at room temperature. The optical band gaps of the polymers were observed between 4.54 and 4.48 eV, corresponding in all cases to insulator behavior. The molecular structure of the samples was studied using X‐ray diffraction, showing a degree of order that was associated with two monoclinic lattices. Additionally, the conductivity was studied using a two‐point method with contacts on top of polymer films. Prior to the electrical measurement, the samples were polarized in an external electric field of 0.8 to 6.4 V cm^?1, and the alignment of the dipoles increased the electrical conductivity. Copyright © 2012 Society of Chemical Industry     

Synthesis and characterization of aromatic/cycloaliphatic poly(amide‐ imide‐imide)s from bis(4‐amino‐ 3,5‐dimethylphenyl) cycloalkane derivatives

A series of novel aromatic diamines containing cycloaliphatic moieties was synthesized by the reaction of cycloalkanones like cyclohexanone and cycloheptanone with 2,6‐dimethylaniline. The tetrimide diacid was synthesized using the prepared diamine with 3,3′,4,4′‐benzophenonetetracarboxylic acid dianhydride/pyromellitic dianhydride and p‐aminobenzoic acid. The polymers were prepared by treating the tetrimide diacid with different aromatic diamines. The structures of the monomers and polymers were identified using elemental analysis and Fourier transform infrared, ¹H NMR and ¹³C NMR spectroscopy. The polymers show excellent solubility. The polymers are amorphous and have high optical transparency. They also show good thermal stability and their T_g value is found to be in the range 268–305 °C. Copyright © 2007 Society of Chemical Industry     

Continuous lipase‐catalyzed synthesis of hexyl laurate in a packed‐bed reactor: optimization of the reaction conditions in a solvent‐free system

BACKGROUND: Hexyl laurate has been applied widely in cosmetic industries and is synthesized by chemical methods with problems of cost, environmental pollution, and by‐products. In this study, Lipozyme^® IM77 (from Rhizomucor miehei) was used to catalyze the direct‐esterification of hexanol and lauric acid in a solvent‐free system by utilizing a continuous packed‐bed reactor, wherein the aforementioned difficulties could be overcome. Response surface methodology (RSM) and three‐level‐three‐factor Box‐Behnken design were employed to evaluate the effects of synthesis parameters, such as reaction temperature (45–65 °C), mixture flow rate (0.25–0.75 mL min^?1) and concentration of lauric acid (100–300 mmol L^?1) on the production rate (µmol min^?1) of hexyl laurate by direct esterification. RESULTS: The production rate was affected significantly by the mixture flow rate and lauric acid concentration. On the basis of ridge‐max analysis, the optimum synthesis conditions for hexyl laurate were as follows: 81.58 ± 1.76 µmol min^?1 at 55 °C, 0.5 mL min^?1 flow rate and 0.3 mol L^?1 lauric acid. CONCLUSION: The lipase‐catalyzed synthesis of hexyl laurate by Lipozyme^® IM‐77 in a continuous packed‐bed bioreactor and solvent‐free system was successfully developed; optimization of the reaction parameters was obtained by Box–Behnken design and RSM. Copyright © 2008 Society of Chemical Industry     

Molecular design,synthesis, and electro‐optic properties of novel Y‐type polyesters with high thermal stability of second harmonic generation

3,4‐Di‐(2′‐hydroxyethoxy)‐4′‐nitrostilbene was prepared and condensed with terephthaloyl chloride, adipoyl chloride, and sebacoyl chloride to yield novel Y‐type polyesters containing NLO‐chromophore dioxynitrostilbenyl groups, which constituted parts of the polymer backbone. Polymers were found soluble in common organic solvents such as acetone and N,N‐dimethylformamide. They showed thermal stability up to 300 °C in thermogravimetric analysis with glass‐transition temperatures obtained from differential scanning calorimetry in the range 110–152 °C. The second harmonic generation (SHG) coefficients (d₃₃) of poled polymer films at a 1064 cm^?1 fundamental wavelength were around 3.51 × 10^?8 esu. The dipole alignment exhibited high thermal stability even at 10 °C higher than the glass‐transition temperature, and there was no SHG decay below 120 °C for one of these polymers due to the partial main‐chain character of polymer structure, which was acceptable for NLO device applications. Copyright © 2005 Society of Chemical Industry     

Evaluation and fabrication of pore‐size‐tuned silica membranes with tetraethoxydimethyl disiloxane for gas separation

Organic/inorganic hybrid silica membranes were prepared from 1,1,3,3‐tetraethoxy‐1,3‐dimethyl disiloxane (TEDMDS) by the sol‐gel technique with firing at 300–550°C in N₂. TEDMDS‐derived silica membranes showed high H₂ permeance (0.3–1.1 × 10^?6 mol m^?2 s^?1 Pa^?1) with low H₂/N₂ (～10) and high H₂/SF₆ (～1200) perm‐selectivity, confirming successful tuning of micropore sizes larger than TEOS‐derived silica membranes. TEDMDS‐derived silica membranes prepared at 550°C in N₂ increased gas permeances as well as pore sizes after air exposure at 450°C. TEDMDS had an advantage in tuning pore size by the “template” and “spacer” techniques, due to the pyrolysis of methyl groups in air and Si? O? Si bonding, respectively. For pore size evaluation of microporous membranes, normalized Knudsen‐based permeance, which was proposed based on the gas translation model and verified with permeance of zeolite membranes, reveals that pore sizes of TEDMDS membranes were successfully tuned in the range of 0.6–1.0 nm. © 2011 American Institute of Chemical Engineers AIChE J, 2011     

Synthesis and nonlinear optical properties of novel y‐type polyurethanes containing different concentrations of chromophore

A new series of Y‐type polyurethanes containing different concentrations of nonlinear optical (NLO) chromophore with aniline donor and tricyanofurane (TCF) acceptor have been successfully prepared, and characterized by FTIR, UV‐Vis, and ¹H‐NMR spectra. New polyurethanes were synthesized with different chromophore contents by introducing diol N, N‐dihydroxyethylaniline or 4‐[N, N‐(dihydroxyethyl)amino]benzaldehyde. These NLO polyurethanes exhibit good film forming property and high thermal stability up to 281°C. The highest electro‐optic coefficient (r₃₃) of polymers is up to 39 pm V^?1 measured by simple reflection technique at 1310 nm, and the temporal stability of the poling‐induced order at elevated temperature of 80°C was much improved through the introducing of hydrogen bonding interaction in this system. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Synthesis of novel poly(vinyl ether)s containing the oxybenzylidenemalononitrile group as a nonlinear optical chromophore,and their electro‐optic properties

2,4‐Di‐(2′,2′‐dicyanovinyl)‐1‐(2′‐vinyloxyethoxy)benzene and 2,4‐di‐(2′‐carbomethoxy‐2′‐cyanovinyl)‐1‐(2′‐vinyloxyethoxy)benzene were prepared by condensation of 4‐(2′‐vinyloxyethoxy)isophthaldehyde with malononitrile and methyl cyanoacetate, respectively. The two vinyl monomers were polymerized with boron trifluoride etherate as a cationic initiator to yield poly(vinyl ether)s containing two oxybenzylidenemalononitrile and oxybenzylidenecyanoacetate groups, which are effective chromophores for second‐order nonlinear optical applications. These polymers were soluble in common organic solvents such as acetone and dimethyl sulforide. They showed thermal stabilities up to 300 °C from thermogravimetric analysis (TGA), with differential scanning calorimeter (DSC) thermograms giving T_g values in the range 73–87 °C. The second harmonic generation (SHG) coefficients (d₃₃) of poled polymer films were around 1.8 × 10^?9 esu, and these polymers showed good long‐term thermal stability for 60 days at room temperature, which is acceptable for nonlinear optical (NLO) device applications. Copyright © 2004 Society of Chemical Industry     

Synthesis and electro‐optic properties of novel polyurethane containing the nitrophenylazoresorcinoxy group

A novel Y‐type polyurethane (polyurethane 3) containing 4‐(4‐nitrophenylazo)resorcinoxy groups as nonlinear optical (NLO) chromophores, which constitute part of the polymer backbone, was prepared and characterized. Polyurethane 3 is soluble in common organic solvents such as acetone and N,N‐dimethylformamide. It shows thermal stability up to 270 °C from thermogravimetric analysis with a glass transition temperature obtained from differential scanning calorimetry of 102 °C. The second harmonic generation (SHG) coefficient (d₃₃) of the poled polymer film at 1064 nm fundamental wavelength is 2.06 pm V^?1. Polymer 3 exhibits thermal stability up to T_g, and no significant SHG decay is observed below 100 °C, which is acceptable for nonlinear optical device applications. Copyright © 2012 Society of Chemical Industry     

Synthesis and characterization of photo‐crosslinkable polyfluorene with acrylate side‐chains

A photo‐crosslinkable polymer, poly[2,7‐(9,9‐dioctylfluorene)‐co‐2,7‐(9‐hexyl‐9‐(2‐acrylate ethyl)‐9H‐fluorene)] (P3), was synthesized and the photo‐crosslinkable acrylate groups were introduced into the side‐chains of the polyfluorene derivative after its polymerization. This method avoids the possible crosslinkage of the crosslinkable groups on the monomers during polymerization in the traditional synthesis route by the polymerization of the monomers with the crosslinkable side‐chains. The soluble and processable polymer P3 could be crosslinked via the acrylate groups in its side‐chains upon exposure to UV light in nitrogen atmosphere. The crosslinking was confirmed by IR spectroscopy: the IR peak of C?C bond at 1635 cm^?1 decreased and that of the vinyl C? H bond at 742 cm^?1 disappeared after the UV exposure. The absorption spectra of P3 remain unchanged after crosslinking, but a longer wavelength emission at 517 nm appeared in the photoluminescent and electroluminescent spectra of the crosslinked P3, which could be attributed to the formation of keto defects during the photo crosslinking. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 2336–2342, 2006     

Examining the preparation and characterization of coatings based on linear aromatic terpoly(methoxy‐cyanurate‐thiocyanurate)s

Two series of terpoly(methoxy‐cyanurate‐thiocyanurate)s based on thiodiphenol and dithiodiphenyl sulfide and on dihydroxydiphenyl ether and dithiodiphenyl ether, were prepared in good yield and purity and fully characterized. Most of the resulting polymers, formed at room temperature using phase transfer catalysis, can be cast into films with good resilience and thermal stability (some examples suffer practically no mass loss when held isothermally at 190 °C and only display appreciable losses when held continuously at 225 °C). Char yields of 53%?61% are achieved in nitrogen depending on backbone structure. Some problems were encountered with solubility, particularly with copolymers, which limited molecular weight analysis, but values of M_n = 8000–13 000 g mol^?1 were obtained for the polymers based on thiodiphenol and dithiodiphenyl sulfide, and M_n = 5000–13 000 g mol^?1 for the polymers based on dihydroxydiphenyl ether and dithiodiphenyl ether. DSC reveals polymerization exotherms with maxima at 184–207 °C (ΔH_p = 43–59 kJ mol^?1), which are believed to be due to isomerization of the cyanurate to the isocyanurate (activation energies span 159–195 kJ mol^?1). Molecular simulation shows that diphenylether and diphenylsulfide display very similar conformational energy surfaces and would therefore be expected to adopt similar conformations, but the diphenylsulfide offers less resistance to deformations that increase the proximity of the two phenyl rings and results in more resilient films. © 2013 Society of Chemical Industry     

Ethynedithiol‐based polyeneoligosulfides as active cathode materials for lithium‐sulfur batteries

Ethynedithiol‐based polyeneoligosulfides have been synthesized in 96% yield by the reaction of sodium acetylides (HC?CNa, NaC?CSNa) and elemental sulfur through the Na? C_sp bond in liquid ammonia with the following spontaneous polymerization of ethynedithiols (HSC?CSH) formed by the hydrolysis. The polyeneoligosulfides synthesized are brown powders (up to 77% sulfur content, mp 128–184°C), partially soluble in organic solvents. They are high‐resistance semiconductors (10^?13 to 10^?14 S cm^?1), possess paramagnetic (10¹⁷ to 10¹⁸ spin g^?1) and redox properties. The oligosulfides obtained, being redox systems capable of reversible redox processes, provide high values of discharge capacity (345–720 mA h g^?1) of rechargeable lithium‐sulfur batteries. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Novel anion‐exchange organic‐inorganic hybrid membranes prepared through sol‐gel reaction and UV/thermal curing

Anion‐exchange organic‐inorganic hybrid membranes were prepared through sol‐gel reaction and UV/thermal curing of positively charged alkoxysilane and the alkoxysilane containing acrylate or epoxy groups. Properties of prepared hybrid membranes were varied by control of the molar ratio of the precursors. It was shown that the thermal degradation temperatures (T_d) of the membranes were in the range of 212–226°C, water uptakes in the range of 9.6–14.6% and IEC values in the range of 0.9–1.6 mmol g^?1. The hybrid membranes show high permeability to anions, as reflected by the high static transport number (t_?) of the anion (Cl^?). © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2008