Influence of the oxidation state of phosphorus on the decomposition and fire behaviour of flame-retarded epoxy resin composites

A systematic and comparative evaluation of the pyrolysis of halogen-free flame-retarded epoxy resins containing phosphine oxide, phosphinate, phosphonate, and phosphate (phosphorus contents around 2.6 wt.%) and the fire behaviour of their carbon fibre composites is presented. Decomposition pathways are proposed based on the thermal analysis (TG), TG coupled with evolved gas analysis (TG-FTIR), kinetics and analysis of the residue with FTIR and XPS. All organophosphorus-modified hardeners containing phenoxy groups lead to a reduced decomposition temperature and mass loss step for the main decomposition of the cured epoxy resin. With increasing oxidation state of the phosphorus the thermally stable residue increases, whereas the release of phosphorus-containing volatiles decreases. The flammability of the composites was investigated with LOI and UL 94 and the fire behaviour for forced-flaming conditions with cone calorimeter tests performed using different irradiations. The flame retardancy mechanisms are discussed. With increasing oxidation state of the phosphorus additional charring is observed, whereas the flame inhibition, which plays the more important role for the performance of the composites, decreases. The processing and the mechanical performance (delamination resistance, flexural properties and interlaminar bonding strength) of the fibre-reinforced composites containing phosphorus were maintained at a high level and, in some cases, even improved. The potential for optimising flame retardancy while maintaining mechanical properties is highlighted in this study.     

Synthesis of curing agent for epoxy resin based on halogenophosphazene

Epoxy resins are, due to their excellent properties (such as chemical resistance, dimensional stability, and heat resistence), widely used in practice. The basic principle of curing epoxy resins with a hardener containing multiple amino groups is the crosslinking reaction between active hydrogen atoms in the hardener and the oxirane groups in the epoxy resin. This study deals with the synthesis and characterization of hexachloro‐cyclo‐triphosphazene derivative and its subsequent use for curing epoxy resins. The new hardener was prepared from hexachloro‐cyclo‐triphosphazene by nucleophilic substitution with isophorone diamine and its curing capability was compared with original isophorone diamine. The prepared derivative hexaisophorone diamino‐cyclo‐triphosphazene (HICTP) provided advantages over conventional curing system, as it improved mechanical properties as well as the flame resistance. Testing of the cured epoxy resin during burning was carried out using dual cone calorimeter, which enables more extensive monitoring of parameters in comparison with testing using oxygen index that has been used in many publications. The epoxy resin cured with the prepared phosphorus containing HICTP exhibits lower values for total heat release, amount of smoke released and oxygen consumed, which may cause a slower flame spread. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 42917.     

Green synthesis and characterization of phosphorus flame retardant crosslinking agents for epoxy resins

The flame‐retardant efficacy of phosphorus‐containing reactive amine hardeners for epoxy resins is well‐known; however their synthesis often applies hazardous, objectionable reagents. The aim of this work is to develop an effective synthesis method for the preparation of P‐containing amines, which can act as flame‐retardant crosslinking agent in epoxy resins. The syntheses and testing of an aliphatic and two aromatic amines are described: curing properties, glass transition temperature, thermal stability, and flame‐retardant performance of the amines are studied. On the basis of these results, the scaling‐up and the optimization of the synthesis of the phosphorus‐containing aliphatic amine hardener in ReactIR? in situ FTIR apparatus is discussed. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40105.     

Phosphorus‐containing epoxy resin for an electronic application

A phosphorus‐containing epoxy resin, 6‐H‐dibenz[c,e][1,2] oxaphosphorin‐6‐[2,5‐bis(oxiranylmethoxy)phenyl]‐6‐oxide (DOPO epoxy resin), was synthesized and cured with phenolic novolac (Ph Nov), 4,4′‐diaminodiphenylsulfone (DDS), or dicyandiamide (DICY). The reactivity of these three curing agents toward DOPO epoxy resin was found in the order of DICY > DDS > Ph Nov. Thermal stability and the weight loss behavior of the cured polymers were studied by TGA. The phosphorus‐containing epoxy resin showed lower weight loss temperature and higher char yield than that of bisphenol‐A based epoxy resin. The high char yields and limiting oxygen index (LOI) values as well as excellent UL‐94 vertical burn test results of DOPO epoxy resin indicated the flame‐retardant effectiveness of phosphorus‐containing epoxy resins. The DOPO epoxy resin was investigated as a reactive flame‐retardant additive in an electronic encapsulation application. Owing to the rigid structure of DOPO and the pendant P group, the resulting phosphorus‐containing encapsulant exhibited better flame retardancy, higher glass transition temperature, and thermal stability than the regular encapsulant containing a brominated epoxy resin. High LOI value and UL‐94 V‐0 rating could be achieved with a phosphorus content of as low as 1.03% (comparable to bromine content of 7.24%) in the cured epoxy, and no fume and toxic gas emission were observed. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 73: 353–361, 1999     

Synthesis and properties of phosphorus‐containing advanced epoxy resins. II

Two phosphorus‐containing diacids were synthesized from 9,10‐dihydro‐9‐oxa‐10‐phosphaphenanthrene 10‐oxide (DOPO) and either maleic acid or itaconic acid and then reacted with diglycidyl ether of bisphenol A (DGEBA) to form two series of advanced epoxy resins. Reaction conditions, such as reaction time, temperature and catalyst, are discussed in this article. After curing with 4,4'‐diaminodiphenyl sulfone (DDS), thermal properties of cured epoxy resins were studied using dynamic mechanical analysis (DMA) and thermal gravimetric analysis (TGA). The flame retardancy of cured epoxy resins was evaluated using a UL‐94 measurement. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 78: 228–235, 2000     

Flame retardant epoxy resin for electrical and electronic applications

Amine‐cured epoxy resins were prepared at 2% by weight phosphorus content using four halogen‐free flame retardants; poly(m‐phenylene methyl phosphonate) (Fyrol PMP); 9,10‐dihydro‐9‐oxa‐10‐phosphaphenanthrene‐10‐oxide; red phosphorus; and aluminum diethylphosphinate (OP1230). The effect of these additives on the properties of cured epoxy, including glass transition temperature, thermal stability, and fire retardancy (cone calorimetry), were studied and were compared with the conventionally used flame retardant, tetrabromobisphenol‐A (TBBA). All properties are improved for the non‐halogenated materials compared with TBBA. Further, the stoichiometric amounts of Fyrol PMP and TBBA (without an external curing agent) were reacted with epoxy to determine if they could be used as a flame retardant and as a curing agent; Fyrol PMP effectively acts as a flame retardant and as a curing agent. Evolved gas analysis is also discussed through thermogravimetric analysis/Fourier transform infrared spectroscopy. Copyright © 2013 John Wiley & Sons, Ltd.     

Synthesis and properties of phosphorus containing advanced epoxy resins

A series of advanced epoxy resins with various epoxy equivalent weights were synthesized from a reactive phosphorus‐containing diol, 2‐(6‐oxido‐6H‐dibenz[c,e][1,2]oxaphosphorin‐6‐yl)‐1,4‐dihydroxy phenylene and diglycidyl ether of bisphenol A and then cured with 4,4′‐diaminodiphenyl sulfone, phenol novolac, or dicyandiamide. The parameters of the polymerization reaction (such as reaction time, catalyst) are discussed in this article. Thermal properties of cured epoxy resins were studied using differential scanning calorimetry, dynamic mechanical analysis, and thermal gravimetric analysis. The flame retardancy of cured epoxy resins was tested by limiting oxygen index. The relations between thermal properties, flame retardancy, and epoxy equivalent weights were also studied. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 75: 429–436, 2000     

Blended hybrids based on silsesquioxane–OH and epoxy resins

Blended hybrids based on silsesquioxane cyclohexyl trisilanol [STOH; i.e., (c‐C₆H₁₁)₇Si₇O₉(OH)₃] and epoxy resin 4,5‐epoxyhexyl‐1,2‐dimethyl acid diglycidyl ester (TDE‐85) were prepared with good compatibility of STOH up to 5 wt % with TDE‐85. The blended hybrid resins, with various STOH additions, were cured by 4,4′‐diaminodiphenylsulfone, and the curing reactions were investigated with differential scanning calorimetry. The incorporation of STOH increased the curing reaction of TDE‐85 for three active hydrogens existing in the STOH molecule. The storage moduli and glass‐transition temperatures of the cured hybrid resins were studied with dynamic mechanical analysis. The cured hybrids had higher storage moduli than the pure epoxy resins at lower temperatures and increased slightly even when the temperature was above the glass‐transition temperature. Two peaks appearing in tan δ curves indicated the block copolymer structure and two different glass‐transition temperatures of the cured hybrid resins. The thermal stability and flame retardancy of the cured hybrid resins were investigated with thermogravimetric analysis and limited oxygen index values, respectively. The results showed that introducing silsesquioxane–OH units into epoxy resins could improve the thermal stability and flame retardancy of the resins. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2007     

Flame retardancy and dielectric properties of dicyclopentadiene‐based benzoxazine cured with a phosphorus‐containing phenolic resin

A dicyclopentadiene‐based benzoxazine (DCPDBZ) was prepared and separately copolymerized with melamine–phenol formaldehyde novolac or phosphorus‐containing phenolic resin (phosphorus‐containing diphenol) at various molar ratios. Their curing behaviors were characterized by differential scanning calorimetry. The electrical properties of the cured resins were studied with a dielectric analyzer. The glass‐transition temperatures were measured by dynamic mechanical analysis. The thermal stability and flame retardancy were determined by thermogravimetric analysis and a UL‐94 vertical test. These data were compared with those of bisphenol A benzoxazine and 4,4′‐biphenol benzoxazine systems. The effects of the diphenol structure and cured composition on the dielectric properties, moisture resistance, glass‐transition temperature, thermal stability, and flame retardancy are discussed. The DCPDBZ copolymerized with phosphorus‐containing novolac exhibited better dielectric properties, moisture resistance, and flame retardancy than those of the melamine‐modified system. The flame retardancy of the cured benzoxazine/phosphorus‐containing phenolic resins increased with increasing phosphorus content. The results indicate that the bisphenol A and 4,4′‐biphenol systems with a phosphorus content of about 0.6% and the dicyclopentadiene system with a phosphorus content of about 0.8% could achieve a flame‐retardancy rating of UL‐94 V‐0. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Synthesis and properties of a phosphate ester as curing agent in an epoxy resin system

Phosphate ester compounds display good flame retardancy effect in epoxy resin systems. In this paper, several novel phosphate esters, used as curing agents for epoxy resins, were synthesized based on P₂O₅, phosphoric acid, and different types of alcohol. The structures of phosphate esters were characterized by ³¹P nuclear magnetic resonance (³¹P NMR). Then, a series of flame retardant epoxy composites were prepared by curing the epoxy resins (E-44) with the phosphate esters. The flame retardancy and thermal degradation behaviors of flame retardant epoxy composites were investigated by cone calorimeter test (CCT) and thermogravimetric analysis (TGA), respectively. The results of CCT indicated that phosphate esters can significantly decrease heat release rate, total heat release (THR), and smoke production rate. The sample cured by butyl phosphate ester from phosphorus pentoxide, phosphoric acid and butanol showed the best flame retardant performance among all samples. The TGA results showed that phosphate esters could enhance char residues of flame retardant epoxy composites when compared with those of a composite using T31 as a curing agent at high temperature. It may be concluded that good flame retardant properties of flame retardant epoxy composites are related to the formation of a protective phosphorus-rich char layer. These phosphate esters have a good future on flame retardant epoxy composites.     

Synthesis and characterization of epoxy film cured with phosphorous‐containing phenolic resin

Through the electrophilic addition reaction of ? P(O)? H and C?C, a series of novel phosphorus‐containing phenolic resins bearing maleimide (P‐PMFs) were synthesized and used as curing agent for preparing high performance and flame retardancy epoxy resins. The structure of the resin was confirmed with FTIR and elemental analysis. Thermal properties and thermal degradation behaviors of the thermosetted resin was investigated by using differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA). The epoxy resins exhibited high glass transition temperature (143–156°C), goof thermal stability (>330°C) and retardation on thermal degradation rates. High char yields (700°C, 52.9%) and high limited oxygen indices (30.6–34.8) were observed, indicating the resins' good flame retardance for the P‐PMFs/CNE cured resins. The developed resin may be used potentially as environmentally preferable products in electronic fields. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 3813–3817, 2007     

Improving thermal and flame‐retardant properties of epoxy resins by a novel reactive phosphorous‐containing curing agent

In an attempt to improve thermal and flame‐retardant properties of epoxy resins efficiently, a new reactive phosphorus‐containing curing agent called 9,10‐dihydro‐9‐oxa‐10‐phosphaphenanthrene‐10‐yl‐(phenylimino)‐(4‐hydroxyphenyl)me‐thane (DOPO‐PHM) was synthesized and was combined with 4,4′‐diaminodiphenyl methane (DDM) to co‐cure epoxy resins (E51), which covalently incorporated halogen‐free DOPO organ groups into the epoxy networks. The chemical structure of this curing agent was confirmed by FTIR, 1D, and 2D NMR spectra. A reaction mechanism during the preparation was proposed, and the electron effect on the stabilization of the carbocation was discussed. Various DDM/DOPO‐PHM molar ratios were used to get the materials with different phosphorus contents. Their dynamic mechanical, thermal, and flame‐retardant properties were evaluated by dynamic mechanical thermal analysis, thermogravimetric analysis, and limiting oxygen index (LOI) respectively. All samples had a single T_g, showing that these epoxy resins were homogeneous phase for long‐term use in spite of adding DOPO‐PHM. Both char yields (under nitrogen and air atmospheres) increased with the increasing of phosphorus content and the LOI values increased from 24.5 for standard resin to 33.5 for phosphorus‐containing resins, indicating the significant enhancement of thermal stability and flame retardancy. POLYM. ENG. SCI., 54:1192–1200, 2014. © 2013 Society of Plastics Engineers     

含磷本质阻燃环氧树脂的研究进展

综述了含磷本质阻燃环氧树脂(包括含磷协同本质阻燃体系)的发展、现状和未来趋势。与添加型阻燃剂阻燃环氧树脂相比,通过含磷环氧化合物和/或含磷固化剂把磷元素嵌入环氧树脂结构中制得的含磷本质阻燃环氧树脂,具有阻燃效率高、阻燃持久、物理力学性能不受影响、燃烧过程中毒性腐蚀性挥发物质的生成量低等优势。利用协同阻燃效应,可以进一步提高阻燃性能。但是,含磷本质阻燃环氧树脂和含磷协同本质阻燃体系存在制备工艺复杂、生产成本较高等不足。     

Phenol novolac/poly(4- hydroxyphenylmaleimide) blend hardeners for DGEBA-type epoxy resin

Phenol novolac/poly (4-hydroxyphenylmaleimide) (PHPMI) blends were used as an epoxy resin hardener. The curing behavior of the above system and the thermal and mechanical properties of the cured epoxy resin were studied. It was not necessary to use a curing accelerator for this system, because PHPMI caused acceleration of the curing reaction. The curing mechanism of this system was investigated by using model compounds. Test pieces from the neat resins and the glass fiber reinforced resins were evaluated in terms of thermal and mechanical properties, respectively. It was found that heat resistance and mechanical properties were improved by increasing the amount of PHPMI in the hardener.     

Synthesis and properties of flame‐retardant epoxy resins based on DOPO and one of its analog DPPO

Two phosphorus‐containing heterocyclic flame retardants ‐9,10‐dihydro‐9‐oxa‐10‐phosphaphenanthrene‐10‐oxide (DOPO) and 2,8‐dimethyl‐phenoxaphosphin‐10‐oxide (DPPO) ‐ and their derivatives were characterized and incorporated in the backbone of epoxy novolac to obtain flame‐retardant epoxy resins. The structures and spectroscopic data including high‐resolution mass spectroscopy of these flame retardants were determined. Flame‐retardant epoxy resins with a phosphorus content of up to 2% based on heterocyclic DOPO and DPPO were cured with 4,4′‐diaminodiphenylmethane (DDM), and their features were examined by UL 94, LOI, and DSC. In this manner, high‐performance polymers with glass transition temperatures around 190°C and the UL 94 rating V0 were obtained. These polymers were compared with epoxy resins incorporating diphenyl phosphite and diphenyl phosphate, which are nonheterocyclic and do not pass the UL 94 test up to 2% phosphorus. DPPO has a similar flame retardancy like the commercially available DOPO. Furthermore, to explain the difference in the efficiency of the tested flame retardants, key experiments for the determination of the active species during the flame‐retarding process were performed and the PO radical was identified. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2007.     

Curing of epoxidized linseed oil: Investigation of the curing reaction with different hardener types

The effect of the hardener type and amount on the curing reaction and the resulting thermal and mechanical performance characteristics of epoxidized linseed oil are studied in detail. The analysis of the curing mechanism reveals that due to steric hindrance, side reactions and/or fast gelation, the optimal mixing ratio of bio-based epoxy resins and hardeners has to be determined experimentally and cannot be calculated. The investigated thermosets exhibit a glass transition temperature of 12, 54, and 145°C after curing. The overall mechanical performance of the resulting resin ranges from soft and flexible to stiff and rigid, depending on the hardener type applied, which can be utilized in the formation of epoxy composites and coatings.     

A phosphorus‐containing diamine for flame‐retardant,high‐functionality epoxy resins. I. Synthesis,reactivity, and thermal degradation properties

A phosphorus‐containing amine, bis(4‐aminophenoxy)phenyl phosphine oxide (BAPP), suitable for curing epoxy resins with improved fire performance was synthesized and characterized with Fourier transform infrared spectroscopy and nuclear magnetic resonance. The reactivity of the amino group was evaluated by differential scanning calorimetry of the epoxy–amine mixture and by proton nuclear magnetic resonance of the amino unit. With BAPP as a curing agent, a range of high‐functionality, aerospace epoxy resins were cured, and the dynamic kinetic parameters calculated from Kissinger's and Ozawa's models were compared with those from the more widely used amines. The thermal degradation properties of the phosphorus‐containing epoxy resins were studied by thermogravimetric analysis, the degradation activation energy was calculated, and a multistep thermal degradation process was observed. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 2093–2100, 2004     

Pyrolysis of epoxy resins and fire behavior of epoxy resin composites flame‐retarded with 9,10‐dihydro‐9‐oxa‐10‐phosphaphenanthrene‐10‐oxide additives

The pyrolysis of an epoxy resin and the fire behavior of corresponding carbon fiber‐reinforced composites, both flame‐retarded with either 10‐ethyl‐9,10‐dihydro‐9‐oxa‐10‐phosphaphenanthrene 10‐oxide or 1,3,5‐tris[2‐(9,10‐dihydro‐9‐oxa‐10‐phosphaphenanthrene 10‐oxide‐10‐)ethyl]1, 3,5‐triazine‐2,4,6(1H,3H,5H)‐trione, are investigated. The different fire retardancy mechanisms are discussed, and their influence on the fire properties assessed, in particular for flammability (limiting oxygen index, UL 94) and developing fires (cone calorimeter with different external heat fluxes of 35, 50, and 70 kW m^?2). Adding the flame retardants containing 9,10‐dihydro‐9‐oxa‐10‐phosphaphenanthrene‐10‐oxide affects the fire behavior by both condensed phase and gas phase mechanisms. Interactions between the additives and the epoxy resin result in a change in the decomposition pathways and an increased char formation. The release of phosphorous products results in significant flame inhibition. The fire properties achieved are thus interesting with respect to industrial exploration. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 2260–2269, 2007     

Preparation of ferric phosphonate/phosphinate and their special action on flame retardancy of epoxy resin

Fe‐ and P‐based compounds have demonstrated promising performance in enhancing flame retardancy of epoxy resins. In this context, this work focuses on the preparation of new Fe/P hybridized nanomaterials and their effect on flame retardancy of epoxy resins. The Fe/P hybrids were facilely prepared via forming ferric phosphinates and phosphonates using hydrothermal reaction. Attractively, ferric phosphinates and phosphonates exhibit the morphology of 1D nanorod and 2D nanosheet, respectively. When incorporating these two fillers in epoxy resin, the limiting oxygen index values of composites were enhanced to above 28 and the composites exhibited self‐extinguishing behavior, thus indicating greatly improved fire resistance. Further investigation revealed that the flame retarding behavior, in particular for ferric phosphonate nanosheets, took place mainly in gas phases via delaying the release of flammable gas. Attractively, it was found that the Fe/P hybrids took part into the pyrolysis reaction of epoxy resins through forming Fe? O and P? O bonds. This finding may provide a new insight to design a series of high performance flame retardants for epoxy resins. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46206.