Luminescence properties and energy transfer of GdAl3(BO3)4:Ce3+, Tb3+ phosphor

Ce³⁺ and Tb³⁺ singly doped and co-doped GdAl₃(BO₃)₄ phosphors were synthesized by solid state reaction. The crystal structure, the luminescent properties, the lifetimes and the temperature-dependent luminescence characteristic of the phosphors were investigated. Through an effective energy transfer, the emission spectra of GdAl₃(BO₃)₄:Ce³⁺, Tb³⁺ phosphor contains both a broad band in the range of 330–400 nm originated from Ce³⁺ ions and a series of sharp peaks at 484, 541, 583, and 623 nm due to Tb³⁺ ions. The energy transfer from Ce³⁺ to Tb³⁺ in GdAl₃(BO₃)₄ host is demonstrated to be phonon assisted nonradiative energy transfer via a dipole–dipole interaction.     

Deep-red emission of Mn4+ and Cr3+ in (Li1−xAx)2MgTiO4 (A=Na and K) phosphor: Potential application as W-LED and compact spectrometer

Mn⁴⁺ doped and Mn⁴⁺/Cr³⁺ co-doped alkali metal titanate phosphors have been prepared by solid state reaction method. A part of Li⁺ ions in the Li₂MgTiO₄: Mn⁴⁺ are substituted with Na⁺ and K⁺ ions and consequently the intensity of Mn⁴⁺ emission at 678 nm is enhanced by 1.7 and 2.5 times, respectively. In the Mn⁴⁺/Cr³⁺ co-doped (Li_0.95K_0.05)₂MgTi_0.999O₄, both emission of Cr³⁺at 726 nm and emission of Mn⁴⁺ at 678 nm of Mn⁴⁺ are observed. It is interesting to find that the intensity ratio of 726–678 nm emissions in the Mn⁴⁺/Cr³⁺ phosphor continually increases with excitation wavelength increasing from 290 nm to 455 nm, which means that the intensity ratio in turn can be used to identify the excitation light wavelength. This refers a possible approach to design novel compact light-wavelength detector or spectrometer based on the phosphor. The mechanism of Na⁺ or K⁺ substitution induced luminescence enhancement in the Mn⁴⁺ phosphor and the competition between the Cr³⁺ and Mn⁴⁺ emissions in the Mn⁴⁺/Cr³⁺ co-doped has been discussed.     

Luminescence properties and energy transfer investigations of Sr2B2O5:Ce3+,Tb3+ phosphors

Ce³⁺ and Tb³⁺ co-doped Sr₂B₂O₅ phosphors were synthesized by the solid-state method. X-ray diffraction (XRD) was used to characterize the phase structure. The luminescent properties of Ce³⁺ and Tb³⁺ co-doped Sr₂B₂O₅ phosphors were investigated by using the photoluminescence emission, excitation spectra and reflectance spectra, respectively. The excitation spectra indicate that this phosphor can be effectively excited by near ultraviolet (n-UV) light of 317 nm. Under the excitation of 317 nm, Sr₂B₂O₅:Ce³⁺,Tb³⁺ phosphors exhibited blue emission corresponding to the f–d transition of Ce³⁺ ions and green emission bands corresponding to the f–f transition of Tb³⁺ ions, respectively. The Reflectance spectra of the Sr₂B₂O₅:Ce³⁺,Tb³⁺ phosphors are noted that combine with Ce³⁺ and Tb³⁺ ion absorptions. Effective energy transfer occurred from Ce³⁺ to Tb³⁺ in Sr₂B₂O₅ host due to the observed spectra overlap between the emission spectrum of Ce³⁺ ion and the excitation spectrum of Tb³⁺ ion. The energy transfer efficiency from Ce³⁺ ion to Tb³⁺ ion was also calculated to be 90%. The phosphor Sr₂B₂O₅:Ce³⁺,Tb³⁺ could be considered as one of double emission phosphor for n-UV excited white light emitting diodes.     

Influence of Ce3+ and Gd3+ co-doping on the structure and upconversion emission in hexagonal Ho3+ doped NaYbF4 phosphors

Hexagonal Ho³⁺ doped NaYbF₄ phosphors are synthesized via a hydrothermal method. The influence of Gd³⁺ and Ce³⁺ content on the phase structure and upconversion (UC) emission of NaYbF₄ phosphors is investigated by X-ray diffraction (XRD), transmission electron microscopy (TEM) and UC spectra. The results of XRD and TEM indicate that the solubility of Ce³⁺ in hexagonal NaYbF₄ is low due to the large difference of ionic radius between Ce³⁺ and Yb³⁺. With help of Gd³⁺ co-doping (15 mol%), pure hexagonal NaYbF₄ phosphors with high doping concentration of Ce³⁺ (15 mol%) and small crystal size are obtained. When excited by a 980 nm laser diode, Ho³⁺ doped hexagonal NaYb_0.85Gd_0.15F₄ phosphors exhibit strong green UC emission at 540 nm and weak red one at 646 nm. UC luminescence tuning from green emission to red emission is observed in hexagonal Ho³⁺ doped NaYb_0.85Gd_0.15F₄ phosphors by co-doping with Ce³⁺ ions. The UC luminescence tuning phenomenon is attributed to two resonant energy transfer processes of ⁵S₂/⁵F₄(Ho³⁺)+²F_5/2(Ce³⁺)→⁵F₅(Ho³⁺)+⁵F_7/2(Ce³⁺) and ⁵I₆(Ho³⁺)+²F_5/2(Ce³⁺)→⁵I₇(Ho³⁺⁾+⁵F_7/2(Ce³⁺) between Ho³⁺ and Ce³⁺, which suppress the green emission at 540 nm, while promote the red one at 646 nm.     

Luminescence properties of Eu2+ and Mn2+ doped Sr1.7Mg0.3SiO4 phosphors

Eu²⁺, Mn²⁺ doped Sr_1.7Mg_0.3SiO₄ phosphors were prepared by high temperature solid-state reaction method. Their luminescence properties were studied. The emission spectra of Eu²⁺ singly doped Sr_1.7Mg_0.3SiO₄ consist of a blue band (455 nm) and a green band (550 nm). The relative intensities of two emissions varied with Eu²⁺ concentration. Eu²⁺ and Mn²⁺ co-doped Sr_1.7Mg_0.3SiO₄ phosphors emit three color lights and present whitish color. The blue (455 nm) and green (550 nm) emissions are attributed to the transitions of Eu²⁺, while the red (670 nm) emission is originated from the transition of Mn²⁺ ion. The results indicate the energy transfer from Eu²⁺ to Mn²⁺. The mechanism of the energy transfer is resonance-type energy transfer due to the spectral overlap between the emission of Eu²⁺and the absorption of Mn²⁺.     

Characteristics of nano-sized ZnGa2O4 phosphor prepared by solution combustion method and solid state reaction method

ZnGa₂O₄ phosphors were prepared by both SCM (solution combustion method) and SSRM (solid state reaction method). The properties of the both ZnGa₂O₄ phosphors were investigated by TGA (Thermogravimetric analysis), SEM (scanning electron microscope), BET (Brunauer Emmett Teller), PL (photoluminescence) and XRD (X-ray diffraction). The particle size of SCM phosphor was about one-hundredth of SSRM phosphor. The PL intensity of SCM phosphor was about 1.5-fold higher than that of SSRM phosphor. The SCM phosphor was also tried to be doped with Mn²⁺ ions. The highest PL peak was observed with Mn²⁺ ions of 0.003 mol fraction. The peak was shifted from blue (470 nm) to green (513 nm) color. These results might be very useful for high efficiency phosphors for displays such as field emission displays and plasma display panels.     

Photoluminescence properties and energy transfer between activators at different crystallographic sites in Ce3+ doped Sr2MgAl22O36

In this paper, a series of Ce3+ doped Sr₂MgAl₂₂O₃₆ (SMA) phosphors have been prepared by high temperature solid-state reaction method. The phase structure of prepared samples was checked by the powder X-ray diffraction (XRD). The morphology of the samples was inspected using a field-emission scanning electron microscope (SEM). Under different UV radiation, this phosphor exhibits different emission bands due to the Ce³⁺ ions located at different lattice sites. The corresponding luminescence and energy transfer mechanisms have been proposed in detail. The phosphor exhibits different concentration quenching mechanisms because the Ce³⁺ ions substitute two different crystallographic sites in the host. Moreover, the temperature dependent emission properties of SMA:Ce³⁺ were conducted from 30 °C to 200 °C, as much as 72.96% of the room-temperature emission intensity is retained at 150 °C. The SMA:Ce³⁺ phosphor exhibits bright blue emission with CIE coordinates (x=0.16, y=0.12) under UV excitation. The results indicate that SMA:Ce³⁺ phosphor has great potential applications in UV-pumped light emitting diodes.     

Tunable single-phase white-light-emitting Ba2Mg(BO3)2:Ce3+, Na+, Tb3+, Eu2+ phosphor based on energy transfer

A series of white-light-emitting phosphors of single-phase Ba₂Mg(BO₃)₂:Ce³⁺, Na⁺, Tb³⁺, Eu²⁺ were synthesized by conventional solid-state reaction. The crystal structure of the host was characterized by X-ray diffraction and investigated by Rietveld refinement. Photoluminescence properties were studied in detail. The energy transfer from Ce³⁺ to Tb³⁺ in Ba₂Mg(BO₃)₂ host was investigated and demonstrated to be a resonant type via a quadrupole–quadrupole mechanism. White light with wavelength tunable was realized by coupling the emission bands peaking at 417, 543 and 626 nm attributed to Ce³⁺, Tb³⁺ and Eu²⁺, respectively. By properly tuning the relative composition of Ce³⁺(Na⁺)/Tb³⁺/Eu²⁺, optimized Commission Internationale de l׳Eclairage (CIE) chromaticity coordinates (0.363, 0.295), high color rendering index (CRI) 90 and low correlated color temperature (CCT) 3793 K were obtained from the phosphor of Ba_1.90Ce_0.04Na_0.04Eu_0.02Mg_0.94Tb_0.06(BO₃)₂ upon the excitation of 296 nm UV radiation. These results indicate that Ba₂Mg(BO₃)₂:Ce³⁺, Na⁺, Tb³⁺, Eu²⁺ phosphor has a potential application as an UV radiation down-converting phosphor in white-light-emitting diodes.     

Photoluminescence of (ZnO)X-Z(SiO2)Y:(MnO)Z green phosphors prepared by direct thermal synthesis: The effect of ZnO/SiO2 ratio and Mn2+ concentration on luminescence

Green light emitting Zn₂SiO₄:Mn²⁺ phosphors have been synthetised by the solid-state reaction in ambient atmosphere at 1300 °C for 2 h, with ZnO, SiO₂ and MnO₂ as the reagents. The ZnO/SiO₂ molar ratio varied from 2 to 0.5. The doping level was in a lower concentration range (0.01≤x≤0.05). The effect of both the Mn²⁺ concentration and ZnO/SiO₂ molar ratio on luminescence intensity and decay was investigated in detail. The microstructure and phase composition of prepared phosphors were characterised by scanning electron microscopy (SEM) and X-ray powder diffraction (XRD). XRD results indicate that the pure α-Zn₂SiO₄ phase with rhombohedral structure was obtained after heat treatment. The prepared phosphors exhibit a strong green emission centred at 525 nm from the ⁴T₁→⁶A₁ forbidden transition. The highest emission intensity was observed for phosphors with ZnO/SiO₂ molar ratio equal to 1.0, and the Mn²⁺ concentration x=0.03 (ZSMn3). The emission intensity of the ZSMn3 phosphor is comparable with the commercial Zn₂SiO₄:Mn²⁺ phosphor. The decay curves can be characterised by double exponential function. After fitting a fast component τ₁∼2 ms and a slow component τ₂∼10 ms were obtained. The decay times decrease significantly with increasing Mn²⁺ concentration. The decay time and luminescence mechanism depend on the excitation light wavelength. Temperature dependent luminescence of the ZSMn3 phosphor in the temperature range of 25–200 °C was studied.     

Crystal structure,energy transfer mechanism and tunable luminescence in Ce3+/Dy3+ co-activated Ca20Mg3Al26Si3O68 nanophosphors

Ce³⁺, Dy³⁺ and Ce³⁺/Dy³⁺ co-doped Ca₂₀Mg₃Al₂₆Si₃O₆₈ (CMAS) nanophosphors were synthesized via modified solution-combustion method. Sharp X-ray diffraction patterns confirmed the formation of pure crystalline phase of Ca₂₀Al₂₆Mg₃Si₃O₆₈ as an orthorhombic crystal system having space group Pmmn. The phase purity of as synthesized material has allowed reliable structural parameters to be obtained from the Rietveld analysis of its powder diffraction pattern. The Ce³⁺, Dy³⁺ and Ce³⁺/Dy³⁺ emission at different lattice sites in CMAS host has been identified and discussed. Under ultra-violet (UV) excitation, optical properties and the energy transfer mechanism from Ce³⁺ to Dy³⁺ in CMAS: Ce³⁺/Dy³⁺ nanophosphors have been elaborated by photoluminescence spectroscopy. Also, the effects of doping and sintering temperature on the structure of prepared CMAS host samples have been investigated in detail. The Ce³⁺/Dy³⁺ concentration quenching mechanism due to multipole–multipole interaction has been studied and the critical energy-transfer distance was calculated to be 7.8 Å. The band gap of the synthesized phosphors was calculated from diffuse reflectance spectra using the Kubelka–Munk function. A uniform layered structure network has been revealed in scanning electron microscopy images of the CMAS phosphor. Transmission electron microscopy results indicate nanocrystalline nature of synthesized phosphors. CMAS: 1 m% Ce³⁺ and CMAS: 0.5 m% Dy³⁺ nano-luminescent powders are promising candidate as a blue and blue–yellow emitting UV convertible phosphor for application in white light emitting diodes. By utilizing the energy transfer mechanism in present CMAS: Ce³⁺/Dy³⁺ nanophosphors, with an appropriate tuning of the activator content, these phosphors can exhibit great potential for white light emission, as single-emitting component phosphors in solid state lighting technology.     

A double-perovskite Sr2ZnWO6:Mn4+ deep red phosphor: Synthesis and luminescence properties

Novel double-perovskite Sr₂ZnWO₆:Mn⁴⁺(SZW:Mn⁴⁺) phosphor is synthesized by high-temperature solid-state reaction method in air. SZW:Mn⁴⁺ phosphor with excitation at 325 and 526 nm emits deep-red light, the chromaticity coordinate is (0.7315,0.2685), and the emission band peaking at ~702 nm within the range 640–760 nm is assigned to the ²E→⁴A₂ transition of Mn⁴⁺ ion. The influences of “Mn⁴⁺- ligand” bonding and crystal field strength to emission properties of Mn⁴⁺ ion are analyzed. The optimal Mn⁴⁺ ion concentration in SZW:Mn⁴⁺ phosphor is ~0.8 mol%. Lifetime of SZW:Mn⁴⁺ phosphor decreases from 554.77 to 401.35 μs with increasing Mn⁴⁺ ion concentration in the range of 0.2–1.0 mol%. The lifetime data and decay curves indicate that there is only a single type of Mn⁴⁺ ion luminescent center in SZW:Mn⁴⁺ phosphor. The luminous mechanism of SZW:Mn⁴⁺ phosphor is analyzed by Tanabe-Sugano energy level diagram of Mn⁴⁺ in the octahedron together with the simple energy level diagram. The experimental results are helpful to research the influences of the neighboring coordination environment around Mn⁴⁺ and host crystal structure to the luminescence properties of Mn⁴⁺ ion and to deeply understand other Mn⁴⁺-dopedmaterials.     

YBO3: Ce3+, Yb3+ based near-infrared quantum cutting phosphors: Synthesis and application to solar cells

Ce³⁺ and Yb³⁺ co-doped YBO₃ phosphors were facilely fabricated by a hydrothermal method. The investigations reveal that hexagonal YBO₃: Ce³⁺, Yb³⁺ nanoparticles aggregate to form cyclic structure after annealing at 900 °C. An efficient near-infrared (NIR) quantum cutting phenomenon involving the emission of two NIR photons (971 nm) for each ultraviolet (UV) photon (360 nm) absorbed is observed based on the cooperative energy transfer (CET) from Ce³⁺ to Yb³⁺ in YBO₃ with a CET efficiency of 41.9%. Moreover, YBO₃: Ce³⁺, Yb³⁺/SiO₂ films with anti-reflection and NIR quantum cutting abilities were prepared by dip-coating method. The as prepared composite films can convert UV photons into NIR photons between 950 nm and 1050 nm, which well matched with the spectral response of the silicon-based solar cell. The experimental results indicate that the photoelectric conversion efficiency of silicon solar cell can be effectively improved by assembling the YBO₃: Ce³⁺, Yb³⁺/SiO₂ bi-functional film, and the corresponding conversion efficiency is about 0.521% higher than the pure glass and 0.252% higher than the pure SiO₂ anti-reflection (AR) film. In a word, this work provides a simple strategy to develop optical films with AR and NIR quantum cutting abilities for solar energy conversion.     

Synthesis and photoluminescence properties of the high-brightness Eu3+-doped Sr3Y(PO4)3 red phosphors

A series of red-emitting phosphors Eu³⁺-doped Sr₃Y(PO₄)₃ have been successfully synthesized by conventional solid-state reaction, and its photoluminescence properties have been investigated. The excitation spectra reveal strong excitation bands at 392 nm, which match well with the popular emissions from near-UV light-emitting diode chips. The emission spectra of Sr₃Y(PO₄)₃:Eu³⁺ phosphors exhibit peaks associated with the ⁵D₀ → ⁷F_J (J = 0, 1, 2, 3, 4) transitions of Eu³⁺ and have dominating emission peak at 612 nm under 392 nm excitation. The integral intensity of the emission spectra of Sr₃Y_0.94(PO₄)₃:0.06Eu³⁺ phosphors excited at 392 nm is about 3.4 times higher than that of Y₂O₃:Eu³⁺ commercial red phosphor. The Commission Internationale de l’Eclairage chromaticity coordinates, the quantum efficiencies and decay times of the phosphors excited under 392 nm are also investigated. The experimental results indicate that the Eu³⁺-doped Sr₃Y(PO₄)₃ phosphors are promising red-emitting phosphors pumped by near-UV light.     

Near-UV light excited Eu3+, Tb3+, Bi3+ co-doped LaPO4 phosphors: Synthesis and enhancement of red emission for WLEDs

A series of single-phase Eu³⁺, Tb³⁺, Bi³⁺ co-doped LaPO₄ phosphors were synthesized by solid-state reaction at 800 °C. Crystal structures of the phosphors were investigated by X-ray diffraction (XRD). A monoclinic phase was confirmed. The excitation (PLE) and emission (PL) spectra showed that the phosphors could emit red light centered at 591 nm under the 392 nm excitation, which is in good agreement with the emission wavelength from near-ultraviolet (n-UV) LED chip (370–410 nm). The results of PLE and PL indicated that the co-doped Tb³⁺ and Bi³⁺could enhance emission of Eu³⁺ and the fluorescent intensities of the phosphors excited at 392 nm could reach to a maximum value when the doping molar concentration of Tb³⁺ and Bi³⁺ is about 2.0% and 2.0%, respectively. The co-doping Tb³⁺ and Bi³⁺ ions can strengthen the absorption of near UV region. They can also be efficient to sensitize the emission of Eu³⁺, indicating that the energy transfer occurs from Tb³⁺ and Bi³⁺ to Eu³⁺ ions. From further investigation it can be found that co-doping Tb³⁺ and Bi³⁺ ions can also induce excitation energy reassignment between ⁵D₀–⁷F₁ and ⁵D₀–⁷F₂ in these phosphors, and result in more energy assignment to ⁵D₀–⁷F₂ emission in LaPO₄:Eu³⁺, Tb³⁺, Bi³⁺. Our research results displayed that La_0.94PO₄:Eu³⁺_0.02, Tb³⁺_0.02, Bi³⁺_0.02 could be a new one and could provide a potential red-emitting phosphor for UV-based white LED.     

Synthesis,photoluminescence properties and energy transfer behavior of color-tunable fluorapatite phosphor Sr9Gd(PO4)5(SiO4)F2:Tb3+/Sm3+

Tb³⁺-Sm³⁺ co-doped Sr₉Gd(PO₄)₅(SiO₄)F₂ (SGPSF) phosphors were prepared through a solid-state reaction, and their luminescence properties as well as energy transfer mechanism have been investigated in detail. The SGPSF:Tb³⁺, Sm³⁺ phosphors system could be efficiently excited at wavelengths ranging from 200 to 500 nm, which is well matched with the spectra of near ultraviolet chips. The emission of SGPSF:Tb³⁺, Sm³⁺ phosphor covers the entire visible region with sharp peaks in the blue, green, and red regions. The emission color of SGPSF:Tb³⁺, Sm³⁺ could be adjusted from green (0.275, 0.378) to red (0.519, 0.295) by controlling the doping content of Sm³⁺/Tb³⁺.     

Influence of Al3+ on the cross relaxation process and electrical properties of Dy3+ activated Gd2O3 phosphor for white LED application

Gd₂O₃:Dy³⁺ Al³⁺ phosphors is synthesised by a wet-chemical method for various concentrations of Al³⁺ ion. X-ray diffraction, photoluminescence and impedance spectroscopy are used to understand the physio-chemical properties of the phosphors. The emission spectra of Dy³⁺ ion exhibit transition peaks centred at 572 nm (yellow), 486 nm (blue) and 669 nm (red). Energy transfer from Gd³⁺ to Dy³⁺ is also verified by exciting the phosphors at 274 nm. Some of the Dy³⁺ ions occupy both C₂ and S₆ site of Gd³⁺ ion in Gd₂O₃ matrix. It is also revealed that the enhancement of Dy³⁺ emission is strongly correlated to the surface morphology of the phosphors. Introducing Al³⁺ ions in Gd₂O₃:Dy³⁺ phosphor affect the emission properties of Dy³⁺ ions and its influence is explored at various concentration of Al³⁺ ions. The energy level diagram is presented to explain the cross-relaxation process among Dy³⁺ ions and the energy transfer from Gd³⁺ to Dy³⁺ ion.     

A novel rare-earth free red long-persistent phosphor: Mg2GeO4:Mn4+

Red-emitting long-persistent phosphor Mg₂GeO₄: Mn⁴⁺ was prepared by a high-temperature solid-state reaction. The photoluminescence and afterglow properties of Mg₂GeO₄: xMn⁴⁺ phosphors were studied systematically. Furthermore, to improve the afterglow performance, co-doped Re³⁺ (Re = Pr, Er, Nd and Yb) ions into Mg₂GeO₄: 0.001Mn⁴⁺ separately to adjust the trap depth or increase the trap density was performed. The duration of Mg₂GeO₄: 0.001Mn⁴⁺ can be observed 30 min by naked eyes, and the initial brightness and afterglow duration are significantly improved after Re³⁺ ions are doped respectively. Especially, the afterglow emission of Mg₂GeO₄: Mn⁴⁺, Yb³⁺ can last for 2 h. This investigation shows up a rare Mn⁴⁺-doped long-afterglow phenomenon, and provides a new and efficient red afterglow material for potential application.     

Improvement of photoluminescence properties of Ce3+- doped CaSrAl2SiO7 phosphors by charge compensation with Li+ and Na+

In this work, we prepared CaSr_1-xAl₂SiO₇:xCe³⁺ (0.03 ≤ x ≤ 0.12) and CaSr_0.94Al₂SiO₇:0.03Ce³⁺,0.03 M⁺ (M⁺ = Li⁺ and Na⁺) phosphors via solid-state reaction method. Structural and photoluminescence (PL) properties of the phosphors were also investigated. The prepared phosphors formed an orthorhombic crystal structure with the P2₁2₁2₁ space group. CaSr_1-xAl₂SiO₇:xCe³⁺ phosphors were effectively excited by near-ultraviolet (UV) light (345 nm), which is suitable with the emission of near-UV light emitting diode chips. A broad blue emission (402 nm) was detected in CaSr_1-xAl₂SiO₇:xCe³⁺ and CaSr_0.94Al₂SiO₇:0.03Ce³⁺,0.03 M⁺ phosphors; this was attributed to the 4f⁰5d¹ → 4f¹ transition of Ce³⁺. To maintain charge equilibrium, charge compensators, such as monovalent Li⁺ and Na⁺ ions, were doped into the CaSr_0.97Al₂SiO₇:0.03Ce³⁺ phosphor, significantly improving its PL properties. The strongest emission intensity was achieved in CaSr_0.94Al₂SiO₇:0.03Ce³⁺,0.03Li⁺ phosphor. Addition of Li⁺ charge compensator was highly effective in improving PL properties of CaSr_0.97Al₂SiO₇:0.03Ce³⁺ phosphors.     

Red,green and blue-violet emission coexistence in white-light-emitting Ca3SiO4Cl2:Bi3+, Li+, Eu2+, Eu3+ phosphor

A series of emission-tunable Ca₃SiO₄Cl₂:Bi³⁺, Li⁺, Euⁿ⁺(n =2, 3) (CSC:Bi³⁺, Li⁺, Euⁿ⁺) phosphors have been synthesized via sol-gel method. The X-ray diffraction results indicate that the as-synthesized phosphors crystallize in a low temperature phase with the space group of P21/c. Energy transfer from Bi³⁺ to Eu³⁺/Eu²⁺ exists in CSC:Bi³⁺, Li⁺, Euⁿ⁺ phosphors. Under the excitation of 327 or 365 nm, the Ca_2.98−ySiO₄Cl₂:0.01Bi³⁺, 0.01Li⁺, yEuⁿ⁺(y=0.0001–0.002) phosphors show an intense green emission band around 505 nm, while under the excitation of 264 nm, three emission bands centered around 396 nm (Bi³⁺), 505 nm (Eu²⁺) and 614 nm (Eu³⁺) are observed and tunable colors from blue-violet to green or white are achieved in these phosphors by varying the content of Eu. White-light emission with the color coordinate (0.312, 0.328) is obtained in Ca_2.978SiO₄Cl₂:0.01Bi³⁺, 0.01Li⁺, 0.002Euⁿ⁺(n =2, 3). Based on these results, the as-prepared CSC:Bi³⁺, Li⁺, Eu²⁺, Eu³⁺ phosphors can act as color-tunable and single-phase white emission phosphors for potential applications in UV-excited white LEDs.     

Synthesis and photoluminescence enhancement of Ca3Sr3(VO4)4:Eu3+ red phosphors by co-doping with La3+

In this study, a series of red-emitting Ca₃Sr₃(VO₄)₄:Eu³⁺ phosphors co-doped with La³⁺ was prepared using the combustion method. The microstructures, morphologies, and photoluminescence properties of the phosphors were investigated. All Ca₃Sr₃(VO₄)₄:Eu³⁺, La³⁺ samples synthesized at temperatures greater than 700 ℃ exhibited the same standard rhombohedral structure of Ca₃Sr₃(VO₄)₄. Furthermore, the Ca₃Sr₃(VO₄)₄:Eu³⁺, La³⁺ phosphor was effectively excited by near-ultraviolet light of 393 nm and blue light of 464 nm. The strong excitation peak at 464 nm corresponded to the ⁷F₀→⁵D₂ electron transition of Eu³⁺. The strong emission peak observed at 619 nm corresponded to the ⁵D₀→⁷F₂ electron transition of Eu³⁺. Co-doping with La³⁺ significantly improved the emission intensity of Ca₃Sr₃(VO₄)₄:Eu³⁺ red phosphors. The optimum luminescence of the phosphor was observed at Eu³⁺ and La³⁺ concentrations of 5% and 6%, respectively. Moreover, co-doping with La³⁺ also improved the fluorescence lifetime and thermal stability of the Ca₃Sr₃(VO₄)₄:Eu³⁺ phosphor. The CIE chromaticity coordinate of Ca₃Sr₃(VO₄)₄:0.05Eu³⁺, 0.06La³⁺ was closer to the NTSC standard for red phosphors than those of other commercial phosphors; moreover, it had greater color purity than that of all the samples tested. The red emission intensity of Ca₃Sr₃(VO₄)₄:0.05Eu³⁺, 0.06La³⁺ at 619 nm was ~1.53 times that of Ca₃Sr₃(VO₄)₄:0.05Eu³⁺ and 2.63 times that of SrS:Eu²⁺. The introduction of charge compensators could further increase the emission intensity of Ca₃Sr₃(VO₄)₄:Eu³⁺, La³⁺ red phosphors. The phosphors synthesized herein are promising red-emitting phosphors for applications in white light-emitting diodes under irradiation by blue chips.