Surface modification of contact lenses using adsorption of ethylene oxide branched copolymers

To examine methods for reducing the amount of adsorbed protein on the surface of contact lenses during use, cationic copolymers containing poly(ethylene oxide) units were synthesized and evaluated as surface modifiers. Poly(ethylene oxide) graft‐branched copolymers of composition 70 mol % dimethylaminoethyl methacrylate (DM) and 30 mol % methoxy polyethylene glycol methacrylate (Mp0G; p = 2, 4, 9; the average number of the ethylene oxide units) were obtained using nonionic monomers containing poly(ethylene oxide) units. The copolymers very efficiently prevented protein adsorption on a contact lens. Contact angle measurements showed that immersion in tear fluid made the lens surface hydrophobic because of adsorption of proteins with hydrophobic residues. The copolymer pretreatment made the lens surface hydrophilic, even after dipping in artificial tear fluid. These results suggest that adsorption of the poly(ethylene oxide) branched copolymer on the contact lens would make the lens surface hydrophilic and prevent protein adsorption. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Synthesis of poly(fluorinated styrene)‐block‐poly(ethylene oxide) amphiphilic copolymers via atom transfer radical polymerization: potential application as paper coating materials

BACKGROUND: The surface of a substrate which comprises a fibrous material is brought into contact with a type of amphiphilic block copolymer which comprises hydrophilic/hydrophobic polymeric blocks. These amphiphilic copolymers have been synthesized by atom transfer radical polymerization (ATRP) technique. The atom transfer radical polymerization of poly(2,3,4,5,6‐pentafluorostyrene)‐block‐poly(ethylene oxide) (PFS‐b‐PEO) copolymers (di‐ and triblock structures) with various ranges of PEO molecular weights was initiated by a PEO chloro‐telechelic macroinitiator. The polymerization, carried out in bulk and catalysed by copper(I) chloride in the presence of 2,2′‐bipyridine ligand, led to A–B–A amphiphilic triblock and A–B amphiphilic diblock structures. RESULTS: With most of the macroinitiators, the living nature of the polymerizations led to block copolymers with narrow molecular weight distributions (1.09 < M_w/M_n < 1.33) and well‐controlled molecular structures. These block copolymers turned out to be water‐soluble through adjustment of the PEO block content (>90 wt%). Of all the block copolymers synthesized, PFS‐b‐PEO(10k)‐b‐PFS containing 10 wt% PFS was found to retard water absorption considerably. CONCLUSION: The printability of paper treated with the copolymers was evaluated with contact angle measurements and felt pen tests. The adsorption of such copolymers at the solid/liquid interface is relevant to the wetting and spreading of liquids on hydrophobic/hydrophilic surfaces. Copyright © 2009 Society of Chemical Industry     

ADSORPTION AND WETTING PROPERTIES OF PLURONIC BLOCK COPOLYMERS ON HYDROPHOBIC SURFACES STUDIED BY OPTICAL WAVEGUIDE LIGHTMODE SPECTROSCOPY AND DYNAMIC TENSIOMETRIC METHOD

Adsorption of four different poly(ethylene oxide)/poly(propylene oxide)/poly(ethylene oxide) triblock copolymers (Pluronics®) onto the hydrophobized surface of the sensor was measured by the optical waveguide lightmode spectroscopy (OWLS). Adsorbed amounts of Pluronic PE10300, PE10500, PE6400, and PE6800 determined in the concentration range of 10^-2-10 gdm^-3 were found to follow the order of the hydrophobicity of the Pluronic compounds characterized by their hydrophil-lipophil balance (HLB) values. Wettability of two hydrophobic surfaces, the poly(lactide-co-glycolide), PLGA70/30 copolymer (used as drug carrier in pharmaceutical applications) and silylated glass, in aqueous solutions of the above Pluronics were studied by a dynamic tensiometric method. The significant increase in the wetting tension observed after the adsorption of the surfactants, and hence the decrease of the apparent contact angle as the indication of the wetting effect on both the biopolymer and the hydrophobic glass, was correlated to the poly(ethylene oxide) (PEO) content of the adsorbed layer obtained on the hydrophobized sensor surface by the OWLS method.     

ADSORPTION AND WETTING PROPERTIES OF PLURONIC BLOCK COPOLYMERS ON HYDROPHOBIC SURFACES STUDIED BY OPTICAL WAVEGUIDE LIGHTMODE SPECTROSCOPY AND DYNAMIC TENSIOMETRIC METHOD

Adsorption of four different poly(ethylene oxide)/poly(propylene oxide)/poly(ethylene oxide) triblock copolymers (Pluronics®) onto the hydrophobized surface of the sensor was measured by the optical waveguide lightmode spectroscopy (OWLS). Adsorbed amounts of Pluronic PE10300, PE10500, PE6400, and PE6800 determined in the concentration range of 10^?2?10?gdm^?3 were found to follow the order of the hydrophobicity of the Pluronic compounds characterized by their hydrophil–lipophil balance (HLB) values. Wettability of two hydrophobic surfaces, the poly(lactide-co-glycolide), PLGA70/30 copolymer (used as drug carrier in pharmaceutical applications) and silylated glass, in aqueous solutions of the above Pluronics were studied by a dynamic tensiometric method. The significant increase in the wetting tension observed after the adsorption of the surfactants, and hence the decrease of the apparent contact angle as the indication of the wetting effect on both the biopolymer and the hydrophobic glass, was correlated to the poly(ethylene oxide) (PEO) content of the adsorbed layer obtained on the hydrophobized sensor surface by the OWLS method.     

Pluronic嵌段共聚物胶束化行为及其胶束增溶

两亲性质的Pluronic嵌段共聚物在合适条件下能自发形成内核很大的稳定胶束 ,其胶束化行为复杂 ,初步的研究深化了对两亲分子自组织机理的认识。实验发现这类胶束具有很强的增溶油溶性物质的能力 ,由于这些分子单体和胶束化行为的特点 ,可望利用这类嵌段共聚物实现在增溶应用场合中的突破。综述Pluronic嵌段共聚物的胶束化行为和胶束增溶规律的当前研究进展     

The preparation of carbon nanotube/poly(ethylene oxide) composites using amphiphilic block copolymers

Polymer/multiwall carbon nanotube (MWCNT) composites were prepared by using amphiphilic block copolymers as dispersant. First, MWCNTs were wrapped with amphiphilic block copolymers in aqueous solution. Poly(ethylene oxide) was selected as the hydrophilic block because of its strong affinity with water while one of the following polymers: poly(ethylene), poly(butadiene), poly(styrene), poly(propylene oxide), or poly(thiophene) was used as the hydrophobic block of the copolymers. The dispersions were characterized by optical microscopy and transmission electron microscopy along with UV–Visible adsorption and dynamic light scattering. Based on the results, we could assess the effect on CNT dispersion quality of both, the molar mass of copolymers, the nature of the hydrophobic block and the length of hydrophilic block. The crystallization behavior of composites prepared from these dispersions was investigated. Results were related to the dispersion of the nanoparticles in the polymer matrix.     

Synthesis of graft copolymer polyethylene‐ graft‐poly(ethylene oxide) by a new anionic graft‐from polymerization

A series of amphiphilic graft copolymers, PE‐graft‐PEO, containing hydrophobic polyethylene (PE) as the backbone and hydrophilic poly(ethylene oxide) (PEO) as the side‐chain, have been synthesized by a novel route. The graft structure and the molecular weight, as well as the molecular weight distribution of the graft copolymer can easily be controlled. The molecular weight of the side‐chain PEO is proportional to the reaction time and the monomer concentration, which indicates the ‘living’ character of the anionic polymerization of ethylene oxide. The produced copolymers PE‐graft‐PEO were characterized by ¹H NMR and DSC measurements. Copyright © 2004 Society of Chemical Industry     

Synthesis and self-association in aqueous media of poly(ethylene oxide)/poly(ethyl glycidyl carbamate) amphiphilic block copolymers

New temperature sensitive AB, ABA, and BAB amphiphilic block copolymers consisting of hydrophilic poly(ethylene oxide) and hydrophobic poly(ethyl glycidyl carbamate) blocks were synthesized by anionic polymerization followed by chemical modification reactions. The self-association of the block copolymers in aqueous media was studied by UV-vis spectroscopy and dynamic and static light scattering. The obtained block copolymers spontaneously form micelles in aqueous media. The critical micellization concentration varied from 0.5 to 4 g/L depending on the copolymer architecture and composition. The influence of the temperature upon the self-association of the block copolymers was investigated. The increase of temperature did not affect the value of the critical micellization concentration, but led to the formation of better defined micelles with narrow size distribution.     

Application of thermo-responsive poly(methyl vinyl ether) containing copolymers in combination with ultrasonic treatment for pigment surface modification in pigment dispersions

The process of surface modification of hydrophobic organic (copper phthalocyanine (CuPc)) as well as hydrophilic inorganic pigments (titanium dioxide) in aqueous dispersions by employing tailor-made thermo-responsive copolymers and the colloidal stability have been studied as a function of temperature. The pigment surface modification is achieved by conventional adsorption and by thermoprecipitation of amphiphilic methyl vinyl ether (MVE) containing block and graft copolymers, exhibiting a lower critical solution temperature (LCST), with poly(isobutyl vinyl ether) blocks and poly(ethylene oxide) side chains, respectively. The effect of mechanical treatment of the pigment dispersion by ultrasonic power alone or in combination with the LCST property was investigated. The course of the pigment surface coating process was followed by the electrokinetic sonic amplitude (ESA) method. The temperature-controlled sorption of PMVE-g-PEO graft copolymers on both inorganic and organic pigment surfaces was investigated. It was found that ultrasonic treatment together with LCST thermoprecipitation is a promising method for the surface modification of pigments with regard to dispersion stability.     

Synthesis and characterization of star-shaped block copolymer of poly-(?-caprolactone) and poly(ethyl ethylene phosphate) as drug carrier

A series of novel 4-arm biodegradable star block copolymers of poly(?-caprolactone) and poly(ethyl ethylene phosphate) were synthesized via ring-opening polymerization of 2-ethoxy-2-oxo-1,3,2-dioxaphospholane using hydroxyl terminated 4-arm star-shaped poly(?-caprolactone) and stannous octoate co-initiation system. Gel permeation chromatography (GPC), NMR and FT-IR were used to demonstrate the structure and analyze their compositions. The self-assembly behavior of these star-shaped copolymers in aqueous solution was studied by ¹H NMR and fluorescence technique, and the results indicated those copolymers formed nanoparticles in aqueous solution with hydrophobic poly(?-caprolactone) core and hydrophilic poly(ethyl ethylene phosphate) shell. The critical micelle concentration was relative to the length of poly(?-caprolactone) and poly(ethyl ethylene phosphate) block. Paclitaxel was encapsulated in the micelles and the release behavior demonstrated that a longer hydrophobic block resulted in slightly slower release rate from the micelles. These copolymer micelles were biocompatible and potential as drug-delivery vehicles for pharmaceutical application.     

The influence of hydrophobic substitution on self-association of poly(ethylene oxide)-b-poly(n-alkyl glycidyl carbamate)s-b-poly(ethylene oxide) triblock copolymers in aqueous media

A series of amphiphilic poly(ethylene oxide)-b-poly(n-alkyl glycidyl carbamate)s-b-poly(ethylene oxide) triblock copolymers were synthesized by reaction between poly(ethylene oxide)-b-polyglycidol-b-poly(ethylene oxide) precursor copolymer and four n-alkyl isocyanates: ethyl, propyl, butyl and pentyl. After dissolution in water at room temperature the copolymers spontaneously form micelles. The critical micellization concentrations were determined by UV-VIS spectroscopy. The dimensions of the micelles, the aggregation numbers, and in some cases the micellar shape were determined by dynamic and static light scattering in a relatively broad temperature range. Special attention has been paid to the influence of the number of the carbon atoms in the alkyl chains, and respectively, the relative hydrophobicity of the middle block upon the self-association process. Clouding transition was observed for all of the copolymers, the clouding point being dependent upon the length of the alkyl chain.     

Influence of the structure and composition on surface tension of aqueous solution of graft copolymers of polyacrylamide backbone and polyalkyleneoxide branches

Polyacrylamide homopolymers and graft copolymers of poly(acrylamide-g-ethylene oxide) and poly(acrylamide-g-propylene oxide) were synthesized, characterized by SEC, FTIR and ¹³C-NMR and the behavior of their aqueous solutions was evaluated by surface tension measurements. By using the macromonomer technique, it is more difficult to incorporate poly(propylene oxide) branches than poly(ethylene oxide) branches. Graft copolymers of polyacrylamide and poly(propylene oxide) showed higher reduction of surface tension than poly(acrylamide-g-ethylene oxide) since they present a structure made up of hydrophilic and hydrophobic segments. Poly(acrylamide-g-propylene oxide) exhibits surfactant behavior, and the surface tension of its aqueous solution depends on the poly(propylene oxide) graft chain length and amount. Received: 9 December 1996/Revised: 15 May 1997/Accepted: 23 May 1997     

Surface characterization of biocompatible polysulfone membranes modified with poly(ethylene glycol) derivatives

Self-transformable and blood compatible devices of sulfonated poly(ethylene glycol) acrylate diblock copolymer (PEG-SO₃A/OA) with hydrophilic and hydrophobic block entrapped to polysulfone membrane surface were investigated in terms of the degree of hydrophilicity. The asymmetric membrane was formed by phase inversion process, and the induced hydrophilicity by reorientation of diblock copolymer at interface was verified with contact angle measurement, electron spectroscopy for chemical analysis (ESCA) depth profiling with ion sputtering and platelet adhesion test. Molecular dynamics (MD) simulations for the interface of hydration layer were also performed with various hydrophilic copolymer densities to gain optimum interfacial structure in information. The dependency of water clustering behavior around diblock copolymers as a hydrophilicity parameter was described in terms of atom-atom radial distribution function (RDF). The results showed that the diblock copolymer entrapped surfaces demonstrated less platelet adhesion than control or copolymers having no hydrophobic blocks. In addition, oxygen composition significantly began to decrease deeper into the membrane, indicating the reorientation of diblock chains. Copolymer entrapped surfaces significantly induced the degree of water clustering, and the resulting equilibrium rearrangement of interfacial structures was distinctly dependent upon the density of copolymer. Taken together, the results show that the novel concept ofin situ self-transformable surface modification strategy was successfully developed for biocompatible ultrathin biomedical membrane device.     

Novel amphiphilic poly(ester‐urethane)s based on poly[(R)‐3‐hydroxyalkanoate]: synthesis,biocompatibility and aggregation in aqueous solution

BACKGROUND: The aim of this work was to develop polyhydroxyalkanoates (PHAs) for blood contact applications, and to study their self‐assembly behavior in aqueous solution when the PHAs are incorporated with hydrophilic segments. To do this, poly(ester‐urethane) (PU) multiblock copolymers were prepared from hydroxyl‐terminated poly(ethylene glycol) (PEG) and hydroxylated poly[(R)‐3‐hydroxyalkanoate] (PHA‐diol) using 1,6‐hexamethylene diisocyanate as a coupling reagent. The PEG segment functions as a soft, hydrophilic and crystalline portion and the poly[(R)‐3‐hydroxybutyrate] segment behaves as a hard, hydrophobic and crystalline portion. In another series of PU multiblock copolymers, crystalline PEG and completely amorphous poly[((R)‐3‐hydroxybutyrate)‐co‐(4‐hydroxybutyrate)] behaved as hydrophobic and hydrophilic segments, respectively. RESULTS: The formation of a PU series of block copolymers was confirmed by NMR, gel permeation chromatography and infrared analyses. The thermal properties showed enhanced thermal stability with semi‐crystalline morphology via incorporation of PEG. Interestingly, the changes of the hydrophilic/hydrophobic ratio led to different formations in oil‐in‐water emulsion and surface patterning behavior when cast into films. Blood compatibility was also increased with increasing PEG content compared with PHA‐only polymers. CONCLUSION: For the first time, PHA‐based PU block copolymers have been investigated in terms of their blood compatibility and aggregation behavior in aqueous solution. Novel amphiphilic materials with good biocompatibility for possible blood contact applications with hydrogel properties were obtained. Copyright © 2008 Society of Chemical Industry     

Temperature responsive bio-compatible polymers based on poly(ethylene oxide) and poly(2-oxazoline)s

This review covers the LCST behavior of two important polymer classes in aqueous solution, namely poly(2-oxazoline)s and systems whose thermo-responsiveness is based on their structural similarity to poly(ethylene oxide) (PEO). In order to elucidate the progress that has been made in the design of new thermo-responsive copolymers, experimental data that were obtained by different research groups are compared in detail. Copolymerization with hydrophilic or hydrophobic comonomers represents a suitable method to tune the coil to globule transition temperature of several homopolymers, and incorporation of other monomers provided further interesting features, such as pH responsiveness or sensing properties. In addition, living and controlled polymerization techniques enabled access to defined end groups and more advanced polymer architectures, such as graft copolymers or double responsive block copolymers. The effect of such structural variations on the temperature responsive behavior of the (co)polymers is discussed in detail.     

Phenylboronic acid as a sugar- and pH-responsive trigger to tune the multiple micellization of thermo-responsive block copolymer

Phenylboronic acid-containing thermo-responsive block copolymer, poly(ethylene oxide)-b-poly(methoxydi(ethylene glycol) methacrylate-co- aminophenylboronic acid ethyl methacrylate) (PEO-b-P(DEGMMA-co-PBAMA)), was employed to investigate the multiple micellization and dissociation transitions. The unique sugar- and pH-responsive properties of phenylboronic acid were interesting to provide two parallel approaches to tune the critical micellization temperature (CMT) and multiple micellization of thermo-responsive block copolymer. The block copolymers were molecularly soluble below 21 °C and underwent micellization above 21 °C at pH 8.7. After glucose was added at 24 °C, hydrophobic phenylboronic acid was changed to hydrophilic boronate-glucose complex and the CMT of the thermo-sensitive block was increased which caused the dissociation of micelles. In parallel, if the solution pH was increased from 8.7 to 11 at 25 °C, micelles were disrupted because of the formation of hydrophilic phenylboronate anion, which elevated the CMT of the thermo-sensitive block polymer. The introduction of phenylboronic acid groups into the thermo-responsive block copolymers provides a novel approach to tune the multiple micellization and dissociation transitions that might have great potentials in biomedical applications.     

pH/temperature sensitive poly(ethylene glycol)-based biodegradable polyester block copolymer hydrogels

Novel pH and temperature sensitive biodegradable block copolymers composed of poly(ethylene glycol) (PEG), polyglycolide (GA), ?-caprolactone (CL) and sulfamethazine oligomers (OSMs) were synthesized by ring opening polymerization and 1,3-dicyclohexyl-carbodiimide (DCC) mediated coupling reactions. Their physicochemical properties in aqueous media were characterized by ¹H NMR spectroscopy and gel permeation spectroscopy. The sol-gel phase transition behavior of OSM-PCGA-PEG-PCGA-OSM block copolymers was investigated both in solution and injection to PBS buffer at pH 7.4 and 37 °C. Aqueous solutions of OSM-PCGA-PEG-PCGA-OSM changed from a sol to a gel phase with increasing temperature and decreasing pH. The sol-gel transition properties of these block copolymers are influenced by the hydrophobic/hydrophilic balance of the copolymers, block length, hydrophobicity, stereoregularity of the hydrophobic components within the block copolymer, and the ionization of the pH functional groups in the copolymer, which depends on the environmental pH. Degradation of the triblock and pentablock copolymers at 37 °C (pH 7.4), and at 0 °C and 5 °C both at pH 8.0, was investigated. It was demonstrated here using the in vitro test method, that the anticancer agent paclitaxel (PTX) could be loaded and released by the pH and temperature sensitive OSM-PCGA-PEG-PCGA-OSM block copolymer, such that this could be used as a suitable matrix for subcutaneous injection in drug delivery systems.     

Synthesis and micellization of a new amphiphilic star-shaped poly(D,L-lactide)/polyphosphoester block copolymer

A new amphiphilic 4-arm star-shaped poly(D,L-lactide)/poly(ethyl ethylene phosphate) (ssPLA-b-PEEP) block copolymer was synthesized by ring-opening polymerization of ethyl ethylene phosphate (EEP) with hydroxyl terminated 4-arm star-shaped poly(D,L-lactide) (ssPLA) as a macroinitiator, which was prepared by ring-opening polymerization of D,L-lactide (LA) initiated by pentaerythrite using stannous octoate as catalyst. The structures of the block copolymers were confirmed by IR, ¹H-NMR and GPC analysis. Fluorescence measurements were applied to determine the critical micelle concentration (CMC) of the copolymer micelle solutions. The diameter and the distribution of micelles were characterized by dynamic light scattering (DLS) and the shape was perceived by transmission electron microscopy (TEM). The results indicated those copolymers formed nano-micelles in aqueous solution with hydrophobic poly(D,L-lactide) core and hydrophilic poly(ethyl ethylene phosphate) shell. The CMC of the copolymer solutions increased with the increments of the proportion of PEEP segments. TEM images demonstrated that all micelles were spherical.     

Surface modification of poly(ethylene terephthalate) film by coating with poly(ethylene glycol)‐grafted polystyrene

The poly(ethylene glycol) (PEG)‐grafted styrene (St) copolymer, which was formed as a nanosphere, was used as an agent to modify the surface of poly(ethylene terephthalate) (PET) film. The graft copolymer was dissolved into chloroform and coated onto the PET film by dip–coating method. The coated amount depends on the content ratios of PEG and St, the solution concentration, and the coating cycles. The graft copolymers having a low molecular weight of PEG‐ or St‐rich content was fairly stable on washing in sodium dodecyl sulfate (SDS) aqueous solution. It was confirmed that the PET surface easily altered its surface property by the coating of the graft copolymers. The contact angles of the films coated with the graft copolymers were very high (ca. 105–120°). The coated film has good antistatic electric property, which agreed with PEG content. The best condition of coating is a one‐cycle coating of 1% (w/v) graft copolymer solution. The coated surface had water‐repellency and antistatic electric property at the same time. The graft copolymer consisted of a PEG macromonomer; St was successfully coated onto PET surfaces, and the desirable properties of both of PEG macromonomer and PSt were exhibited as a novel function of the coated PE film. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 74: 1524–1530, 1999     

Synthesis, characterization and properties of functional star and dendritic block copolymers of ethylene oxide and glycidol with oligoglycidol branching units

Well-defined, four-arm star block copolymers of ethylene oxide and glycidol were prepared via controlled anionic polymerization using protected glycidol. The length of the poly(ethylene oxide) block was varied from DP = 10 to 50, while the length of the short polyglycidol block remained nearly constant, at DP = 4-6. Star block copolymers with hydroxyl groups at the ends of the arms after conversion to the corresponding alkoxides were used as multifunctional macroinitiators for the sequential polymerization of ethylene oxide and protected glycidol. After deprotection, the branched block copolymers of ethylene oxide and glycidol had narrow molar mass distributions and multiple hydroxyl groups (up to 200) at the peripheries. The structure and functionality were determined using size exclusion chromatography with a light scattering detector and nuclear magnetic resonance spectroscopy. The thermal properties of the synthesized copolymers were also investigated, as well as the hydrophilic dye uptake to the hydrophobic phase containing copolymers.