Fabrication of polyethyleneimine surface-functionalized fluorescent carbon dots and its applications towards highly sensitive and selective detection of glutathione in aqueous medium and in vitro cell imaging of HeLa cells

Journal of Materials Science: Materials in Electronics - The present study aimed to synthesize polyethyleneimine (PEI) surface-functionalized fluorescent carbon dots (CDs)-based biosensor...     

Investigation on variation and influencing factors of magnetization loss of HTS-coated conductor under alternating high magnetic field

Journal of Materials Science: Materials in Electronics - The magnetization loss of multilayer high-temperature superconductor (HTS)-coated conductors (CC)’s will affect the temperature,...     

Study of linear and non-linear optical properties of In–Se doped chalcogenide semiconducting glasses

Journal of Materials Science: Materials in Electronics - The present work focuses on the various linear and non-linear optical properties of antimony (Sb) and gallium (Ga) (both 0.1 at.%) doped...     

Effect of growth temperature on the morphology control and optical behavior of monolayer MoS2 on SiO2 substrate

Journal of Materials Science: Materials in Electronics - Chemical vapor deposition (CVD) is a promising method for producing high-quality two-dimensional (2D) transition metal dichalcogenides...     

Enhanced electrochemical performance of screen-printed carbon electrode by RF-plasma-assisted polypyrrole modification

Journal of Materials Science: Materials in Electronics - Screen-printed carbon electrode (SPCE) has been extensively used in electrochemical (EC) detections due to its excellent EC characteristics...     

Investigation of electrospray-deposited PEDOT:PSS thin film using an electrohydrodynamic jet printer for inverted QDLEDs

Journal of Materials Science: Materials in Electronics - In general, Poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate) (PEDOT:PSS) is spin-coated as a hole transport layer in multi-structured...     

Cerium oxide nanoparticles via gel-combustion for electrochemical investigation of pantoprazole in the presence of epinephrine

Journal of Materials Science: Materials in Electronics - In this work, cerium oxide nanoparticles (CeO2NPs) were prepared by naturally available Aloe-Vera (AV) gel as fuel via gel-combustion...     

Enhanced dielectric properties of PVA/PEDOT:PSS/MnO2 based composites for electronic applications

Journal of Materials Science: Materials in Electronics - Polymer composite (PC) films comprising polyvinyl alcohol (PVA) and poly(3,4-ethylene dioxythiophene):poly(styrene sulfonate) (PEDOT:PSS)...     

Preparation,electrical, thermal and mechanical properties of near-stoichiometric lithium tantalate wafers

Journal of Materials Science: Materials in Electronics - Near-stoichiometric lithium tantalate (NSLT) crystal wafers were prepared by a vapour transfer equilibrium (VTE) method. The electrical,...     

Effect of chitosan-incorporated Fe3O4 nanocomposites on the photocatalytic removal of organic molecules

Journal of Materials Science: Materials in Electronics - The bare iron oxide (IO) and iron oxide/chitosan (IOC) nanocomposites were prepared by co-precipitation method. The iron oxide and iron...     

Nonlinear conductivity characteristics of epoxy resin-impregnated nano-SiC-modified insulating paper

Journal of Materials Science: Materials in Electronics - Epoxy resin-impregnated insulating paper (RIP) is the main insulation of the high-voltage direct-current (HVDC) dry bushing. In order to...     

Studies on optical properties,thermal stability and electrical conductivity of copper alumina nanoparticles-reinforced Poly(pyrrole-co-indole) for optoelectronic devices

Journal of Materials Science: Materials in Electronics - This work focused on the effect of copper alumina (Cu–Al2O3) nanoparticles in poly(pyrrole-co-indole) (PPy-co-PIN) on optical...     

In situ growth of Ni(OH)2-porous nitrogen-doped graphene composite onto Ni foam support as advanced electrochemical supercapacitors materials

Journal of Materials Science: Materials in Electronics - High-surface-area Ni(OH)2-porous nitrogen-doped graphene (Ni(OH)2@p-NG) composite was electro-synthesized via a facile...     

Studies on the properties of copper tin hydroxide-based catalysts prepared by co-precipitation method for photocatalytic degradation of methylene blue dye

Journal of Materials Science: Materials in Electronics - In this work, we report the enhanced photocatalytic behaviour of copper tin hydroxide (CuSn(OH)6)-based catalyst materials for the...     

Effect of annealing temperature on SnS thin films for photodetector applications

Journal of Materials Science: Materials in Electronics - Tin sulfide (SnS) thin films were deposited at room temperature (RT) by thermal evaporation method and subsequently annealed at...     

Ginkgo leaves extract-assisted synthesis of ZnO/CuO nanocrystals for efficient UV-induced photodegradation of organic dyes and antibacterial activity

Journal of Materials Science: Materials in Electronics - Biogenic nanocrystals (NCs) were synthesized from Ginkgo biloba leaf extract (GLE) and applied as photocatalytic and antibacterial...     

Improved electrical,thermal, and mechanical properties of silicone rubber-based composite dielectrics by introducing one-dimensional SiC fillers

Journal of Materials Science: Materials in Electronics - In this paper, two kinds of one-dimensional (1D) silicon carbide (SiC) fillers, including silicon carbide whiskers (SiCw) and silicon...     

Insights into the mechanism of ZnO/g–C3N4 nanocomposites toward photocatalytic degradation of multiple organic dyes

Journal of Materials Science: Materials in Electronics - Graphitic–carbon nitride (g–C3N4)-based zinc oxide (ZnO) nanocomposite (ZnO/g–C3N4) is synthesized via...     

Characterization of some radiation shielding,optical, and physical properties of fluorophosphate glasses modified by Sm3+

Journal of Materials Science: Materials in Electronics - Fluorophosphates glass systems with a composition of 70(P2O5)–20(LiF)–10(AlF3)–x (Sm2O3): x?=?0.0, 0.2, 0.5,...     

Study of photocatalytic properties of clay intercalated semiconductor composite material of guanidinium tetrachloroferrate for oxidative degradation of model dye in sunlight

Journal of Materials Science: Materials in Electronics - Herein, different weight percentage ratios composites of montmorillonite-K10 clay (Mt) with semiconductor organic salt...