Design and evaluation in vitro of controlled release mucoadhesive tablets containing chlorhexidine

This investigation deals with the development of buccal tablets containing chlorhexidine (CHX), a bis-bis-guanide with antimicrobial and antiseptic effects in the oral cavity, and able to adhere to the buccal mucosa to give local controlled release of drug. A mucoadhesive formulation was designed to swell and form a gel adhering to the mucosa and controlling the drug release into the oral cavity.

Some batches of tablets were developed by direct compression, containing different amounts of hydroxypropylmethylcellulose (HPMC) and carbomer; changing the amount ratio of these excipients in formulations, it is possible easily modulate the mucoadhesive effect and release of drug. The in vitro tests were performed using the USP 26/NF paddle apparatus, a specifically developed apparatus, and a modified Franz diffusion cells apparatus. This last method allows a simultaneous study of drug release rate from the tablets and drug permeation through the buccal mucosa.

Similar tests have also been carried out on a commercial product, Corsodyl gel^®, in order to compare the drug release control of gel with respect to that of the mucoadhesive tablet, as a formulation for buccal delivery of CHX. While the commercial formulation does not appear to control the release, the formulation containing 15% w/w methocel behaves the best, ensuring the most rapid and complete release of the drug, together with a negligible absorption of the active agent as required for a local antiseptic action in the oral cavity.     

Design and Evaluation In Vitro of Controlled Release Mucoadhesive Tablets Containing Chlorhexidine

ABSTRACT

This investigation deals with the development of buccal tablets containing chlorhexidine (CHX), a bis-bis-guanide with antimicrobial and antiseptic effects in the oral cavity, and able to adhere to the buccal mucosa to give local controlled release of drug. A mucoadhesive formulation was designed to swell and form a gel adhering to the mucosa and controlling the drug release into the oral cavity.

Some batches of tablets were developed by direct compression, containing different amounts of hydroxypropylmethylcellulose (HPMC) and carbomer; changing the amount ratio of these excipients in formulations, it is possible easily modulate the mucoadhesive effect and release of drug. The in vitro tests were performed using the USP 26/NF paddle apparatus, a specifically developed apparatus, and a modified Franz diffusion cells apparatus. This last method allows a simultaneous study of drug release rate from the tablets and drug permeation through the buccal mucosa.

Similar tests have also been carried out on a commercial product, Corsodyl gel^®, in order to compare the drug release control of gel with respect to that of the mucoadhesive tablet, as a formulation for buccal delivery of CHX. While the commercial formulation does not appear to control the release, the formulation containing 15% w/w methocel behaves the best, ensuring the most rapid and complete release of the drug, together with a negligible absorption of the active agent as required for a local antiseptic action in the oral cavity.     

Sustained-release from layered matrix system comprising chitosan and xanthan gum

Sustained-release tablets of propranolol HCl were prepared by direct compression using chitosan and xanthan gum as matrix materials. The effective prolongation of drug release in acidic environment was achieved for matrix containing chitosan together with xanthan gum which prolonged the drug release more extensive than that containing single polymer. Increasing lactose into matrix could adjust the drug release characteristic by enhancing the drug released. Component containing chitosan and xanthan gum at ratio 1:1 and lactose 75% w/w was selected for preparing the layered matrix by tabletting. Increasing the amount of matrix in barrier or in middle layer resulted in prolongation of drug release. From the investigation of drug release from one planar surface, the lag time for drug release through barrier layer was apparently longer as the amount of barrier was enhanced. Least square fitting the experimental dissolution data to the mathematical expressions (power law, first order, Higuchi's and zero order) was performed to study the drug release mechanism. Layering with polymeric matrix could prolong the drug release and could shift the release pattern approach to zero order. The drug release from chitosan-xanthan gum three-layer tablet was pH dependent due to the difference in charge density in different environmental pH. FT-IR and DSC studies exhibited the charge interaction between of NH₃⁺ of chitosan molecule and COO^- of acetate or pyruvate groups of xanthan gum molecule. The SEM images revealed the formation of the loose membranous but porous film that was due to the gel layer formed by the polymer relaxation upon absorption of dissolution medium. The decreased rate of polymer dissolution resulting from the decreased rate of solvent penetration was accompanied by a decrease in drug diffusion due to ionic interaction between chitosan and xanthan gum. This was suggested that the utilization of chitosan and xanthan gum could give rise to layered matrix tablet exhibiting sustained drug release.     

A chitosan lactate/poloxamer 407-based matrix containing Eudragit RS microparticles for vaginal delivery of econazole: design and in vitro evaluation

A matrix based on chitosan lactate and poloxamer 407 was evaluated as a delivery system for the vaginal administration of the antifungal drug econazole. The matrix was investigated both containing the pure drug and after introducing microparticles of Eudragit RS 100 containing econazole. Eudragit RS 100 microparticles were prepared using an emulsion-extraction method and dispersed in a solution containing chitosan lactate (2% w/w) and poloxamer 407 (1.7% w/w). The microparticles, obtained with a yield of 64% w/w and an encapsulation efficiency of 42% w/w, had a diameter of less than 2 μm and a drug loading of 13% w/w. The compressed matrices, characterized by DSC, swelling, erosion, release and mucoadhesion studies, had behaviours dependent on the relative amounts of the contained microparticles. The matrix without microparticles (MECN) showed zero-order release kinetics, with a maximum drug-release of 60% w/w, while those containing 50 or 75% w/w microparticles showed a diffusion controlled release up to 8 and 16 h, respectively, and a linear trend after those time intervals, caused by the erosion process, which allowed reaching a drug-release of approximately 100% w/w at 22 h. In in vitro experiments, the matrices were mucoadhesive and active in inhibiting the growth of Candida albicans 796.     

Studies of Guar Gum Compression-Coated 5-Aminosalicylic Acid Tablets for Colon-Specific Drug Delivery

The aim of this study was to develop colon-specific delivery systems for 5-aminosalicylic acid (5-ASA) using guar gum as a carrier. Core tablets containing 5-ASA were prepared by wet granulation with starch paste and were compression coated with coating formulations containing different quantities of guar gum (300, 200, 150, and 125 mg). In vitro drug release studies were carried out in simulated gastric and intestinal fluids and in pH 6.8 buffer containing rat cecal contents. The application of 175 mg of coating formulation containing 150 mg of guar gum over 5-ASA core tablets resulted in the release of less than 2% drug in simulated gastric and intestinal fluids and about 93% of 5-ASA in pH 6.8 buffer containing rat cecal contents. Differential scanning calorimetric (DSC) studies showed the absence of any interaction between 5-ASA and the excipients on storage at 45°C for 12 weeks. The study confirmed that selective delivery of 5-ASA to the colon can be achieved using guar gum as a carrier in the form of a compression coating over the drug core.     

Studies of guar gum compression-coated 5-aminosalicylic acid tablets for colon-specific drug delivery

The aim of this study was to develop colon-specific delivery systems for 5-aminosalicylic acid (5-ASA) using guar gum as a carrier. Core tablets containing 5-ASA were prepared by wet granulation with starch paste and were compression coated with coating formulations containing different quantities of guar gum (300, 200, 150, and 125 mg). In vitro drug release studies were carried out in simulated gastric and intestinal fluids and in pH 6.8 buffer containing rat cecal contents. The application of 175 mg of coating formulation containing 150 mg of guar gum over 5-ASA core tablets resulted in the release of less than 2% drug in simulated gastric and intestinal fluids and about 93% of 5-ASA in pH 6.8 buffer containing rat cecal contents. Differential scanning calorimetric (DSC) studies showed the absence of any interaction between 5-ASA and the excipients on storage at 45°C for 12 weeks. The study confirmed that selective delivery of 5-ASA to the colon can be achieved using guar gum as a carrier in the form of a compression coating over the drug core.     

Investigation of Prolonged Drug Release from Matrix Formulations of Chitosan

A hydrocolloidal matrix system containing complexes of chitosan was investigated for preparation of sustained release tablets and examined in-vitro.

Theophylline tablets using chitosan as a sustained release base were evaluated. It was found that when chitosan is used in a concentration of more than 50% of tablet weight, an insoluble non-erosion type matrix was formed. Tablets prepared with a chitosan concentration of less than 33% were fast releasing.

Chitosan used in a concentration of about 10% acted as a disintegrant and the drug was dissolved within an hour.

Citric acid slowed down the release rates of chitosan based theophylline tablets. Theophylline tablets using carbomer-934P as a sustained release base were evaluated. Carbomer-934P in lower concentrations forms an erosion type matrix. In order to produce a twenty-four (24) hour sustained release tablet, more than 10% concentration of carbomer-934P is needed. Combination with chitosan and carbomer-934P produced slower releasing tablets.

A hydrocolloidal erosion type matrix was formulated using chitosan, carbomer-934Pand citric acid. Only 10% of chitosan was needed to prepare theophylline sustained release tablets in these mixtures.

The dose dumping potential of chitosan tablets due to rapid disintegration in alkaline media was eliminated by preparing hydrated erosion type matrix systems.     

Release of diltiazem hydrochloride from hydrophilic matrices of polyethylene oxide and carbopol

The mucoadhesion, swelling, and drug release behavior of polyethylene oxide (PEO) and carbopol (CP) matrices were studied using a water soluble model drug diltiazem hydrochloride. The mucoadhesive strength of the matrices increased with increase in polymer content. The results showed that PEO was more mucoadhesive than CP. Mucoadhesion of the tablets was dependent upon the swelling. Swelling was ascertained by measuring the axial and radial expansion of matrix tablets following exposure to media of physiological ionic strength. There was a marked increase in the swelling index of matrices containing high polymer content of PEO as compared to CP. Drug release kinetics were found to be closely related to dissolution and swelling properties of the matrices. The release was found to be non-fickian with n (release exponent) values ranging from 0.45-0.58. At a constant polymer content (15.84% w/w), the main contributing factor for the mucoadhesion, swelling, and release was the amount of PEO.     

Sustained-release from Layered Matrix System Comprising Chitosan and Xanthan Gum

ABSTRACT

Sustained-release tablets of propranolol HCl were prepared by direct compression using chitosan and xanthan gum as matrix materials. The effective prolongation of drug release in acidic environment was achieved for matrix containing chitosan together with xanthan gum which prolonged the drug release more extensive than that containing single polymer. Increasing lactose into matrix could adjust the drug release characteristic by enhancing the drug released. Component containing chitosan and xanthan gum at ratio 1:1 and lactose 75% w/w was selected for preparing the layered matrix by tabletting. Increasing the amount of matrix in barrier or in middle layer resulted in prolongation of drug release. From the investigation of drug release from one planar surface, the lag time for drug release through barrier layer was apparently longer as the amount of barrier was enhanced. Least square fitting the experimental dissolution data to the mathematical expressions (power law, first order, Higuchi's and zero order) was performed to study the drug release mechanism. Layering with polymeric matrix could prolong the drug release and could shift the release pattern approach to zero order. The drug release from chitosan-xanthan gum three-layer tablet was pH dependent due to the difference in charge density in different environmental pH. FT-IR and DSC studies exhibited the charge interaction between of NH₃⁺ of chitosan molecule and COO^? of acetate or pyruvate groups of xanthan gum molecule. The SEM images revealed the formation of the loose membranous but porous film that was due to the gel layer formed by the polymer relaxation upon absorption of dissolution medium. The decreased rate of polymer dissolution resulting from the decreased rate of solvent penetration was accompanied by a decrease in drug diffusion due to ionic interaction between chitosan and xanthan gum. This was suggested that the utilization of chitosan and xanthan gum could give rise to layered matrix tablet exhibiting sustained drug release.     

Aloin delivery on buccal mucosa: ex vivo studies and design of a new locoregional dosing system

Context: Chemoprevention of potential malignant disorders or cancerous lesions that affect oral mucosae requires extended duration of treatment. Locoregional delivery of natural products could represent a promising strategy for this purpose.

Objective: To investigate the aptitude of aloin to permeate through, or accumulate in, the buccal mucosa and to develop a new prolonged oro-mucosal drug delivery system.

Materials and methods: Permeation/accumulation of aloin from Curacao Aloe (containing 50% barbaloin) was evaluated ex vivo, using porcine buccal mucosa as the most useful model to simulate human epithelium. Oro-mucosal matrix tablets were prepared by dispersing aloin (10% w/w) in Eudragit® RS 100 as, biocompatible, low permeable, pH-independent, and non-swelling polymer. The prepared tablets were evaluated for drug–polymer compatibility, weight variation, drug uniformity content, diameter, thickness, hardness, friability, swelling, mucoadhesive strength, and drug release.

Results: Aloin has low tendency to cross buccal mucosa, permeation is marginal, and high drug amounts remain entrapped into the epithelium. Matrix tablets characteristics were in agreement with pharmacopoeial requirements. Drug release showed highly reproducible Higuchian profile. Delivery through matrix tablets promoted drug accumulation in the mucosal tissue.

Discussion and conclusion: Following application of matrix tablets on porcine buccal mucosa, the amount of discharged drug recovered in the tissue should be sufficient to produce the desired effects, providing therapeutic drug levels directly at the site of action. Aloin-loaded tablets are valid candidates for prevention/treatment of potentially malignant disorders and oral cancer and could potentially lead to clinically relevant drug delivery system as coadjuvant of conventional chemotherapy/radiation therapy.     

Influence of natural polymer coating on novel colon targeting drug delivery system

A novel colon targeted tablet formulation was developed using natural polysaccharides such as chitosan and guar gum as carriers and diltiazem hydrochloride as model drug. The prepared blend of polymer-drug tablets were coated with two layers, inulin as an inner coat followed by shellac as outer coat and were evaluated for properties such as average weight, hardness and coat thickness. In vitro release studies of prepared tablets were carried out for 2 h in pH 1.2 HCl buffer, 3 h in pH 7.4 phosphate buffer and 6 h in simulated colonic fluid (SCF) in order to mimic the conditions from mouth to colon. It was observed that 4% w/v of rat cecal contents in saline phosphate buffer (SCF) incubated for 24 h provides suitable conditions for in vitro evaluation of the formulations prepared. The drug release from the coated system was monitored using UV/ Visible spectroscopy. In vitro studies revealed that the tablets coated with inulin and shellac have controlled the drug release in stomach and small intestinal environment and released maximum amount of drug in the colonic environment. Among the polymers used, chitosan was found to be the suitable polymer for colon targeting. The study revealed that polysaccharides as carriers and inulin and shellac as coating materials can be used effectively for colon targeting of drugs for treating local as well as systemic disorders.     

Preparation and characterization of novel multi-core chitosan microspheres for stomach-specific delivery of hydrophilic antibiotics

Insufficient gastric mucosa drug concentration and short contact time were the main reason for the lack of eradication efficacy of Helicobacter pylori for peptic ulcer patients. Novel multi-core chitosan microspheres were prepared for stomach-specific delivery of hydrophilic antibiotics for the treatment of peptic ulcer. Chitosan microspheres with multiple Eudragit L100 cores were easily prepared by a new emulsification/coagulation encapsulating method. Swelling behaviors, surface amino groups and mucin absorption ability were investigated and the formulation that showed best mucoadhesive potential was adopted. The multi-core chitosan microspheres exhibited good mucoadhesiveness as well as controlled release manner for incorporated antibiotics in acidic environment. The release rate could be easily modulated with accumulative release ranging from 47.3 to 79.3% in 6 h. Accordingly, the multi-core chitosan microspheres could serve as a satisfactory vehicle for stomach-specific delivery of hydrophilic antibiotics.     

Oxycellulose as mucoadhesive polymer in buccal tablets

Background: Oxycellulose (OC) is biodegradable and bioabsorbable cellulose derivative used in medicine to support hemostasis and tissue healing. Recently, its antimicrobial and immunomodulating properties, as well as its potential in modern therapeutic systems as release modifying excipient, drug carrier, and/or mucoadhesive polymer, are widely discussed. Method: To study its last-mentioned characteristics, directly compressed tablets containing 5 mg of cetylpyridinium chloride (CPC) as a model drug and 90 mg of mucoadhesive polymer [oxycellulose sodium (NaOC) alone or in a combination with one of five widely used mucoadhesive polymers] were prepared to ensure 8 hours prolonged release of CPC. Physicochemical and mucoadhesive properties of prepared tablets were evaluated. Results: Based on obtained results, tablets containing OC in combination with hydroxypropylmethylcellulose (Methocel® K100LV) or carboxymethylcellulose sodium showed the best quality parameters (friability < 0.04%, tablet thickness < 2.17 mm, tablet hardness > 85 N, residence time > 256 minutes, mucoadhesive strength > 3.45 mN/mm) and dissolution profiles (more than 81% of CPC released within 8 hours). Conclusion: NaOC embodies excellent compressing, mechanical, and mucoadhesive properties; however, formulation with higher content of NaOC only showed shorter adhesion time (107 ± 7 minutes) and faster drug release (93.66% of CPC released within 2 hours), because of its good solubility in aqueous media.     

Development of polysaccharide-based colon targeted drug delivery systems for the treatment of amoebiasis

The main focus of this study is to develop colon targeted drug delivery systems for metronidazole (MTZ). Tablets were prepared using various polysaccharides or indigenously developed graft copolymer of methacrylic acid with guar gum (GG) as a carrier. Various polysaccharides such as GG, xanthan gum, pectin, carrageenan, β-cyclodextrin (CD) or methacrylic acid-g-guar (MAA-g-GG) gum have been selected and evaluated. The prepared tablets were tested in vitro for their suitability as colon-specific drug delivery systems. To further improve the colon specificity, some selected tablet formulations were enteric coated with Eudragit-L 100 to give protection in an acidic environment. Drug release studies were performed in simulated gastric fluid (SGF) for 2 hr followed by simulated intestinal fluid (SIF) at pH 7.4. The dissolution data demonstrate that the rate of drug release is dependent upon the nature and concentration of polysaccharide/polymer used in the formulations. Uncoated tablets containing xanthan gum or mixture of xanthan gum with graft copolymer showed 30-40% drug release during the initial 4-5 hr, whereas for tablets containing GG with the graft copolymer, it was 70%. After enteric coating, the release was drastically reduced to 18-24%. The other polysaccharides were unable to protect drug release under similar conditions. Preparations with xanthan gum as a matrix showed the time-dependent release behavior. Further, in vitro release was performed in the dissolution media with rat caecal contents. Results indicated an enhanced release when compared to formulations studied in dissolution media without rat caecal contents, because of microbial degradation or polymer solubilization. The nature of drug transport was found to be non-Fickian in case of uncoated formulations, whereas for the coated formulations, it was found to be super-Case-II. Statistical analyses of release data indicated that MTZ release is significantly affected by the nature of the polysaccharide used and enteric coating of the tablet. Differential scanning calorimetry indicated the presence of crystalline nature of drug in the formulations.     

Preparation and in vitro characteristics of lactoferrin-loaded chitosan microparticles

In order to achieve the delivery and controlled release of lactoferrin (LF), a biologically multifunctional protein, chitosan microparticles loaded with LF were prepared. Several types of chitosan microparticles containing LF were prepared by the w/o emulsification-solvent evaporation method, and the particle characteristics and release properties in JP 2nd fluid, pH 6.8, were examined. All kinds of microparticles were obtained at a yield of more than 75% (w/w). LF-loaded microparticles prepared by nonsonication and nonaddition of sulfate, named Ch-LF(N), showed high drug content, small particle size and spherical particle shape. Also, for release properties, Ch-LF(N) exhibited gradual drug release over 7 hr with less remaining in the microparticles. Considering the mucoadhesive properties of chitosan microparticles, Ch-LF(N) are suggested to be useful for gradual supply to topical diseased sites or for effective delivery to intestinal areas with abundant LF receptors.     

Optimization of piribedil mucoadhesive tablets for efficient therapy of Parkinson’s disease: physical characterization and ex vivo drug permeation through buccal mucosa

Objective: The aim of this study was optimization of buccal piribedil (PR) mucoadhesive tablets to improve its low bioavailability and provide controlled release for the treatment of Parkinson’s disease.

Methods: Buccal tablets were prepared by direct compression method using carbomer (CP), carboxymethyl cellulose (CMC), and hydroxypropyl methylcellulose (HPMC) as mucoadhesive polymers. Physical properties of powder mixtures and buccal tablets were evaluated. Physicochemical compatibility between ingredients was investigated with infrared spectroscopy and differential scanning calorimetry analysis. In vitro dissolution profiles and drug release kinetics of buccal tablets were investigated. Mucoadhesion and ex vivo permeation studies were performed using sheep buccal mucosa.

Results: Powder mixtures demonstrated sufficient flow properties and physical characteristics of all tablet formulations were within compendia limits. Tablet ingredients were absent of any chemical interactions. CP tablets displayed slower drug release compared to HPMC tablets with zero order release, while CMC tablets lost their integrity and released entire drug after 6?h following Higuchi model. All formulations displayed adequate mucoadhesion and steady state flux of PR through buccal mucosa were higher with HPMC compared to CP-containing tablets.

Conclusion: Overall, HPMC was found to combine desired controlled release and mucoadhesion characteristics with sufficient pharmaceutical quality for optimization of buccal tablets. Piribedil mucoadhesive buccal tablets designed for the first time may introduce a new alternative for the treatment of Parkinson’s disease.     

Preparation and characterization of laminated thiolated chitosan-based freeze-dried wafers for potential buccal delivery of macromolecules

This study involves the development and functional characterization of a thiolated chitosan (CS) system for potential buccal delivery of proteins. Thiolated CS was synthesized by conjugating pure CS with thioglycolic acid and dialyzed to remove excess acid. Amount of thiol groups immobilized on CS was determined using L-cysteine calibration curve. The weight average molecular weights of CS and thiolated CS were monitored using gel permeation chromatography. Laminated wafers were obtained by pouring gels (containing bovine serum albumin; BSA, different amounts of glutathione as enzyme inhibitor and mucin to mimic salivary conditions) of the thiolated CS into moulds previously lined with impervious ethylcellulose (EC) films and freeze-dried. The resulting formulations were analyzed using attenuated total reflectance Fourier transform infrared (FTIR) spectroscopy, circular dichroism (CD) and scanning electron microscopy (SEM). The formulations were further characterized for functional buccal mucosa performance using hydration, swelling, mucoadhesion and in vitro drug dissolution studies. FTIR showed successful thiolation of CS’s amine functionality, CD confirmed that BSA conformation remained unchanged throughout the gel formulation and freeze-drying process, whilst SEM showed a porous microstructure of the wafers and a uniform EC film laminate with no visible pores or cracks. The functional characterization studies showed that glutathione had significant effects on hydration, mucoadhesion and subsequently drug dissolution and release characteristics, whilst mucin affected the mucoadhesive properties of the wafers. It was concluded that BSA-loaded wafers containing 10% w/w glutathione as enzyme inhibitor was the formulation choice for potential buccal delivery and should be selected for further investigations.     

Polymers for Mucoadhesive Drug Delivery System: A Current Status

To overcome the relatively short gastrointestinal (GI) time and improve localization for oral controlled or sustained release drug delivery systems, bioadhesive polymers that adhere to the mucin/epithelial surface are effective and lead to significant improvement in oral drug delivery. Improvements are also expected for other mucus-covered sites of drug administration. Bioadhesive polymers find application in the eye, nose, and vaginal cavity as well as in the GI tract, including the buccal cavity and rectum. This article lays emphasis mainly on mucoadhesive polymers, their properties, and their applications in buccal, ocular, nasal, and vaginal drug delivery systems with its evaluation methods.     

The Effect of Chitosan Molecular Weight on the Characteristics of Spray-Dried Methotrexate-Loaded Chitosan Microspheres for Nasal Administration

In this article, the effect of the chitosan molecular weight (MW) on the characteristics of methotrexate (MTX)-encapsulated non-cross-linked chitosan microspheres was studied. Microspheres composed of low-molecular-weight (LMW, 40,000 Da), medium-molecular-weight (MMW, 480,000 Da) and high-molecular-weight (HMW, 850,000 Da) chitosan with the same degree of deacetylation (96%) were obtained by a simple spray-drying method. The MW of chitosan had a noticeable influence on the size distribution, encapsulation efficiency, micromeritic properties (angle of repose and bulk density), controlled release behavior, and mucoadhesive properties. The entrapment efficiencies were in the range of 90–99%. Spray-dried microspheres had a D₅₀ value of 3.3–4.9 μm, which was suitable for nasal insufflations. The microspheres with LMW chitosan have the best flowability and highest bulk density but were found to be poor in terms of adhesion and in controlling the release behavior of MTX. The MMW chitosan microspheres exhibited the strongest adhesion to the mucosal surface, and the angle of repose values were between 34 and 47 degrees. They could control the release rate by modifying the drug/polymer ratios. Microspheres with HMW chitosan exhibited a lower adhesion than MMW chitosan and a lower release rate of MTX. The physical state of MTX in the chitosan matrix was studied by differential scanning calorimetry, which indicated the presence of a solid dispersion of the amorphous drug in the chitosan matrix. Nasal ciliotoxity showed only minor cilia irritation due to the microspheres, and consequently, they are suitable for nasal drug delivery.     

Polymers for mucoadhesive drug delivery system: a current status

To overcome the relatively short gastrointestinal (GI) time and improve localization for oral controlled or sustained release drug delivery systems, bioadhesive polymers that adhere to the mucin/epithelial surface are effective and lead to significant improvement in oral drug delivery. Improvements are also expected for other mucus-covered sites of drug administration. Bioadhesive polymers find application in the eye, nose, and vaginal cavity as well as in the GI tract, including the buccal cavity and rectum. This article lays emphasis mainly on mucoadhesive polymers, their properties, and their applications in buccal, ocular, nasal, and vaginal drug delivery systems with its evaluation methods.