B3G中的多跳蜂窝小区的结构分析

基于多跳通信及蜂窝通信的特点,提出了一种由中心基站及其周围的固定多跳中继节点共同实现小区覆盖范围的多跳小区结构。在此结构中,基站附近的移动台以一跳方式直接接入基站,而距离基站较远的移动台通过其与基站之间的多跳中继节点的中继以多跳通信方式接入基站。该结构提供了在低成本及低发射功率条件下完成区域覆盖的方法。并对多跳小区结构的覆盖特性进行了分析,通过仿真计算给出了多跳节点数目与小区覆盖范围的关系。     

蜂窝与ad hoc融合网络的路由算法

蜂窝网络与ad hoc网络作为两种不同性质的网络结合,可以提高系统的容量和吞吐量、扩大覆盖范围、均衡小区业务、提高用户下行传输速率等等。融合网络路由将不再是基于单一的蜂窝或是ad hoc网络的路由算法,而是在源和目的节点之间通过多跳、代理或是蜂窝网络建立一条最佳的路径。这里将介绍几种融合网络模型的路由算法,并重点介绍其中的一种算法。     

蜂窝与ad hoc融合网络的路由算法

蜂窝网络与ad hoc网络作为两种不同性质的网络结合,可以提高系统的容量和吞吐量、扩大覆盖范围、均衡小区业务、提高用户下行传输速率等融合网络路由将不再是基于单一的蜂窝或是ad hoc网络的路由算法．而是在源和目的节点之间通过多跳、代理或是蜂窝网络建立一务最佳的路径这里将介绍几种融合网络模型的路由算法,并重点介绍其中的一种算法。     

一种基于Ad hoc网络的多网融合方案及其实验验证系统的实现

本文提出了一种基于Ad hoc网络的多网融合结构,系统中的移动终端可以形成自组织网络,通过多跳路由接入PSTN、3G蜂窝网络以及互联网等多种网络.文中给出了关于此方案的实验验证系统的设计和实现,包括组网协议、多跳路由协议以及多网接入网关和多模移动终端的设计与实现,并对系统的性能进行了分析与仿真,结果表明所提出的方案在组网效率、多跳路由发现时间等方面均有所改善.     

多跳蜂窝混合网络路由协议的研究

文章分析了多跳蜂窝混合网络的优势及存在的问题，提出了一种支持多跳蜂窝混合网络的路由协议HMCNRP。HMCNRP协议采用区域路由技术和代理注册机制，实现了工作模式选择智能化、转换灵活化，提高了网络的连通性和覆盖范围，增强了网络的鲁棒性。     

UCRP—一种能量有效的WSN非均匀分簇路由协议

提出了一种新的能量有效的非均匀分簇路由协议—UCRP.根据距离基站的远近将网络分为大小不同的簇;簇内数据传输根据簇范围的大小采用单跳或多跳;簇间数据传输构建多跳路由,簇首选择下一跳节点时将能量与最小跳数路由算法相结合;最后在能量有效的前提下对LEACH协议易受到HELLO flooding攻击提出了安全设想.仿真结果表明:该协议能够有效地均衡簇首和全网能耗,延长网络生存时间.     

基于数据融合的无线传感器网络路由算法

在分簇协议LEACH和链状协议PEGASIS的基础上,提出一种新的基于数据融合的分簇路由算法.簇首节点采用多跳方式传输数据,并根据周围节点的密集程度构造不同大小的簇;簇内节点计算上行和下行节点构造数据融合树,采用时分复用调度算法进行多跳路由.NS2仿真结果表明该路由算法均衡了各个节点的能量消耗,延长了网络存活时间,并降低了网络延迟.     

基于最小生成树的LEACH协议改进

LEACH(Low Energy Adaptive Clustering Hierarchy)是一种被广泛应用于无线传感网络的路由协议.本文针对LEACH协议中,远距离节点作为簇首时能量消耗过多的缺点,提出了一种改进的无线传感网络路由协议.多跳传输LEACH改进协议在节点选出簇首之后,采用最小生成树中Prim算法,在簇首与基站间采用多跳传输.为克服多跳传输时距基站第一跳的簇首能量消耗较多的缺点,阈值需要采用节点距基站的距离和节点距簇首的平均距离来调整,已达到平衡节点能量消耗的目的.仿真结果表明,改进的算法可减少和均衡能量消耗,提高能量的使用,以及延长整个网络寿命方面具有很大的优势.     

下一代移动通信系统中的多跳通信

多跳通信可以在低功率消耗的情况下，实现无线信号的传输，并增加了蜂窝网络拓扑结构的灵活性，成为下一代移动通信技术中的研究热点。本文介绍了当前已经提出的多跳蜂窝网络系统，分析了多跳蜂窝通信的特性，并讨论了今后多跳蜂窝通信系统中的主要研究领域和问题。     

无线多跳网络中一种基于网络编码的机会路由

近年来机会路由和网络编码是两种利用无线信道广播特性提高网络性能的新兴技术。相比传统的静态路由决策,机会路由利用动态和机会路由选择减轻无线有损链路带来的影响。网络编码可以提高网络的资源利用率。但编码机会依赖于多个并发流所选路径的相对结构。为了创造更多的网络编码机会和提高网络吞吐量,本文提出了一种基于流间网络编码的机会路由(ORNC)算法。在ORNC中,每个分组转发的机会路径选择是基于网络编码感知的方式进行的。当没有编码机会时,采用背压策略选择下一跳转发路径以平衡网络负载。仿真结果表明本文提出的ORNC算法能够提高无线多跳网络的吞吐量。     

An Energy Consumption Model for Performance Analysis of Routing Protocols for Mobile Ad Hoc Networks

A mobile ad hoc network (or manet) is a group of mobile, wireless nodes which cooperatively form a network independent of any fixed infrastructure or centralized administration. In particular, a manet has no base stations: a node communicates directly with nodes within wireless range and indirectly with all other nodes using a dynamically-computed, multi-hop route via the other nodes of the manet.Simulation and experimental results are combined to show that energy and bandwidth are substantively different metrics and that resource utilization in manet routing protocols is not fully addressed by bandwidth-centric analysis. This report presents a model for evaluating the energy consumption behavior of a mobile ad hoc network. The model was used to examine the energy consumption of two well-known manet routing protocols. Energy-aware performance analysis is shown to provide new insights into costly protocol behaviors and suggests opportunities for improvement at the protocol and link layers.     

Clustering routing protocol based on improved PSO algorithm in WSN

Aiming at the problem that the location distribution of cluster head nodes filtered by wireless sensor network clustering routing protocol was unbalanced and the data transmission path of forwarding nodes was unreasonable,which would increase the energy consumption of nodes and shorten the network life cycle,a clustering routing protocol based on improved particle swarm optimization algorithm was proposed.In the process of cluster head election,a new fitness function was established by defining the energy factor and position equalization factor of the node,the better candidate cluster head node was evaluated and selected,the position update speed of the candidate cluster head nodes was adjusted by the optimized update learning factor,the local search and speeded up the convergence of the global search was expanded.According to the distance between the forwarding node and the base station,the single-hop or multi-hop transmission mode was adopted,and a multi-hop method was designed based on the minimum spanning tree to select an optimal multi-hop path for the data transmission of the forwarding node.Simulation results show that the clustering routing protocol based on improved particle swarm optimization algorithm can elect cluster head nodes and forwarding nodes with more balanced energy and location,which shortened the communication distance of the network.The energy consumption of nodes is lower and more balanced,effectively extending the network life cycle.     

基于TinyOS的无线传感器网络LEACH算法的改进

LEACH协议是无线传感器网络中最流行的分簇路由协议之一.针对LEACH算法簇分布不均匀以及网络能耗不均衡等问题提出了一种高效节能多跳路由算法.在簇建立阶段,新算法根据网络模型计算出最优簇头间距值,调整节点通信半径以控制簇的大小,形成合理网络拓扑结构;在数据传输阶段,簇头与基站之间采用多跳的通信方式,降低了节点能耗.在TinyOS操作系统下,使用nesC语言设计实现了LEACH-EEMH算法.基于TOSSIM平台的仿真结果表明,新算法较LEACH算法在均衡网络能耗、延长网络寿命方面具有显著优势.     

Application of IEEE 802.16 Mesh Networks as the Backhaul of Multihop Cellular Networks

Cellular networks have been widely used to support many new audio-and video-based multimedia applications. The demand for higher data rate and diverse services has driven the research on multihop cellular networks (MCNs). With its ad hoc network features, an MCN can offer many additional advantages, such as increased network throughput, scalability and coverage. However, providing ad hoc capability to MCNs is challenging as it may require proper wireless interfaces. In this article, the architecture of IEEE 802.16 network interface to provide ad hoc capability for MCNs is investigated, with its focus on the IEEE 802.16 mesh networking and scheduling. Several distributed routing algorithms based on network entry mechanism are studied and compared with a centralized routing algorithm. It is observed from the simulation results that 802.16 mesh networks have limitations on providing sufficient bandwidth for the traffic from the cellular base stations when a cellular network size is relatively large.     

Radio resource management scheme and outage analysis for network-assisted multi-hop D2D communications

In a cellular network it's very difficult to make spectrum resource more efficiently. Device-to-Device (D2D) technology enables new service opportunities, and provides high throughput and reliable communication while reducing the base station load. For better total performance, short-range D2D links and cellular links share the same radio resource and the management of interference becomes a crucial task. Here we argue that single-hop D2D technology can be used to further improve cellular networks performance if the key D2D radio resource management algorithms are suitably extended to support multi-hop D2D communications. Aiming to establish a new paradigm for the analysis and design of multi-hop D2D communications, We propose a radio resource allocation for multi-hop D2D routes based on interference avoidance approach in LTE-A networks. On top of that, we investigate the outage probability of D2D communication. We first introduce a new definition of outage probability by considering the maximum distance to be allowable for single-hop transmission. Then we study and analyze the outage performance of a multi-hop D2D route. We derive the general closed form expression of outage probability of the multi-hop D2D routes. The results demonstrate that the D2D radio, sharing the same resources as the cellular network, provide higher capacity compared to pure cellular communication where all the data is transmitted through the base station. They also demonstrate that the new method of calculation of D2D multi hop outage probability has better performance than classical method defined in the literature.     

多跳认知无线Mesh网络中频谱决策与路由的跨层设计

灵活高效的频谱共享技术能够实现频谱资源的最大化利用,有效地缓解了无线频谱紧缺的现状。在一个与TDMA/FDMA蜂窝网络共存的多跳认知无线Mesh网络环境下,基于覆盖式（Underlay）与机会式（Overlay）相结合的频谱共享机制,提出了一种有效的链路层频谱决策与网络层路由的跨层设计方案。仿真结果表明,该方案比基于最小跳数的随机信道选择算法在网络端到端传输性能上有显著的优势。     

基于约束路由的绿色虚拟拓扑设计算法

摘 要：针对Internet核心网日益严重的能耗问题,建立了绿色虚拟拓扑设计(GVTD)问题的形式化模型,通过业务汇聚、按需配置网络资源、动态虚拟拓扑设计和多粒度睡眠机制降低网络能耗。提出了一种基于约束路由的启发式算法——CBR-GVTD算法,利用单跳路由和多跳路由相结合的方法构建网络虚拟拓扑,并通过基于约束的路由实现网络功耗与路由性能的折衷。模拟结果表明,CBR-GVTD算法可在接口平均利用率为80%~90%和最大路由跳数不超过5的条件下,最多可降低62%~90%的网络功耗     

Query Localization Techniques for On-Demand Routing Protocols in Ad Hoc Networks

Mobile ad hoc networks are characterized by multi-hop wireless links, absence of any cellular infrastructure, and frequent host mobility. Design of efficient routing protocols in such networks is a challenging issue. A class of routing protocols called on-demand protocols has recently found attention because of their low routing overhead. We propose a technique that can reduce the routing overhead even further. The on-demand protocols depend on query floods to discover routes whenever a new route is needed. Our technique utilizes prior routing histories to localize the query flood to a limited region of the network. Simulation results demonstrate excellent reduction of routing overheads with this mechanism. This also contributes to a reduced level of network congestion and better end-to-end delay performance of data packets.