A study on synthesis and properties of Fe<Subscript>3</Subscript>O<Subscript>4</Subscript> nanoparticles by solvothermal method

Magnetic nanoparticles (Fe₃O₄) were synthesized by the solvothermal method using FeCl₃ · 6H₂O and ethylene glycol as a reactant. Powder X-ray diffraction, FT-IR, TEM, SEM, and VSM were used to characterize the magnetic particles. The reacting factors, such as reacting time, the concentration of iron source and surfactant, especially the effect of NaAc · 3H₂O, were studied. The results indicated that NaAc · 3H₂O plays the role not only as a dispersant but also a structure-directing agent. The synthesized Fe₃O₄ particles showed excellent magnetic property, which made them have potential for application in magnetic nanodevices and biomedicine.     

Structural evolution of hierarchical porous NiO/Al<Subscript>2</Subscript>O<Subscript>3</Subscript> composites and their application for removal of dyes by adsorption

Hierarchical porous NiO/Al₂O₃ composites were successfully prepared by two-steps. First, the core-shell structured Al₂O₃ microspheres were prepared via a template-free hydrothermal route using KAl(SO₄)₂·12H₂O and Al₂(SO₄)₃·18H₂O as aluminum source. Then, the NiO/Al₂O₃ composites with micro- and nano-hierarchical structures were prepared by a hydrothermal method combining the subsequent calcination process. The obtained characterization result presented that the morphology of hierarchical Al₂O₃ microsphere tuned to irregular platelets by simply varying Ni/Al ratios. The BET analysis showed that the special surface area from 52.12m² g^?1 to 214.8m² g^?1 after two hydrothermal complex process. Effects of Ni/Al ratio, adsorbent dosage, Congo red (CR) concentration, coexisting ions, adsorption time and temperature were investigated. The obtained results indicated that NiO/Al₂O₃ composite had the high adsorption efficiency (99.6%) and great adsorption capacity (186.9mg g^?1) under the optimum conditions. The adsorption isotherm and kinetics data were found to be well fitted and in good agreement with the Langmuir isotherm model and pseudo-second order model, respectively. The hierarchical porous NiO/Al₂O₃ composites presented remarkably higher adsorption efficiency during five recycling, which showed their potential as the highly efficient adsorbent for removal of CR in wastewater.     

Synthesis,characterization and electrical properties of polypyrrole/V<Subscript>2</Subscript>O<Subscript>5</Subscript> composites

Polypyrrole (PPy) and its composites with vanadium pentoxide (V₂O₅) were synthesized in aqueous medium by chemical oxidation polymerization using FeCl₃·6H₂O as an oxidant. The materials were characterized by Fourier transform infrared (FT-IR) spectroscopy, X-ray diffractometry (XRD), thermogravimetry analyzer (TGA), scanning electron microscopy (SEM), energy dispersive X-ray (EDX), UV/visible spectroscopic techniques and LCR-meter. The FT-IR results confirmed the successful synthesis of PPy and PPy/V₂O₅ composites. The XRD study showed the amorphous and crystalline nature of PPy and PPy/V₂O₅ composites, respectively. The TGA analysis showed slight increase in the thermal stability of the composites. The SEM data verified the porous nature of PPy and the composites. The UV/visible spectrometry confirmed the doping of PPy in composites. The electrical properties of the materials displayed their semiconducting nature. The resistance of the samples was found to be dependent on temperature and the contents of V₂O₅ in the composites.     

Synthesis of spinel Ni<Subscript>0.75</Subscript>Zn<Subscript>0.25</Subscript>Fe<Subscript>2</Subscript>O<Subscript>4</Subscript> and the properties of a coating obtained by gas-flame spraying

Ferrite Ni_0.75Zn_0.25Fe₂O₄ was prepared by the solid-state synthesis and thermal decomposition of the complex oxalate Ni_0.75Zn_0.25Fe₂(C₂O₄)₃ · 6H₂O. The oxalate precursor and the products obtained at different stages of the thermal decomposition were identified by differential thermal analysis and X-ray and X-ray photoelectron spectroscopy. The properties of a ferromagnetic coating deposited on a substrate by gasflame coating were studied. The magnetic properties of the Ni-Zn ferrite product and the ferromagnetic coating were also investigated.     

Preparation of stable magnetic nanofluids containing Fe<Subscript>3</Subscript>O<Subscript>4</Subscript>@PPy nanoparticles by a novel one-pot route

Stable magnetic nanofluids containing Fe₃O₄@Polypyrrole (PPy) nanoparticles (NPs) were prepared by using a facile and novel method, in which one-pot route was used. FeCl₃·6H₂O was applied as the iron source, and the oxidizing agent to produce PPy. Trisodium citrate (Na₃cit) was used as the reducing reagent to form Fe₃O₄ NPs. The as-prepared nanofluid can keep long-term stability. The Fe₃O₄@PPy NPs can still keep dispersing well after the nanofluid has been standing for 1 month and no sedimentation is found. The polymerization reaction of the pyrrole monomers took place with Fe³⁺ ions as the initiator, in which these Fe³⁺ ions remained in the solution adsorbed on the surface of the Fe₃O₄ NPs. Thus, the core-shell NPs of Fe₃O₄@PPy were obtained. The particle size of the as-prepared Fe₃O₄@PPy can be easily controlled from 7 to 30 nm by the polymerization reaction of the pyrrole monomers. The steric stabilization and weight of the NPs affect the stability of the nanofluids. The as-prepared Fe₃O₄@PPy NPs exhibit superparamagnetic behavior.     

High toughening and low friction of novel bismaleimide composites with organic functionalized serpentine@Fe<Subscript>3</Subscript>O<Subscript>4</Subscript>

A novel hybrid particles Srp@Fe₃O₄/OA, composed of phyllosilicate Serpentine (Srp), magnetic Fe₃O₄ and oleic acid (OA), has been explored via a two-step process. Then the as-prepared Srp@Fe₃O₄/OA particles were firstly mixed with bismaleimide resin (BMI) to constructe a series of Srp@Fe₃O₄/OA/BMI composites, the mechanical properties, tribological properties and thermal stability of the Srp@Fe₃O₄/OA/BMI composites are subsequently investigated. The characterization results indicate that the 0.3 wt% Srp@Fe₃O₄/OA/BMI composite shows the maximum impact strength (19.0 kJ·m^?2) and minimum friction coefficient (0.21), higher 52.7% and lower 55% than those of the neat BMI resin, respectively. The significantly enhanced toughness and tribological performance of the Srp@Fe₃O₄/OA/BMI composites are mainly due to the increase of the free volume and the uniformly distribution of Srp@Fe₃O₄/OA, as well as the good interfacial adhesion between BMI matrix and Srp@Fe₃O₄/OA particles.     

Fabrication and microwave absorption properties of size-controlled polymer/Fe<Subscript>3</Subscript>O<Subscript>4</Subscript>hybrid microsphere based on aggregation-induced emission active polyarylene ether nitrile

The article fabricated novel polymer/magnetic hybrid microspheres via solvothermal method by using ferroferric oxide (Fe₃O₄) and aggregation-induced emission (AIE) active polyarylene ether nitrile (PEN) as building components. The PEN was copolymerized through phenolphthalin and AIE-gen (4, 4′-(1, 2-di (4-hydroxyphenyl)-1, 2-diyl) diphenol), wherein AIE-gen endowed the copolymer with AIE effect so that the copolymer could aggregate correspondingly in different solvent/nonsolvent systems and produce fluorescence enhanced. In these experiments, the diameter of Fe₃O₄/PEN hybrid microspheres was controlled by the volume proportion of nonsolvent (ethylene glycol (EG)) and solvent (N-methyl pyrrolidone (NMP)) in preparation process based on the aggregation behavior of AIE active PEN. Moreover, the resulted hybrid microspheres also had excellent magnetic and electromagnetic absorption performance. Specifically, they all exhibited a strong reflection loss peak both in the low and high frequency range. Meanwhile, with the change of coating thickness, these hybrid microspheres had a wide wave-absorbing frequency from 5 GHz to16 GHz. The results supported that the hybrid microspheres integrated with magnetism and AIE property will have a wide application in the preparation and improvement of size-controlled inorganic organic nanocomposites.     

Preparation and characterization of RuO<Subscript>2</Subscript> · <Emphasis Type="Italic">x</Emphasis>H<Subscript>2</Subscript>O/carbon aerogel composites for supercapacitors

A series of RuO₂ · xH₂O/carbon aerogel (CA) composite electrode materials was prepared by a chemical precipitation method. Ultrasonication was used to accelerate the chemical reaction and improve the dispersion of RuO₂ · xH₂O particles on the surface and the pores of the aerogel. The structure and morphology of the as-prepared composite were characterized by N₂ adsorption isotherm, X-ray diffraction (XRD), and field emission-scanning electron microscopy (FE-SEM). The results showed that the CA had a pearly network structure and the composites had a relatively high specific surface area and mesopore volume. The electrochemical performance of the composite electrodes was studied by cyclic voltammetry, galvanostatic charge/discharge measurements and electrochemical impedance measurements. The results indicated a substantial increase in the specific capacitance of the composite. Moreover, the utilization efficiency of RuO₂ · xH₂O was greatly improved by loading it on the conductive and porous CA due to a significant improvement in the inter-particle electronic conductivity and the extensive mesoporous network of the composites.     

Effect of surface modification of Fe<Subscript>3</Subscript>O<Subscript>4</Subscript> nanoparticles on the preparation of Fe<Subscript>3</Subscript>O<Subscript>4</Subscript>/polystyrene composite particles via miniemulsion polymerization

Fe₃O₄ nanoparticles were modified by n-octadecyltrimethoxysilane (C18TMS) and 3-trimethoxysilylpropylmethacrylate (MPS). The modified Fe₃O₄ nanoparticles were used to prepare Fe₃O₄/polystyrene composite particles by miniemulsion polymerization. The effect of surface modification of Fe₃O₄ on the preparation of Fe₃O₄/polystyrene composite particles was investigated by transmission electron microscopy, Fourier transform infrared spectrophotometer (FT-IR), contact angle, and vibrating sample magnetometer (VSM). It was found that C18TMS modified Fe₃O₄ nanoparticles with high hydrophobic property lead to the negative effect on the preparation of the Fe₃O₄/polystyrene composite particles. The obtained composite particles exhibited asymmetric phase-separated structure and wide size distribution. Furthermore, un-encapsulated Fe₃O₄ were found in composite particles solution. MPS modified Fe₃O₄ nanoparticles showed poor hydrophobic properties and resulted in the obtained Fe₃O₄/polystyrene composite particles with regular morphology and narrow size distribution because the ended C=C of MPS on the surface of Fe₃O₄ nanoparticles could copolymerize with styrene which weakened the phase separation distinctly.     

Synthesis of Heterogeneous Li<Subscript>4</Subscript>Ti<Subscript>5</Subscript>O<Subscript>12</Subscript> Nanostructured Anodes with Long-Term Cycle Stability

The 0D-1D Lithium titanate (Li₄Ti₅O₁₂) heterogeneous nanostructures were synthesized through the solvothermal reaction using lithium hydroxide monohydrate (Li(OH)·H₂O) and protonated trititanate (H₂Ti₃O₇) nanowires as the templates in an ethanol/water mixed solvent with subsequent heat treatment. A scanning electron microscope (SEM) and a high resolution transmission electron microscope (HRTEM) were used to reveal that the Li₄Ti₅O₁₂ powders had 0D-1D heterogeneous nanostructures with nanoparticles (0D) on the surface of wires (1D). The composition of the mixed solvents and the volume ratio of ethanol modulated the primary particle size of the Li₄Ti₅O₁₂ nanoparticles. The Li₄Ti₅O₁₂ heterogeneous nanostructures exhibited good capacity retention of 125 mAh/g after 500 cycles at 1C and a superior high-rate performance of 114 mAh/g at 20C.     

Preparation and characterization of spindle-like Fe<Subscript>3</Subscript>O<Subscript>4</Subscript> mesoporous nanoparticles

Magnetic spindle-like Fe₃O₄ mesoporous nanoparticles with a length of 200 nm and diameter of 60 nm were successfully synthesized by reducing the spindle-like α-Fe₂O₃ NPs which were prepared by forced hydrolysis method. The obtained samples were characterized by transmission electron microscopy, powder X-ray diffraction, attenuated total reflection fourier transform infrared spectroscopy, field emission scanning electron microscopy, vibrating sample magnetometer, and nitrogen adsorption-desorption analysis techniques. The results show that α-Fe₂O₃ phase transformed into Fe₃O₄ phase after annealing in hydrogen atmosphere at 350°C. The as-prepared spindle-like Fe₃O₄ mesoporous NPs possess high Brunauer-Emmett-Teller (BET) surface area up to ca. 7.9 m² g^-1. In addition, the Fe₃O₄ NPs present higher saturation magnetization (85.2 emu g^-1) and excellent magnetic response behaviors, which have great potential applications in magnetic separation technology.     

Research of mica/Fe<Subscript>3</Subscript>O<Subscript>4</Subscript> pearlescent pigment by co-precipitation

Experiments on preparation of mica/Fe₃O₄ pearlescent pigment were performed to discuss influences of several crucial parameters on final products. The samples were characterized by XRD, HRSEM, FTIR and color measurement, the content of Fe₃O₄ on the mica surface was also analyzed by XPS. It was found that the smoothness, compactness and colour deepness of the coating were influenced by different pH values and temperatures. The optimum preparation parameters of mica/Fe₃O₄ pearlescent pigment were obtained: the value of pH ≥ 9.2; the concentration of sodium hydroxide was 0.5 mol/l; the concentration ratio of Fe³⁺ to Fe²⁺ was 1.6 : 1; the velocity of magnetic stirring was 138 ≤ v ≤ 151 r/min; reaction temperature was 70–80°C; calcination temperature was 350°C and calcination time was 3 h.     

Preparation and characterization of hydrophilic polydopamine-coated Fe<Subscript>3</Subscript>O<Subscript>4</Subscript>/oxide graphene imprinted nanocomposites for removal of bisphenol A in waters

Bisphenol A (BPA), a known endocrine disruptor, is of global concern because it poses serious threats to the ecological environment and human health. In this work, hydrophilic polydopamine-coated Fe₃O₄/oxide graphene (IPDA@MGO) magnetic imprinted nanocomposites were prepared by the self-polymerization of dopamine on the surface of Fe₃O₄/GO in Tris-HCl buffer using BPA as a template for selective adsorption of BPA in water. IPDA@MGO showed specific recognition toward BPA with a high imprinting factor of 3.2 compared with nonimprinted polymer. The capacity of IPDA@MGO toward BPA was 41.2 mg/g and the adsorption reached equilibrium within 30 min. The adsorption agreed well with the Freundlich and pseudo-second order kinetic models. The good adsorption performance was attributed to the abundant binding sites and good dispersibility of IPDA@MGO nanocomposites derived from its excellent hydrophilicity. The nanocomposites could be removed rapidly by an external magnet and regenerated for repeated adsorption of BPA in water. The proposed method has potential applications for efficient removal of BPA in environmental waters.     

Infrared Signature of Novel Super-Thermite (Fe<Subscript>2</Subscript>O<Subscript>3</Subscript>/Mg) Fluorocarbon Nanocomposite for Effective Countermeasures of Infrared Seekers

Infrared (IR) guided missiles are real threat; they caused 90% of aircraft damage. Fluorocarbon polymer nanocomposite based on super-thermites can offer superior thermal signature to countermeasure IR guided missile seekers. This study reports on the sustainable fabrication of mono-dispersed colloidal Fe₂O₃ nanoparticles with 3 nm average particle size. Fe₂O₃ nanoparticles were dispersed in acetone for subsequent integration in fluorocarbon polymer. The impact of Fe₂O₃ content on thermal signature was evaluated using (FT-MIR 2–6 μm) spectrophotometer. Nanocomposite polymer with 8 wt% Fe₂O₃ offered an increase in the average intensity of α (2–3 μm) and β (4–5 μm) bands by 50 and 85% respectively to that of reference formulation. Quantification of stimulated emitting species in the combustion flame was conducted using ICT thermodynamic code. The developed nanothermite particles extended the primary reaction zone by 183%. Full discussions about combustion zones with associated exothermic chemical reactions have been represented.     

A Resumable Fluorescent Probe BHN-Fe<Subscript>3</Subscript>O<Subscript>4</Subscript>@SiO<Subscript>2</Subscript> Hybrid Nanostructure for Fe<Superscript>3+</Superscript> and its Application in Bioimaging

A multifunctional fluorescent probe BHN-Fe₃O₄@SiO₂ nanostructure for Fe³⁺ was designed and developed. It has a good selective response to Fe³⁺ with fluorescence quenching and can be recycled using an external magnetic field. With adding EDTA (2.5?×?10^?5 M) to the consequent product Fe³⁺-BHN-Fe₃O₄@SiO₂, Fe³⁺ can be removed from the complex, and its fluorescence probing ability recovers, which means that this constituted on-off type fluorescence probe could be reversed and reused. At the same time, the probe has been successfully applied for quantitatively detecting Fe³⁺ in a linear mode with a low limit of detection 1.25?×?10^?8 M. Furthermore, the BHN-Fe₃O₄@SiO₂ nanostructure probe is successfully used to detect Fe³⁺ in living HeLa cells, which shows its great potential in bioimaging detection.     

Modification of Cu/Zn/Al<Subscript>2</Subscript>O<Subscript>3</Subscript> Catalyst by Activated Carbon Based Metal Organic Frameworks as Precursor for Hydrogen Production

In this study, Cu/Zn/Al₂O₃-AC (AC?=?activated carbon) catalyst was synthesized and evaluated for dimethoxymethane (DMM) reformation to hydrogen. The Cu/Zn/Al₂O₃-AC catalyst was prepared using high surface area metal organic frameworks (MOFs) consisting of Cu₃(BTC)₂ (MOF-199) and Zn₄O(BDC)₃ (MOF-5) for Cu(II) and Zn(II) sources respectively, as precursors while γ-Al₂O₃ was applied as support. The synthesized catalyst was investigated by scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), Brunauer–Emmett–Teller analysis (BET), Temperature programmed desorption (NH₃-TPD) and Energy-dispersive X-ray spectroscopy (EDX) techniques. Complete DMM conversion was observed over Cu/Zn/Al₂O₃-AC catalyst (Cu:Zn:Al mole ratio of 6:3:2) under atmospheric pressure, T?=?533 K, GHSV?=?20 NL h^?1 g_cat^?1, N₂/H₂O/DMM?=?24/5/1 volume percent (vol%) with hydrogen productivity of 12.8 L H₂ h^?1 g_cat^?1 and 64% hydrogen concentration. Application of MOFs as precursors and modified activated carbon as an acidic component provided the catalyst with the porous structure and high specific surface area for the hydrolysis of DMM, subsequently, high selectivity and productivity of hydrogen was obtained.     

Low-Temperature Preparation of Superparamagnetic CoFe<Subscript>2</Subscript>O<Subscript>4</Subscript> Microspheres with High Saturation Magnetization

Based on a low-temperature route, monodispersed CoFe₂O₄ microspheres (MSs) were fabricated through aggregation of primary nanoparticles. The microstructural and magnetic characteristics of the as-prepared MSs were characterized by X-ray diffraction/photoelectron spectroscopy, scanning/transmitting electron microscopy, and vibrating sample magnetometer. The results indicate that the diameters of CoFe₂O₄ MSs with narrow size distribution can be tuned from over 200 to ~330 nm. Magnetic measurements reveal these MSs exhibit superparamagnetic behavior at room temperature with high saturation magnetization. Furthermore, the mechanism of formation of the monodispersed CoFe₂O₄ MSs was discussed on the basis of time-dependent experiments, in which hydrophilic PVP plays a crucial role.     

Mg(OH)<Subscript>2</Subscript> Films Prepared by Ink-Jet Printing and Their Photocatalytic Activity in CO<Subscript>2</Subscript> Reduction and H<Subscript>2</Subscript>O Conversion

Mg(OH)₂ films on Al substrates were fabricated by ink-jet printing, and they were applied as photocatalysts in solar fuels production (H₂ and CH₃OH) from CO₂ and H₂O conversion. The films were fabricated by means of a deposition of a solution composed of magnesium complex nanoparticles over aluminum foils, which were submitted to a heat treatment to promote the crystallization of Mg(OH)₂. The films were characterized by razing incidence X-ray diffraction (GZXD), Fourier-transform infrared spectroscopy (FTIR), Scanning electronic microscopy, X-ray photoelectron spectroscopy (XPS), and N₂ physisorption by BET method. The Mg(OH)₂ was detected in all the samples synthesized with 1 to 40 layers. According to XPS and FTIR analysis, it was detected the presence of carbonates related to Mg₃O(CO₃)₂ and Al⁰ and Al³⁺ due to the substrate. The highest photocatalytic activity was reached using 30 layers of Mg(OH)₂ for H₂ and CH₃OH generation, which it was 268 and 15 µmol g^??1h^??1, respectively. These results were associated to the presence of adequate amounts of MgO and Al₂O₃ that promote an efficient transfer of the photogenerated electrons between them. Furthermore, the formation of porous structures with high surface area and relative high roughness promoted an increase in the mass transport between the gas and liquid phase, which increase the effectiveness of the photocatalysts.     

Chitosan- and dehydroascorbic acid-coated Fe<Subscript>3</Subscript>O<Subscript>4</Subscript> nanoparticles: preparation,characterization and their potential as draw solute in forward osmosis process

Forward osmosis (FO) is a natural osmosis process that has attracted a significant attention due to its many advantages. However, the development of FO process depends on the development of proper draw solutions. In this work, chitosan (CS)-coated Fe₃O₄ nanoparticles and dehydroascorbic acid (DHAA)-coated Fe₃O₄ nanoparticles were successfully synthesized by co-precipitation method and their performance as draw solutes was investigated for application in FO systems. CS and DHAA could improve the surface hydrophilicity of the Fe₃O₄ nanoparticles. The synthesized nanoparticles were characterized by field emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), X-ray diffractometry (XRD), Fourier transform infrared spectroscopy (FTIR) and vibrating sample magnetometry (VSM) which the results presented a small size, crystalline morphology and high magnetization value for their structure as well as a good dispersion in water. Cellulose triacetate/cellulose acetate (CTA/CA)-based membranes were also prepared by immersion precipitation and used as FO membranes. The synthesized FO membranes were characterized by FESEM. The performance evaluation of synthesized nanoparticles revealed that the water flux of Fe₃O₄ nanoparticles capped with DHAA was higher than that of the chitosan-coated Fe₃O₄ nanoparticles. At the end of the process, the Fe₃O₄ nanoparticles were easily separated from the diluted draw solution by applying the magnetic field.     

Separation characteristics of tetrapropylammoniumbromide templating silica/alumina composite membrane in CO<Subscript>2</Subscript>/N<Subscript>2</Subscript>, CO<Subscript>2</Subscript>/H<Subscript>2</Subscript> and CH<Subscript>4</Subscript>/H<Subscript>2</Subscript> systems

Nanoporous silica membrane without any pinholes and cracks was synthesized by organic templating method. The tetrapropylammoniumbromide (TPABr)-templating silica sols were coated on tubular alumina composite support ( γ-Al₂O₃/ α-Al₂O₃ composite) by dip coating and then heat-treated at 550 °C. By using the prepared TPABr templating silica/alumina composite membrane, adsorption and membrane transport experiments were performed on the CO₂/N₂, CO₂/H₂ and CH₄/H₂ systems. Adsorption and permeation by using single gas and binary mixtures were measured in order to examine the transport mechanism in the membrane. In the single gas systems, adsorption characteristics on the α-Al₂O₃ support and nanoporous unsupport (TPABr templating SiO₂/ γ-Al₂O₃ composite layer without α-Al₂O₃ support) were investigated at 20–40 °C conditions and 0.0–1.0 atm pressure range. The experimental adsorption equilibrium was well fitted with Langmuir or/and Langmuir-Freundlich isotherm models. The α-Al₂O₃ support had a little adsorption capacity compared to the unsupport which had relatively larger adsorption capacity for CO₂ and CH₄. While the adsorption rates in the unsupport showed in the order of H₂> CO₂> N₂> CH₄ at low pressure range, the permeate flux in the membrane was in the order of H₂≫N₂> CH₄> CO₂. Separation properties of the unsupport could be confirmed by the separation experiments of adsorbable/non-adsorbable mixed gases, such as CO₂/H₂ and CH₄/H₂ systems. Although light and non-adsorbable molecules, such as H₂, showed the highest permeation in the single gas permeate experiments, heavier and strongly adsorbable molecules, such as CO₂ and CH₄, showed a higher separation factor (CO₂/H₂=5-7, CH₄/H₂=4-9). These results might be caused by the surface diffusion or/and blocking effects of adsorbed molecules in the unsupport. And these results could be explained by surface diffusion. This paper is dedicated to Professor Hyun-Ku Rhee on the occasion of his retirement from Seoul National University.