Poly (vinyl alcohol) hydrogels for pH dependent colon targeted drug delivery

Oral drug administration is convenient with pH dependent drug delivery system since the drug has to pass through different pH environments in gastro intestinal (GI) tract. The pH dependent swelling/shrinking behavior of hydrogel drug carrier controls the drug release without affecting the function of drug. pH dependent hydrogels of poly (vinyl alcohol) (PVA) were prepared by cross linking with maleic acid (MA). The hydrogels were characterized by attenuated total reflectance-Fourier transform infrared (ATR-FTIR) spectroscopy, DSC, porosimetry, SEM, TEM, biocompatibility study and by measuring their swelling behavior in water, simulated gastric fluid (SGF) and intestinal fluid (SIF). Swelling of the hydrogels was found to be highest in SIF (pH: 7.5) and lowest in SGF (pH: 1.2) resembling that required in colon targeted drug delivery systems. Since the swelling behavior of the gel is pH dependent, these hydrogels were studied for colon targeted drug delivery in an in-vitro set-up resembling the condition of GI tract. The ratio of PVA and MA in the hydrogel was varied to study the effect on the drug diffusion rate. For drug delivery study, vitamin B₁₂ and salicylic acid were used as model drugs. The hydrogel, loaded with model drugs vitamin B₁₂ and salicylic acid also demonstrated colon specific drug release with a relatively higher drug release in SIF (pH: 7.5) than that in SGF (pH: 1.2).     

Stimuli-responsive bacterial cellulose-g-poly(acrylic acid-co-acrylamide) hydrogels for oral controlled release drug delivery

This study evaluated the potential of stimuli-responsive bacterial cellulose-g-poly(acrylic acid-co-acrylamide) hydrogels as oral controlled-release drug delivery carriers. Hydrogels were synthesized by graft copolymerization of the monomers onto bacterial cellulose (BC) fibers by using a microwave irradiation technique. The hydrogels were characterized by Fourier transform infrared (FT-IR) spectroscopy, X-ray diffraction (XRD), thermogravimetric analysis (TGA) and scanning electron microscopy (SEM). FT-IR spectroscopy confirmed the grafting. XRD showed that the crystallinity of BC was reduced by grafting, whereas an increase in the thermal stability profile was observed in TGA. SEM showed that the hydrogels exhibited a highly porous morphology, which is suitable for drug loading. The hydrogels demonstrated a pH-responsive swelling behavior, with decreased swelling in acidic media, which increased with increase in pH of the media, reaching maximum swelling at pH 7. The release profile of the hydrogels was investigated in simulated gastric fluid (SGF) and simulated intestinal fluid (SIF). The hydrogels showed lesser release in SGF than in SIF, suggesting that hydrogels may be suitable drug carriers for oral controlled release of drug delivery in the lower gastrointestinal tract.     

超声辅助合成多孔pH敏感性海藻酸钠水凝胶及其控释行为

利用超声波辅助接枝聚合制备多孔NaAlg-g-P(NVP-co-NHMAA)水凝胶,利用傅里叶红外光谱(FT-IR)、热重分析(TGA)和扫描电镜(SEM)对NaAlg-g-P(NVP-co-NHMAA)的结构和形态进行了表征,同时还研究了NaAlg-g-P(NVP-coNHMAA)的溶胀行为和pH敏感性。以5-氟尿嘧啶(5-FU)作为模型药物,研究了NaAlg-g-P(NVP-co-NHMAA)水凝胶在模拟胃液(SGF,pH=1.2)和模拟肠液(SIF,pH=7.4)下的控制释放行为,结果显示,在pH=7.4时,11h内该水凝胶的累积释放率高达80.2%,而在pH=1.2时只有50.2%,这表明NaAlg-g-P(NVP-co-NHMAA)水凝胶可以作为结肠靶向药物输送载体。     

In vitro release dynamics of model drugs from psyllium and acrylic acid based hydrogels for the use in colon specific drug delivery

Psyllium is medicinally important gel forming polysaccharides. Keeping in view, the pharmacological importance of psyllium and drug delivery devices based on hydrogels, psyllium, if suitably tailored to prepare the hydrogels, can act as the double potential candidates for the novel drug delivery systems. Therefore, it is an attempt to prepared psyllium and acrylic acid based pH sensitive novel hydrogels by using N,N'-methylenebisacrylamide (N,N-MBAAm) as crosslinker and ammonium persulfate (APS) as initiator for the use in colon specific drug delivery. The present paper discusses the swelling kinetics of the hydrogels and release dynamics of model drugs (tetracycline hydrochloride, insulin and tyrosine) from drug-loaded hydrogels, for the evaluation of the swelling mechanism and drug release mechanism from the polymeric networks .The effect of pH on the swelling kinetics and release pattern of drugs have been studied by varying the pH of the release medium. It has been observed that swelling and release of drugs from the hydrogels occurred through non-Fickian or anomalous diffusion mechanism in distilled water and pH 7.4 buffer. It shows that the rate of polymer chain relaxation and the rate of drug diffusion from these hydrogels are comparable.     

PVA/P(AA-AM)复合水凝胶的制备及性能

采用水溶液聚合方法合成了不同组成的丙烯酸-丙烯酰胺共聚物(P(AA-AM))。将聚乙烯醇(PVA)与所合成的P(AA-AM)共混,以戊二醛为交联剂,制备出了不同结构的PVA/P(AA-AM)复合水凝胶。采用扫描电镜观察了凝胶形貌,研究了复合水凝胶的结构与性能关系。结果表明,复合水凝胶溶胀性能与所用交联剂加量有关,复合水凝胶的溶胀度随着交联剂加量增加先增大后减小,在交联剂加量为0.5%时水凝胶溶胀度达到最大值。复合凝胶中的聚合物组成对溶胀度影响显著,随着P(AA-AM)含量提高,水凝胶的溶胀度逐渐增大。适当结构的复合水凝胶具有pH敏感性,敏感程度随着凝胶中P(AA-AM)含量的增加而增强。     

Albumin-crosslinked alginate hydrogels as sustained drug release carrier

To take advantage of the drug-binding ability of albumin as a component of drug delivery system, we have prepared hydrogels consisting of alginic acid (AL) and recombinant human serum albumin (rHSA) by dehydrating condensation using N-hydroxysuccininimide and 1-ethyl-3-(3-dimethylaminopropyl)carbodiimide. As rHSA content increased, the swelling ratio of the hydrogel decreased, indicating rHSA functioned as a crosslinker. In fact, trypsin treatment solubilized the hydrogel. Salicylic acid, which has high affinity for rHSA, was loaded most on the hydrogel of the highest rHSA content despite the lowest swelling ratio. Meanwhile, drugs with less affinity for HSA such as o-anisic acid and benzoic acid were preferably loaded on the hydrogel having the highest swelling ratio but the lowest HSA content. The release of salicylic acid from the hydrogel sustained longer than o-anisic acid and benzoic acid, reflecting the affinity of the drug for HSA. Furthermore, the hydrogel could carry much of positively charged dibucaine by the interaction with anionic alginic acid and showed highly sustained release. Since the safety of AL and rHSA in medical use is guaranteed, rHSA-crosslinked AL hydrogel is expected to use as a sustained drug release carrier for drugs having affinity for HSA and those with cationic charge.     

Development and characterization of coated-microparticles based on whey protein/alginate using the Encapsulator device

The aim of this study is to prepare whey protein (WP)-based microparticles (MP) using the Encapsulator^® device. The viscosity dependence of the extrusion device required to mix WP with a food-grade and less viscous polymer. Mixed WP/ALG MP were obtained with the optimized WP/alginate (ALG) ratio (62/38). These particles were further coated with WP or ALG using non-traumatic and solvent-free coating process developed in this study. Size and morphology of coated and uncoated MP were determined. Then, swelling and degradation (WP release) of formulations were investigated in pH 1.2 and 7.5 buffers and in simulated gastric and intestinal fluids (SGF, SIF) and compared to pure ALG and pure WP particle behaviours. At pH 1.2, pure ALG shrank and pure WP swelled, whereas the sizes of mixed WP/ALG matrix were stable. In SGF, WP/ALG MP resisted to pepsin degradation compare to pure WP particles due to ALG shrinkage which limited pepsin diffusion within particles. Coating addition with WP or ALG slowed down pepsin degradation. At pH 7.5, WP/ALG particles were rapidly degraded due to ALG sensitivity but the addition of a WP coating limited effectively the swelling and the degradation of MP. In SIF, pancreatin accelerated MP degradation but ALG-coated MP exhibited interesting robustness. These results confirmed the interest and the feasibility to produce coated WP-based MP which could be a potential orally controlled release drug delivery system.     

Development of pH sensitive polyacrylamide grafted pectin hydrogel for controlled drug delivery system

In the present study an attempt was made to graft polyacrylamide on pectin. The grafted polymer was characterized by FTIR spectroscopy, differential scanning calorimetry and X-ray diffraction. Rheological property of pectin solution was compared with the product solution. The grafted polymer was cross-linked with varying amount of glutaraldehyde. The swelling properties of the cross-linked product were also studied. The salicylic acid, an antipyretic drug, was incorporated in the cross-linked gel as a model drug and the drug release studies were done in a modified Franz’s diffusion cell. The effect of cross-linking density on the release property of salicylic acid was studied through the cross-linked product. The product showed better film forming property and gelling property than pectin. The comparative rheological properties of pectin and grafted copolymer indicated change in the property of the product. FTIR studies indicated incorporation of amide group. Differential scanning calorimetry and XRD suggested formation of a new polymer. Swelling study indicated pH dependent swelling of the cross-linked hydrogel. Salicylic acid release indicated pH dependent release from the hydrogel.     

壳聚糖透明质酸复合水凝胶的制备及性能

用零长度的1-乙基-(3-二甲基氨基丙基)碳二亚胺盐酸盐(EDC·HCl)和N-羟基丁二酰亚胺(NHS)作为偶联剂和稳定剂制备了壳聚糖基透明质酸复合水凝胶,探讨了溶液pH值对该类水凝胶溶胀性的影响。溶液的pH在4.0时,该类水凝胶的溶胀率最低,升高和降低溶液的pH,该类水凝胶的溶胀率均升高,文中还对水凝胶的降解率进行了研究,实验发现,交联后的水凝胶具有一定的稳定性。包埋在此水凝胶中的牛血清蛋白(BSA)释放随载药介质pH值的变化而显著不同,pH 7.4条件下载药的水凝胶释药率大于pH 1.2条件下的释药率。因此,具有pH敏感性的壳聚糖透明质酸复合水凝胶在药物运输领域具有潜在的应用。     

Preparation and characterization of hybrid pH-sensitive hydrogels of chitosan-co-acrylic acid for controlled release of verapamil

In the present work crosslinked hydrogels based on chitosan (CS) and acrylic acid (AA) were prepared by free radical polymerization with various feed compositions using N,N methylenebisacrylamide (MBA) as crosslinking agent. Benzoyl peroxide was used as catalyst. Fourier transform infrared spectra (FTIR) confirmed the formation of the crosslinked hydrogels. This hydrogel is formed due to electrostatic interaction between cationic groups in CS and anionic groups in AA. Prepared hydrogels were used for dynamic and equilibrium swelling studies. For swelling behavior, effect of pH, polymeric and monomeric compositions and degree of crosslinking were investigated. Swelling studies were performed in USP phosphate buffer solutions of varying pH 1.2, 5.5, 6.5 and 7.5. Results showed that swelling increased by increasing AA contents in structure of hydrogels in solutions of higher pH values. This is due to the presence of more carboxylic groups available for ionization. On the other hand by increasing the chitosan content swelling increased in a solution of acidic pH, but this swelling was not significant and it is due to ionization of amine groups present in the structure of hydrogel. Swelling decreased with increase in crosslinking ratio owing to tighter hydrogel structure. Porosity and sol-gel fraction were also measured. With increase in CS and AA contents porosity and gel fraction increased, whereas by increasing MBA content porosity decreased and gel fraction increased. Furthermore, diffusion coefficient (D) and the network parameters i.e., the average molecular weight between crosslinks (M_c), polymer volume fraction in swollen state (V_2s), number of repeating units between crosslinks (M_r) and crosslinking density (q) were calculated using Flory-Rehner theory. Selected samples were loaded with a model drug verapamil. Release of verapamil depends on the ratios of CS/AA, degree of crosslinking and pH of the medium. The release mechanisms were studied by fitting experimental data to model equations and calculating the corresponding parameters. The result showed that the kinetics of drug release from the hydrogels in both pH 1.2 and 7.5 buffer solutions was mainly non-Fickian diffusion.     

Evaluation of Polyvinyl Alcohol Hydrogel as Sustained-Release Vehicle for Transdermal Sytem of Bunitrolol-HCL

In order to evaluate a bunitrolol (β-blocker preparation using poly(vinyl alchol) (PVA) hydrogel for hypertension as a transdermal delivery system, in vitro release characteristics and the permeation of bunitrolol through rat sking from hydrogel and the bunitrolol plasma profile after application onto abdominal skin in rats were examined. The PVA hydrogel containing bunitrolol-HCl was prepared by a low temperature crystallization method. The release of bunitrolol from PVA hydrogel followed with Ficklan diffusion (Higuchi model); the drug relaase, profile versus square root of relase. The release rate and premeation through rat skins of bunitrolol from hydrogels affected with preparation at various physical and chemical states. Longer freezing times, higher polymerization and higher concentration of PVA resulted in lower permeation. These results had relations with the results of release tests. Higher pH of preparation resulted in a higher permeation of bunitrolol, which did not have a relaion with the results of release tests. The plasma concentration of bunitrolol after application of hydrogel preparation onto the abdominal skins were relatively high at early times and sustained a plateau level during 48 h in rates. In conclusion, transdermal delivery system using PVA hydrogel is favorable with prolonged action for low available drugs such as bunitrolol-HCl.     

FTIR spectroscopy characterization of poly (vinyl alcohol) hydrogel with different hydrolysis degree and chemically crosslinked with glutaraldehyde

In this work, poly (vinyl alcohol) (PVA) hydrogels with different degree of hydrolysis (DH) were prepared by chemical crosslinking with glutaraldehyde (GA). The nanostructure of the resulting hydrogels was investigated by Fourier Transform Infrared Spectroscopy (FTIR) and Synchrotron small-angle X-ray scattering characterization (SAXS). In vitro tests were performed by swelling ratio assays in different pH solutions. The infrared spectra of the crosslinked PVA showed absorption bands of the acetal bridges resulted from the reaction of the GA with the OH groups from PVA. Also the FTIR spectroscopy was used to determine the crystallinity of the PVA film based on the relative intensity of the vibration band at 1141 cm^− 1. The results have showed an increase of hydrogel crystallinity with higher DH of PVA. SAXS patterns have clearly indicated important modifications on the PVA semicrystalline structure when it was crosslinked by GA. The swelling ratio was significantly reduced by chemically crosslinking the PVA network. PVA-derived hydrogel with chemically modified network was found to be pH-sensitive, indicating a high potential to be used in drug delivery polymer system.     

Formulation development and in-vitro/in-vivo correlation for a novel sterculia gum-based oral colon-targeted drug delivery system of azathioprine

The present study was aimed at designing a microflora triggered colon-targeted drug delivery system (MCDDS) based on swellable polysaccharide, sterculia gum in combination with biodegradable polymers with a view to target azathioprine (AZA) in the colon for the treatment of IBD with reduced systemic toxicity. The microflora degradation study of gum was investigated in rat cecal medium. The polysaccharide tablet was coated to different film thicknesses with blends of chitosan/Eudragit RLPO and over coated with Eudragit L00 to provide acid and intestinal resistance. Swelling and drug release studies were carried out in simulated gastric fluid (SGF) (pH 1.2), simulated intestinal fluid (SIF) (pH 6.8) and simulated colonic fluid (SCF) (pH 7.4 under anaerobic environment), respectively. Drug release study in SCF revealed that swelling force of the gum could concurrently drive the drug out of the polysaccharide core due to the rupture of the chitosan/Eudragit coating in microflora-activated environment. Chitosan in the mixed film coat was found to be degraded by enzymatic action of the microflora in the colon. Release kinetic data revealed that, the optimized MCDDS was fitted well into first order model and apparent lag time was found to be 6?h, followed by Higuchi spherical matrix release. The degradation of chitosan was the rate-limiting factor for drug release in the colon. In-vivo study in rabbit shows delayed T_max, prolonged absorption time, decreased C_max and absorption rate constant (K_a) indicating reduced systemic toxicity of the drug as compared to other dosage forms.     

Poly (vinyl alcohol)/poly (acrylamide‐ co ‐diallyldimethyl ammonium chloride) semi‐IPN hydrogels for ciprofloxacin hydrochloride drug delivery

Herein, the authors developed a new and potential semi‐interpenetrating polymer network (semi‐IPN) hydrogels of poly vinyl alcohol (PVA), acryl amide and diallyldimethyl ammonium chloride employing chemical cross‐linker N, N''‐methylene bisacrylamide (NNMBA) and ammonium persulphate as an initiator by radical polymerisation. To analyse the copolymer formation between two monomers and IPN cross‐linking reaction, the resulting hydrogel was characterised by Fourier transform infrared spectroscopy and the surface morphology was analysed using scanning electron microscopy. Differential scanning calorimetry and X‐ray diffraction studies were also carried out for investigating drug loading and distribution and swelling experiments were carried out for the uptake of water. In vitro release of ciprofloxacin hydrochloride from hydrogel was performed at intestinal conditions. The amount of PVA, NNMBA and total monomer concentration was found to strongly control the drug release behaviour from the hydrogels.Inspec keywords: hydrogels, polymer blends, biomedical materials, drug delivery systems, polymerisation, Fourier transform infrared spectra, surface morphology, scanning electron microscopy, differential scanning calorimetry, X‐ray diffraction, swelling, biological organs, ammonium compoundsOther keywords: PVA‐poly(acrylamide‐co‐diallyldimethyl ammonium chloride) semiIPN hydrogels, ciprofloxacin hydrochloride drug delivery, semiinterpenetrating polymer network hydrogels, polyvinyl alcohol, acryl amide, diallyldimethyl ammonium chloride, chemical crosslinker N,N''‐methylene bisacrylamide, ammonium persulphate, radical polymerisation initiator, NNMBA, copolymer formation, IPN crosslinking reaction, Fourier transform infrared spectroscopy, surface morphology, scanning electron microscopy, differential scanning calorimetry, X‐ray diffraction, drug loading, drug distribution, swelling, water uptake, in vitro ciprofloxacin hydrochloride release, intestinal conditions, total monomer concentration, drug release behaviour     

Synthesis and characterization of carboxymethyl chitosan hydrogel: Application as site specific delivery for lercanidipine hydrochloride

In the present study, carboxymethylchitosan (CMCS) was prepared from chitosan, crosslinked with glutaraldehyde and evaluated in vitro as a potential carrier for site specific drug delivery of lercanidipine hydrochloride (LERH). LERH was incorporated at the time of crosslinking of CMCS. The chitosan was evaluated for its degree of deacetylation (DD) and average molecular weight, which were found to be 84·6% and 3·5 × 10⁴ Da, respectively. The degree of substitution on prepared CMCS was found to be 0·68. All hydrogel formulations showed more than 86% and 77% yield and drug loading, respectively. The swelling behaviour of prepared hydrogels were checked in different pH values, 1·2, 6·8 and 7·4, indicated pH responsive swelling characteristic with very less swelling at pH 1·2 and quick swelling at pH 6·8 followed by linear swelling at pH 7·4 with slight increase. In vitro release profile was carried out at the same conditions as in swelling and drug release was found to be dependent on swelling of hydrogels and showed biphasic release pattern with non-fickian diffusion kinetics at higher pH. The carboxymethylation of chitosan, entrapment of drug and its interaction in prepared hydrogels were checked by FTIR, ¹H-NMR, DSC and p-XRD studies, which confirmed formation of CMCS from chitosan and absence of any significant chemical change in LERH after being entrapped in crosslinked hydrogel formulations. The surface morphology of formulation S6 was checked before and after dissolution, revealed open channel like pores formation after dissolution.     

Hybrid Hydrogel-Magnet Actuators with pH-Responsive Hydrogels for Gastrointestinal Microrobots

Limited space on millimeter-scale devices for biomedical applications makes it challenging to incorporate bulky actuators and power for onboard mechanical actuation. Stimuli-responsive hydrogels, such as pH-responsive hydrogels, provide a solution to automatically sense and actuate in the gastrointestinal tract. However, hydrogels are often nonload bearing and slow in actuation. To overcome these challenges, a new type of hybrid actuator is developed which utilizes a pH-responsive hydrogel with magnets to trigger magnetic springs (i.e., permanent magnets with repulsive, spring-like forces) to quickly initiate rotational and translational movements at pH > 6. The agar-poly(acrylic acid) hydrogel undergoes a large volume transition at pH > 6 and exhibits large nominal blocking stress of 610–819 kPa for a 3–4 mm diameter cylinder hydrogel. Moreover, the scaling of hydrogel force and response times are experimentally confirmed. Based on the hydrogel properties, an analytical hydrogel model is developed to predict hydrogel force and displacement under varying magnetic loads and wall constraints in simulated gastric fluid (SGF, pH 1.2) and simulated intestinal fluid (SIF, pH 6.8), and the experimental data validate the model. Finally, an innovative hybrid hydrogel-magnet actuator that triggers rotational and translational motion without external activation is demonstrated.     

Preparation and characterization of magnetic alginate-chitosan hydrogel beads loaded matrine

The aim of this study was to use alginate-chitosan (Alg-CS) hydrogel beads for developing an oral water-soluble drug delivery system, occupying pH-sensitive property and superparamagnetic. Matrine as a model drug was loaded in Alg-CS hydrogel beads to study the release character of the delivery system. The amount of matrine released from the beads was relatively low in pH 2.5 over 8?h (34.90%), but nearly all of the initial drug content was released in simulated intestinal fluid (SIF, pH 6.8) within 8?h. The results demonstrated that Alg-CS hydrogel beads possess unique pH-dependent swelling behaviors. In addition, the magnetic beads were characterized by Fourier transform infrared spectroscopy, scanning electron microscope, X-ray diffractometry and vibrating-sample magnetometry. Magnetometer measurements data suggested that Alg-CS beads also had superparamagnetic property as well as fast magnetic response. It can be expected that the beads can deliver and release encapsulated anticancer agent at the tumor by the weak magnetic field, and hence could be potential candidates as an orally administered drug delivery system.     

Development of polysaccharide-based colon targeted drug delivery systems for the treatment of amoebiasis

The main focus of this study is to develop colon targeted drug delivery systems for metronidazole (MTZ). Tablets were prepared using various polysaccharides or indigenously developed graft copolymer of methacrylic acid with guar gum (GG) as a carrier. Various polysaccharides such as GG, xanthan gum, pectin, carrageenan, β-cyclodextrin (CD) or methacrylic acid-g-guar (MAA-g-GG) gum have been selected and evaluated. The prepared tablets were tested in vitro for their suitability as colon-specific drug delivery systems. To further improve the colon specificity, some selected tablet formulations were enteric coated with Eudragit-L 100 to give protection in an acidic environment. Drug release studies were performed in simulated gastric fluid (SGF) for 2 hr followed by simulated intestinal fluid (SIF) at pH 7.4. The dissolution data demonstrate that the rate of drug release is dependent upon the nature and concentration of polysaccharide/polymer used in the formulations. Uncoated tablets containing xanthan gum or mixture of xanthan gum with graft copolymer showed 30-40% drug release during the initial 4-5 hr, whereas for tablets containing GG with the graft copolymer, it was 70%. After enteric coating, the release was drastically reduced to 18-24%. The other polysaccharides were unable to protect drug release under similar conditions. Preparations with xanthan gum as a matrix showed the time-dependent release behavior. Further, in vitro release was performed in the dissolution media with rat caecal contents. Results indicated an enhanced release when compared to formulations studied in dissolution media without rat caecal contents, because of microbial degradation or polymer solubilization. The nature of drug transport was found to be non-Fickian in case of uncoated formulations, whereas for the coated formulations, it was found to be super-Case-II. Statistical analyses of release data indicated that MTZ release is significantly affected by the nature of the polysaccharide used and enteric coating of the tablet. Differential scanning calorimetry indicated the presence of crystalline nature of drug in the formulations.     

Preparation and characterization of magnetic alginate-chitosan hydrogel beads loaded matrine

The aim of this study was to use alginate-chitosan (Alg-CS) hydrogel beads for developing an oral water-soluble drug delivery system, occupying pH-sensitive property and superparamagnetic. Matrine as a model drug was loaded in Alg-CS hydrogel beads to study the release character of the delivery system. The amount of matrine released from the beads was relatively low in pH 2.5 over 8?h (34.90%), but nearly all of the initial drug content was released in simulated intestinal fluid (SIF, pH 6.8) within 8?h. The results demonstrated that Alg-CS hydrogel beads possess unique pH-dependent swelling behaviors. In addition, the magnetic beads were characterized by Fourier transform infrared spectroscopy, scanning electron microscope, X-ray diffractometry and vibrating-sample magnetometry. Magnetometer measurements data suggested that Alg-CS beads also had superparamagnetic property as well as fast magnetic response. It can be expected that the beads can deliver and release encapsulated anticancer agent at the tumor by the weak magnetic field, and hence could be potential candidates as an orally administered drug delivery system.     

Oral controlled release formulation for highly water-soluble drugs: drug--sodium alginate--xanthan gum--zinc acetate matrix

An oral controlled release formulation matrix for highly water-soluble drugs was designed and developed to achieve a 24-hour release profile. Using ranitidine HCl as a model drug, sodium alginate formulation matrices containing xanthan gum or zinc acetate or both were investigated. The caplets for these formulations were prepared by direct compression and the in vitro release tests were carried out in simulated intestinal fluid (SIF, pH7.5) and simulated gastric fluid (SGF, pH1.2). The release of the drug in the sodium alginate formulation containing only xanthan gum completed within 12 hours in the SIF, while the drug release in the sodium alginate formulation containing only zinc acetate finished almost within 2 hours in the same medium. Only the sodium alginate formulation containing both xanthan gum and zinc acetate achieved a 24-hour release profile, either in the SIF or in the pH change medium. In the latter case, the caplet released in the SGF for 2 hours was immediately transferred into the SIF to continue the release test. The results showed that the presence of both xanthan gum and zinc acetate in sodium alginate matrix played a key role in controlling the drug release for 24 hours. The helical structure and high viscosity of xanthan gum might prevent zinc ions from diffusing out of the ranitidine HCl-sodium alginate-xanthan gum-zinc acetate matrix so that zinc ions could react with sodium alginate to form zinc alginate precipitate with a cross-linking structure. The cross-linking structure might control a highly water-soluble drug to release for 24 hours. Evaluation of the release data showed the release mechanism for the novel formulation might be attributed to the diffusion of the drug.