Experimental and theoretical analysis of element mercury adsorption on Fe<Subscript>3</Subscript>O<Subscript>4</Subscript>/Ag composites

A novel magnetic nano-sorbent Fe₃O₄/Ag was synthesized and applied to capture the elemental mercury from the simulated flue gas. The morphology, components and crystal phase of the sorbents were characterized by transmission electron microscope (TEM), energy dispersive spectrometry (EDS) and X-ray diffraction (XRD), respectively. The mercury removal performance of the sorbents was investigated through the fixed-bed tests. The results indicated that silver was successfully loaded on the surface of Fe₃O₄ particles, which could significantly enhance the Hg⁰ removal performance of the sorbents. Flue gas components, including CO₂, SO₂, and NO, have little impact on the Hg⁰ removal performance of Fe₃O₄/Ag sorbents, while O₂ has a slightly positive effect. The Hg⁰ removal efficiency decreased with the increasing of temperature, Hg⁰ inlet concentration and gas hourly space velocity. Only one broad mercury desorption peak at approximately 210 °C could be observed during the temperature-programmed desorption (TPD) process, which indicated that mercury species existing on the surface of Fe₃O₄/Ag sorbents might be elemental mercury instead of oxidized mercury. Furthermore, the reusability tests showed that the Fe₃O₄/Ag sorbents could be efficiently regenerated and reused. Finally, the theoretical analysis based on the DFT method showed that a weak chemisorption of Hg⁰ on Fe₃O₄ sorbents changed to a strong chemisorption when silver was loaded. The results of theoretical analysis conformed to the experiments results well.     

Recyclable Fe<Subscript>3</Subscript>O<Subscript>4</Subscript>@Tween20@Ag Nanocatalyst for Catalytic Degradation of Azo Dyes

Silver nanoparticles supported on superparamagnetic iron oxide (SPION)-Tween20 nanocomposite were prepared by a combined polyol and chemical reduction routes. The morphology, composition and structure of Fe₃O₄@Tween20@Ag nanocatalyst were characterized by Fourier transform infrared spectroscopy (FT-IR), scanning electron microscopy, energy dispersive X-ray spectroscopy, thermal gravimetric analyzer, and X-ray powder diffraction. In addition the magnetic properties were evaluated with vibrating sample magnetometry. It was found that Fe₃O₄@Tween20@Ag nanocatalyst could catalyze the degradation of various organic azo dyes and could easily be recovered from the reaction medium with external magnet. Also, the magnetic catalyst can be succesfully recycled and reused for at least five successive degradation cycles of methyl orange, methylene blue and Rhodamine B, confirming a high recycling efficiency. The cost effective and recyclable Fe₃O₄@Tween20@Ag nanocatalyst provide an novel nanomaterials architecture for environmental remediation applications.     

Removal characteristics of chromium by activated carbon/CoFe<Subscript>2</Subscript>O<Subscript>4</Subscript> magnetic composite and <Emphasis Type="Italic">Phoenix dactylifera</Emphasis> stone carbon

Activated carbon (AC) was synthesized from Phoenix dactylifera stones and then modified by CoFe₂O₄ magnetic nanocomposite for use as a Cr(VI) adsorbent. Both AC/CoFe₂O₄ composite and AC were fully characterized by FTIR, SEM, XRD, TEM, TGA, and VSM techniques. Based on the surface analyses, the addition of CoFe₂O₄ nanoparticles had a significant effect on the thermal stability and crystalline structure of AC. Factors affecting chromium removal efficiency like pH, dosage, contact time, temperature, and initial Cr(VI) concentration were investigated. The best pH was found 2 and 3 for Cr adsorption by AC and AC/CoFe₂O₄ composite, respectively. The presence of ion sulfate had a greater effect on the chromium sorption efficiency than nitrate and chlorine ions. The results illustrated that both adsorbents can be used up to seven times to adsorb chromium. The adsorption process was examined by three isothermal models, and Freundlich was chosen as the best one. The experimental data were well fitted by pseudo-second-order kinetic model. The half-life (t_1/2) of hexavalent chromium using AC and AC/CoFe₂O₄ magnetic composite was obtained as 5.18 min and 1.52 min, respectively. Cr(VI) adsorption by AC and AC/CoFe₂O₄ magnetic composite was spontaneous and exothermic. In general, our study showed that the composition of CoFe₂O₄ magnetic nanoparticles with AC can increase the adsorption capacity of AC from 36mg/L to 70mg/L.     

Chitosan- and dehydroascorbic acid-coated Fe<Subscript>3</Subscript>O<Subscript>4</Subscript> nanoparticles: preparation,characterization and their potential as draw solute in forward osmosis process

Forward osmosis (FO) is a natural osmosis process that has attracted a significant attention due to its many advantages. However, the development of FO process depends on the development of proper draw solutions. In this work, chitosan (CS)-coated Fe₃O₄ nanoparticles and dehydroascorbic acid (DHAA)-coated Fe₃O₄ nanoparticles were successfully synthesized by co-precipitation method and their performance as draw solutes was investigated for application in FO systems. CS and DHAA could improve the surface hydrophilicity of the Fe₃O₄ nanoparticles. The synthesized nanoparticles were characterized by field emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), X-ray diffractometry (XRD), Fourier transform infrared spectroscopy (FTIR) and vibrating sample magnetometry (VSM) which the results presented a small size, crystalline morphology and high magnetization value for their structure as well as a good dispersion in water. Cellulose triacetate/cellulose acetate (CTA/CA)-based membranes were also prepared by immersion precipitation and used as FO membranes. The synthesized FO membranes were characterized by FESEM. The performance evaluation of synthesized nanoparticles revealed that the water flux of Fe₃O₄ nanoparticles capped with DHAA was higher than that of the chitosan-coated Fe₃O₄ nanoparticles. At the end of the process, the Fe₃O₄ nanoparticles were easily separated from the diluted draw solution by applying the magnetic field.     

Synthesis and Characterization of Ferromagnetic BaFe<Subscript>2</Subscript>O<Subscript>4</Subscript> Nanocrystals Using Novel Ionic Precursor Complex [Fe(opd)<Subscript>3</Subscript>]<Subscript>2</Subscript>[Ba(CN)<Subscript>8</Subscript>]

The following investigation reports the synthesis of novel complex [Fe(opd)₃]₂[Ba(CN)₈] and preparation of BaFe₂O₄ nanoparticles through thermal decomposition without using any surfactant. The complex was characterized via Furrier transform infrared spectroscopy (FT-IR), ultra violet-visible spectroscopy (UV–vis), conductivity measurement and elemental analysis. The synthesized crystals of inorganic precursor complex was transferred to furnace, where they were calcined under normal atmosphere condition at 900 °C for 4 h. Formation of BaFe₂O₄ was supported by FT-IR and energy-dispersive X-ray analysis. Hexagonal structure of nano-oxide was confirmed on powder X-ray diffraction. Furthermore, uniform morphology of nanocrystals were reported by scanning electron microscopy. The saturation magnetization (22 emu/g), remanent magnetization (6 emu/g) and coercivity (400 Oe) reported on vibrating sample magnetometer curve illustrates the promising industrial and medicinal applications of prepared mixed oxide.     

Preparation and characterization of spindle-like Fe<Subscript>3</Subscript>O<Subscript>4</Subscript> mesoporous nanoparticles

Magnetic spindle-like Fe₃O₄ mesoporous nanoparticles with a length of 200 nm and diameter of 60 nm were successfully synthesized by reducing the spindle-like α-Fe₂O₃ NPs which were prepared by forced hydrolysis method. The obtained samples were characterized by transmission electron microscopy, powder X-ray diffraction, attenuated total reflection fourier transform infrared spectroscopy, field emission scanning electron microscopy, vibrating sample magnetometer, and nitrogen adsorption-desorption analysis techniques. The results show that α-Fe₂O₃ phase transformed into Fe₃O₄ phase after annealing in hydrogen atmosphere at 350°C. The as-prepared spindle-like Fe₃O₄ mesoporous NPs possess high Brunauer-Emmett-Teller (BET) surface area up to ca. 7.9 m² g^-1. In addition, the Fe₃O₄ NPs present higher saturation magnetization (85.2 emu g^-1) and excellent magnetic response behaviors, which have great potential applications in magnetic separation technology.     

Low-Temperature Preparation of Superparamagnetic CoFe<Subscript>2</Subscript>O<Subscript>4</Subscript> Microspheres with High Saturation Magnetization

Based on a low-temperature route, monodispersed CoFe₂O₄ microspheres (MSs) were fabricated through aggregation of primary nanoparticles. The microstructural and magnetic characteristics of the as-prepared MSs were characterized by X-ray diffraction/photoelectron spectroscopy, scanning/transmitting electron microscopy, and vibrating sample magnetometer. The results indicate that the diameters of CoFe₂O₄ MSs with narrow size distribution can be tuned from over 200 to ~330 nm. Magnetic measurements reveal these MSs exhibit superparamagnetic behavior at room temperature with high saturation magnetization. Furthermore, the mechanism of formation of the monodispersed CoFe₂O₄ MSs was discussed on the basis of time-dependent experiments, in which hydrophilic PVP plays a crucial role.     

Characterization of Fischer–Tropsch Cobalt-Based Catalytic Systems (Co/SiO<Subscript>2</Subscript> and Co/Al<Subscript>2</Subscript>O<Subscript>3</Subscript>) by X-ray Diffraction and Magnetic Measurements

Results of the characterization of six Co-based Fischer–Tropsch (FT) catalysts, with 15% Co loading and supported on SiO₂ and Al₂O₃, are presented. Room temperature X-ray diffraction (XRD), temperature and magnetic field (H) variation of the magnetization (M), and low-temperature (5 K) electron magnetic resonance (EMR) are used for determining the electronic states (Co⁰, CoO, Co₃O₄, Co²⁺) of cobalt. Performance of these catalysts for FT synthesis is tested at reaction temperature of 240 °C and pressure of 20 bars. Under these conditions, 15% Co/SiO₂ catalysts yield higher CO and syngas conversions with higher methane selectivity than 15% Co/Al₂O₃ catalysts. Conversely the Al₂O₃ supported catalysts gave much higher selectivity towards olefins than Co/SiO₂. These results yield the correlation that the presence of Co₃O₄ yield higher methane selectivity whereas the presence of Co²⁺ species yields lower methane selectivity but higher olefin selectivity. The activities and selectivities are found to be stable for 55 h on-stream.     

Modification of Mg<Subscript>3</Subscript>Si<Subscript>2</Subscript>O<Subscript>5</Subscript>(OH)<Subscript>4</Subscript> nanotubes by magnetite nanoparticles

The magnetite nanoparticles and nanocomposite “Nanotube of hydrosilicate Mg—magnetite nanoparticles—Mg-ChR-NT/Fe₃O₄-NP” were obtained by coprecipitation. The composition of the synthesized samples has been established by X-ray diffraction. Using transmission electron microscopy, the presence of magnetite nanoparticles has been detected both inside the NTs and at the external surface of the NT walls. The specific surface of the NTs, nanoparticles, and composite is determined.     

Catalytic properties of Co<Subscript>3</Subscript>O<Subscript>4</Subscript> nanoparticles for rechargeable Li/air batteries

Three types of Co₃O₄ nanoparticles are synthesized and characterized as a catalyst for the air electrode of a Li/air battery. The shape and size of the nanoparticles are observed using scanning electron microscopy and transmission electron microscopy analyses. The formation of the Co₃O₄ phase is confirmed by X-ray diffraction. The electrochemical property of the air electrodes containing Co₃O₄ nanoparticles is significantly associated with the shape and size of the nanoparticles. It appears that the capacity of electrodes containing villiform-type Co₃O₄ nanoparticles is superior to that of electrodes containing cube- and flower-type Co₃O₄ nanoparticles. This is probably due to the sufficient pore spaces of the villiform-type Co₃O₄ nanoparticles.     

Reduced graphene oxide supported V<Subscript>2</Subscript>O<Subscript>5</Subscript>-WO<Subscript>3</Subscript>-TiO<Subscript>2</Subscript> catalysts for selective catalytic reduction of NOx

We present a reduced-graphene-oxide (rGO)-supported V2O₅-WO₃-TiO₂ (VWTi) catalysts for the efficient selective catalytic reduction of NOx. The rGO support provides well-dispersed functional sites for the nucleation of nanoparticles, allowing the formation of VWTi catalysts with high specific surface areas. The dispersion of the nanoparticles, as observed by transmission electron microscopy (TEM) and energy dispersive spectroscopy (EDS), confirmed the uniform dispersion of the particles on the rGO surface. Detailed Fourier-transform infrared (FT-IR) and NH₃ temperature-programmed desorption (NH₃-TPD) analyses indicated that the high density of acidic sites provided by the rGO is key to the observed enhancement of NOx removal efficiency, and the rGO-supported catalysts exhibit improved NOx removal efficiencies with smaller amounts of V₂O₅ and WO₃ compared with the commercially available V₂O₅-WO₃-TiO₂ catalysts.     

Effect of surface modification of Fe<Subscript>3</Subscript>O<Subscript>4</Subscript> nanoparticles on the preparation of Fe<Subscript>3</Subscript>O<Subscript>4</Subscript>/polystyrene composite particles via miniemulsion polymerization

Fe₃O₄ nanoparticles were modified by n-octadecyltrimethoxysilane (C18TMS) and 3-trimethoxysilylpropylmethacrylate (MPS). The modified Fe₃O₄ nanoparticles were used to prepare Fe₃O₄/polystyrene composite particles by miniemulsion polymerization. The effect of surface modification of Fe₃O₄ on the preparation of Fe₃O₄/polystyrene composite particles was investigated by transmission electron microscopy, Fourier transform infrared spectrophotometer (FT-IR), contact angle, and vibrating sample magnetometer (VSM). It was found that C18TMS modified Fe₃O₄ nanoparticles with high hydrophobic property lead to the negative effect on the preparation of the Fe₃O₄/polystyrene composite particles. The obtained composite particles exhibited asymmetric phase-separated structure and wide size distribution. Furthermore, un-encapsulated Fe₃O₄ were found in composite particles solution. MPS modified Fe₃O₄ nanoparticles showed poor hydrophobic properties and resulted in the obtained Fe₃O₄/polystyrene composite particles with regular morphology and narrow size distribution because the ended C=C of MPS on the surface of Fe₃O₄ nanoparticles could copolymerize with styrene which weakened the phase separation distinctly.     

A study on synthesis and properties of Fe<Subscript>3</Subscript>O<Subscript>4</Subscript> nanoparticles by solvothermal method

Magnetic nanoparticles (Fe₃O₄) were synthesized by the solvothermal method using FeCl₃ · 6H₂O and ethylene glycol as a reactant. Powder X-ray diffraction, FT-IR, TEM, SEM, and VSM were used to characterize the magnetic particles. The reacting factors, such as reacting time, the concentration of iron source and surfactant, especially the effect of NaAc · 3H₂O, were studied. The results indicated that NaAc · 3H₂O plays the role not only as a dispersant but also a structure-directing agent. The synthesized Fe₃O₄ particles showed excellent magnetic property, which made them have potential for application in magnetic nanodevices and biomedicine.     

Preparation of stable magnetic nanofluids containing Fe<Subscript>3</Subscript>O<Subscript>4</Subscript>@PPy nanoparticles by a novel one-pot route

Stable magnetic nanofluids containing Fe₃O₄@Polypyrrole (PPy) nanoparticles (NPs) were prepared by using a facile and novel method, in which one-pot route was used. FeCl₃·6H₂O was applied as the iron source, and the oxidizing agent to produce PPy. Trisodium citrate (Na₃cit) was used as the reducing reagent to form Fe₃O₄ NPs. The as-prepared nanofluid can keep long-term stability. The Fe₃O₄@PPy NPs can still keep dispersing well after the nanofluid has been standing for 1 month and no sedimentation is found. The polymerization reaction of the pyrrole monomers took place with Fe³⁺ ions as the initiator, in which these Fe³⁺ ions remained in the solution adsorbed on the surface of the Fe₃O₄ NPs. Thus, the core-shell NPs of Fe₃O₄@PPy were obtained. The particle size of the as-prepared Fe₃O₄@PPy can be easily controlled from 7 to 30 nm by the polymerization reaction of the pyrrole monomers. The steric stabilization and weight of the NPs affect the stability of the nanofluids. The as-prepared Fe₃O₄@PPy NPs exhibit superparamagnetic behavior.     

Electrochemical properties of microwave-assisted reflux-synthesized Mn<Subscript>3</Subscript>O<Subscript>4</Subscript> nanoparticles in different electrolytes for supercapacitor applications

The nanosized Mn₃O₄ particles were prepared by microwave-assisted reflux synthesis method. The prepared sample was characterized using various techniques such as X-ray diffraction (XRD), Fourier transform-infrared spectroscopy (FT-IR), Raman analysis, and transmission electron microscopy (TEM). Electrochemical properties of Mn₃O₄ nanoparticles were investigated using cyclic voltammogram (CV), electrochemical impedance spectroscopy (EIS), and galvanostatic charge–discharge analysis in different electrolytes such as 1 M KCl, 1 M Na₂SO₄, 1 M NaNO₃, and 6 M KOH electrolytes. XRD pattern reveals the formation of single-phase Mn₃O₄ nanoparticles. The FT-IR and Raman analysis also assert the formation of Mn₃O₄ nanoparticles. The TEM image shows the spherical shape particles with less than 50 nm sizes. Among all the electrolytes, the Mn₃O₄ nanoparticles possess maximum specific capacitance of 94 F g⁻¹ in 6 M KOH electrolyte calculated from CV. The order of capacitance obtained by various electrolytes is 6 M KOH > 1 M KCl > 1 M NaNO₃ > 1 M Na₂SO₄. The EIS and galvanostatic charge–discharge results further substantiate with the CV results. The cycling stability of Mn₃O₄ electrode reveals that the prepared Mn₃O₄ nanoparticles are a suitable electrode material for supercapacitor application.     

One-pot method fabrication of superparamagnetic sulfonated polystyrene/Fe<Subscript>3</Subscript>O<Subscript>4</Subscript>/graphene oxide micro-nano composites

In this work, using monodispersed sulfonated polystyrene (SPS) microspheres as carriers, FeCl₃·6H₂O and FeSO₄·7H₂O as precursors, NaOH as precipitant in the presence of graphene oxide (GO), SPS/Fe₃O₄/GO micro-nano composites were fabricated by a simple one-pot method employing an inverse coprecipitation in-situ compound technology. The SPS/Fe₃O₄/GO micro-nano composites were characterized by scanning electron microscopy, transmission electron microscopy, X-ray powder diffractometer, Fourier transform infrared spectroscopy, nitrogen adsorption/desorption isotherms and vibrating sample magnetometer. The results show that the SPS/Fe₃O₄/GO micro-nano composites were fabricated with SPS as core, GO and Fe₃O₄ nanoparticles as shell. The SPS/Fe₃O₄/GO micro-nano composites had larger BET specific surface area, average pore width and micropore volume than the pure SPS microspheres. Meanwhile, the SPS/Fe₃O₄/GO micro-nano composites had superparamagnetism and hydrophilic property. The saturation magnetization (M_s) of the SPS/Fe₃O₄/GO micro-nano composites was 10.86 emu/g, which was enough to ensure the convenient magnetic separation of solid and liquid phase.     

Selective oxidation of H<Subscript>2</Subscript>S to ammonium thiosulfate and elemental sulfur using mixtures of V-Bi-O and Sb<Subscript>2</Subscript>O<Subscript>4</Subscript>

The selective oxidation of hydrogen sulfide in the presence of excess water and ammonia was investigated by using vanadium-bismuth based mixed oxide catalysts. Synergistic effect on catalytic activity was observed for the mechanical mixtures of V-Bi-O and Sb₂O₄. Temperature programmed oxidation (TPO), X-ray photoelectron spectroscopy (XPS), and two separated bed reactivity test results supported the role of Sb₂O₄ for reoxidizing the reduced V-Bi-O during the reaction. This paper is dedicated to Professor Hyun-Ku Rhee on the occasion of his retirement from Seoul National University.     

Enhancement of NO absorption in ammonium-based solution using heterogeneous Fenton reaction at low H<Subscript>2</Subscript>O<Subscript>2</Subscript> consumption

A novel NO removal system is designed, where NO is initially oxidized by ?OH radicals from the decomposition of hydrogen peroxide (H₂O₂) over hematite and then absorbed by ammonium-based solution. According to the high performance liquid chromatography (HPLC) profile and the isopropanol injection experiments, the ?OH radicals are proved to play a critical role in NO removal. The NO removal efficiency primarily depends on H₂O₂ concentration, gas hourly space velocity (GHSV), H₂O₂ feeding rate and reaction temperature, while the flue gas temperature slightly affects the NO removal efficiency. The low H₂O₂ consumption makes this system a promising technique in NO removal process using wet-method. The evolution of catalyst in reaction is analyzed by scanning electron microscopy (SEM), energy dispersive X-ray spectrometry (EDS), Fourier Transform infrared spectroscopy (FTIR) and X-ray diffraction (XRD). The nitrite ion and nitrate ion in aqueous solution are detected by the continuous phase flow analyzer. Finally, the macrokinetic parameters of the NO oxidation are obtained by using the initial rate method.     

One-Pot Green Synthesis and Bioapplication of<Emphasis Type="SmallCaps">l</Emphasis>-Arginine-Capped Superparamagnetic Fe<Subscript>3</Subscript>O<Subscript>4</Subscript> Nanoparticles

Water-soluble l-arginine-capped Fe₃O₄ nanoparticles were synthesized using a one-pot and green method. Nontoxic, renewable and inexpensive reagents including FeCl₃, l-arginine, glycerol and water were chosen as raw materials. Fe₃O₄ nanoparticles show different dispersive states in acidic and alkaline solutions for the two distinct forms of surface binding l-arginine. Powder X-ray diffraction and X-ray photoelectron spectroscopy were used to identify the structure of Fe₃O₄ nanocrystals. The products behave like superparamagnetism at room temperature with saturation magnetization of 49.9 emu g⁻¹ and negligible remanence or coercivity. In the presence of 1-ethyl-3-(dimethylaminopropyl) carbodiimide hydrochloride, the anti-chloramphenicol monoclonal antibodies were connected to the l-arginine-capped magnetite nanoparticles. The as-prepared conjugates could be used in immunomagnetic assay.     

Adsorption of Tetracycline with Reduced Graphene Oxide Decorated with MnFe<Subscript>2</Subscript>O<Subscript>4</Subscript> Nanoparticles

Nanomaterials were widely used as efficient adsorbents for environmental remediation of tetracycline pollution. However, the separation of the adsorbents posed the challenge to their practical applications. In this study, we grew magnetic MnFe₂O₄ nanoparticles on the reduced graphene oxide (rGO) to form MnFe₂O₄/rGO nanocomposite with a one-step method. When used as the absorbent of Tetracycline, it exhibited an adsorption capacity of 41?mg/g. The adsorption kinetics and isotherm were fitted well with the pseudo-second order model and Freundlich model, respectively. The MnFe₂O₄/rGO nanocomposite could be easily extracted from the solution with the external magnetic field and regenerated with acid washing.