Effect of copper ions implantation on the corrosion behavior of ZIRLO alloy in 1 mol/L H2SO4

1. IntroductionZIRLO alloy is widely used in the nuclear industrybecause of its low thermal neutron capture cross sec-tion, favorable mechanical properties, and good corro-sion resistance. For example, ZIRLO alloy can serve asfuel cladding, spreaders for …     

Preparation and characterization of nanocomposite MgFe<Subscript>2</Subscript>O<Subscript>4</Subscript>/SiO<Subscript>2</Subscript>

Nanocomposites MgFe₂O₄/SiO₂ were successfully synthesized by the sol-gel method in the presence of N, N-dimethylformamide (DMF). The formation of pure MgFe₂O₄ was confirmed by powder X-ray diffraction (XRD) and electron diffraction. The structural evolution of MgFe₂O₄ nanocrystals was followed by powder X-ray diffraction and IR absorption spectroscopy. The formation of spinel structure of MgFe₂O₄ started at 800 °C, and completed at 900 °C. The transmission electron microscopy (TEM) measurements suggest that the particle sizes increase with the increasing annealing temperature, and the mean particle sizes of the spherical samples annealed at 800 °C, 900 °C and 1 050 °C are ca. 3 nm, 8 nm and 11 nm, respectively. Magnetization measurements at room temperature and 78 K indicate superparamagnetic nature of these MgFe₂O₄ nanocrystals. Funded by the National Natural Science Foundation of China(No. 30771676), the Natural Science Foundation of Jiangsu Province (No. BK20081842), and the Foundation of Nanjing Bureau of Personal for the Returned Overseas Chinese Excellent Scholars     

Synthesis and characterization of a new Fe<Subscript>2</Subscript>O<Subscript>3</Subscript> pillared triple-layered perovskite KSr<Subscript>2</Subscript>Nb<Subscript>3</Subscript>O<Subscript>10</Subscript>

A n-Hexyl NH₃Sr₂Nb₃O₁₀ is obtained by the stepwise ion-exchange reaction, then is dispersed in aqueous solution of trinuclear acetato-hydroxo iron (III) nitrate, [Fe₃(OCOCH₃)₇OH·2H₂O]NO₃, and the interlayer potassium cations of the perovskite niobate are exchanged with the partially hydrolyzed trinuclear acetato complex ions. On heating, the exchanged complex ions are converted into iron oxide pillars which keep the perovskite sheets apart. The product is characterized by XRD, SEM, EDAX and surface area measurement respectively. Zhang Hui: Born in 1970 Funded by the National Natural Science Foundation of China (No. 50002007), Major Program of Ministry of Education (No. 0201) and Open Foundation of State Key Lab of Advanced Tech. for Materials Synthesis and Processing.     

Effect of aluminum addition on microstructure and properties of SiO<Subscript>2</Subscript>-B<Subscript>2</Subscript>O<Subscript>3</Subscript>-Al<Subscript>2</Subscript>O<Subscript>3</Subscript>-CaO vitrified bond

Influence of aluminum addition on the structures and properties of SiO₂-B₂O₃-Al₂O₃-CaO vitrified bond at low sintering temperature and high strength was discussed. FTIR and XRD analyses were used to characterize the structures of the basic vitrified bond with different contents of aluminum. The bending strength and the thermal expansion coefficients were also tested. Meanwhile, the microstructures of composite specimens at sintering temperature of 660 °C were observed by scanning electron microscope (SEM). The experimental results showed that the properties of vitrified bond with 1wt% aluminum were improved significantly, where the bending strength, Rockwell hardness, and thermal expansion coefficient of the vitrified bond reached 132 MPa, 63 HRB, and 6.73×10^-6 °C^-1, respectively.     

Photocatalytic activity of lanthanum and sulfur co-doped TiO<Subscript>2</Subscript> photocatalyst under visible light

A novel lanthanum and sulfur co-doped TiO2 photocatalyst was synthesized by precipitation- dipping method, and characterized by X-ray diffraction（XRD）, transmission electron microscopy（TEM） and UV-Vis diffuse reflectance spectroscopy. Compared with the S-doped TiO, La-doped TiO2 and the standard Degussa P25 photocatalysts, the lanthanum and sulfur co-doped TiO2 photocatalyst （the molar percentage of La is 3.0%） calcined at 450 ℃ for 2 h showed the strongest absorption for visible light and highest activities for degradation of reactive blue 19 dye in aqueous solution under visible light（λ〉400 nm） irradiation. It was also discovered that the co-doping of lanthanum and sulfur hindered the aggregation and growth of TiO2 particles, and the doping of lanthanum reduced slightly the phase transition temperature ofTiO2 from anatase to rutile.     

Preparation of Ti3SiC2 with Aluminum by Means of Spark Plasma Sintering

Polycrystalline bulk Ti3SiC2 material with a high purity and density was fabricated by spark plasma sintering from the elemental powder mixture with starting composition of Ti3Si3Si1-xAlxC2 , where x = 0. 05 -0.2. X-ray diffraction patterns and scanning electron microscopy photographs of the fully dense samples show that a proper addition of aluminum promotes the formation, and accelerates the crystal growth rate of Ti3SIC2, conse-quently results in a high purity of the prepared samples. The synthesized Ti3 SiC2 is in plane-shape with a size of about 10- 25μm in the elongated dimension. Solid solution of aluminum decreases the thermal stability of Ti3SiC2, and lowers the temperature of Ti3SiC2 decomposeing to be 1300 ℃ .     

Nanocomposite films of V<Subscript>2</Subscript>O<Subscript>5</Subscript>−MoO<Subscript>3</Subscript> xerogel with poly ethylene oxide intercalation

Poly ethylene oxide (PEO)_x−V₂O₅−V₂O₅−MoO₃ (x=0, 0.5, 1) films were prepared by the sol-gel method. The synthesis and structure of the films were investigated by XRD, TG-DTA, FTIR, etc. The results show that V₂O₅−MoO₃ xerogel has a layered structure and its interlayer space increased from 1.3181 nm at x=0 to 1. 7898 nm at x=1 after the nanocomposite films were dried, and PEO in the interlayer changes the interface structure by forming hydrogen bonds with V=0 bands. CV measurement indicates that the intercalation of PEO improves insertion/extration properties of Li⁺ ions in the interlayer. ZHENG Jin-xia: Born in 1976 Funded by the National Natural Science Foundation of China (No. 50172036) and Natural Science Foundation of Hubei Province(No. 2001ABB083)     

Synthesis and Characteristic of a New Niobate： BasNaCr0.5Nb9.5O30

A new niobate crystal was synthesized for the first time in BaO-NaO-Cr2O3-Nb2O3 system by the solid state reacition and the flux method. The new compound was studied by X-ray diffraction, electron probe, X-ray microanalysis, chemical analysis and SEM. The result of X-ray powder diffraction shows that Ba5NaCr0.5 Nb9.5O30 belongs to the tetragonal tungsten bronze structure, with space group P4 bin(100) and lattice parameters a=b=12. 4450 (2) A, c=3.9931 (2) A and Z=1. The X-ray powder diffraction lines of the compound were well indexed.     

Effect of pH values on photocatalytic properties of Bi<Subscript>2</Subscript>WO<Subscript>6</Subscript> synthesized by hydrothermal method

Highly crystalline orthorhombic Bi₂WO₆ powders were hydrothermally synthesized from aqueous solutions of Na₂WO₄ · 2H₂O and Bi (NO₃)₃ · 5H₂O over a wide range of pH. The effect of pH on morphologies, sizes and properties of the Bi₂WO₆ crystals was investigated. The band gaps of the as-prepared Bi₂WO₆ were determined from the onset of the absorption edge of UV-vis diffuse reflectance spectra. The methyl orange photodegradation was employed as a probe reaction to test the photocatalytic activity of the as-prepared samples under visible light irradiation. The photocatalytic activities of methyl orange degradation under visible light irradiation are strongly dependent on the pH used in the synthesis. The highest efficiency is observed at pH=7. Funded by the PCSIRT, the National Natural Science Foundation of China (Nos. 50532030 and 50625206) and the Zhejiang Provincial Natural Science Foundation of China (No. Z4080021)     

Conformation of Organic Chain in Phase Transition of Hybrid （Cl2H25NH3）2MnCl4

The structural change in phase transition of hybrid （Cl2H25NH3）2MnCl4 was investigated. The temperature and the structures of the phase transition is investigated by thermal gravimetry （TG） and differential scanning calorimetry （DSC）, infrared spectrum （IR） and X-ray diffraction （XRD）. The results suggest that the phase transition is reversible and the structural change arises from the conformation change of the organic chain. The interlayer distance increases when the hybrid transforms from low temperature phase to high temperature phase. This is explained by the diffusion of gauche-bond along the organic chains and they move away from each other when the phase transition occurs. Combining the experimental data with theoretical calculation, we propose that organic chain of the hybrid in high temperature phase is the conformation of gauche-bond alternating with trans bond （noted as GTG＇TGTG＇TGTG＇T）.     

Effect of salt spray corrosion on tribological properties of HVOF sprayed NiCr-Cr<Subscript>3</Subscript>C<Subscript>2</Subscript> coating with intermediate layer

The objective of the present work was to determine the influence of the neutral salt spray corrosion on the wear resistance of HVOF sprayed NiCr-Cr₃C₂ coating with intermediate layer. Ni-Zn-Al₂O₃ coatings as interlayers were prepared by low pressure cold spray (LPCS) between NiCr-Cr₃C₂ cermet coatings to form a sandwich structure to enhance the corrosion resistance properties. The tribological properties were examined using the UMT-3 fricition and wear tester by line-contact reciprocating sliding under dry and salt spray one week corrosion. The morphology, element distribution, and phase compositions of the coating and worn sufaces were analyzed by using scanning electron microscopy, energy dispersive spectrometry, and X-ray diffraction respectively. The corrosion behavior of the coating was studied by the open-circuit potential, the electrochemical impedance spectroscopy, potentiodynamic polarization, and salt spray corrosion methods. It is found that the sandwich structured coating has better corrosion resistance than the single layer coating. The results show that under dry wear conditions, the wear mechanism is abrasive and adhesive wear, whereas under salt spray corrosion conditions it becomes corrosion wear. The friction coefficient of the sandwich structured coating after salt spray corrosion is slightly lower than the dry friction coefficient, but the weight of the wear loss is lower than that under dry condition.     

Microstructure and Thermal Properties Analysis of （1-x）As2S3-x CdBr2 Glass System

The homogeneous glass sample for the ( 1 - x ) As2S3-xCdBr2, where x=0. 015,0. 035,0.05, was prepared by the conventional melt-quenched method. Amorphoas ( 1 - x ) As2S3-xCdBr2 alloys were determined by X-ray diffraction, thermal compreheasive analysis and Raman scattering. The glass transittion temperature (TR) deereases a bit with the addition of CdBr2 . Based on the experimental data, the microstrtucture is considered to be the discrete molecule species of AsBr3 and Cd - S atomic bonds or clusters are honigeneously dispersed in a disordered polymer network formed by AsS3 pyramids interlinked by sulfur bridges.     

Synthesis and Dielectric Properties of Ba3NaBiNb10O30 Ceramics

A new niobate Ba3 NaBiNb10O30 was synthesized by the solid state reaction. The reaction mixture was characterized by thermogravimetric and differential thermal analysis ( TG-DTA ), X-ray diffraction and dielectric constant measurements. The results show that Ba3NaBiNb10O30 has an orthorhombic tungsten bronze structure with space group Cmm2 and the unit cell parameters are a = 1. 7660( 1 ) mm, a = 1. 7626( 1 ) mm, c = 0.78621(6) mm, Z = 4. Ba3 NaBiNb10O30 undergoes two phase transitions at 200℃ and 400℃, respeaively.     

Effect of deposition time on microstructures and growth behavior of ZrC coatings prepared by low pressure chemical vapor deposition with the Br<Subscript>2</Subscript>-Zr-C<Subscript>3</Subscript>H<Subscript>6</Subscript>-H<Subscript>2</Subscript>-Ar System

ZrC coatings were deposited on graphite substrates by low pressure chemical vapor deposition (LPCVD) with the Br₂-Zr-C₃H₆-H₂-Ar system. The effects of deposition time on the microstructures and growth behavior of ZrC coatings were investigated. ZrC coating grew in an island-layer mode. The formation of coating was dominated by the nucleation of ZrC in the initial 20 minutes, and the rapid nucleation generated a fine-grained structure of ZrC coating. When the deposition time was over 30 min, the growth of coating was dominated by that of crystals, giving a column-arranged structure. Energy dispersive X-ray spectroscopy showed that the molar ratio of carbon to zirconium was near 1:1 in ZrC coating, and X-ray photoelectron spectroscopy showed that ZrC was the main phase in coatings, accompanied by about 2.5mol% ZrO₂ minor phase.     

Ferroelectric properties of Bi<Subscript>4</Subscript>Zr<Subscript>0.5</Subscript>Ti<Subscript>2.5</Subscript>O<Subscript>12</Subscript> thin films prepared on LaNiO<Subscript>3</Subscript> bottom electrode by sol-gel method

The Bi4Zr0.5Ti2.5O12 (BZT) thin films were fabricated on the LaNiO3 bottom electrode using sol-gel method. The structure and morphology of the films were characterized using X-ray diffraction, AFM and SEM. The results show that the films have a perovskite phase and dense microstructure. The 2Pr and 2Vc of the Pt/BZT/LaNiO3 capacitor are 28.2 μC/cm2 and 14.7 V respectively at an applied voltage of 25 V. After the switching of 1×1010 cycles, the Pr value decreases to 87% of its pre-fatigue values. The dielectric constant (ε) and the dissipation factor (tanδ) of the BZT thin films are about 204 and 0.029 at 1 kHz, respectively. The films show good insulating behavior according to the test of leakage current. The clockwise C-V hysteresis curve observed shows that the Pt/BZT/LaNiO3 structure has a memory effect because of the BZT film's ferroelectric polarization.     

Thermoelectric Properties and Electronic Structure of Ca3Co2O6

The nanosized Ca3Co2O6 powder was synthesized via sol-gel process.The phase composition was characterized by means of X-ray diffraction.Polycfrystalline swnples of Ca3Co2O6 were prepared by a sintering procedure of nanosized power.The seebeck cofficient and electrical conductivity of the samples were measured from 450K up to 750 K.The results show that the Seebeck coefficient increases with the increasing temperature.The electronic structures were calculated using the self-cwtsistent full-potential linearized augmentedc plane-wave (LAPW) method within the density functional theory.The relationship between thermoelectric property and electronic structures was discussed.     

Effect of ZnO-B<Subscript>2</Subscript>O<Subscript>3</Subscript> glass addition on the microwave dielectric properties of BaO-Nd<Subscript>2</Subscript>O<Subscript>3</Subscript>-TiO<Subscript>2</Subscript>-Bi<Subscript>2</Subscript>O<Subscript>3</Subscript> system

The effect of ZnO-B₂O₃(ZB) glass addition on the sintering behavior, microstructures and microwave dielectric properties of BaO-Nd₂O₃-TiO₂-Bi₂O₃ (BNTB) system was investigated with the aid of X-ray diffraction, scanning electron microscopy and capacitance meter. It is found that the ZB glass addition, acting as a sintering aid, can effectively lower the sintering temperature of BNTB system to 850 °C. The dielectric constant of BNTB-ZB ceramics increases with the increase of soaking time and the value of dielectric loss decreased with increasing soak time. The optical dielectric properties at 1 GHz of ɛ=74, tan δ=4×10⁻⁴, and TCC=25 ppm/°c were obtained for the BNTB system doped with 25 wt% ZB glass sintered at 850 °C for 2 h, representing that the BNTB-ZB ceramics could be promising for multilayer low temperature co-fired ceramics applications.     

Double-layer modification of water-based aluminum with SiO<Subscript>2</Subscript> and polyacrylic acid by sol-gel process and in situ polymerization

A double-layer aluminum consisting of an aluminum core and a shell of SiO₂ and polyacrylic acid was synthesized. This modified aluminum was used to improve the corrosion resistance and dispersive property of aluminum in waterborne media. TEM, FTIR, XPS, and EDX determination showed that PAA and SiO₂ were coated on the surface of aluminum. Evolved hydrogen detection showed that the corrosion resistance of composite particle had been markedly improved. Maximum corrosion inhibition efficiency of SiO₂ coated aluminum (SiO₂@Al) was 95.1% while that of double-layer coated aluminum (PAA/SiO₂@Al) was 98.8%. Meanwhile, polyacrylic acid layer improved the agglomeration of aluminum significantly. According to the dispersibility test, the particle size of 50% volume fraction [d(0.5)] of aluminum, SiO₂@Al and PAA/SiO₂@Al were 42, 53, and 34 μm, respectively.     

Microstructures and mechanism of Al<Subscript>2</Subscript>O<Subscript>3</Subscript>/Al composites fabricated by the reaction between SiO<Subscript>2</Subscript> and molten aluminum

Al₂ O₃/Al composite was fabricated by the reaction between SiO₂ and molten aluminum. The microstructures of the composite obtained under different reaction conditions were analyzed. The formation mechanism of the composite microstructure was discussed. Results show that the reaction kinetics is influenced remarkably by the reaction temperature, reaction time and the quantity of SiO₂. The morphologies of Al₂O₃ have different features, depending on the reaction temperature. The composite has equaxed Al₂O₃ grains when materials reacted below 1200°C, and the composite is composed of a large number of fine Al₂O₃ grains and aluninum. The composite has a frame-shaped Al₂O₃ microstructure at the reaction temperature of above 1250°C. CHENG Xiao-min: Born in 1964 Funded by the National Natural Science Foundation of China (No. 91522)     

Composite cathode Bi<Subscript>1.14</Subscript>Sr<Subscript>0.43</Subscript>O<Subscript>2.14</Subscript>-Ag for intermediate-temperature solid oxide fuel cells

Composites consisting of strontium stabilized bismuth oxide （Bi1.14Sr0.43O2.14, SSB） and silver were investigated as cathodes for intermediate-temperature solid oxide fuel cells with doped ceria electrolyte. There were no chemical reactions between the two components. The microstructure of the interfaces between composite cathodes and Ce0.8Sm0.2O1.9 （SDC） electrolytes was examined by scanning electron microscopy （SEM）. Impedance spectroscopy measurements show that the performance of cathode fired at 700 ℃ is the best. When the content of Ag2O is 70 wt%, polarization resistance values for the SSB-Ag cathodes are as low as 0.2 Ωcm^2 at 700℃ and 0.29 Ωcm^2 at 650℃. These results are much smaller than some of other reported composite cathodes on doped ceria electrolyte and indicate that SSB-Ag composite is a potential cathode material for intermediate temperature SOFCs.