An efficient solvent-free catalyst system for hydrosilylation of aldehydes and ketones was developed based on iron pre-catalyst Fe2(CO)9/C6H4-o-(NCH2PPh2)2BH. The reactions were tolerant of many functional groups and the corresponding alcohols were isolated in good to excellent yields following basic hydrolysis of the reaction products. The reaction is likely catalyzed by an in situ generated pincer ligated iron hydride complex.
Graphic Abstract 相似文献A monolithic complexed catalyst composed of a piece of Co foam decorated with Ru nanosheets has been fabricated. This catalyst has demonstrated excellent performance in catalyzing NaBH4 hydrolysis under alkaline conditions. Most importantly, the bulky size of the developed catalyst provides convenience to control the start and stop of hydrogen production by manipulating the attachment and detachment between the catalyst and NaBH4 solution. These features endow this catalyst with great potential for on-site hydrogen supply.
Graphic Abstract 相似文献This work proposed a new path to synthesize Ni-phyllosilicate through the reaction of nickel hydroxide and silica sol on the surface of Ni-foam to form the monolithic Ni-phyllosilicate/Ni-foam catalyst. Ni-phyllosilicate could reprint the morphology of nickel hydroxid and firmly anchor on the framework of Ni-foam, which obtained fine Ni particles of 2.8 nm after reduction in H2 at 650 °C, resulting in high catalytic activity for CO2 methanation. In addition, the Ni-phyllosilicate/Ni-foam catalyst showed high long-term stability in a 100 h-lifetime test owing to the combined effects of surface confinement of Ni-phyllosilicate, firm anchoring between Ni-phyllosilicate and Ni-foam, as well as the high heat transfer property of Ni-foam.
Graphical Abstract 相似文献Micro-mesoporous aluminosilicates based on ZSM-5 zeolite, obtained by a dual template method, as well as in the presence of a dual-functional template (i.e. a Gemini-type surfactant), were tested in the oxidation of furfural with hydrogen peroxide. Even substantial changes in acidity and porosity of the catalysts result in minor variations of selectivity towards the desired products. Application of the synthesized zeolite-based materials in the oxidation of furfural with hydrogen peroxide leads to formation of 2(5H)-furanone (yield up to 28.5%) and succinic acid (up to 19.5%) as the main C4 reaction products. The kinetic model developed previously to treat the results for oxidation of furfural over sulfated zirconia was able to describe the data also for micro-mesoporous aluminosilicates.
Graphical Abstract 相似文献The statistical selectivity models were developed for four different Fischer–Tropsch synthesis product range, including methane (CH4), light olefins (C2=C4), light paraffins (C2–C4), and long-chain hydrocarbons (C5+), based on the experimental data obtained over thirteen γ-Al2O3 supported cobalt-based catalysts with different cobalt particle and pore sizes. The input variables consist of cobalt metal particle size and catalyst pore size. The cubic and quadratic polynomial equations were fitted to the experimental data, however, the mathematical models were subjected to model reduction for the enhancement of model adequacy, which was investigated through ANOVA. The multi-objective optimization revealed that the maximum C5+?selectivity (84.150%) could be achieved at the cobalt particle size and pore sizes of 14.764 and 23.129 nm, respectively, while keeping the selectivity to other hydrocarbon products minimum.
Graphic Abstract 相似文献The magic number clusters Au102(p-MBA)44 and Au144(p-MBA)60 were synthesized and tested for their ability to catalyze the reduction of 4-nitrophenol. Kinetic and thermodynamic analyses demonstrate that both clusters are effective catalysts with activation energies less than 10 kJ/mol and turnover frequencies approaching 103 h–1 per surface gold atom.
Graphic Abstract 相似文献In this study, g-C3N4-TiO2 nanocomposite structure has been loaded with Co3O4 via electroless plating and thermal annealing to form Co3O4@g-C3N4-TiO2 catalyst material for H2 generation from NaBH4 hydrolysis. The material characterizations of the fabricated catalyst have been performed before and after exposure to an aqueous NaBH4 solution to understand the changes in catalytic performance and material properties. The Arrhenius activation energies have been determined to be 58 kJ mol?1. The hydrogen generation rates have been observed as 180 and 1200 mL min?1 gcat?1 for the catalyst hydrolysis of NaBH4 at 30 °C and 60 °C, respectively. The catalytic activity performed in NaBH4 solution exhibited good reusability.
Graphical Abstract 相似文献Achieving the removal of the toxic nitric oxide (NO) gas efficiently and cheaply has always been a challenge. Herein, we systematically investigate the reduction mechanisms of NO on the surface of the Fe–PCs (PCs?=?phthalocyanines) using density functional theory calculations. The isolated iron atom not only plays the role of an adsorption and activation site for the NO molecule but also works as an electron transfer medium in the whole reaction process. The results indicate that the catalytic reduction of NO to N2 takes place through a continuous two-step pathway. The first step involves the reduction of NO to N2O through a competitive Langmuir–Hinshelwood and Eley–Rideal mechanisms with the energy barrier of 1.19 eV and 0.60 eV, respectively. The second step involves the reduction of N2O to N2 with an energy barrier of 0.91 eV. These reaction pathways are favorable thermodynamically, thus the Fe–PCs catalyst is a promising candidate for the abatement of NO gases.
Graphic Abstract 相似文献CuO–CeO2 (Cu–Ce) catalyst with a CuO/CeO2 mass ratio of 1 prepared by a sol–gel method is used in the CO catalytic oxidation reaction in the actual industrial sulfur-containing atmosphere. At a reaction temperature of 200 °C, the catalyst exhibits quite different stability under sulfur-containing and sulfur-free conditions. When 30 ppm SO2 was added to the feed gas, the Cu–Ce catalyst had an initial CO conversion rate of 100%, gradually decreasing after 26 h, and this catalyst completely deactivated at about 50 h. However, the CO conversion rate of the catalyst under sulfur-free conditions could be nearly maintained at 100% within the measured time range (60 h). The results of IR, Raman, and XPS characterizations proved that the accumulation of cerium sulfate on the Cu–Ce catalyst would cover the active sites of the catalyst, eventually leading to the complete deactivation of the catalyst, which provides favorable evidence for the actual industrial anti-sulfur application.
Graphical Abstract 相似文献The present work aims to investigate the effect adding Ag, Co, Ni, Cd and Pt to copper on ethanol dehydrogenation. The catalysts synthesized by deposition–precipitation method were characterized using various physicochemical methods such as N2 adsorption–desorption, TPR, SEM–EDX, XRD, XPS and TGA–DSC-MS. Catalytic evaluation results revealed that the predominant product of the reaction was acetaldehyde. Monometallic copper or mixed with Cd, Ag or Co show good catalytic performances. Adding nickel to copper improves the process conversion but reduces acetaldehyde selectivity, giving rise to methane in produced hydrogen. Pt-Cu/SiO2 catalyst guides the reaction towards diethyl ether. Time on stream tests performed during 12 h at 260 °C, showed that adding Cd to Cu enhances its stability by over 30% of conversion, this is explained by the reduction of copper crystallites sintering, which makes Cd-Cu/SiO2 a promising catalyst for the production of acetaldehyde by ethanol dehydrogenation.
Graphic Abstract 相似文献Although numerous efforts have been made in direct syngas conversion to higher alcohols via Fischer–Tropsch synthesis, the higher alcohols distribution remains a challenge. Here, we introduce alkaline earth metal oxide as promoter into activated carbon supported cobalt catalyst to tune distribution of higher alcohols. With the addition of Mg, the distribution of C2-5 alcohols increase from 41.2 to 75.8% accompanying with distribution of C6-18 alcohols decrease from 52.8 to 14.0%. Ba-promoted Co based catalyst (CoBa/AC) presents similar alcohols distribution to un-promoted catalyst, while the alcohol selectivity over CoBa/AC is higher than Co/AC. For promoted catalysts, the distribution of C6-18 alcohols increased in the order of Mg?<?Ca?<?Sr?<?Ba. The characterization results exhibit that the promoter addition facilitates the cobalt carbide formation, which leads to enhancement of selectivity to higher alcohols. The available active cobalt sites of promoted Co based catalysts increase in the same above order of Mg?<?Ca?<?Sr?<?Ba.
Graphic Abstract 相似文献Heterogeneous catalysts based on metallic nanoparticles are promising candidates for wastewater treatment. However, they aggregate easily as a result of their high surface energy. Polymers are very popular supporting catalyst materials because they can stabilize the metallic nanoparticles to prevent aggregation. In this study, aniline-pentamer-based electroactive polyurea (EPU) was synthesized by oxidative coupling, and Au nanoparticles were anchored to the EPU via its aniline segments. Electrochemical redox behavior of the as-synthesized EPU was monitored by electrochemical cyclic voltammetry. The Au/EPU composite was characterized by FTIR, UV–vis, TGA, SEM, TEM, XRD XPS, and ICP-OES. SEM showed that the EPU had a flower-like structure, and the Au nanoparticles were uniformly immobilized on the EPU surface. The reduction of 4-nitrophenol (4-NP) by NaBH4 was used as a model reaction to evaluate the catalytic properties of the Au/EPU composite. Moreover, the optimization of the reaction conditions for the reduction of 4-NP to 4-aminophenol (4-AP) were also studied in detail. The Au/EPU composite catalyzed the reduction of 4-NP to 4-AP within 4 min with a rate constant of 2.4?×?10–2 s?1 and an activation energy of 40.17 kJ/mol. The Au/EPU composite demonstrated high conversion (98%) after 20 successive cycles.
Graphical abstract 相似文献APO-11 aluminophosphate molecular sieve was prepared by hydrothermal method of aluminum hydroxide with diisopropylamine. Ni–P/APO-11 amorphous alloy catalysts were prepared by chemical reduction method and used for the hydrogenation of α-pinene reaction. The catalysts were characterized by X-Ray photoelectron spectroscopy (XPS), Nitrogen adsorption–desorption isotherms (BET), scanning electron microscope (SEM), transmission electron microscope (TEM) and fourier transform infrared spectrometer (FT-IR).The prepared conditions of the Ni–P/APO-11 catalysts played important roles on the hydrogenation of α-pinene reaction. It was found that the preparation temperature, P/Ni molar ratio and pH value had great influence on the reduction dosage, dispersion and particle sizes of the catalysts, thus affecting the reactivity of the catalysts. The appropriate reaction conditions explored were at 30 °C, n(P/Ni)?=?5 and pH?=?8, obtaining a 90.65% conversion of α-pinene and 97.87% selectivity to cis-pinane. Under these conditions, the catalysts exhibited better repeatability and stability.
Graphic Abstract 相似文献In this study, the porous ultrathin graphitic carbon nitride (CN) nanosheets with rich C and nitrogen defects were prepared by one-step calcining the mixture of melamine and glucose (Glu) in air atmosphere (Glu-CN). Introducing simultaneously rich C atoms and nitrogen defects into CN structures continuously modulates the bandgaps from 2.67 to 1.81 eV of CN photocatalysts. Due to large surface area, more active sites, remarkably longer lifetime of charge carriers and adjustable band gap structure, the prepared ultrathin porous CN nanosheets show the enhanced photocatalytic performance for the degradation of methyl orange (MO) under visible light. The degradation efficiency of optimal CN nanosheet photocatalyst for MO is 5.75 times that of bulk CN. This work provides a facile and universal relevance approach to engineer the band structures of CN by introduction of rich C and porous morphology for high-performance photocatalytic, which can provide informative principles for the design of efficient photocatalysis systems for solar energy conversion.
Graphic Abstract 相似文献This work addresses the reduction of NOx by H2 under O2-rich conditions using Al2O3/SiO2-supported Pt catalysts with different loads of WOx promotor. The samples were thoroughly characterised by N2 physisorption, temperature-programmed desorption of CO, scanning electron microscopy, X-ray diffraction, laser raman spectroscopy, X-ray photoelectron spectroscopy and diffuse reflectance infrared fourier transform spectroscopy with probe molecule CO. The catalytic studies of the samples without WOx showed pronounced NOx conversion below 200 °C, whereas highest efficiency was related to small Pt particles. The introduction of WOx provided increasing deNOx activity as well as N2 selectivity. This promoting effect was referred to an additional reaction path at the Pt-WOx/Al2O3/SiO2 interface, whereas an electronic activation of Pt by strong metal support interaction was excluded.
Graphic Abstract 相似文献In the development of photocatalytic processes towards waste water treatment, we have been long faced three foremost obstacles, including catalyst mass production, photon-energy cost and finally catalyst separation process after the treatment. In this study, such problems were addressed through the development of samarium and cerium-doped BiFeO3 (BFO) nanoparticles (NPs) (BixRExFeO3; RE?=?Sm, Ce, x?=?0.00, 0.01, 0.03, 0.05;) employing a rapid solution combustion synthesis (SCS). This technique is greatly capable of large scale nanopowder production at low temperature. In the SCS procedure, different amount of oxidant-to-fuel (glycine-to-nitrate ion, Gly/NO3?) were investigated (Gly/NO3??=?0.2, 0.3, 0.37, 0.56, and 0.8). Moreover, a catalytic sunlight irradiation was employed to study the effect of Sm and Ce dopant contents on the photodegradation of benzene and methyl orange (MO) in the aqueous solution. The as-synthesized catalysts were characterized by X-ray diffraction (XRD), field emission scanning electron microscopy (FE-SEM), UV–Visible diffuse reflectance spectroscopy (UV–Vis DRS) and Brunauer–Emmett–Teller (BET)/Barrett-Joyner Halenda (BJH) techniques. The band gap energy of BFO decreaed from 2.14 to 2.06 eV with the increase of Sm3+ contents while it increased up to 2.22 eV in the case of Ce-doped BFO. The solar decomposition of the organic pollutants demonstrated the superior performance of Bi1-xSmxFeO3 photocatalyst rather than using cerium in the BFO crystalline structure which is attributed to the increased surface area and visible light harvesting.
Graphic Abstract 相似文献LaBO3 (B?=?Fe, Mn, and FeMn) perovskite-type oxides were prepared by sol–gel method and then used as catalysts in CO hydrogenation for light olefins. The catalysts were characterized using XRD, H2-TPR, SEM, CO (CO2)-TPD, and XPS. The results showed that the lattice oxygen migration and oxygen vacancies promoted oxygen mobility by doping Mn2+ at the B site, Moreover, the presence of manganese as a promoter in the catalyst increased olefin selectivity compared with the olefin selectivity of the catalyst containing iron at the B-site and exhibited resistance to carbon deposition; while reducing the metal elements. In CO hydrogenation, potassium-promoted LaFeMnO3 catalysts afforded high catalytic activity and C2=–C4= selectivity. An O/P value of 5.0 and a C2=–C4= fraction of 54% were achieved for all hydrocarbons with low methane selectivity.
Graphic Abstract 相似文献The reaction network of oxidative carbonylation of methanol (CH3OH) over CuY catalyst prepared by solid-state ion exchange of HY zeolite with CuCl was enriched by combination of in-situ diffuse reflectance infrared fourier transform spectroscopy and mass spectrometric. Based on the proposed mechanism of dimethyl carbonate formation on CuY in literature, this study mainly focused on the origin of the O atom in methoxyl and the reaction pathway for by-products formation. The interaction of the catalyst with different reactants and reactant mixtures (CH3OH, CH318OH, HCHO, O2, CH3OH/HCHO and CH318OH/CO/O2) was studied in detail. It was found that in the presence of CuOx or oxygen, methoxide species are generated by breaking of the O–H bond. Reaction of methoxide species with oxygen leads to the formation of formaldehyde (HCHO), followed by the generation of formate species through consecutive oxidation of HCHO.
Graphic Abstract 相似文献g-C3N4 has received much attention due to its role in photocatalytic hydrogen evolution and contaminants degradation. Nevertheless, the photocatalytic property of bulk g-C3N4 (BCN) is seriously restricted owing to its short photo-generated carrier lifetime, small specific surface area and low visible light utilization rate, etc. In this study, nanosheet constructing and heteroatom phosphorus (P) doping, as two important strategies, are synergistically adopted to co-enhance its activity. The controllable P atoms were successfully doped into the framework of g-C3N4 nanosheet (NCN-P) through forming P-N bond. The optimized NCN-P sample displays an excellent H2 production rate (3263.99 µmol·g?1·h?1) under white LED light irradiation, which is more than 11.6 times that of the BCN. Moreover, it also exhibits excellent photocatalytic degradation ratio of tetracycline reached 80% in 1 h. Furthermore, the optimized NCN-P sample still maintains robust photocatalytic performance after recycling tests, making it as a bright prospect photocatalyst for solar energy utilization and contaminants removal.
Graphic Abstract 相似文献In this research, four cholines supported on core–shell iron oxides, Fe2O3@MgO@Ch.OAc (choline acetate), Fe2O3@MgO@Ch.OH (choline hydroxide), Fe3O4@Ch.OAc, Fe3O4@Ch.OH, were synthesized. The synthesized catalysts were tested in 1,2,3-triazoles synthesis by the reaction of nitromethane, aldehyde, and benzyl azide in EtOH as a green solvent. Among four synthesized heterogeneous catalysts, the Fe2O3@MgO@ch.OAc showed superior catalytic activity for the reaction and afforded the desired triazoles in good isolated yields under mild reaction conditions.
Graphic Abstract 相似文献