Low‐Noise and Large‐Linear‐Dynamic‐Range Photodetectors Based on Hybrid‐Perovskite Thin‐Single‐Crystals

Organic–inorganic halide perovskites are promising photodetector materials due to their strong absorption, large carrier mobility, and easily tunable bandgap. Up to now, perovskite photodetectors are mainly based on polycrystalline thin films, which have some undesired properties such as large defective grain boundaries hindering the further improvement of the detector performance. Here, perovskite thin‐single‐crystal (TSC) photodetectors are fabricated with a vertical p–i–n structure. Due to the absence of grain‐boundaries, the trap densities of TSCs are 10–100 folds lower than that of polycrystalline thin films. The photodetectors based on CH₃NH₃PbBr₃ and CH₃NH₃PbI₃ TSCs show low noise of 1–2 fA Hz^?1/2, yielding a high specific detectivity of 1.5 × 10¹³ cm Hz^1/2 W^?1. The absence of grain boundaries reduces charge recombination and enables a linear response under strong light, superior to polycrystalline photodetectors. The CH₃NH₃PbBr₃ photodetectors show a linear response to green light from 0.35 pW cm^?2 to 2.1 W cm^?2, corresponding to a linear dynamic range of 256 dB.     

Bimetal‐Organic‐Framework Derivation of Ball‐Cactus‐Like Ni‐Sn‐P@C‐CNT as Long‐Cycle Anode for Lithium Ion Battery

Metal phosphides are a new class of potential high‐capacity anodes for lithium ion batteries, but their short cycle life is the critical problem to hinder its practical application. A unique ball‐cactus‐like microsphere of carbon coated NiP₂/Ni₃Sn₄ with deep‐rooted carbon nanotubes (Ni‐Sn‐P@C‐CNT) is demonstrated in this work to solve this problem. Bimetal‐organic‐frameworks (BMOFs, Ni‐Sn‐BTC, BTC refers to 1,3,5‐benzenetricarboxylic acid) are formed by a two‐step uniform microwave‐assisted irradiation approach and used as the precursor to grow Ni‐Sn@C‐CNT, Ni‐Sn‐P@C‐CNT, yolk–shell Ni‐Sn@C, and Ni‐Sn‐P@C. The uniform carbon overlayer is formed by the decomposition of organic ligands from MOFs and small CNTs are deeply rooted in Ni‐Sn‐P@C microsphere due to the in situ catalysis effect of Ni‐Sn. Among these potential anode materials, the Ni‐Sn‐P@C‐CNT is found to be a promising anode with best electrochemical properties. It exhibits a large reversible capacity of 704 mA h g^?1 after 200 cycles at 100 mA g^?1 and excellent high‐rate cycling performance (a stable capacity of 504 mA h g^?1 retained after 800 cycles at 1 A g^?1). These good electrochemical properties are mainly ascribed to the unique 3D mesoporous structure design along with dual active components showing synergistic electrochemical activity within different voltage windows.     

Bruchmechanische Untersuchung der Titan‐PEEK‐Grenzfläche in thermoplastischen Titan‐CF/PEEK‐Laminaten durch Mixed‐Mode‐Bending‐Versuche

The adhesion and failure mechanism at well‐designed titanium‐PEEK interfaces within Ti‐CF/PEEK laminates are investigated by superposed mode I‐ and mode II‐loading before and after hydrothermal aging. The laser‐induced columnar structured oxide layer enhances the adhesion at the Titanium‐PEEK interface. PEEK‐Polymer that is locked mechanically in the capillary gaps of the columnar oxide structure are stretched and stiffed in the case of loading resulting in good adhesion. The adhesion at the oxide structure reduces by the influence of hydrothermal aging. Basically, the failure mechanism is not changed. Thus, the columnar oxide structure leads to enhanced humidity resistance of the adhesion between titanium and PEEK. The PEEK‐Polymer is also locked in the undercuts between the depressions and rims of the laser‐induced dot‐like surface structure resulting in adhesion. The adhesion at the dot‐like structured surface is nearly completely reduced by the influence of hydrothermal aging. The failure mechanism is changed from ductile failure within the PEEK‐Polymer to party disrupted rims and melt spatter.     

Stretchable Organometal‐Halide‐Perovskite Quantum‐Dot Light‐Emitting Diodes

Stretchable light‐emitting diodes (LEDs) and electroluminescent capacitors have been reported to potentially bring new opportunities to wearable electronics; however, these devices lack in efficiency and/or stretchability. Here, a stretchable organometal‐halide‐perovskite quantum‐dot LED with both high efficiency and mechanical compliancy is demonstrated. The hybrid device employs an ultrathin (<3 µm) LED structure conformed on a surface‐wrinkled elastomer substrate. Its luminescent efficiency is up to 9.2 cd A^?1, which is 70% higher than a control diode fabricated on the rigid indium tin oxide/glass substrate. Mechanical deformations up to 50% tensile strain do not induce significant loss of the electroluminescent property. The device can survive 1000 stretch–release cycles of 20% tensile strain with small fluctuations in electroluminescent performance.     

High‐Performance n‐Channel Organic Transistors Using High‐Molecular‐Weight Electron‐Deficient Copolymers and Amine‐Tailed Self‐Assembled Monolayers

While high‐performance p‐type semiconducting polymers are widely reported, their n‐type counterparts are still rare in terms of quantity and quality. Here, an improved Stille polymerization protocol using chlorobenzene as the solvent and palladium(0)/copper(I) as the catalyst is developed to synthesize high‐quality n‐type polymers with number‐average molecular weight up to 10⁵ g mol^?1. Furthermore, by sp²‐nitrogen atoms (sp²‐N) substitution, three new n‐type polymers, namely, pBTTz, pPPT, and pSNT, are synthesized, and the effect of different sp²‐N substitution positions on the device performances is studied for the first time. It is found that the incorporation of sp²‐N into the acceptor units rather than the donor units results in superior crystalline microstructures and higher electron mobilities. Furthermore, an amine‐tailed self‐assembled monolayer (SAM) is smoothly formed on a Si/SiO₂ substrate by a simple spin‐coating technique, which can facilitate the accumulation of electrons and lead to more perfect unipolar n‐type transistor performances. Therefore, a remarkably high unipolar electron mobility up to 5.35 cm² V^?1 s^?1 with a low threshold voltage (≈1 V) and high on/off current ratio of ≈10⁷ is demonstrated for the pSNT‐based devices, which are among the highest values for unipolar n‐type semiconducting polymers.     

Compound‐Droplet‐Pairs‐Filled Hydrogel Microfiber for Electric‐Field‐Induced Selective Release

The separate co‐encapsulation and selective controlled release of multiple encapsulants in a predetermined sequence has potentially important applications for drug delivery and tissue engineering. However, the selective controlled release of distinct contents upon one triggering event for most existing microcarriers still remains challenging. Here, novel microfluidic fabrication of compound‐droplet‐pairs‐filled hydrogel microfibers (C‐Fibers) is presented for two‐step selective controlled release under AC electric field. The parallel arranged compound droplets enable the separate co‐encapsulation of distinct contents in a single microfiber, and the release sequence is guaranteed by the discrepancy of the shell thickness or core conductivity of the encapsulated droplets. This is demonstrated by using a high‐frequency electric field to trigger the first burst release of droplets with higher conductivity or thinner shell, followed by the second release of the other droplets under low‐frequency electric field. The reported C‐Fibers provide novel multidelivery system for a wide range of applications that require controlled release of multiple ingredients in a prescribed sequence.     

High‐Tech‐Cellulose‐Funktionspolymere nach dem ALCERU®‐Verfahren

Functional High‐Tech‐Cellulose materials by the ALCERU® process Cellulose is one of the eldest materials of mankind. While the use of cellulose in former times was focused on application as a more construction or as a more textile material at present time the application profile turns to a more functional material using the ALCERU® process. Shaping of pure cellulose dissolution in NMMNO permits the manufacturing of materials for upholstery, filtration or biodegradable film strips having an uniform cross section. Fibreds, which can be applied in several packaging materials, are available using different techniques for regeneration cellulose. A great field of innovative functional cellulose materials is opened up by addition of several functional additives to cellulose dissolution. In this way piezo‐electrical conductive cellulose fibres (PZT) or high‐temperature filtration membranes are to be generated if one adds special types of ceramic powders. Above all PZT green fibres are applied in more recent uses as sensors or actuators. Electrically conductive cellulose fibres or filaments, which can be also used in the textile chain, can be prepared adding conductive carbon black to a cellulose dope on the same way, too. Cellulose material having adapted conductivity to different application is available by adding an exact defined amount of carbon black to cellulose dissolution. Finally cellulose beads can be manufactured by means of varied shaping technique. The beads are showing variable particle sizes and narrow pore size distribution. These properties open up very interesting application in the field of human blood purification or chromatography.     

Black‐Phosphorus‐Based Orientation‐Induced Diodes

Despite many decades of research of diodes, which are fundamental components of electronic and photoelectronic devices with p–n or Schottky junctions using bulk or 2D materials, stereotyped architectures and complex technological processing (doping and multiple material operations) have limited future development. Here, a novel rectification device, an orientation‐induced diode, assembled using only few‐layered black phosphorus (BP) is investigated. The key to its realization is to utilize the remarkable anisotropy of BP in low dimensions and change the charge‐transport conditions abruptly along the different crystal orientations. Rectification ratios of 6.8, 22, and 115 can be achieved in cruciform BP, cross‐stacked BP junctions, and BP junctions stacked with vertical orientations, respectively. The underlying physical processes and mechanisms can be explained using “orientation barrier” band theory. The theoretical results are experimentally confirmed using localized scanning photocurrent imaging. These orientation‐induced optoelectronic devices open possibilities for 2D anisotropic materials with a new degree of freedom to improve modulation in diodes.