单片机输入,输出接口电路的设计及编程

介绍单片机应用系统输入、输出接口电路的设计及编程。该电路采用８２５５作为接口芯片，外接薄膜键盘、液晶显示器，构成一种通用的单片机输入、输出子系统。     

单片机多功能通道电路的研制

本文基于单片机最小系统设计了通用、廉价的实用接口电路，详细说明了A／D、D／A、中断扩展等电路的设计原理和接口电路功能。给出了全部接口电路原理图和芯片布局图。     

51单片机应用系统接口电路的设计

介绍一种用于５１系列单片机应用系统的接口电路，亦可用于其它单片机应用系统。该电路采用８２５５作为接口芯片，可外接简易键盘、ＬＥＤ显示器以及微型打印机，构成较简单的单片机应用系统。经实验表明：该接口电路简单、可靠、使用方便，对智能仪器、仪表或过程参数检测与控制装置的设计具有一定的参考价值。     

SPI接口芯片在单片机小系统中的应用

介绍以89C2051单片机为主机与2种SPI接口芯片构成的小系统，阐述了硬件电路，并给出了SPI接口的C51程序。     

单片机系统通用接口电路的设计

介绍一种用于单片机应用系统的通用接口电路,该电路采用8255作为接口芯片,可外接键盘、显示器和打印机,以构成最简单的单片机应用系统.重点介绍了硬件电路的组成和程序设计.     

智能化硅酸根分析仪

介绍了电压频率转换器ＡＤ６５０和日历时钟芯片Ｍ５８３２与单片机８０３１的连接。文章给出了芯片与接口电路的硬件电路和软件实用程序。     

程控SPWM电路的设计方法

介绍了一种基于单片机控制的三相SPWM发生器，采用了SA4828芯片，具有电路结构简单，全数字控制，不占用微机资源等优点，给出了接口的硬件电路和程控参数。     

全串行单片机系统在光纤气敏传感器中的应用

针对传统电路硬件复杂及可靠性差等问题，介绍了利用AT89C51单片机和相应的SPI串行接口芯片，构成的一种光纤气敏传感器的数据采集和数据处理部分，在分析了各串行芯片的特点后，详细介绍了该单片机系统的硬件接口电路和软件程序，由于该光纤气敏传感器具有电路简单，体积小，运行可靠等特点，因而具有很好的应用前景。     

双全桥微步距PWM马达驱动器A3972芯片及应用

主要介绍双全桥微步距PWM马达驱动器A3972芯片及其应用，阐述了该芯片的内部结构、工作特点，并给出了由A3972组成的步进电机驱动电路及与单片机的接口，以及该芯片的控制方法     

AD1376在陀螺仪漂移测试装置中的应用

简要介绍了ＡＤ１３７６芯片的功能特点，给出了ＡＤ１３７６在陀螺仪漂移测试装置中单片机接口电路的应用实例。     

Only connect: teaching, technology and telesis

Abstract This paper describes an approach to the design of interactive multimedia materials being developed in a European Community project. The developmental process is seen as a dialogue between technologists and teachers. This dialogue is often problematic because of the differences in training, experience and culture between them. Conditions needed for fruitful dialogue are described and the generic model for learning design used in the project is explained.     

European Community policy and the market

Abstract This paper starts with some reflections on the policy considerations and priorities which are shaping European Commission (EC) research programmes. Then it attempts to position the current projects which seek to capitalise on information and communications technologies for learning in relation to these priorities and the apparent realities of the marketplace. It concludes that while there are grounds to be optimistic about the contribution EC programmes can make to the efficiency and standard of education and training, they are still too technology driven.     

一种自适应子融合集成多分类器方法

融合集成方法已经广泛应用在模式识别领域,然而一些基分类器实时性能稳定性较差,导致多分类器融合性能差,针对上述问题本文提出了一种新的基于多分类器的子融合集成分类器系统。该方法考虑在度量层融合层次之上通过对各类基多分类器进行动态选择,票数最多的类别作为融合系统中对特征向量识别的类别,构成一种新的自适应子融合集成分类器方法。实验表明,该方法比传统的分类器以及分类融合方法识别准确率明显更高,具有更好的鲁棒性。     

煤矿井下安全监控分站的设计及其仿真实现

为了设计一种具有低成本、低功耗、易操作、功能强且可靠性高的煤矿井下安全分站,针对煤矿安全生产实际,文章提出了采用MCS-51系列单片机为核心、具有CAN总线通信接口的煤矿井下安全监控分站的设计方案;首先给出煤矿井下安全监控分站的整体构架设计,然后着重阐述模拟量输入信号处理系统的设计过程,最后说明单片机最小系统及其键盘、显示、报警、通信等各个组成部分的设计;为验证设计方案的可行性与有效性,使用Proteus软件对设计内容进行仿真验证,设计的煤矿井下安全监控分站具有瓦斯、温度等模拟量参数超标报警功能和电机开停、风门开闭等开关量指示功能;仿真结果表明:设计的煤矿井下安全监控分站具有一定的实际应用价值.     

Avoiding semantic and temporal gaps in developing software intensive systems

Development of software intensive systems (systems) in practice involves a series of self-contained phases for the lifecycle of a system. Semantic and temporal gaps, which occur among phases and among developer disciplines within and across phases, hinder the ongoing development of a system because of the interdependencies among phases and among disciplines. Such gaps are magnified among systems that are developed at different times by different development teams, which may limit reuse of artifacts of systems development and interoperability among the systems. This article discusses such gaps and a systems development process for avoiding them.     

Designing economic np control charts: A programmed simulation approach

This paper presents control charts models and the necessary simulation software for the location of economic values of the control parameters. The simulation program is written in FORTRAN, requires only 10K of main storage, and can run on most mini and micro computers. Two models are presented - one describes the process when it is operating at full capacity and the other when the process is operating under capacity. The models allow the product quality to deteriorate to a further level before an existing out-of-control state is detected, and they can also be used in situations where no prior knowledge exists of the out-of-control causes and the resulting proportion defectives.     

The development of robot art

Going through a few examples of robot artists who are recognized worldwide, we try to analyze the deepest meaning of what is called “robot art” and the related art field definition. We also try to highlight its well-marked borders, such as kinetic sculptures, kinetic art, cyber art, and cyberpunk. A brief excursion into the importance of the context, the message, and its semiotics is also provided, case by case, together with a few hints on the history of this discipline in the light of an artistic perspective. Therefore, the aim of this article is to try to summarize the main characteristics that might classify robot art as a unique and innovative discipline, and to track down some of the principles by which a robotic artifact can or cannot be considered an art piece in terms of social, cultural, and strictly artistic interest. This work was presented in part at the 13th International Symposium on Artificial Life and Robotics, Oita, Japan, January 31–February 2, 2008     

Explanation and prediction: an architecture for default and abductive reasoning

Although there are many arguments that logic is an appropriate tool for artificial intelligence, there has been a perceived problem with the monotonicity of classical logic. This paper elaborates on the idea that reasoning should be viewed as theory formation where logic tells us the consequences of our assumptions. The two activities of predicting what is expected to be true and explaining observations are considered in a simple theory formation framework. Properties of each activity are discussed, along with a number of proposals as to what should be predicted or accepted as reasonable explanations. An architecture is proposed to combine explanation and prediction into one coherent framework. Algorithms used to implement the system as well as examples from a running implementation are given.     

View-based model-driven architecture for enhancing maintainability of data access services

In modern service-oriented architectures, database access is done by a special type of services, the so-called data access services (DAS). Though, particularly in data-intensive applications, using and developing DAS are very common today, the link between the DAS and their implementation, e.g. a layer of data access objects (DAOs) encapsulating the database queries, still is not sufficiently elaborated, yet. As a result, as the number of DAS grows, finding the desired DAS for reuse and/or associated documentation can become an impossible task. In this paper we focus on bridging this gap between the DAS and their implementation by presenting a view-based, model-driven data access architecture (VMDA) managing models of the DAS, DAOs and database queries in a queryable manner. Our models support tailored views of different stakeholders and are scalable with all types of DAS implementations. In this paper we show that our view-based and model driven architecture approach can enhance software development productivity and maintainability by improving DAS documentation. Moreover, our VMDA opens a wide range of applications such as evaluating DAS usage for DAS performance optimization. Furthermore, we provide tool support and illustrate the applicability of our VMDA in a large-scale case study. Finally, we quantitatively prove that our approach performs with acceptable response times.     

A pragmatic multi-method investigation of discrepant technological events: Coping,attributions, and ‘accidental’ learning

Discrepant technological events or situations that entail a problem, a misunderstanding or a difficulty with the Information Technology (IT) being employed, are common in the workplace, and can lead to frustration and avoidance behaviors. Little is known, however, about how individuals cope with these events. This paper examines these events by using a multi-method pragmatic approach informed by coping theory. The results of two studies – a critical incident study and an experiment – serve to build and test, respectively, a theoretical model that posits that individuals use a variety of strategies when dealing with these events: they experience negative emotions, make external attributions, and adopt engagement coping strategies directed at solving the event, eventually switching to a disengagement coping strategy when they feel they have no control over the situation. Furthermore, users’ efforts may result in ‘accidental’ learning as they try to overcome the discrepant IT events through engagement coping. The paper ends with a discussion of the results in light of existing literature, future opportunities for research, and implications for practice.