Phthalocyanine‐Based 2D Conjugated Metal‐Organic Framework Nanosheets for High‐Performance Micro‐Supercapacitors

2D conjugated metal‐organic frameworks (2D c‐MOFs) are emerging as a novel class of conductive redox‐active materials for electrochemical energy storage. However, developing 2D c‐MOFs as flexible thin‐film electrodes have been largely limited, due to the lack of capability of solution‐processing and integration into nanodevices arising from the rigid powder samples by solvothermal synthesis. Here, the synthesis of phthalocyanine‐based 2D c‐MOF (Ni₂[CuPc(NH)₈]) nanosheets through ball milling mechanical exfoliation method are reported. The nanosheets feature with average lateral size of ≈160 nm and mean thickness of ≈7 nm (≈10 layers), and exhibit high crystallinity and chemical stability as well as a p‐type semiconducting behavior with mobility of ≈1.5 cm² V^?1 s^?1 at room temperature. Benefiting from the ultrathin feature, the nanosheets allow high utilization of active sites and facile solution‐processability. Thus, micro‐supercapacitor (MSC) devices are fabricated mixing Ni₂[CuPc(NH)₈] nanosheets with exfoliated graphene, which display outstanding cycling stability and a high areal capacitance up to 18.9 mF cm^?2; the performance surpasses most of the reported conducting polymers‐based and 2D materials‐based MSCs.     

3D Micro‐Extrusion of Graphene‐based Active Electrodes: Towards High‐Rate AC Line Filtering Performance Electrochemical Capacitors

A facile one‐step printing process by 3D micro‐extrusion affording binder‐free thermally reduced graphene oxide (TRGO) based electrochemical capacitors (ECs) that display high‐rate performance is presented. Key intermediates are binder‐free TRGO dispersion printing inks with concentrations up to 15 g L^?1. This versatile printing technique enables easy fabrication of EC electrodes, useful in both aqueous and non‐aqueous electrolyte systems. The as‐prepared TRGO material with high specific surface area (SSA) of 593 m² g^?1 and good electrical conductivity of ≈16 S cm^?1 exhibits impressive charge storage performances. At 100 and 120 Hz, ECs fabricated with TRGO show time constants of 2.5 ms and 2.3 ms respectively. Very high capacitance values are derived at both frequencies ranging from 3.55 mF cm^?2 to 1.76 mF cm^?2. Additionally, these TRGO electrodes can be charged and discharged at very high voltage scan rates up to 15 V s^?1 yielding 4 F cm^?3 with 50% capacitance retention. Electrochemical performance of TRGO electrodes in electrolyte containing tetraethyl ammonium tetrafluoroborate and acetonitrile (TEABF4‐ACN) yields high energy density of 4.43 mWh cm^?3 and power density up to 42.74 kW cm^?3, which is very promising for AC line filtering application and could potentially substitute state of the art electrolytic capacitor technology.     

A Low‐Cost,Self‐Standing NiCo2O4@CNT/CNT Multilayer Electrode for Flexible Asymmetric Solid‐State Supercapacitors

The demand for a new generation of flexible, portable, and high‐capacity power sources increases rapidly with the development of advanced wearable electronic devices. Here we report a simple process for large‐scale fabrication of self‐standing composite film electrodes composed of NiCo₂O₄@carbon nanotube (CNT) for supercapacitors. Among all composite electrodes prepared, the one fired in air displays the best electrochemical behavior, achieving a specific capacitance of 1,590 F g^?1 at 0.5 A g^?1 while maintaining excellent stability. The NiCo₂O₄@CNT/CNT film electrodes are fabricated via stacking NiCo₂O₄@CNT and CNT alternately through vacuum filtration. Lightweight, flexible, and self‐standing film electrodes (≈24.3 µm thick) exhibit high volumetric capacitance of 873 F cm^?3 (with an areal mass of 2.5 mg cm^?2) at 0.5 A g^?1. An all‐solid‐state asymmetric supercapacitor consists of a composite film electrode and a treated carbon cloth electrode has not only high energy density (≈27.6 Wh kg^?1) at 0.55 kW kg^?1 (including the weight of the two electrodes) but also excellent cycling stability (retaining ≈95% of the initial capacitance after 5000 cycles), demonstrating the potential for practical application in wearable devices.     

3D Structural Strengthening Urchin‐Like Cu(OH)2‐Based Symmetric Supercapacitors with Adjustable Capacitance

Developing advanced three‐dimensional (3D) structural supercapacitors with both high capacity and good mechanical strength remains challenging. Herein, a novel road is reported for fabricating 3D structural strengthening supercapacitors with adjustable capacitance based on urchin‐like Cu(OH)₂ lattice electrodes by bridging 3D printing technology with a facile electroless plating and electro‐oxidation method. As revealed by the results, the 3D‐printed octet‐truss lattice electrode features a high volumetric capacitance of 8.46 F cm^?3 at 5 mA cm^?3 and superior retention capacity of 68% at 1 A cm^?3. The assembled symmetric supercapacitor with a 70.2% capacitance retention after 5000 cycles possesses a 12.8 Wh kg^?1 energy density at a power density of 2110.2 W kg^?1. Additionally, the resulting 3D structural strengthening electrodes can achieve both high compressive strength and toughness of 30 MPa and 264.7 kJ m^?3, respectively, demonstrating high mechanical strength and excellent antideformation capacity. With the proposed strategy, the electrochemical and mechanical properties of these novel 3D structural strengthened supercapacitors can be easily tuned by a simple spatial framework design, fulfilling the increasing demand of highly customized power sources in the space‐constrained microelectronics and astronautic electronics industries.     

Flexible Solid‐State Supercapacitor Based on Graphene‐based Hybrid Films

A flexible solid‐state asymmetric supercapacitor based on bendable film electrodes with 3D expressway‐like architecture of graphenes and “hard nano‐spacer” is fabricated via an extended filtration assisted method. In the designed structure of the positive electrode, graphene sheets are densely packed, and Ni(OH)₂ nanoplates are intercalated in between the densely stacked graphenes. The 3D expressway‐like electrodes exhibit superior supercapacitive performance including high gravimetric capacitance (≈573 F g^‐1), high volumetric capacitance (≈655 F cm^‐3), excellent rate capability, and superior cycling stability. In addition, another hybrid film of graphene and carbon nanotubes (CNT) is fabricated as the negative electrodes for the designed asymmetric device. In the obtained graphene@CNT films, CNTs served as the hard spacer to prevent restacking of graphene sheets but also as a conductive and robust network to facilitate the electrons collection/transport in order to fulfill the demand of high‐rate performance of the asymmetric supercapacitor. Based on these two hybrid electrode films, a solid‐state flexible asymmetric supercapacitor device is assembled, which is able to deliver competitive volumetric capacitance of 58.5 F cm^‐3 and good rate capacity. There is no obvious degradation of the supercapacitor performance when the device is in bending configuration, suggesting the excellent flexibility of the device.     

Multilayer‐Folded Graphene Ribbon Film with Ultrahigh Areal Capacitance and High Rate Performance for Compressible Supercapacitors

Limited by 2D geometric morphology and low bulk packing density, developing graphene‐based flexible/compressible supercapacitors with high specific capacitances (gravimetric/volumetric/areal), especially at high rates, is an outstanding challenge. Here, a strategy for the synthesis of free‐standing graphene ribbon films (GRFs) for high‐performance flexible and compressible supercapacitors through blade‐coating of interconnected graphene oxide ribbons and a subsequent thermal treatment process is reported. With an ultrahigh mass loading of 21 mg cm^?2, large ion‐accessible surface area, efficient electron and ion transport pathways as well as high packing density, the compressed multilayer‐folded GRF films (F‐GRF) exhibit ultrahigh areal capacitance of 6.7 F cm^?2 at 5 mA cm^?2, high gravimetric/volumetric capacitances (318 F g^?1, 293 F cm^?3), and high rate performance (3.9 F cm^?2 at 105 mA cm^?2), as well as excellent cycling stability (109% of capacitance retention after 40 000 cycles). Furthermore, the assembled F‐GRF symmetric supercapacitor with compressible and flexible characteristics, can deliver an ultrahigh areal energy density of 0.52 mWh cm^?2 in aqueous electrolyte, almost two times higher than the values obtained from symmetric supercapacitors with comparable dimensions.     

Flexible Cellulose Paper‐based Asymmetrical Thin Film Supercapacitors with High‐Performance for Electrochemical Energy Storage

Cellulose paper (CP)‐based asymmetrical thin film supercapacitors (ATFSCs) have been considered to be a novel platform for inexpensive and portable devices as the CP is low‐cost, lightweight, and can be rolled or folded into 3D configurations. However, the low energy density and poor cycle stability are serious bottlenecks for the development of CP‐based ATFSCs. Here, sandwich‐structured graphite/Ni/Co₂NiO₄‐CP is developed as positive electrode and the graphite/Ni/AC‐CP as negative electrode for flexible and high‐performance ATFSCs. The fabricated graphite/Ni/Co₂NiO₄‐CP positive electrode shows a superior areal capacitance (734 mF/cm² at 5 mV/s) and excellent cycling performance with ≈97.6% C_sp retention after 15 000 cycles. The fabricated graphite/Ni/AC‐CP negative electrode also exhibits large areal capacitance (180 mF/cm² at 5 mV/s) and excellent cycling performance with ≈98% C_sp retention after 15 000 cycles. The assembled ATFSCs based on the sandwich‐structured graphite/Ni/Co₂NiO₄‐CP as positive electrode and graphite/Ni/AC‐CP as negative electrode exhibit large volumetric C_sp (7.6 F/cm³ at 5 mV/s), high volumetric energy density (2.48 mWh/cm³, 80 Wh/kg), high volumetric power density (0.79 W/cm³, 25.6 kW/kg) and excellent cycle stability (less 4% C_sp loss after 20 000 cycles). This study shows an important breakthrough in the design and fabrication of high‐performance and flexible CP‐based electrodes and ATFSCs.     

Morphology Reshaping Enabling Self‐Densification of Manganese Oxide Hybrid Materials for High‐Density Lithium Storage Anodes

Morphology reshaping or reconfiguration, a concept widely used in plastic surgery, energy harvesting, and reconfigurable robots, is introduced for the first time to construct densified electrodes and realize compact Li‐ion storage desirable for high specific energy storage field. Hausmannite‐based hybrid materials, as a proof‐of‐concept prototype, engineered by 1‐methyl‐2‐pyrrolidinone‐soluble surface/interface organic encapsulation, which is crucial in reshaping, exhibit a remarkable increase in the volumetric capacity of more than five times after this process (≈1889 Ah L^?1 vs ≈322 Ah L^?1). With the simultaneous maintenance of the intrinsic nature, good contact, and no collapsed/agglomerated unit structures of the materials in electrodes, the design affords a maximal increase in the packing compactness and manifests no sacrifice of the reversible ion storage capability (1150 mAh g^?1 at 40 mA g^?1), stable cycling (≈100% capacity retention), high rate performance (185 mAh g^?1 at 10 A g^?1), and long lifespan (1000 cycles with 108% capacity retention, ≈455 mAh g^?1 at 3 A g^?1) for relatively highly loaded electrodes (active materials: 1.20–5.34 mg cm^?2). The concept may not only shed new light on fabricating advanced Si‐based and other high capacity–related densified Li storage electrodes but also inject fresh vitality into the field of high‐density power sources.     

Oxygen‐Deficient Bismuth Oxide/Graphene of Ultrahigh Capacitance as Advanced Flexible Anode for Asymmetric Supercapacitors

Oxygen‐deficient bismuth oxide (r‐Bi₂O₃)/graphene (GN) is designed, fabricated, and demonstrated via a facile solvothermal and subsequent solution reduction method. The ultrafine network bacterial cellulose (BC) as substrate for r‐Bi₂O₃/GN exhibits high flexibility, remarkable tensile strength (55.1 MPa), and large mass loading of 9.8 mg cm^?2. The flexible r‐Bi₂O₃/GN/BC anode delivers appreciable areal capacitance (6675 mF cm^?2 at 1 mA cm^?2) coupled with good rate capability (3750 mF cm^?2 at 50 mA cm^?2). In addition, oxygen vacancies have great influence on the capacitive performance of Bi₂O₃, delivering significantly improved capacitive values than the untreated Bi₂O₃ flexible electrode, and ultrahigh gravimetric capacitance of 1137 F g^?1 (based on the mass of r‐Bi₂O₃) can be obtained, achieving 83% of the theoretical value (1370 F g^?1). Flexible asymmetric supercapacitor is fabricated with r‐Bi₂O₃/GN/BC and Co₃O₄/GN/BC paper as the negative and positive electrodes, respectively. The operation voltage is expanded to 1.6 V, revealing a maximum areal energy density of 0.449 mWh cm^?2 (7.74 mWh cm^?3) and an areal power density of 40 mW cm^?2 (690 mW cm^?3). Therefore, this flexible anode with excellent electrochemical performance and high mechanical properties shows great potential in the field of flexible energy storage devices.     

Hierarchical NiMoS and NiFeS Nanosheets with Ultrahigh Energy Density for Flexible All Solid‐State Supercapacitors

Highly flexible supercapacitors (SCs) have great potential in modern electronics such as wearable and portable devices. However, ultralow specific capacity and low operating potential window limit their practical applications. Herein, a new strategy for the fabrication of free‐standing Ni?Mo?S and Ni?Fe?S nanosheets (NSs) for high‐performance flexible asymmetric SC (ASC) through hydrothermal and subsequent sulfurization technique is reported. The effect of Ni²⁺ is optimized to attain hierarchical Ni?Mo?S and Ni?Fe?S NS architectures with high electrical conductivity, large surface area, and exclusive porous networks. Electrochemical properties of Ni?Mo?S and Ni?Fe?S NS electrodes exhibit that both have ultrahigh specific capacities (≈312 and 246 mAh g^?1 at 1 mA cm^?2), exceptional rate capabilities (78.85% and 78.46% capacity retention even at 50 mA cm^?2, respectively), and superior cycling stabilities. Most importantly, a flexible Ni?Mo?S NS//Ni?Fe?S NS ASC delivers a high volumetric capacity of ≈1.9 mAh cm^?3, excellent energy density of ≈82.13 Wh kg^?1 at 0.561 kW kg^?1, exceptional power density (≈13.103 kW kg^?1 at 61.51 Wh kg^?1) and an outstanding cycling stability, retaining ≈95.86% of initial capacity after 10 000 cycles. This study emphasizes the potential importance of compositional tunability of the NS architecture as a novel strategy for enhancing the charge storage properties of active electrodes.     

High‐Performance Mesostructured Organic Hybrid Pseudocapacitor Electrodes

The electrodes of a hybrid electrochemical capacitor which utilize the quinone (Q)‐hydroquinone (QH₂) couple, a prototypical organic redox system known to provide fast and reversible proton‐coupled electron‐transfer reactions, are deterministically mesostructured via a colloidal templating strategy to provide good ion and electron transport pathways, enabling a high rate performance. Specifically, a conducting polymer, polypyrrole (PPy), is functionalized with a pseudocapacitive material, a Q/QH₂‐containing catechol derivative, by noncovalent interactions. The mesostructure of this hybrid material is formed into an ordered 3D porous structure by a polystyrene colloidal crystal template‐assisted electrosynthesis. The catechol derivative is sufficiently bound to the PPy through noncovalent interactions to provide a volumetric capacitance as high as ≈130 F cm^?3 and a capacitance retention of ≈75% over 10 000 charging/discharging cycles. When compared with a randomly structured electrode, the deterministically structured electrode exhibits an improved rate performance due to the mesostructure facilitated electron and ion transport.     

Cactus‐Like NiCoP/NiCo‐OH 3D Architecture with Tunable Composition for High‐Performance Electrochemical Capacitors

To effectively enhance the energy density and overall performance of electrochemical capacitors (ECs), a new strategy is demonstrated to increase both the intrinsic activity of the reaction sites and their density. Herein, nickel cobalt phosphides (NiCoP) with high activity and nickel cobalt hydroxides (NiCo‐OH) with good stability are purposely combined in a hierarchical cactus‐like structure. The hierarchical electrode integrates the advantages of 1D nanospines for effective charge transport, 2D nanoflakes for mechanical stability, and 3D carbon cloth substrate for flexibility. The NiCoP/NiCo‐OH 3D electrode delivers a high specific capacitance of ≈1100 F g^?1, which is around seven times higher than that of bare NiCo‐OH. It also possesses ≈90% capacitance retention after 1000 charge–discharge cycles. An asymmetric supercapacitor composed of NiCoP/NiCo‐OH cathode and metal–organic framework‐derived porous carbon anode achieves a specific capacitance of ≈100 F g^?1, high energy density of ≈34 Wh kg^?1, and excellent cycling stability. The cactus‐like NiCoP/NiCo‐OH 3D electrode presents a great potential for ECs and is promising for other functional applications such as catalysts and batteries.     

Boosting the Electrical Double‐Layer Capacitance of Graphene by Self‐Doped Defects through Ball‐Milling

Improving the capacitance of carbon materials for supercapacitors without sacrificing their rate performance, especially volumetric capacitance at high mass loadings, is a big challenge because of the limited assessable surface area and sluggish electrochemical kinetics of the pseudocapacitive reactions. Here, it is demonstrated that “self‐doping” defects in carbon materials can contribute to additional capacitance with an electrical double‐layer behavior, thus promoting a significant increase in the specific capacitance. As an exemplification, a novel defect‐enriched graphene block with a low specific surface area of 29.7 m² g^?1 and high packing density of 0.917 g cm^?3 performs high gravimetric, volumetric, and areal capacitances of 235 F g^?1, 215 F cm^?3, and 3.95 F cm^?2 (mass loading of 22 mg cm^?2) at 1 A g^?1, respectively, as well as outstanding rate performance. The resulting specific areal capacitance reaches an ultrahigh value of 7.91 F m^?2 including a “self‐doping” defect contribution of 4.81 F m^?2, which is dramatically higher than the theoretical capacitance of graphene (0.21 F m^?2) and most of the reported carbon‐based materials. Therefore, the defect engineering route broadens the avenue to further improve the capacitive performance of carbon materials, especially for compact energy storage under limited surface areas.     

Rationally Engineered Electrodes for a High‐Performance Solid‐State Cable‐Type Supercapacitor

Wire‐shaped electrodes for solid‐state cable‐type supercapacitors (SSCTS) with high device capacitance and ultrahigh rate capability are prepared by depositing poly(3,4‐ethylenedioxythiophene) onto self‐doped TiO₂ nanotubes (D‐TiO₂) aligned on Ti wire via a well‐controlled electrochemical process. The large surface area, short ion diffusion path, and high electrical conductivity of these rationally engineered electrodes all contribute to the energy storage performance of SSCTS. The cyclic voltammetric studies show the good energy storage ability of the SSCTS even at an ultrahigh scan rate of 1000 V s^?1, which reveals the excellent instantaneous power characteristics of the device. The capacitance of 1.1 V SSCTS obtained from the charge–discharge measurements is 208.36 µF cm^?1 at a discharge current of 100 µA cm^?1 and 152.36 µF cm^?1 at a discharge current of 2000 µA cm^?1, respectively, indicating the ultrahigh rate capability. Furthermore, the SSCTS shows superior cyclic stability during long‐term (20 000 cycles) cycling, and also maintains excellent performance when it is subjected to bending and succeeding straightening process.     

Highly Stretchable,High‐Mobility,Free‐Standing All‐Organic Transistors Modulated by Solid‐State Elastomer Electrolytes

Highly stretchable, high‐mobility, and free‐standing coplanar‐type all‐organic transistors based on deformable solid‐state elastomer electrolytes are demonstrated using ionic thermoplastic polyurethane (i‐TPU), thereby showing high reliability under mechanical stimuli as well as low‐voltage operation. Unlike conventional ionic dielectrics, the i‐TPU electrolyte prepared herein has remarkable characteristics, i.e., a large specific capacitance of 5.5 µF cm^?2, despite the low weight ratio (20 wt%) of the ionic liquid, high transparency, and even stretchability. These i‐TPU‐based organic transistors exhibit a mobility as high as 7.9 cm² V^?1 s^?1, high bendability (R_c, radius of curvature: 7.2 mm), and good stretchability (60% tensile strain). Moreover, they are suitable for low‐voltage operation (V_DS = ?1.0 V, V_GS = ?2.5 V). In addition, the electrical characteristics such as mobility, on‐current, and threshold voltage are maintained even in the concave and convex bending state (bending tensile strain of ≈3.4%), respectively. Finally, free‐standing, fully stretchable, and semi‐transparent coplanar‐type all‐organic transistors can be fabricated by introducing a poly(3,4‐ethylenedioxythiophene):polystyrene sulfonic acid layer as source/drain and gate electrodes, thus achieving low‐voltage operation (V_DS = ?1.5 V, V_GS = ?2.5 V) and an even higher mobility of up to 17.8 cm² V^?1 s^?1. Moreover, these devices withstand stretching up to 80% tensile strain.     

Ultrahigh‐Strength Ultrahigh Molecular Weight Polyethylene (UHMWPE)‐Based Fiber Electrode for High Performance Flexible Supercapacitors

Flexible fiber‐based supercapacitor (FSC) with excellent electrochemical performance and high tensile strength and modulus is strongly desired for some special circumstances, such as load‐bearing, abrasion resistant, and anticutting fabrics. Here, a series of ultrahigh‐strength fiber electrodes are prepared for flexible FSCs based on ultrahigh molecular weight polyethylene fibers, on which the polydopamine, Ag, and poly (3,4‐ethylene dioxythiophene): poly(styrenesulfonate) are deposited in sequence. The modified fiber‐based electrode exhibits superhigh strength up to 3.72 GPa, which is the highest among fiber‐based electrodes reported to date. In addition, FSCs fabricated with the optimized fiber electrode shows a specific areal capacity as high as 563 mF cm^?2 at 0.17 mA cm^?2, which corresponds to a high areal energy density of ≈50.1 µWh cm^?2 at a power density of ≈124 µW cm^?2. The specific areal capacity only decrease 8% after 1000 times bending test, indicating the outstanding bending performance of this composite fiber electrode. Furthermore, several FSCs can be connected in series or in parallel to get higher working voltage or higher capacity respectively, which demonstrates its potential for broad applications in flexible devices.     

Development of Graphene Oxide/Polyaniline Inks for High Performance Flexible Microsupercapacitors via Extrusion Printing

Extrusion printing of interdigitated electrodes for flexible microsupercapacitors (fMSCs) offers an attractive route to the fabrication of flexible devices where cost, scalability, and processability of ink formulations are critical. In this work, highly concentrated, viscous, and water‐dispersible inks are developed based on graphene oxide (GO)/polyaniline (PANi) composite for extrusion printing. The optimized GO/PANi‐based all‐solid‐state symmetric fMSCs obtained by extrusion printing interdigitated microelectrodes can deliver outstanding areal capacitance of 153.6 mF cm^?2 and volumetric capacitance of 19.2 F cm^?3 at 5 mV s^?1. It is shown that by fabricating asymmetric fMSCs using the GO/PANi as positive electrode and a graphene‐based negative electrode, the voltage window can be widened from 0.8 to 1.2 V and improvements can be achieved in energy density (from 3.36 to 4.83 mWh cm^?3), power density (from 9.82 to 25.3 W cm^?3), and cycling stability (from 75% to 100% capacitance retention over 5000 cycles) compared with the symmetric counterpart. The simple ink preparation and facile device fabrication protocols reported here make the scalable fabrication of extrusion printed fMSCs a promising technology.     

Molecular Design of Mesoporous NiCo2O4 and NiCo2S4 with Sub‐Micrometer‐Polyhedron Architectures for Efficient Pseudocapacitive Energy Storage

Spinel‐type NiCo₂O₄ (NCO) and NiCo₂S₄ (NCS) polyhedron architectures with sizes of 500–600 nm and rich mesopores with diameters of 1–2 nm are prepared facilely by the molecular design of Ni and Co into polyhedron‐shaped zeolitic imidazolate frameworks as solid precursors. Both as‐prepared NCO and NCS nanostructures exhibit excellent pseudocapacitance and stability as electrodes in supercapacitors. In particular, the exchange of O^2? in the lattice of NCO with S^2? obviously improves the electrochemical performance. NCS shows a highly attractive capacitance of 1296 F g^?1 at a current density of 1 A g^?1, ultrahigh rate capability with 93.2% capacitance retention at 10 A g^?1, and excellent cycling stability with a capacitance retention of 94.5% after cycling at 1 A g^?1 for 6000 times. The asymmetric supercapacitor with an NCS negative electrode and an active carbon positive electrode delivers a very attractive energy density of 44.8 Wh kg^?1 at power density 794.5 W kg^?1, and a favorable energy density of 37.7 Wh kg^?1 is still achieved at a high power density of 7981.1 W kg^?1. The specific mesoporous polyhedron architecture contributes significantly to the outstanding electrochemical performances of both NCO and NCS for capacitive energy storage.     

Highly Conductive Ordered Mesoporous Carbon Based Electrodes Decorated by 3D Graphene and 1D Silver Nanowire for Flexible Supercapacitor

Ordered mesoporous carbon (OMC) is considered one of the most promising materials for electric double layer capacitors (EDLC) given its low‐cost, high specific surface area, and easily accessed ordered pore channels. However, pristine OMC electrode suffers from poor electrical conductivity and mechanical flexibility, whose specific capacitance and cycling stability is unsatisfactory in flexible devices. In this work, OMC is coated on the surface of highly conductive three‐dimensional graphene foam, serving as both charge collector and flexible substrate. Upon further decoration with silver nanowires (Ag NWs), the novel architecture of Ag NWs/3D‐graphene foam/OMC (Ag‐GF‐OMC) exhibits exceptional electrical conductivity (up to 762 S cm^?1) and mechanical robustness. The Ag‐GF‐OMC electrodes in flexible supercapacitors reach a specific capacitance as high as 213 F g^?1, a value five‐fold higher than that of the pristine OMC electrode. Moreover, these flexible electrodes also exhibit excellent long‐term stability with >90% capacitance retention over 10 000 cycles, as well as high energy and power density (4.5 Wh kg^?1 and 5040 W kg^?1, respectively). This study provides a new procedure to enhance the device performance of OMC based supercapacitors, which is a promising candidate for the application of flexible energy storage devices.     

Scalable Production of Graphene Inks via Wet‐Jet Milling Exfoliation for Screen‐Printed Micro‐Supercapacitors

The miniaturization of energy storage units is pivotal for the development of next‐generation portable electronic devices. Micro‐supercapacitors (MSCs) hold great potential to work as on‐chip micro‐power sources and energy storage units complementing batteries and energy harvester systems. Scalable production of supercapacitor materials with cost‐effective and high‐throughput processing methods is crucial for the widespread application of MSCs. Here, wet‐jet milling exfoliation of graphite is reported to scale up the production of graphene as a supercapacitor material. The formulation of aqueous/alcohol‐based graphene inks allows metal‐free, flexible MSCs to be screen‐printed. These MSCs exhibit areal capacitance (C_areal) values up to 1.324 mF cm^?2 (5.296 mF cm^?2 for a single electrode), corresponding to an outstanding volumetric capacitance (C_vol) of 0.490 F cm^?3 (1.961 F cm^?3 for a single electrode). The screen‐printed MSCs can operate up to a power density above 20 mW cm^?2 at an energy density of 0.064 µWh cm^?2. The devices exhibit excellent cycling stability over charge–discharge cycling (10 000 cycles), bending cycling (100 cycles at a bending radius of 1 cm) and folding (up to angles of 180°). Moreover, ethylene vinyl acetate‐encapsulated MSCs retain their electrochemical properties after a home‐laundry cycle, providing waterproof and washable properties for prospective application in wearable electronics.