Properties and morphologies of elastomer blends modified with EPDM‐g‐poly[2‐dimethylamino ethylmethacrylate]

The graft copolymerization of 2‐dimethylamino ethylmethacrylate (DMAEMA) onto ethylene propylene diene mononer rubber (EPDM) was carried out in toluene via solution polymerization technique at 70°C, using dibenzoyl peroxide as initiator. The synthesized EPDM rubber grafted with poly[DMAEMA] (EPDM‐g‐PDMAEMA) was characterized with ¹H‐NMR spectroscopy, gel permeation chromatography (GPC), differential scanning calorimetry (DSC), and thermal gravimetric analysis (TGA). The EPDM‐g‐PDMAEMA was incorporated into EPDM/butadiene acrylonitrile rubber (EPDM/NBR) blend with different blend ratios, where the homogeneity of such blends was examined with scanning electron microscopy and DSC. The scanning electron micrographs illustrate improvement of the morphology of EPDM/NBR rubber blends as a result of incorporation of EPDM‐g‐PDMAEMA onto that blend. The DSC trace exhibits one glass transition temperature (T_g) for EPDM/NBR blend containing EPDM‐g‐PDMAEMA, indicating improvement of homogeneity. The physico‐mechanical properties after and before accelerated thermal aging of the homogeneous, and inhomogeneous EPDM/NBR vulcanizates with different blend ratios were investigated. The physico‐mechanical properties of all blend vulcanizates were improved after and before accelerated thermal aging, in presence of EPDM‐g‐PDMAEMA. Of all blend ratios under investigation EPDM/NBR (75/25) blend possesses the best physico‐mechanical properties together with the best (least) swelling (%) in brake fluid. Swelling behavior of the rubber blend vulcanizates in motor oil and toluene was also investigated. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Morphology,rheology, and mechanical properties of dynamically cured EPDM/PP blend: Effect of curing agent dose variation

The structure development, rheological behavior, viscoelastic, and mechanical properties of dynamically cured blend based on the ethylene–propylene–diene terpolymer (EPDM) and polypropylene (PP) with a ratio of 60/40 by weight were studied. The variation of two‐phase morphology was observed and compared as the level of curing agent was increased. Meanwhile, as the level of curing agent increased, viscosity as a function of shear stress always increased at a shear stress range of 2.2 × 10⁴ to 3.4 × 10⁵ Pa at the temperature of 200°C, yet viscosity of the blend approached each other at high shear stress. Dynamic mechanical spectra at different temperatures show that dynamic modulus (E′) of the blend exhibits two drastic transitions corresponding to glass transition temperature (T_g) of EPDM and T_g of PP, respectively. In the blends T_gs of EPDM increase and T_gs of PP almost remain unchangeable with an increase in curing agent level. Tensile strength increased, yet elongation at break decreased as the level of curing agent is increased. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 357–362, 2004     

Rheological properties and compatibility of NR/EPDM and NR/brominated EPDM blends

Ethylene–propylene–diene terpolymer (EPDM) was modified by bromination reaction. Blending the resulting brominated EPDM with natural rubber (STR5L) and blending the unmodified EPDM with STR5L at various compositions were carried out. The rheological properties of the blends were investigated using a capillary extrusion. Shear flow curves of the pure rubbers and their blends illustrated the pseudoplastic property as shear thinning behavior with a power law index n < 1. True shear viscosity of all blends showed the negative deviation in relation to their additive values. Rheological behavior and two T_g's found from the DSC thermograms at all blend compositions indicated blend incompatibility for both sets of blends. The incompatibility of the vulcanized blends was also found by measuring the spin–spin relaxation time T₂ by pulsed NMR. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 837–847, 2003     

Curing of a tetrafluoroethylene–propylene elastomer with high-vinyl polybutadiene rubber and peroxide

A cocuring agent is necessary for tetrafluoroethylene–propylene elastomer (FEPM), which cannot be cured by peroxide alone. We observed that high-vinyl polybutadiene rubber (HVBR) could be used as a cocuring agent for FEPM. The structure and properties of FEPM–HVBR blend vulcanizates were investigated by ¹³C-NMR, differential scanning calorimetry, swelling tests, tensile tests, dynamic mechanical analysis, and thermogravimetric analysis. This research showed that HVBR significantly improved FEPM by conferring a high crosslink degree to the FEPM–HVBR blends. When the HVBR concentration was 25% without any filler reinforcement, the tensile strength of the FEPM–HVBR blend vulcanizate reached 11.6 MPa, and the crosslinking density reached 171 μmol/cm³. In addition, HVBR improved the thermal stability of FEPM and changed the glass-transition temperature (T _g) of the blend; as the HVBR content increased, the T _g of the blend also increased. ¹³C-NMR analysis confirmed that crosslinks existed between the HVBR and FEPM macromolecules. When the blends contained trace amounts of HVBR, free-radical reaction was more preferred between FEPM and HVBR, whereas when HVBR was 15% or more, crosslinking between HVBR was predominant. These findings expand the choices for the curing of FEPM. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47836.     

Natural rubber/ethylene propylene diene blends for high insulation iron crossarms

This research studied the composition and behavior of natural rubber (NR) and ethylene propylene diene monomer (EPDM) blends at various carbon black concentrations (0–30 phr) in terms of electrical resistivity, dielectric breakdown voltage testing, and physical properties. The blends having electrical properties suitable for application in high‐insulation iron crossarms were selected for investigation of compatibility and increased physical properties. The effect of the homogenizing agent concentration on improvement of compatibility of blends was studied by scanning electron microscopy, pulsed nuclear magnetic resonance spectroscopy, and rheology techniques. We also examined mechanical properties such as tensile strength, tear strength, elongation at break, and hardness. The NR/EPDM blends filled with a fixed concentration of silica were investigated for ozone resistance. A carbon black content as high as 10 phr is still suitable for the insulation coating material, which can withstand electrical voltage at 10 kVac. Addition of the homogenizing agent at 5 phr can improve the mechanical compatibility of blends, as evidenced by the positive deviation of shear viscosity of the rubber blend, that is, the calculated shear viscosity being higher than that of experimental data. Moreover, the pulsed NMR results indicated that the spin‐spin relaxation (T₂) of all three components of the rubber blend was compressed upon the addition of the homogenizing agent. The ratio of NR/EPDM in the blend to best resist the ozone gas is 80/20 with the addition of silica of 30 phr into the blend. Also, the NR/EPDM filled with silica had a decreased change in thermal and mechanical properties of blends after thermal aging. The synergistic effect of silica content and high NR content (80) in 20 phr EPDM could improve antioxidation by ozone in the absence of a normal antioxidant for natural rubber. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 3401–3416, 2004     

Influence of Copolymer Composition and Curing on Toughness of Isotactic Polypropene Blended Together with Metallocene‐EPDM and Ethene/Propene/Vinylcyclohexane Terpolymers

Ethene/propene terpolymers containing either 1‐vinylcylohexene‐4 (VCHen) or vinylcyclohexane (VCHan) as termonomer component were prepared using MAO‐activated rac‐Me₂Si(2‐MeBenz[e]Ind)₂ZrCl₂ (MBI). Propene content was varied between 26 and 72 wt.‐% with less than 1 mol‐% termonomer incorporation. Blends containing 85 vol.‐% isotactic polypropene (i‐PP) and 15 vol.‐% of the two EP terpolymer families were prepared by melt‐compounding in a twin‐screw kneader at 200°C to examine the role of sulfur‐mediated crosslinking of the unsaturated EPDM terpolymer phase in comparison to the corresponding blends containing non‐crosslinked saturated EP/VCHan terpolymers. The observed glass temperature (T_g) depression of the T_g of EP(D)M phases with respect to the T_g of the corresponding bulk EP(D)M was attributed to the presence of thermally induced stresses in both blend systems. Blends of i‐PP with crosslinked EPDM showed smaller T_g depression with respect to those of iPP/EPM blends containing non‐crosslinked EP and EPM dispersed phases. Morphology differences were detected for i‐PP/EPM and dynamically vulcanized i‐PP/EPDM blends by means of atomic force microscopy (AFM). The crosslinked i‐PP/EPDM blends exhibited significantly improved low temperature toughness as compared to the corresponding non‐crosslinked i‐PP/EPM blends. Curing of the EPDM elastomer phase in i‐PP/EPDM (85 vol.‐%/15 vol.‐%) blends afforded significantly improved toughness/stiffness balance and a wider toughness window with respect to the corresponding i‐PP/EPM and i‐PP/EP blends without sulfur‐cured rubber phases.     

Effects of fillers,maleated ethylene propylene diene diene rubber,and maleated ethylene octene copolymer on phase morphology and oil resistance in natural rubber/nitrile rubber blends

The phase morphology and oil resistance of 20/80 NR/NBR blends filled with different types of fillers and copolymers were investigated. In the case of filler effect, N220, N330, and N660 carbon blacks with different particle sizes were used. Additionally, the blends filled with nonblack‐reinforcing fillers, that is, precipitated and silane‐treated silica, were investigated. To study the compatibilization effect, maleated ethylene propylene diene rubber (EPDM‐g‐MA) and maleated ethylene octene copolymer (EOR‐g‐MA) were added to the blends. The results revealed that the addition of filler, either carbon black or silica, to the blend caused a drastic decrease in NR dispersed phase size. Carbon blacks with different particle sizes did not produce any significant difference in NR dispersed phase size under the optical microscope. Silica‐filled blends showed lower resistance to oil than did the carbon black–filled blends. In addition, it was determined that neither EOR‐g‐MA nor EPDM‐g‐MA could act as a compatibilizer for the blend system studied. The oil resistance of the blends with EPDM‐g‐MA is strongly affected by the overall polarity of the blend. In the case of EOR‐g‐MA, the oil resistance of the blends is significantly governed by both overall polarity of the blend and phase morphology. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 1156–1162, 2003     

Properties of copolymer-type polyacetal/ethylene–propylene–diene terpolymer blends

Two kinds of polymer blends, polyacetals (POMs) and ethylene–propylene–diene terpolymer (EPDM), have been prepared by mechanical blending. The rubbery EPDM was added to the rigid POM matrix to increase toughness. The mechanical, physical, thermal, dynamic mechanical, and morphological properties of these samples have been measured. The notched Izod impact strength and the elongation of the blends reaches a maximum at 7.5 wt % EPDM content. Scanning electron micrographs (SEM) showed that the domain sizes of EPDM vary from 0.25 to 1.0 μm and were independent of the composition. The POM/EPDM blends were determined to be immiscible by SEM, but showed single T_g behavior as determined by differential scanning calorimetry (DSC) and dynamic mechanical analyses up to 7.5 wt % EPDM. Because of that, the T_g's of POM and EPDM were very similar in value. © 1993 John Wiley & Sons, Inc.     

Studies on Ethylene Propylene Diene Rubber and Thermoplastic Polyurethane Blends: The Effect of Maleation

Blends of maleated ethylene propylene diene rubber (EPDM) and thermoplastic polyurethane (TPU) have been studied to understand the effect of the maleation level of EPDM on the compatibility and morphology of the blends. Blends with different maleation levels on EPDM (0.25, 0.50, and 0.75 wt%) were compared for mechanical, thermal, and other properties. The appearance of single T _g for 0.5% and 0.75% confirms that a maleation level of more than 0.5 wt% is required for EPDM blends with TPU. However, best mechanical properties are obtained for 0.5% maleated EPDM and TPU blends. Aging, filler reinforcement, and weather resistance measurements were also studied for the blends of varying maleation levels.     

PET/PC blends: Effect of chain extender and impact strength modifier on their structure and properties

Methylene diphenyl diisocyanate (MDI) affects the morphology, rheological, mechanical, and relaxation properties, as well as tendency to crystallize of PET in PET/PC/(PP/EPDM) ternary blends produced by the reactive extrusion. Irrespective of the blend phase structure, the introduction of MDI increases the melt viscosity (MFI dropped), resulting from an increase in the molecular weight of the polymer chains; the PET crystallinity was also reduced. MDI favors compatibility of PET with PC in PET/PC/(PP/EPDM) blends. This is explained by intensified interphase interactions on the level of segments of macromolecules as well as monomer units. The presence of MDI causes a substantial rise in the dynamic shear modulus within the high‐elastic region of PET (for temperature range between T_g,PET and that of PET cold crystallization); the processes of PET cold crystallization and melt crystallization become retarded; the glass‐transition temperatures for PET and PC become closer to each other. MDI affects insignificantly the blend morphology or the character of interactions between the disperse PP/EPDM blend and PET/PC as a matrix. PP/EPDM reduces the intensity of interphase interactions in a PET/PC/(PP/EPDM), but a rise in the degree of material heterogeneity. MDI does not change the mechanism of impact break‐down in the ternary blends mentioned above. Increased impact strength of MDI‐modified materials can be explained by higher cohesive strength and resistance to shear flow at impact loading. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Mechanical,thermal, and morphological characteristics of compatibilized and dynamically vulcanized polyoxymethylene/ethylene propylene diene terpolymer blends

Dynamically vulcanized blends of polyoxymethylene (POM) and ethylene propylene diene terpolymer (EPDM) with and without compatibilizer were prepared by melt mixing in a twin screw extruder. Maleic anhydride (MAH) grafted EPDM (EPDM‐g‐MAH) has been used as a compatibilizer. Dicumyl peroxide was used for vulcanizing the elastomer phase in the blends. Mechanical, dynamical mechanical, thermal, and morphological properties of the blend systems have been investigated as a function of blend composition and compatibilizer content. The impact strength of both dynamically vulcanized blends and compatibilized/dynamically vulcanized blends increases with increase in elastomer content with decrease in tensile strength. Dynamic mechanical analysis shows decrease in tanδ values as the elastomer and compatibilizer content increased. Thermograms obtained from differential scanning calorimetric studies reveal that compatibilized blends have lower T_m values compared to dynamically vulcanized blends, which confirms strong interaction between the plastic and elastomer phase. Scanning electron microscopic observations on impact fractured surface indicate reduction in particle size of elastomer phase and its high level of dispersion in the POM matrix. In the case of compatibilized blends high degree of interaction between the component polymers has been observed. POLYM. ENG. SCI., 47:934–942, 2007. © 2007 Society of Plastics Engineers     

Differential scanning calorimetric and free volume study of reactive compatibilization by EPM‐g‐MA of poly(trimethylene terephthalate)/EPDM blends

Differential scanning calorimetry (DSC) and positron annihilation lifetime measurements have been carried out to study the effect of the compatibilizer maleic anhydride grafted ethylene propylene copolymer (EPM‐g‐MA) in poly trimethylene terephthalate and ethylene propylene diene monomer (PTT/EPDM) immiscible blends. The DSC results for the blends of 50/50 and 30/70 compositions show two clear glass transition temperatures, indicating that the blends are two‐phase systems. With the addition of compatibilizer, the separation between the two glass transitions decreased, suggesting an increased interaction between the blend components with compatibilizer. At 5 wt % of compatibilizer, the separation between the T_gs reduced in both 50/50 and 30/70 blends. The positron results for the blends without compatibilizer showed an increase in relative fractional free volume, as the EPDM content in the blend is increased. This suggests the coalescence of free volume of EPDM with the free volumes of PTT due to phase separation. However, the effect of compatibilizer in the blends was clearly seen with the observed minimum in free volume parameters at 5% of the compatibilizer, further suggesting that this percent of compatibilizer seems to be the optimum value for these blends. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 740–747, 2006     

The dynamic mechanical analysis,impact, and morphological studies of EPDM–PVC and MMA‐g‐EPDM–PVC blends

The dynamic mechanical studies, impact resistance, and scanning electron microscopic studies of ethylene propylene diene terpolymer–poly(vinyl chloride) (EPDM–PVC) and methyl methacrylate grafted EPDM rubber (MMA‐g‐EPDM)–PVC (graft contents of 4, 13, 21, and 32%) blends were undertaken. All the regions of viscoelasticity were present in the E′ curve, while the E″ curve showed two glass transition temperatures for EPDM–PVC and MMA‐g‐EPDM–PVC blends, and the T_g increased with increasing graft content, indicating the incompatibility of these blends. The tan δ curve showed three dispersion regions for all blends arising from the α, β, and Γ transitions of the molecules. The sharp α transition peak shifted to higher temperatures with increasing concentration of the graft copolymer in the blends. EPDM showed less improvement while a sixfold increase in impact strength was noticed with the grafted EPDM. The scanning electron microscopy micrographs of EPDM–PVC showed less interaction between the phases in comparison to MMA‐g‐EPDM–PVC blends. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 71: 1959–1968, 1999     

Study on Blends of Ethylene Propylene Diene Rubber and Thermoplastic Polyurethanes

Blends of ethylene propylene diene rubber (EPDM) and thermoplastic polyurethane (TPU) have been studied to understand the compatibility and morphology. The study was initially done with unmodified EPDM and subsequently with modified EPDM through maleation process. Mechanical properties of unmodified EPDM blends are improved with the addition of TPU. However, the appearance of two T _gs even at lower concentrations of PU in the blends indicates that the blends are incompatible. Blends of maleated EPDM with TPU showed a single T _g and further improvement in mechanical properties which is attributed to the improvement in compatibility as also confirmed by SEM analysis.     

Effects of trans-polyoctylene rubber (TOR) on the properties of NR/EPDM blends

trans-Polyoctylene rubber (TOR) was melt blended with an incompatible NR/EPDM (70/30) blend. Mixing torque and temperature were reduced as TOR was added to NR/EPDM blend. The curing characteristics of the blend were affected as TOR participated in vulcanization and became a part of network. A scanning electron micrograph demonstrated that addition of TOR improved the compatibility of the blend and thereby led to a finer phase morphology. The ozone resistance of the blends was determined in terms of a critical stress–strain parameter. The critical stored energy density for ozone cracking was significantly enhanced for the TOR containing rubber blend. It was believed that the improvement in ozone resistance arised from finely dispersed ozone-resistant EPDM particles in the blend. TOR caused an improvement in dynamic properties and an increase in tensile modulus, but a decrease in tensile stress and elongation at break of the rubber blend. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 73: 749–756, 1999     

Miscibility and shear creep resistance of acrylic pressure-sensitive adhesives: Acrylic copolymer and tackifier resin systems

The miscibility between an acrylic copolymer and a tackifier resin was investigated in terms of phase diagrams, glass transition temperatures (T_g's), and dynamic mechanical properties of blends. Shear creep resistance (holding power, t_b) of the blends was measured as a function of both temperature and stress (σ₀) in order to obtain the master curves. It was found that the shear creep resistance of the pressure-sensitive adhesives (PSAs) was closely related to the miscibility between the components and viscoelastic properties of the blends. The master curve of the miscible blends shifts toward a longer time scale as the amount of tackifier resin in the blend is increased as a result of the modification of the bulk properties, and their behavior greatly depends on the glass transition temperature (T_g) and storage modulus (G′) of the blends. However, the master curve of immiscible blends where two phases exist in the system does not shift greatly toward a longer time scale, because T_g and the storage modulus of the blend do not change greatly. © 1995 John Wiley & Sons, Inc.     

Boiling water aging of polycarbonate and polycarbonate/acrylonitrile–butadiene–styrene resin and polycarbonate/low‐density polyester blends

The effects of boiling water on the mechanical and thermal properties and morphologies of polycarbonate (PC), PC/acrylonitrile–butadiene–styrene resin (PC/ABS), and PC/low‐density polyester (PC/LDPE) blends (compositions of PC/ABS and PC/LDPE blends were 80/20) were studied. PC and the PC/ABS blend had a transition from ductile to brittle materials after boiling water aging. The PC/LDPE blend was more resistant to boiling water aging than PC and the PC/ABS blend. The thermal properties of glass‐transition temperature (T_g) and melting temperature (T_m) in PC and the blends were measured by DSC. The T_g of PC and PC in the PC/ABS and PC/LDPE blends decreased after aging. The T_g of the ABS component in the PC/ABS blend did not change after aging. The supersaturated water in PC clustered around impurities or air bubbles leading to the formation of microcracks, which was the primary reason for the ductile–brittle transition in PC, and the microcracks could not recover after PC was treated at 160°C for 6 h. The PC/ABS blend showed slightly higher resistance to boiling water than did PC. The highest resistance to boiling water of the PC/LDPE blend may be attributed to its special structural morphology. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 589–595, 2003     

Dynamic mechanical properties of polypropylene‐g‐maleic anhydride and ethylene–propylene–diene terpolymer blends: Effect of blend preparation methods

In this work, we attempted two different ways of processing to improve interfacial adhesion of polypropylene (PP) and ethylene–propylene–diene terpolymer (EPDM) by introducing maleic anhydride (MAH); In one way, the in situ grafting and dynamic vulcanization (ISGV) were performed simultaneously from PP and EPDM with MAH in the presence of dicumyl peroxide (DCP) in an intensive mixer. In another way, PP was first grafted with MAH and then the PP‐g‐MAH was blended with EPDM in the intensive mixer in the presence of DCP by the dynamic vulcanization (DV). It was found that the glass transition temperatures (T_gs) of both PP and EPDM phases were shifted to higher temperature as the EPDM content increased for the blends prepared by both IGSV and DV methods, mainly due to the crosslinking of EPDM. The higher T_gs and larger storage moduli were observed for the blends prepared by the ISGV method than those prepared by the DV method, while the morphology showed that the size reduction of dispersed particles in latter blends was larger than that of the former blends. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 77: 2777–2784, 2000     

Comparative behavior of in situ silica generation in saturated rubbers: EPDM and hydrogenated natural rubber

Role of carbon‐carbon double (C?C) bonds content and their position in ethylene‐propylene diene ter‐polymer (EPDM), hydrogenated natural rubber (HNR) and natural rubber (NR) on in situ silica formation using tetraethoxysilane (TEOS) as a silica precursor is comparatively investigated. Glass transition temperature (T_g ) reflecting rubber chain flexibility is found as an important factor for in situ silica generation via swelling method. Despite of similar solubility parameters, NR has higher TEOS‐swelling degree resulting in the higher in situ silica content (30.8 phr) than EPDM (3.50 phr) and HNR (10.4–17.6 phr) due to the higher T_g of EPDM and HNR providing the less chain flexibility to be swollen in TEOS solution. The morphological analysis implies that C?C bonds in saturated rubbers may be agglomeration sites for in situ silica particles. For practical applications, saturated rubbers containing in situ silica/NR vulcanizates showed the improvement of mechanical properties and resistance of thermal and ozone degradation. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134 , 44748.     

Effect of core‐shell morphology evolution on the rheology,crystallization, and mechanical properties of PA6/EPDM‐g‐MA/HDPE ternary blend

In this article, polyamide 6 (PA6), maleic anhydride grafted ethylene‐propylene‐diene monomer (EPDM‐g‐MA), high‐density polyethylene (HDPE) were simultaneously added into an internal mixer to melt‐mixing for different periods. The relationship between morphology and rheological behaviors, crystallization, mechanical properties of PA6/EPDM‐g‐MA/HDPE blends were studied. The phase morphology observation revealed that PA6/EPDM‐g‐MA/HDPE (70/15/15 wt %) blend is constituted from PA6 matrix in which is dispersed core‐shell droplets of HDPE core encapsulated by EPDM‐g‐MA phase and indicated that the mixing time played a crucial role on the evolution of the core‐shell morphology. Rheological measurement manifested that the complex viscosity and storage modulus of ternary blends were notable higher than the pure polymer blends and binary blends which ascribed different phase morphology. Moreover, the maximum notched impact strength of PA6/EPDM‐g‐MA/HDPE blend was 80.7 KJ/m² and this value was 10–11 times higher than that of pure PA6. Particularly, differential scanning calorimetry results indicated that the bulk crystallization temperature of HDPE (114.6°C) was partly weakened and a new crystallization peak appeared at a lower temperature of around 102.2°C as a result of co‐crystal of HDPE and EPDM‐g‐MA. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013