关于LISA数据库中关于云计算文献的定量分析

科学技术的发展现在一个国家的发展中显的极为的重要,对于科学技术的研究是体现一个国家的综合国力的表现,本文主要针对LISA数据库收录的有关云计算机的文献进行的研究,通过这些的研究分析来关注它的起源,发展历程极其研究的最新动态。并且在一定的范围内探讨出在以后的研究道路上的目标以及我们应该注意的问题。     

城市设计规划对城市发展的意义

城市发展的好与坏与城市的设计规划有着巨大的联系,这是不容置疑的,发展好的城市的规划设计就是要比其他城市的规划设计更加的合理。但是在这个城市遍地的时代,不是所以的城市都发展的很好,这主要就是城市的设计规划的不同所导致的,譬如:城市中的道路;建筑;楼房的建设;环境的创建等,这些东西的不同直接导致了两个城市的发展结果截然不同,这就说明城市规划对城市的发展是有很大的意义的。     

关于对局域网建设与维护的分析

网络的规划及计算机的维护工作主要涉及到了计算机的软硬件的管理及维护的工作还有网络的相应的规划和管理的工作,此外还有中心机房的规划和布置的相关的内容以及计算机的外部设备相应的维护及管理的工作等内容。本文就局域网的建设和维护工作做了很好地分析,并针对其中的问题提出了很好地建议。     

浅谈我国数字卫星电视的发展

我国的数字卫星电视经过了一个漫长的发展才达到了目前的程度,有效的提高了我国人民的能够收看到的电视品质,本文从我国早期的的卫星电视与我国卫星电视的数字化过程对我国的数字卫星电视的发展做出了一定的论述。     

宁波大学体育馆扩声系统设计

对于宁波大学的体育馆的扩声系统的设计进行了详细的介绍.考虑到体育馆内部的空间大,混响时间长的建筑结构的缺陷.在吊顶上采用了大量的吸声体解决了混响时间过长的问题.同时,采用集中式的阵列扬声器的布局模式解决了声压级的覆盖以及对语言清晰度要求的矛盾.同时在系统中采用了大量的数字音频处理器设备简化了系统的结构,提高了系统的可靠性.     

谈工程测量技术存在的问题及对策分析

随着人们建筑工程的质量的要求的不断的提高,建筑工程的质量的检测技术在也在不断的发展和受到人们越来越多的重视。在建筑施工的过程中的建筑工程的质量的控制和监督是影响工程的整体质量的一个关键的因素。在建筑的工程质量检测的过程中要对工程的工期和工程建设质量检测人员的素质等的因素进行严格的控制和管理,以保证工程的质量的合格。     

历史的真实还原:「孔子」幕后特效评析

2010年的国产鸿篇巨制<孔子>,以强大的演员阵容,扣人心弦的故事情节,具有和谐思想的人性解读,再现出中国二千五百年前的春秋争霸以及一位"去圣"的凡人颠沛流离的晚年生活.视听震撼之外,是灵魂深处的碰撞:天下大同的圣人思想、仙境岸边的子见老子、虔诚执着的门徒弟子,灰飞烟灭的红颜知己,颠沛流离的晚年生活、皓首苍颜的衰老终回……从人心的最深处不断敲打的人性的灵魂.     

虚拟现实技术在虚拟校园中的应用研究

随着时代的飞速发展,科技的不断进步,人们越来越意识到虚拟现实的重要作用,校园是培养人才的地方,如何给学生更好地学习环境,更好的保障学生在上学时的安全,更加有效地提高学生学习的效率,都是可以通过虚拟现实的技术得以实现的。人们通过虚拟现实的技术,更好的更直观了解校园中一些具体的情况,获取相应的信息,以往仅仅只是对校园环境的模拟已经无法满足人们的需求,人们需要教学,教务,校园生活三者相结合的一种虚拟校园的出现,而目前的科学技术已经足以实现这样的效果,真实性,互动性,有着特有的情节是虚拟技术的一个很重要的表现形式。     

保障多媒体业务QoS的跨层无线资源管理

传统的无线通信系统空中接口的高层协议采用简单的分层结构,每层进行独立的设计和操作,各层间的接口是静态的。这种设计方法简化了网络设计,具有很好的通用性,但是无线通信系统的信道是随着时间、空间和频率而随机变化的,同时用户的多媒体业务和整个网络状态也是动态的、变化的,而传统的分层协议结构不能很好的适应无线通信的特点,不能保证用户多媒体业务的QoS（服务质量）,传输的可靠性和提高无线资源的利用率,本文针对此问题阐述了跨层无线资源管理的思想,跨层设计能够根据用户多媒体业务的QoS和信道的随机变化特性等,跨过层间功能进行优化,更好的保证了不同多媒体业务的QoS,利用各个用户间信道的独立随机变化的特性,最大化系统的传输效率。     

数据信息于无线传输之下的采集和控制

传统的传输数据的方式是应用有线的方式。传统的数据信息的传输方式存在一定的弊端,在这些弊端的存在以及时代的发展之下,我们进入了无线的时代。数据信息于无线传输的采集与控制的方式具有速度快,噪音小、效率高等优点,给我们的生活带来了巨大的便利。     

Development of the readout system for waveguide multilayer optical card

Waveguide multilayer optical card （WMOC） is a novel storage device of three-dimensional optical information. An advanced readout system fitting for the WMOC is introduced in this paper. The hardware mainly consists of the light source for reading, WMOC, motorized stages addressing unit, microscope imaging unit, CCD detecting unit and PC controlling ＆ processing unit. The movement of the precision motorized stage is controlled by the computer through Visual Basic （VB） language in software. A control panel is also designed to get the layer address and the page address through which the position of the motorized stages can be changed. The WMOC readout system is easy to manage and the readout result is directly displayed on computer monitor.     

Nanoimprint Lithography -A Next Generation High Volume Lithography Technique

IntroductionNanoimprint Lithography is a well-acknowl-edged low cost, high resolution, large area pattern-ing process. It includes the most promising methods,high-pressure hot embossing lithography (HEL) [2],UV-cured imprinting (UV-NIL) [3] and micro contactprinting (m-CP, MCP) [4]. Curing of the imprintedstructures is either done by subsequent UV-lightexposure in the case of UV-NIL or by cooling downbelow the glass transition temperature of the ther-moplastic material in case of HEL…     

Collinear phase-matching study of terahertz-wave generation via difference frequency mixed in GaAs and Inp

The collinearly phase-matching condition of terahertz-wave generation via difference frequency mixed in GaAs and InP is theoretically studied. In collinear phase-matching, the optimum phase-matching wave hands of these two crystals are calculated. The optimum phase-matching wave bands in GaAs and lnP are 0.95-1.38μm and 0.7-0.96μm respectively. The influence of the wavelength choice of the pump wave on the coherent length in THz-wave tuning is also discussed. The influence of the temperature alteration on the phase-matching and the temperature tuning properties in GaAs crystal are calculated and analyzed. It can serve for the following experiments as a theoretical evidence and a reference as well.     

Effects of the alloy compositions on the phonon-polaritons in ternary mixed crystals

Composition dependence of bulk and surface phonon-polaritons in ternary mixed crystals are studied in the framework of the modified random-element-isodisplacement model and the Bom-Huang approximation. The numerical results for Several Ⅱ - Ⅵ and Ⅲ- Ⅴ compound systems are performed, and the polariton frequencies as functions of the compositions for ternary mixed crystals AlxGa1-xAs, GaPxAS1-x, ZnSxSe1-x, GaAsxSb1-x, GaxIn1-xP, and ZnxCd1-xS as examples are given and discussed. The results show that the dependence of the energies of two branches of bulk phonon-polaritons which have phonon-like characteristics, and surface phonon-polaritons on the compositions of ternary mixed crystals are nonlinear and different from those of the corresponding binary systems.     

Influence of PVK ： NPB hole transporting layer on the characteristics of organic light-emitting devices

A doping system consisting of NPB and PVK is employed as a composite hole transporting layer （CHTL）. By adjusting the component ratio of the doping system, a series of devices with different concentration proportion of PVK ： NPB are constracted. The result shows that doping concentration of NPB enhances the competence of hole transporting ability, and modifies the recombination region of charge as well as affects the surface morphology of doped film. Optimum device with a maximum brightness of 7852 cd/m^2 and a power efficiency of 1.75 lm/W has been obtained by choosing a concentration proportion of PVK ： NPB at 1：3.     

New insert layer structure OLEDs

An insert layer structure organic electroluminescent device（OLED） based on a new luminescent material （Zn（salen）） is fabricated. The configuration of the device is ITO/CuPc/NPD/Zn（salen）/Liq/LiF/A1/CuPc/NPD/Zn（salen）/Liq/LiF/A1. Effective insert electrode layers comprising LiF（1nm）/Al（5 nm） are used as a single semitransparent mirror, and bilayer cathode LiF（1 nm）/A1（100 nm） is used as a reflecting mirror. The two mirrors form a Fabry-Perot microcavity and two emissive units. The maximum brightness and luminous efficiency reach 674 cd/m^2 and 2.652 cd/A, respectively, which are 2.1 and 3.7 times higher than the conventional device, respectively. The superior brightness and luminous efficiency over conventional single-unit devices are attributed to microcavity effect.     

Analysis of error performance on Turbo coded FDPIM

Due to variable symbol length of digital pulse interval modulation（DPIM）, it is difficult to analyze the error performances of Turbo coded DPIM. To solve this problem, a fixed-length digital pulse interval modulation（FDPIM） method is provided. The FDPIM modulation structure is introduced. The packet error rates of uncoded FDPIM are analyzed and compared with that of DPIM. Bit error rates of Turbo coded FDPIM are simulated based on three kinds of analytical models under weak turbulence channel. The results show that packet error rate of uncoded FDPIM is inferior to that of uncoded DPIM. However, FDPIM is easy to be implemented and easy to be combined, with Turbo code for soft-decision because of its fixed length. Besides, the introduction of Turbo code in this modulation can decrease the average power about 10 dBm, which means that it can improve the error performance of the system effectively.     

A method for calculating the center position of collimated light

It is a key problem to accurately calculate beam spots＇ center of measuring the warp by using a collimated laser. A new method, named double geometrical center method （DGCM）, is put forward for the first time. In this method, a plane wave perpendicularly irradiates an aperture stop, and a charge couple device （CCD） is employed to receive the diffraction-beam spots, then the geometrical centers of the fast and the second diffraction-beam spots are calculated respectively, and their mean value is regarded as the center of datum beam. In face of such adverse instances as laser intension distributing defectively, part of the image being saturated, this method can still work well. What＇s more, this method can detect whether an unacceptable error exits in the courses of image receiving, processing and calculating. The experimental results indicate the precision of this method is high.     

Resolution Enhancement Technology:Integrated Process Solutions using OPC

DUV lithography, using the 248 nm wavelength, is a viable manufacturing option for devices with features at 130 nm and less. Given the low kl value of the lithography, integrated process development is a necessary method for achieving acceptable process latitude. The application of assist features for rule based OPC requires the simultaneous optimization of the mask, illumination optics and the resist.Described in this paper are the details involved in optimizing each of these aspects for line and space imaging.A reference pitch is first chosen to determine how the optics will be set. The ideal sigma setting is determined by a simple geometrically derived expression. The inner and outer machine settings are determined, in turn,with the simulation of a figure of merit. The maximum value of the response surface of this FOM occurs at the optimal sigma settings. Experimental confirmation of this is shown in the paper.Assist features are used to modify the aerial image of the more isolated images on the mask. The effect that the diffraction of the scattering bars (SBs) has on the image intensity distribution is explained. Rules for determining the size and placement of SBs are also given.Resist is optimized for use with off-axis illumination and assist features. A general explanation of the material' s effect is discussed along with the affect on the through-pitch bias. The paper culminates with the showing of the lithographic results from the fully optimized system.     

Preparation and Characterization of TaN ALD Precursors

High purity organic-tantalum precursors for thin film ALD TaN were synthesized and characterized.Vapor pressure and thermal stability of these precursors were studied.From the vapor pressure analysis,it was found that TBTEMT has a higher vapor pressure than any other published liquid TaN precursor,including TBTDET,TAITMATA,and IPTDET.Thermal stability of the alkyl groups on the precursors was investigated using a 1H NMR technique.The results indicated that the tertbutylimino group is the most stable group on TBTDET and TBTEMT as compared to the dialkylamido groups.Thermal stability of TaN precursors decreased in the following order:TBTDET ＞ PDMAT ＞ TBTEMT.In conclusion,precursor vapor pressure and thermal stability were tuned by making slight variations in the ligand sphere around the metal center.