共查询到18条相似文献,搜索用时 906 毫秒
1.
基于Web的远程监控系统允许企业或工厂通过Internet远程监控现场设备,但是作为一个开放的系统,其潜在的安全风险不可避免。本文先分析了基于Web的远程监控系统面临的安全威胁,然后提出了一种基于轻量级目录访问协议(LDAP)的分布式防火墙系统来改善基于Web的远程监控系统的安全性。 相似文献
2.
3.
4.
5.
阐述了基于Web和现场总线的远程监控系统的结构设计与实现.它集下位智能节点控制、上位基于B/S结构的网际组态软件WebAccess远程监控为一体,具有组态界面友好、运行实时可靠等优点.在讨论系统体系结构、技术方案、网络安全的基础上,设计并实现了基于Web的远程监控系统. 相似文献
6.
提出了一个基于ARM的乳化液泵站的远程监控系统设计方案,通过嵌入式系统Web服务器和Internet实现对乳化液泵站的远程监控。介绍了嵌入式远程监控系统的组成及结构,其中重点介绍了嵌入式Web服务器的组成与实现。 相似文献
7.
《仪表技术与传感器》2020,(5)
为了解决污水处理远程监控系统结构复杂、开发周期长的问题,文中提出了一种基于Web Service技术的设计开发方法。首先,对污水处理监控系统的功能和数据需求进行分析,设计了Web Service接口软件架构;其次,制订了Web Service接口和接口规范,为系统的功能扩展提供了标准;最后,对设计的Web Service接口进行发布,并将其应用于污水处理远程监控系统中。结果表明:基于Web Service技术的污水处理远程监控系统提高了软件开发效率,增强了软件的复用性,方便系统功能扩展。 相似文献
8.
提出了基于Web的远程温度监控系统的设计和实现方法。系统中监控计算机对现场温度实时监控,并通过Web服务器与Internet上的客户端建立连接,以较低的成本完成了现场温度的远程监控。 相似文献
9.
为解决传统监控模式受时间和地点限制的问题,提出了基于Web与嵌入式系统的远程监控模型及其解决方案。以步进电机为远程监控对象,利用UART总线技术与Web技术进行远程通信,通过片上系统(SoC)微处理器控制硬件接口,采用嵌入式系统主控片上系统的运行,将Web技术与嵌人式技术相结合,研制完成了一个完整的远程监控系统。实验结果表明,该系统可对无人值守的现场设备实现随时随地的远程监控。 相似文献
10.
11.
Web-based remote monitoring and fault diagnosis system 总被引:2,自引:0,他引:2
Xing Wu Jin Chen Ruqiang Li Fucai Li 《The International Journal of Advanced Manufacturing Technology》2006,28(1-2):162-175
This paper proposes an approved Web-based multilayer distributed software architecture solution for remote monitoring and
fault diagnosis. To tightly integrate legacy monitor systems, a component framework model based on COM has been proposed,
which is very suitable for remote monitoring and fault diagnosis applications. This system has the potential for exchanging
a data acquisition system by using wrapper service components. A mixed thick Web client architecture is proposed to implement
real-time remote monitoring. A Web-based remote monitoring and fault diagnosis system is developed by using modeling technology,
Web application technology, component technology and VME extension for instrumentation (VXI) bus technology, which publishes
a fault diagnosis algorithm package, a basic monitoring package and an advanced analysis package on the Internet. This system
provides authorized users with an effective and instant way to access new monitoring and diagnosis component packages in time.
This paper gives researchers a paradigm to accomplish similar systems. The technique developed may be used for other fields,
such as power engineering, manufacture and transportation system. 相似文献
12.
Richard Chiou Prathaban Mookiah Yongjin Kwon 《The International Journal of Advanced Manufacturing Technology》2009,43(7-8):720-730
This paper investigates the development of a Web-based quality control system with the use of Internet-based computer machine vision. Such a system allows designers located far from the production facility to monitor, control, and program the quality inspection process as the product design evolves. Quality control tasks are performed and monitored remotely through the Web where Internet-based machine vision sensors inspect part dimensions and tolerance while Internet-enabled robots perform the necessary robotic operations. The remote quality monitoring system—which lets the user monitor the part status including data, image, and video through the Internet—is built using Java. The use of Java allows for interconnection and data transfer between the different components of the Web-based quality system and the robots. The ability to access and control quality control devices via the Web benefits the current manufacturing environment in the following ways: ubiquitous access to the production floor, remote control/programming/monitoring capability, and integration of production equipment into information networks for improving efficiency and product quality. 相似文献
13.
The complex environment of a coal mine requires the underground environment, devices and miners to be constantly monitored to ensure safe coal production. However, existing coal mines do not meet these coverage requirements because blind spots occur when using a wired network. In this paper, we develop a Web-based, lightweight remote monitoring and control platform using a wireless sensor network (WSN) with the REST style to collect temperature, humidity and methane concentration data in a coal mine using sensor nodes. This platform also collects information on personnel positions inside the mine. We implement a RESTful application programming interface (API) that provides access to underground sensors and instruments through the Web such that underground coal mine physical devices can be easily interfaced to remote monitoring and control applications. We also implement three different scenarios for Web-based, lightweight remote monitoring and control of coal mine safety and measure and analyze the system performance. Finally, we present the conclusions from this study and discuss future work. 相似文献
14.
15.
J.F. Wang Peter W. Tse L.S. He Ricky W. Yeung 《The International Journal of Advanced Manufacturing Technology》2004,24(9-10):764-772
Optimised maintenance can reduce operating costs by demanding less resources and avoiding equipment breakdown, hence ensuring that daily manufacturing and production will not be interrupted. Web-based maintenance is one of the most efficient methods for optimising maintenance. The Web-based maintenance system that we have developed uses virtual instruments, to provide remote sensing, monitoring, and on-line fault diagnosis for equipment, together with a collaborative maintenance platform for international experts to interactively share their experiences in maintenance. Moreover, Web-based maintenance is suitable for multi-tasking and multi-user types of industrial work environments. In this paper, we summarise the methods used for Web-based remote sensing and monitoring, the design and implementation of Web-enabled virtual instruments, the architecture of the collaborative maintenance platform, and the design for the mini-servers. Each mini-server is equipped with a conventional mini-Web-server and a data acquisition (DAQ) server. With the help of Web-based maintenance, local companies can be transformed into global companies providing services to their customers anywhere and at anytime. 相似文献
16.
17.
G. Tsoukantas K. Salonitis A. Stournaras P. Stavropoulos G. Chryssolouris 《The International Journal of Advanced Manufacturing Technology》2007,32(9-10):932-941
Remote welding opens new possibilities for the highly productive and qualitative joining of metal structures, especially in the automotive industry. This work first summarises the different types of remote welding systems (RWSs) based primarily on the different features of the laser beam scanning systems that RWSs implement. A generalised two-mirror scanning system is geometrically analyzed in order to evaluate the irradiated laser intensity on the workpiece as it changes due to the inclinations with which the laser beam impinges to the processing plane. The study discusses the limitations that a two-mirror scanning system enforces in remote welding, and sets the foundation for further theoretical and experimental investigation of this process. 相似文献
18.
基于嵌入式web传感器的新型瓦斯监测防爆系统 总被引:1,自引:0,他引:1
结合煤矿井下安全监测系统的改进和管理需要,分析了井下监测系统的特点,提出了基于嵌入式Web传感器的新型瓦斯监测防爆系统的设计思路、方法以及具体的硬件实现,并对基于μC/OS-Ⅱ操作系统技术的嵌入式Web开发研究和分析设计做了详细说明。该方法采用ARM7TDMI微处理器内核芯片构建嵌入式Web智能传感器,利用传感器从现场环境获取了相关参数,并通过内嵌的以太网网络接口直接将数据发往监控浏览器或数据接收服务器,保证了瓦斯参数的实时监测并利用软件对参数进行实时分析,可以对事件进行较好的预测功能,除此之外还可将系统连入互联网中,实现矿井环境参数的远程访问。 相似文献