Dielectric and dye adsorption properties of luminescent-superparamagnetic MFe2O4 (M = Mn,Mg)/reduced graphene oxide composites

MFe₂O₄ (M = Mn, Mg)/reduced graphene oxide (MFe₂O₄/RGO) nanocomposites were synthesized through a simple and novel pressure cooker assisted solvothermal method. The nanocomposites were characterized using x-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), UV–Vis absorption and photoluminescence spectroscopy, transmission electron microscopy (TEM) and x-ray photoelectron spectroscopy (XPS). The optical analyses showed that, the MFe₂O₄/RGO materials have good photoluminescence (PL) with excitation dependent PL properties while magnetic characterization indicated that, the as-synthesized MFe₂O₄/RGO nanocomposites exhibits superparamagnetic behavior. Dielectric spectroscopy analysis showed enhanced dielectric constant, dielectric loss and AC conductivity for MFe₂O₄/RGO, compared to graphite oxide (GO). The study on methyl blue (MB) dye adsorption revealed that, the as-prepared nanocomposites have strong and recyclable adsorption for MB.     

Envisioning the composition effect on structural,magnetic, thermal and optical properties of mesoporous MgFe2O4-GO nanocomposites

The effect of variation in composition on the structural, magnetic, optical and photo catalytic activity of magnesium ferrite (MgFe₂O₄) -graphene oxide (GO) nanocomposites was studied. Magnetic nanocomposites of GO and MgFe₂O₄ nanoparticles (NPs) with varying w/w ratio were synthesized by facile sonication method. X-Ray diffraction patterns confirmed the presence of spinel ferrite phase in the nanocomposites with the crystalline size 8–32 nm. Fourier transformation infrared (FT-IR) spectra of the nanocomposites displayed absorption bands corresponding to GO and MgFe₂O₄ NPs along with red shift of bands corresponding to C=O, C=C and O-H stretching. Thermo gravimetric analysis confirmed higher stability of nanocomposites over pristine GO. Saturation magnetization increased from 3.63 to 11.10 emu/g with the increase in content of MgFe₂O₄ NPs in the nanocomposites. Scanning electron microscopy analysis along with energy dispersive spectroscopy (SEM-EDX) confirmed the presence of MgFe₂O₄ NPs along with GO sheets. Immobilization of clusters of MgFe₂O₄ NPs onto GO sheets was evident from transmission electron micrographs (TEM) of all the nanocomposites. BET surface area of the nanocomposites ranged from 63.04 to 165.29 m²/g and was maximum when GO:MgFe₂O₄ w/w ratio was 1:0.5. It was markedly higher than pristine GO and MgFe₂O₄ NPs. Optical studies revealed lowering of the band gap in the nanocomposites upto 2.21 eV as compared to pristine MgFe₂O₄ NPs. Photoluminescence (PL) spectra of nanocomposites displayed quenching of PL intensity with increase of GO content. Band gap also displayed similar trend. The synthesized nanocomposites were used as photocatalysts for methylene blue dye degradation under visible light irradiation. The nanocomposite with GO to MgFe₂O₄ ratio 1:0.5 displayed best activity with complete degradation of dye in 30 min. The results confirmed that the composition of GO based magnetic nanocomposites can be tailored for efficient removal of contaminants.     

Structural,morphological and optomagnetic properties of GO/Nd/Cu-Mn ferrite ternary nanocomposite

Graphene oxide (GO)/neodymium (Nd)/Cu_0·5Mn_0·5Fe₂O₄ ternary nanocomposite was prepared by sonochemical method and modified Hummer's method. The crystal structure and structural parameter of Cu_0·5Mn_0·5Fe₂O₄ (CMF) nanoferrites were changed with the addition of Nd³⁺ and GO. Raman active modes of the GO and ferrite system were observed from Raman spectra. The surface oxidation state (C 1s, O 1s, Cu 2p, Mn 2p, Fe 2p, and Nd 3 d) and their respective binding energies of the prepared nanocomposite were discussed. Different surface morphologies were acquired for CMF, Cu_0·5Mn_0·5Fe_1.85Nd_0.15O₄ (CMNF), GO, and GO/Cu_0·5Mn_0·5Fe_1.85Nd_0.15O₄ (GCMNF) ferrite nanocomposites. The absorption of the Cu-Mn nanoferrite (red region) shifted into the blue region with the addition of Nd³⁺ and GO. The magnetic parameters were changed with doping of Nd into CMF and GO in CMNF nanoferrite. It was found that the high anisotropy energy values of the CMNF and GCMNF ferrite nanocomposites could be used for electromagnetic wave-absorbing application.     

Facile synthesis of Co0.5Zn0.5Fe2O4 nanoparticles decorated reduced graphene oxide hybrid nanocomposites with enhanced electromagnetic wave absorption properties

Herein, reduced graphene oxide/cobalt-zinc ferrite (RGO/Co_0.5Zn_0.5Fe₂O₄) hybrid nanocomposites were fabricated by a facile hydrothermal strategy. Results revealed that the contents of RGO could affect the micromorphology, electromagnetic parameters and electromagnetic wave absorption properties. As the contents of RGO increased in the as-synthesized hybrid nanocomposites, the dispersibility of the particles was improved. Meanwhile, numerously ferromagnetic Co_0.5Zn_0.5Fe₂O₄ particles were evenly anchored on the wrinkled surfaces of flaky RGO. Besides, the obtained hybrid nanocomposites exhibited superior electromagnetic absorption in both X and Ku bands, which was achieved by adjusting the RGO contents and matching thicknesses. Significantly, when the content of RGO was 7.4 wt%, the binary nanocomposites showed the optimal reflection loss of -73.9 dB at a thickness of 2.2 mm and broadest effective absorption bandwidth of 6.0 GHz (12.0–18.0 GHz) at a thin thickness of merely 2.0 mm. The enhanced electromagnetic absorption performance was primarily attributed to the multiple polarization effects, improved conduction loss caused by electron migration, and magnetic loss derived from ferromagnetic Co_0.5Zn_0.5Fe₂O₄ nanoparticles. Our results could provide inspiration for manufacturing graphene-based hybrid nanocomposites as high-efficient electromagnetic wave absorbers.     

One-pot solvothermal preparation of magnetic reduced graphene oxide-ferrite hybrids for organic dye removal

A one-pot solvothermal synthesis method was developed to prepare reduced graphene oxide (RGO) supported ferrite (MFe₂O₄, M = Mn, Zn, Co and Ni) hybrids using graphite oxide and metal ions (Fe³⁺ and M²⁺) as starting materials. The hybrids were characterized by X-ray powder diffraction, Raman spectra, field emission scanning electron microscopy, energy dispersive X-ray spectroscopy, transmission electron microscopy, and vibrating sample magnetometer. It was shown that monodispersed MFe₂O₄ microspheres with uniform size were homogeneously deposited on RGO nanosheets. The influence of the metal ion concentration on the morphology of the hybrids was investigated. The hybrids possess considerable saturation magnetization, lower remanence and coercivity. Importantly, the obtained hybrids are effective adsorbents for removal of dye pollutants. It was found that over 92% rhodamine B (RhB) and 100% methylene blue (MB) with a concentration of 5 mg/L can be removed by the hybrids within 2 min when the concentration of the hybrids is 0.6 g/L. In addition, the hybrids also show enhanced photocatalytic activity in the degradation of RhB and MB. Benefiting from their bigger saturation magnetization, the hybrids can be easily separated from the solution by a magnet. This research would provide a new easy separating platform for wastewater decontamination.     

In situ green synthesis of Ag nanoparticles on graphene oxide/TiO2 nanocomposite and their catalytic activity for the reduction of 4-nitrophenol,congo red and methylene blue

The Ag/RGO/TiO₂ nanocomposite was synthesized through an environmentally benign, simple, cost efficient, surfactant-free and green method using Euphorbia helioscopia L. leaf extract as a stabilizing and reducing agent. The E. helioscopia L. leaf extract was used for the reduction of Ag⁺ ions and GO to Ag NPs and RGO, respectively. The GO/TiO₂ and Ag/RGO/TiO₂ nanocomposites were characterized by FT-IR, UV–vis, TEM, XRD, SEM, EDS and ICP techniques. The Ag/RGO/TiO₂ nanocomposite was highly active for the reduction of 4-nitrophenol (4-NP), congo red (CR) and methylene blue (MB) in aqueous media at an ambient temperature. The Ag/RGO/TiO₂ nanocomposite was easily separated and recovered from the reaction mixture by centrifugation and reused for several cycles without any significant loss of catalytic activity.     

α-Arylation of oxindoles using recyclable metal oxide ferrite nanoparticles: Comparison between the catalytic activities of nickel,cobalt and copper ferrite nanoparticles

Three different spinel metal oxide catalytic systems including NiFe₂O₄, CuFe₂O₄ and CoFe₂O₄ were synthesized using co-precipitation technique and their catalytic activities were compared to each other in α-arylation of oxindole derivatives under the optimized reaction conditions. Both nickel ferrite and copper ferrite magnetic nanoparticles show approximately the same behavior in these reactions but cobalt ferrite ones indicate slightly different properties and were not as good as the other two catalysts. These superparamagnetic catalysts allowed that α-arylation of different types of oxindoles will occur in high yields under mild conditions and at very short times.     

Highly efficient synthesis of graphene/MnO2 hybrids and their application for ultrafast oxidative decomposition of methylene blue

A highly efficient method has been reported to fabricate the reduced graphene oxide/MnO₂ (RGO/MnO₂) hybrid materials, a kind of catalysts for oxidative decomposition of methylene blue (MB). The pristine suspension of graphene oxide/manganese sulfate (GO/MnSO₄) produced by the modified Hummers method is in situ transformed into GO/MnO₂ composites in combination with KMnO₄, and then further into RGO/MnO₂ composites by means of glucose-reduction. It is found that MnO₂ nanoparticles with the size of 20–30 nm are uniformly distributed in the structure of RGO. A series of composites with different mass ratios of RGO to MnO₂ has been proved superior catalytic activities, much higher than that of the bare MnO₂ for decomposition of MB dye in the presence of H₂O₂. Typically, 50 mL of MB (50 mg L⁻¹) can be completely decolorized and nearly 66% mineralized at 50 °C in 5 min with 10 mg of the RGO/MnO₂ hybrid. According to the adsorption–oxidation–desorption mechanism, the high activity of RGO/MnO₂ composites for decomposition of MB is closely related to the positive synergistic effect of RGO and MnO₂ with the assistance of H₂O₂.     

Ag/αFe2O3-rGO novel ternary nanocomposites: Synthesis,characterization, and photocatalytic activity

In this research, novel ternary Ag/αFe₂O₃-rGO nanocomposites with various contents of GO were synthesized via a facile one-pot hydrothermal method. Ag/αFe₂O₃-rGO nanocomposites were characterized by X-ray diffraction (XRD), Raman spectroscopy, field emission scanning electron microscopy (FESEM), energy-dispersive X-ray spectrometer (EDX), photoluminescence (PL) spectroscopy, and Fourier transform infrared (FTIR). The results showed that hematite nanoparticles and Ag nanoparticles were well decorated on the graphene surface. Photocatalytic activity of Ag/αFe₂O₃-rGO ternary nanocomposites and pure Ag/αFe₂O₃ was investigated for photodegradation of Congo red dye solution as a model pollutant under UV light irradiation. The ternary nanocomposite with 1.8?mg/ml GO aqueous solution concentration shows higher degradation efficiency under UV light irradiation than the pure Ag/αFe₂O₃ and the nanocomposites with other GO aqueous solution concentrations. It was observed that the adsorption of the dyes on the nanocomposites surface is dependent on the graphene content due to a decrease in the recombination rate, particles size, and increase charge carrier transfer. The results show that the Ag/αFe₂O₃-rGO nanocomposite can be used as an excellent photocatalytic material for degradation of Congo red dye in wastewater. A possible photocatalytic mechanism was proposed for degradation of Congo red dye.     

Facile solid-state synthesis of Ag/graphene oxide nanocomposites as highly active and stable catalyst for the reduction of 4-nitrophenol

A facile solid-state synthetic route was used to fabricate graphene oxide (GO) decorated with Ag nanoparticles. Ag/GO nanocomposites were prepared by reducing silver acetate with ascorbic acid in the presence of GO at ambient conditions. The characterization results showed that Ag nanoparticles with an average diameter of ~ 50 nm were well dispersed on the surface of GO nanosheets. Moreover, an application of the obtained Ag/GO nanocomposites as a catalyst in the reduction of 4-nitrophenol (4-NP) to 4-aminophenol by NaBH₄ was demonstrated. The Ag/GO nanocomposites exhibited high activity and stability for the catalytic reduction of 4-NP.     

Synthesis of CoNi/SiO2 core-shell nanoparticles decorated reduced graphene oxide nanosheets for enhanced electromagnetic wave absorption properties

In this research, the nanocomposites, CoNi/SiO₂ core-shell nanoparticles decorated reduced graphene oxide (RGO) nanosheets, are successfully synthesized via liquid-phase reduction reactions combined with a sol-gel route. The structures, morphologies, chemical composition and magnetic properties of CoNi nanoparticles, CoNi/SiO₂ core-shell nanoparticles and RGO/CoNi/SiO₂ nanocomposites have been investigated in exhaustive detail. The electromagnetic (EM) parameters of RGO/CoNi/SiO₂ nanocomposites are measured using a vector network analyzer. The results reveal that the RGO/CoNi/SiO₂ nanocomposites display enhanced EM wave absorption properties with the maximum reflection loss (R_L) of ??46.3?dB at 6.2?GHz with a matching thickness of 4.2?mm. Additionally, the absorption bandwidth corresponding to the R_L less than ??10?dB is up to 14.3?GHz (3.7–18.0?GHz) with a matching thickness range of 2.0–5.0?mm. To comprehensively consider the absorption bandwidth and the maximum R_L, the integrational method which defines ΔS as the integration area of R_L (R_L < ??10?dB) and R_E as EM wave absorption efficiency is adopted to reveal that the RGO/CoNi/SiO₂ nanocomposites exhibit the excellent absorption properties with the matching thickness of only 2.0?mm. Accordingly, the as-prepared RGO/CoNi/SiO₂ nanocomposites could be applied as promising EM wave absorption materials.     

Excellent electrocatalytic performance of Pt nanoparticles on reduced graphene oxide nanosheets prepared by a direct redox reaction between Na2PtCl4 and graphene oxide

A simple and environment-friendly method was used to prepare Pt/reduced graphene oxide (Pt/RGO) hybrids. This approach used a redox reaction between Na₂PtCl₄ and graphene oxide (GO) nanosheets and a subsequent thermal reduction of the material at 200 °C for 24 h in a vacuum oven. In contrast to other methods that use an additional reductant to prepare Pt nanoparticles, the Pt²⁺ was directly reduced to Pt⁰ in the GO solution. GO was used as the reducing agent, the stabilizing agent and the carrier. The resulting Pt/RGO hybrid was characterized by X-ray diffraction, thermo-gravimetric analysis, X-ray photoelectron spectroscopy, transmission electron microscopy and energy-dispersive X-ray spectroscopy. Electrochemical measurements showed that the Pt/RGO hybrids exhibit good activity as catalysts for the electro-oxidation of methanol and ethanol in acid media. Interestingly, the Pt/RGO hybrids showed better electrocatalytic activity and stability for the oxidation of methanol than Pt/C and Pt/RGO hybrids made from other Pt precursors. This indicates that the Pt/RGO hybrids should have great potential applications in direct methanol and ethanol fuel cells.     

Preparation of magnetite and silver poly(2‐acrylamido‐2‐methyl propane sulfonic acid‐co‐acrylamide) nanocomposites for adsorption and catalytic degradation of methylene blue water pollutant

The aim of the present work was to prepare microgel nanocomposites based on silver and magnetite to apply as adsorbents and heterogeneous catalysts for removal of methylene blue (MB) cationic dye from aqueous solution. For this, 2‐acrylamido‐2‐methylpropane sulfonic acid (AMPS) and acrylamide (AAm) monomers were used to prepare AMPS/AAm microgel based on the emulsion technique. Ag and Fe₃O₄ nanoparticles were embedded into the AMPS/AAm microgel using the in situ technique. Their particle sizes, surface charges, crystalline lattice structure, morphology, magnetic properties and thermal stability were investigated. The AMPS/AAm hydrogel nanocomposites were used as an adsorbent to remove MB dye. The AMPS/AAm microgel nanocomposites were tested as catalysts to reduce MB and degrade its chemical structure with heterogeneous Fenton oxidation using Ag and Fe₃O₄ nanocomposites, respectively. This study presents promising data as the prepared materials used as adsorbents and catalysts show competitive features compared with the data presented in the literature. © 2019 Society of Chemical Industry     

NO2 gas sensing responses of In2O3 nanoparticles decorated on GO nanosheets

Nanomaterials offer a wide range of applications in environmental nanotechnology. Hazardous pollutants in the environment are needed to be detected and controlled effectively to avoid human health risks. In this paper, we described the fine-controlled growth of In₂O₃ nanoparticles embedded on GO nanosheets by a facile precipitation method. The In₂O₃@GO nanocomposites exhibited outstanding gas sensing performance as compared with pure In₂O₃ nanoparticles towards NO₂. At 225 °C, the sensor displayed high selectivity, best response (78) to 40 ppm NO₂, quick response, and recovery times of 106s/42s. The improved sensing performances of the nanocomposite were attributed to large surface area, high gas adsorption-desorption capability, and the formation of p-n heterojunctions between In₂O₃ nanoparticles and GO nanosheets. The excellent gas detecting activities validate In₂O₃@GO nanocomposites as a promising candidate in the NO₂ gas sensor industry.     

Sub-20 nm anatase particles uniformly anchored on graphene oxide and reduced graphene oxide nanosheets and their photocatalytic oxidation and Li-ion storage capabilities

Nanosized anatase TiO₂ particles anchored on nanocarbon substrates have great potential for practical applications in high-performance lithium ion batteries and efficient photocatalysts. The synthesis of this material usually utilizes calcination to crystallize amorphous titania, which normally causes the formation of aggregates and some side effects. In this work, we demonstrated that sub-20 nm anatase particles uniformly anchored on graphene oxide and reduced graphene oxide nanosheets in aqueous solution at a temperature of 90 °C and atmospheric pressure, without further calcination. The photocatalytic oxidation activity and electrochemical properties of graphene oxide/anatase TiO₂ (GO/A) and reduced graphene oxide/anatase TiO₂ (RGO/A) were comparatively investigated. We found that GO/A showed higher photocatalytic oxidation activity than RGO/A under UV light irradiation. Graphene oxide accepted electrons and suffered reduction, which finally decreased GO/A’s photocatalytic oxidation activity to an extent similar to RGO/A. We also found that, as anode material for Li-ion battery, the specific capacity of RGO/A was nearly three times that of GO/A at the same current rate. This study will inspire better design of metal oxide/nanocarbon nanocomposites for high performance lithium ion battery and photocatalysis applications.     

Ultrasound assisted synthesis of heterostructured TiO2/ZnFe2O4 and TiO2/ZnFe1.98La0.02O4 systems as tunable photocatalysts for efficient organic pollutants removal

As a response to the everyday growing concern about wastewater treatment, some new mesoporous TiO₂/ZnFe₂O₄ and TiO₂/ZnFe_1.98La_0.02O₄ catalysts were synthesized during this research. The ultrasound template-assisted sol-gel method was employed in the synthesis, using conventional calcination and microwave treatment for pore directing agent removal. The as-prepared samples were characterized from the structural, optical, morphological and textural points of view, confirming the presence of spinel ferrites and TiO₂ anatase crystals in the nanocomposites. The synthetized powders exhibit promising characteristics for their use in adsorption and light activated degradation of organic pollutants. The photodegradation experiments of model pollutant basic blue 9 (methylene blue) dye were performed at laboratory scale and the optimum experimental parameters were determined as 0.4 g/L catalyst and 30 mg/L initial dye concentration, under UV light irradiation, visible irradiation and natural sun light irradiation. The conventionally calcined lanthanum doped TiO₂/ZnFe_1.98La_0.02O₄ system exhibited the highest efficiencies of 97%, 70% and 91% for dye removal from the solution, under UV light, visible light and natural sun light irradiation, respectively. Moreover, the catalytic activity was similar for up to four consecutive cycles. A lower yield of organic pollutant removal was observed in wastewater treatment plant (WWTP) effluent. The obtained results show that the newly synthesized catalysts are good candidates for the removal of water pollutants through adsorption and photocatalysis.     

Ultrasonic assisted synthesis of TiO2–reduced graphene oxide nanocomposites with superior photovoltaic and photocatalytic activities

In this work, TiO₂–reduced graphene oxide (RGO) nanocomposites were successfully produced by an ultrasonication-assisted reduction process. The reduction of graphene oxide (GO) and the formation TiO₂ crystals occurred simultaneously. The synthesized nanocomposite was characterized by SEM, EDX, Raman spectroscopy, FTIR, XRD, XPS, UV–vis spectroscopy, photoluminescence spectrometer and electrochemical impedance spectroscopy. As a result of the introduction of RGO, the light absorption of octahedral TiO₂ was markedly improved. The photocatalytic results revealed that weight percent of RGO has substantial influence on degradation of Rhodamine B under visible light irradiation. The enhancement of the photocatalytic activity can be attributed to the enhancement of the visible-light irradiation harvesting and efficiently separation of the photogenerated charge carriers. Meanwhile, upon the RGO loading, the photoelectric conversion efficiency of TiO₂–RGO nanocomposite modified electrode was also highly improved.     

Photocatalytic activity of copper ferrite graphene oxide particles for an efficient catalytic degradation of Reactive Black 5 in water

The photocatalytic performance of copper ferrite graphene oxide catalyst, CFXGO (CF: Copper ferrite, CuFe₂O₄; GO: Graphene oxide; X: GO weight percentage) was tested for photo Fenton-like oxidation of Reactive Black 5 by using UV light irradiation. The effect of the graphene oxide content in the catalyst structure on dye removal efficiency was tested by comparing the performances of the catalysts with different weight ratios of graphene oxide varying between 5 and 90%. The catalysts were characterized by Scanning Electron Microscopy, X-Ray Diffraction, Brunauer–Emmett–Teller method, and, Vibrating Sample Magnetometer. The influences of catalyst loading, initial pH, and, the H₂O₂ concentration were investigated in the presence of CF90GO catalyst, which has 90% graphene oxide content. According to the parametric studies, 98.2% decolorization and 82.8% TOC removal efficiencies were achieved in 2 h for the treatment of 50 mg/L RB5 solutions when the catalyst loading, the initial pH, and, the initial hydrogen peroxide concentration were 0.275 g/L, 7, and, 5.5 mM, respectively.     

Dielectric,thermal and mechanical properties of hybrid PMMA/RGO/Fe2O3 nanocomposites fabricated by in-situ polymerization

Currently, the organic-inorganic hybrid materials have gained tremendous importance due to their unique applications in different technological fields. In this connection, the chemical synthesis of poly(methyl methacrylate) (PMMA) and its binary and ternary nanocomposites by in-situ bulk polymerization with various percentages of reduced graphene oxide (RGO) and hematite nanoparticles (Fe₂O₃ NPs) is presented. Dielectric properties of binary and ternary nanocomposites are investigated in the frequency range of 25 Hz-1 MHz for each composition. Ternary nanocomposite of PMMA with RGO:Fe₂O₃ NPs (2:2 wt%) exhibits a substantial enhancement of the dielectric constant up to ≈308 and suppressed dielectric loss of 0.12 at 25 Hz. Appearance of three types of interfaces in ternary PMMA nanocomposites accounts for the superior dielectric properties due to the accumulation of greater number of charges at the interfaces as compared to the binary nanocomposites with only one interface. The same optimized ternary PMMA nanocomposite shows a remarkable improvement in the thermal conductivity (2.04 W/mK), which is attributed to the formation of efficient thermal conducting pathways contributed by the synergic reduction in thermal resistance of both RGO and Fe₂O₃ NPs (2:2 wt%) relative to the binary nanocomposites PMMA/2 wt% RGO (1.04 W/mK) and PMMA/2 wt% Fe₂O₃ (0.98 W/mK). Thus, ternary nanocomposites prove to be the excellent candidates for thermal management applications. Furthermore, a comparison of the mechanical strength and thermal stability for all the binary and ternary nanocomposites is presented. In the last section, respective precursors and optimized binary and ternary nanocomposites are characterized by XRD, FTIR and SEM which reveal the strong interaction of respective nanofillers into PMMA matrix.     

Insights into the optical,magnetic and dielectric properties of some novel polysulfone/NiFe2O4 composite materials

Novel polysulfone (PSU)/NiFe₂O₄ nanocomposites with good magneto‐dielectric properties were prepared in a simple and cost‐effective manner. Nickel ferrite nanoparticles exhibit a cubic spinel phase without any impurity phases according to X‐ray diffraction characterization. Transmission electron microscopy images of the nanoparticles showed a tetragonal particle shape with average particle size of 17–30 nm. The thermal stability of PSU proved to remain unaffected by nanoparticle concentration in the composite material. The emission spectra of the PSU/NiFe₂O₄ nanocomposites present a broad emission band located at 370 nm due to free exciton recombination. The composites exhibit hysteresis loops of a ferrimagnetic nature and good dielectric properties. Coercivity value measured at room temperature is 20.64 and 24.98 Oe and the squareness (M_r/M_s) is 0.290 and 0.225 for both polymer composite samples (4 and 24 vol% Ni ferrite). The formalism of the dielectric loss has been used to estimate the dipolar relaxations expressed by γ‐ and β‐relaxation processes. The presence of Ni ferrite nanoparticles in the PSU matrix increases the activation energy of secondary relaxations, which means a reduction of the molecular mobility in the nanocomposites as compared to PSU. © 2018 Society of Chemical Industry