Topics of research and development on concrete cask storage of spent nuclear fuel

This paper addresses topics of research and development (R&D) being challenged for realization of concrete cask storage of spent nuclear fuel in Japan. Comparison between metal cask storage and concrete cask storage is addressed. Background of these R&D and current status of technology on spent fuel storage are described. Need and design concepts of concrete cask storage technology, tests and evaluation of integrity of spent fuel, materials, concrete casks under normal and accident conditions, monitoring technology, etc. are systematically arranged and introduced. Topical problems of these R&D are described.     

Analysis of the Castor RBMK Cask Cooling Preceding Discharge of Spent Nuclear Fuel

Abstract

An important problem of the handling of casks intended for spent nuclear fuel transport and storage is providing safety during all operations. In particular the safety requirements should be fulfilled during the cask cooling that precedes the discharge of spent nuclear fuel from the cask. An analysis has been performed for the CASTOR RBMK cask heat removal system. This provides forced cooling of the cask with the spent fuel assemblies in it, by water delivery into the cask inner cavity. As a result of analyses performed for the different flow rates of the cooling water, the maximum pressure in the cask cavity caused by water evaporation has been estimated and compared with the maximum permissible value and the time taken by the cask in cooling to the given temperature limit has been determined. On the basis of the analysis results the most preferable regime for CASTOR RBMK cask cooling is suggested.     

Heat removal verification tests of full-scale concrete casks under accident conditions

Heat removal verification tests using two kinds of full-scale concrete casks under accident conditions were performed. One is reinforced concrete cask and the other is concrete filled steel cask. From the test results, their safety on heat removal performance under accident conditions was confirmed. Accident conditions for the tests were partial (50%) and complete (100%) blockage of the air inlets. Because the shape of air flow area in the concrete casks are different between two types of the cask, it was found that the change of the temperature distribution and air flow pattern were different for each accident condition.     

Radiological aspects and behavior of spent fuel considering long-term storage

For spent nuclear fuel management in Germany, the concept of dry interim storage in dual purpose casks before direct disposal is applied. Current operation licenses for storage facilities have been granted for a storage time of 40 years. Due to the current delay in site selection, an extension of the storage time seems inevitable. In consideration of this issue, GRS performed burnup calculations, thermal and mechanical analyses as well as particle transport and shielding calculations for UO₂ and MOX fuels stored in a cask to investigate long-term behavior of the spent fuel related parameters and the radiological consequences. It is shown that at the beginning of the dry storage period, cladding hoop stress levels sufficient to cause hydride reorientation could be present in fuel rods with a burnup higher than 55 GWd/tHM. The long-term behavior of the cladding temperatures indicates the possibility of reaching the ductile-to-brittle transition temperature during extended storage scenarios. Surface dose rates are 3 times higher when a cask is partially loaded with 4 MOX fuel assemblies. Due to radioactive decay, long-term storage will have a positive impact on the radiological environment around the cask.     

Thermal analysis of a storage cask for 24 spent PWR fuel assemblies

Abstract

The purpose of this paper is to perform a thermal analysis of a spent fuel storage cask in order to predict the maximum concrete and fuel cladding temperatures. Thermal analyses have been carried out for a storage cask under normal, off-normal and accident conditions. The environmental temperature is assumed to be 27°C under the normal condition. The off-normal condition has an environmental temperature of 40°C. An additional off-normal condition is considered as a partial blockage of the air inlet ducts. Four of the eight inlet ducts are assumed to be completely blocked. The accident condition is defined as a 100% blockage of air inlet ducts. The storage cask is designed to store 24 PWR spent fuel assemblies with a burn-up of 55,000 MWD/MTU and a cooling time of 7 years. The decay heat load from the 24 PWR assemblies is 25.2 kW. Thermal analyses of the ventilation system have been carried out for the determination of the optimum duct size and shape. The finite-volume computational fluid dynamics code FLUENT was used for the thermal analysis. From the results of the analysis, the maximum temperatures of the fuel rod and concrete overpack were lower than the allowable values under the normal, off-normal and accident conditions.     

Moving the Largest Capacity PWR Dual-Purpose Cask in the World from Gösgen NPP to the Zwilag Interim Storage Site

Abstract

The Swiss Gösgen nuclear power plant (NPP) has decided to use two different methods for the disposal of its spent fuel. (1) To reprocess some of its spent fuel in dedicated facilities. Some of the vitrified waste from the reprocessing plant will be shipped back to Switzerland using the new COGEMA Logistics, TN81 cask. (2) To ship the other part of its spent fuel to the central interim storage facility at Zwilag (Switzerland) using a COGEMA Logistics dual-purpose TN24G cask. The TN24G is the heaviest and largest dual-purpose cask manufactured so far by COGEMA Logistics in Europe. It is intended for the transport and storage of 37 pressurised water-reactor (PWR) spent fuel assemblies. Four casks were delivered by COGEMA Logistics to Gösgen NPP. Three transports of loaded TN24G casks between Gösgen and Zwilag were successfully pelformed at the beginning of 2002 using the new COGEMA Logistics Q76 wagon specifically designed to transport heavy casks. This article describes the procedure of operations and shipments for the first TN24G casks up to storage at Zwilag. The fourth shipment of loaded TN24G was due to take place in October 2002. The TN24G cask, as part of the TN24 cask family, proved to be a very efficient solution for Kemkraftwerk Gösgen spent fuel management.     

Safety Margins of Spent Fuel Transport and Storage Casks Considering Aircraft Crash Impacts

Abstract

The safety of spent fuel transport casks in severe accident conditions is always a matter of concern. This paper surveys German missile impact tests that have been carried out in the past to demonstrate that German cask designs for transport and interim storage are safe even under conditions of an aircraft crash impact. A fire test with a cask beside an exploding propane vessel and temperature calculations concerning prolonged fires also show that the casks have reasonably good safety margins in thermal accidents beyond regulatory fire test conditions.     

German approach and feedback on experience of transportability of SNF packages after interim storage

In Germany, the concept of dry interim storage of spent fuel in dual purpose metal casks is implemented, currently for periods of up to 40 years. The casks being used have an approved package design in accordance with the international transport regulations. The license for dry storage is granted on the German Atomic Energy Act with respect to the recently revised ‘Guidelines for dry interim storage of irradiated fuel assemblies and heat-generating radioactive waste in casks’ by the German Waste management Commission. For transport on public routes between or after long term interim storage periods, it has to be ensured that the transport and storage casks fulfil the specifications of the transport approval or other sufficient properties, which satisfy the proofs for the compliance of the safety objectives at that time. In recent years, the validation period of transport approval certificates for manufactured, loaded and stored packages were discussed among authorities and applicants. A case dependent system of 3, 5 and 10 years was established. There are consequences for the safety cases in the Package Design Safety Report, including evaluation of long term behaviour of components and specific operating procedures of the package. The present research and knowledge concerning the long term behaviour of transport and storage cask components have to be consulted as well as experiences from interim cask storage operations. Challenges in the safety assessment are e.g. the behaviour of aged metal and elastomeric gaskets under IAEA test conditions to ensure that the results of drop tests can be transferred to the compliance of the safety objectives at the time of transport after the interim storage period. Assessment methods for the material compatibility, the behaviour of fuel assemblies and the aging behaviour of shielding parts are issues as well. This paper describes the state of the art technology in Germany, explains recent experience on transport preparation after interim storage and points out arising prospective challenges.     

Safety Aspects of Long-term Dry Interim Storage Of Type-b Spent Fuel and Hlw Transport Casks

Abstract

Based on the German decision to minimise transport of spent fuel casks between nuclear power plants, reprocessing plants and central storage facilities several on-site storage facilities were licensed until the end of 2003. Because of the large amount of Type B(U) transport casks which are going to be used for long-term interim storage the question of timelimited Type B(U) licence maintenance during the storage period of up to 40 years has been discussed under different aspects. This paper describes present technical aspects of the discussion. A main aspect of qualification of transport casks for interim storage is the long-term behaviour of the metallic seal–lid system. Here results are presented from current long-term experimental tests with metallic 'Helicoflex' seals in which pool water is enclosed. This series of tests has been performed by the Federal Institute for Materials Research and Testing (BAM) on behalf of the Federal Office for Radiation Protection (BfS) since 2001. Finally, the paper presents a German concept for an exchange of experience, know-how and state-of-the-art between authorities and technical experts with regard to cask dispatch in nuclear facilities. BAM has taken over a central role in this so-called 'coordinating institution for cask dispatching information' ('KOBAF') which entails management of an online database of cask-specific documents and a technical working group meeting twice a year. The goal is to keep comparable technical standards for all nuclear sites and storage facilities which are going to load and dispatch casks of the same or similar types under the responsibility of different German state governments for the coming decades.     

Spent fuel transport cask thermal evaluation under normal and accident conditions

The casks used for transport of nuclear materials, especially the spent fuel element (SPE), must be designed according to rigorous acceptance criteria and standards requirements, e.g. the International Atomic Energy Agency ones, in order to provide protection to people and environment against radiation exposure particularly in a severe accident scenario.The aim of this work was the evaluation of the integrity of a spent fuel cask under both normal and accident scenarios transport conditions, such as impact and rigorous fire events, in according to the IAEA accident test requirements. The thermal behaviour and the temperatures distribution of a Light Water Reactor (LWR) spent fuel transport cask are presented in this paper, especially with reference to the Italian cask designed by AGN, which was characterized by a cylindrical body, with water or air inside the internal cavity, and two lateral shock absorbers.Using the finite element code ANSYS a series of thermal analyses (steady-state and transient thermal analyses) were carried out in order to obtain the maximum fuel temperature and the temperatures field in the body of the cask, both in normal and in accidents scenario, considering all the heat transfer modes between the cask and the external environment (fire in the test or air in the normal conditions) as well as inside the cask itself.In order to follow the standards requirements, the thermal analyses in accidents scenarios were also performed adopting a deformed shape of the shock absorbers to simulate the mechanical effects of a previous IAEA 9 m drop test event. Impact tests on scale models of the shock absorbers have already been conducted in the past at the Department of Mechanical, Nuclear and Production Engineering, University of Pisa, in the ‘80s. The obtained results, used for possible new licensing approval purposes by the Italian competent Authority of the cask for PWR spent fuel cask transport by the Italian competent Authority, are discussed.     

BWR spent fuel transport and storage with TN9/4 and TN24BH casks

Abstract

In 2001 the Swiss nuclear utilities started to store spent fuel in dry metallic dual purpose casks at ZWILAG, the Swiss interim storage facility. BKW FMB Energy Ltd, as the owner of the Mühleberg nuclear power plant, is involved in this process and has selected to store the spent fuel in a new high capacity dual purpose cask, the TN24BH. For the transport Cogema Logistics has developed a new medium size cask, the TN9/4, to replace the NTL9 cask, which has performed numerous shipments of BWR spent fuel in past decades. Licensed by the IAEA 1996, the TN9/4 is a 40 t transport cask, for seven BWR high burnup spent fuel assemblies. The spent fuel assemblies can be transferred to the ZWILAG hot cell in the TN24BH cask. These casks were first used in 2003. Ten TN9/4 shipments were made, and one TN24BH was loaded. After a brief presentation of the operational aspects, the paper will focus on the TN24BH high capacity dual purpose cask and the TN9/4 transport cask and describe in detail their characteristics and possibilities.     

Safety Concerning Transportation of Spent Fuel

The Central Research Institute of Electric Power Industry (CRIEPI) has been conducting, under contract with the Science and Technology Agency of Japan, the spent fuel transport cask reliability demonstration test since 1977 to verify the safety and reliability of spent fuel transport casks. The first phase of this test was completed in 1987.

In this demonstration test, both 50 t and 100 t class of casks, designed and manufactured by current techniques, were subjected to tests to verify the integrity and adequacy of the design and manufacturing techniques through observation of behavior of the cask under test conditions. The casks were subjected to tests under normal conditions and under the accident conditions specified in the Japanese regulations and the IAEA regulations, and also to pressure tests, which were performed from the viewpoint of safety in shipping, although by sea, this is not specified in the Japanese regulations.

From the test results, it was confirmed that the 1001 class cask maintained its integrity and characteristics in conformity with regulations even after accident condition tests. It is clear that the design concept and manufacturing procedure employed for this cask is adequate.     

Transport of MOX fuel: continuous challenge

Abstract

For 45 years TN International has been involved in the radioactive materials transportation field. Since the beginning the spent nuclear fuel transportation has been its core business. During all these years TN International, now part of AREVA, has been able to anticipate and fulfil the needs for new transport or storage casks design to fit the nuclear industry evolutions. A whole fleet of casks able to transport all the materials of the nuclear fuel cycle has been developed. This paper focuses on the casks used to transport the fresh and used mix oxide (MOX) fuel. To transport the fresh MOX boiling water reactor and pressurised water reactors fuel, TN International has developed two designs of casks: the MX 6 and the MX 8. These casks are and have been used to transport MOX fuel for French, German, Swiss and in a near future Japanese nuclear power plants. A complete set of baskets have been developed to optimise the loading in terms of integrated dose and also of course capacity. Mixed oxide used fuel has now its dedicated cask: the TN 112 which certificate of approval has been obtained in July 2008. This cask is able to transport 12 MOX spent fuel elements with a short cooling time. The first loading of the cask has been performed in September 2008 in the Electricité de France nuclear power plant of Saint-Laurent-des-Eaux. By its continuous involvement in the nuclear transportation field, TN International has been able to face the many challenges linked to the radioactive materials transportation especially talking of MOX fuel. TN International will also have to face the increasing demand linked to the nuclear renaissance.     

Finite element analyses and verifying tests for a shock-absorbing effect of a pad in a spent fuel storage cask

A spent fuel storage cask is required to prove the safety of its canister under a hypothetical accidental drop condition which means that the canister is assumed to be free dropped on to a pad of the storage cask during the loading of the canister into a storage cask. In this paper, finite element analyses and verifying tests for a shock-absorbing effect of a pad in a spent fuel dry storage cask were carried out to improve the structural integrity of the canister under a hypothetical accidental drop condition. The pad of the storage cask was originally designed as cylindrical steel structure filled with concrete. The pad was modified by using the structure composed of steel and polyurethane-foam instead of the quarter of the upper concrete as an impact limiter. The effects of the shape and the thickness of the steel structure and the density of the polyurethane-foam which was used in between steel structures were studied. As the optimized pad of a spent fuel dry storage cask, the quarter of the upper concrete was replaced with 12 mm thick circular steel structure and polyurethane-foam whose density was 85 kg/m³. The drop tests of a 1/3 scale model for the canister on to the original pad and the optimized pad were conducted. The effect of the pad structure was evaluated from the drop tests. The optimized pad has a greater shock-absorbing effect than the original pad. In order to verify the analysis results, strains and accelerations in the time domain by the analytical methods were compared with those by a test. The numerical method of simulating the free drop test for a dry storage cask was verified and the numerical results were found to be reliable.     

Thermal characteristics of aged spent fuel in a dry environment

Shipment of spent nuclear fuel from operating reactors is an important link in resolving the fuel storage and nuclear waste problems. Certain thermal problems must be considered. The nuclear spent fuel, even after a period of pool storage, has sufficient decay heat to necessitate special handling when being shipped to an off-site location. This paper presents the results of development related to the thermal interaction between dry spent fuel casks and nuclear fuel under operating situations. The tests were performed at the Barnwell Nuclear Fuel Plant (BNFP) using full-sized truck and rail casks and electrically heated dummy fuel assemblies. The safe and practical operation of the equipment developed has been shown.     

Mobile system for the management of fuel assemblies from research reactors

Interim storage in transport and storage casks of the CASTOR type, and later the final storage of these casks are planned for the management of spent fuel assemblies from German research reactors.A mobile transfer unit is used for loading the casks with fuel assemblies on the reactor sites. Key components of the mobile transfer unit are a transfer cask, the recharging lock, and an air-cushion transport system. By means of the air-cushion transport system, the whole equipment, as well as the CASTOR casks, is transported into the reactor building. Thus, handling of the 16 t CASTOR casks is possible even on reactor sites within sufficient crane capacity. A 20 ft container accommodates the mobile transfer unit and all accessories so that the whole equipment can be transported to the reactor sites by truck.     

Cooldown testing of nuclear fuel casks

Shipment of spent nuclear fuel from operating reactors is an important link in resolving the fuel storage and nuclear waste problems. Certain thermal problems must be considered. The nuclear spent fuel, even after a period of pool storage, has sufficient decay heat to necessitate special handling when being shipped to an off-site location. This paper presents the results of development related to the thermal interaction between dry spent fuel casks and nuclear fuel under operating situations. The tests were performed at the Barnwell Nuclear Fuel Plant (BNFP) using full-sized truck and rail casks and electrically heated dummy fuel assemblies. The safe and practical operation of the equipment developed has been shown.     

Consideration of aging mechanism influence on transport safety of dual purpose casks for spent nuclear fuel or HLW

When storage of spent nuclear fuel or high level waste is carried out in dual purpose casks (DPC), the effects of aging on safety relevant DPC functions and properties have to be managed in a way that a safe transport after the storage period of several decades is capable and can be justified and certified permanently throughout that period. The effects of aging mechanisms (e.g. radiation, different corrosion mechanisms, stress relaxation, creep, structural changes and degradation) on the transport package design safety assessment features have to be evaluated. Consideration of these issues in the DPC transport safety case will be addressed. Special attention is given to all cask components that cannot be directly inspected or changed without opening the cask cavity, like the inner parts of the closure system and the cask internals, like baskets or spent fuel assemblies. The design criteria of that transport safety case have to consider the operational impacts during storage. Aging is not the subject of technical aspects only but also of ‘intellectual’ aspects, like changing standards, scientific/technical knowledge development and personal as well as institutional alterations. Those aspects are to be considered in the management system of license holders and in appropriate design approval update processes. The paper addresses issues that are subject of an actual International Atomic Energy Agency TECDOC draft ‘Preparation of a safety case for a dual purpose cask containing spent nuclear fuel’.     

Safety of transport of radioactive Material: 2004 in retrospect

Abstract

There are basically two main technologies for the intermediate storage of spent nuclear fuel in Europe: dry storage in casks or vaults and wet storage in pools. The advantage of casks is their modularity and hence investment can be phased to suit the planned dates of loading individual casks, pools and vaults usually provide longer term capacity and thus require a greater initial investment for operators. Transnucléaire has developed a range of modular dry cask solutions for customers and more than 100 examples of the TN 24 type cask have been licensed for transport and storage in Belgium, Switzerland, Italy, Germany, the United States of America and Japan. This paper compares the requirements for cask licensing in Europe and the USA and shows how two particular BWR cask designs were developed by Transnucléaire. (1) The TN 97 L cask was designed primarily for the European market and the first use is foreseen at the Leibstadt nuclear power station in Switzerland. (2) The TN 68 cask was designed by Transnuclear Inc. and its first use is foreseen at the Philadelphia Electric Company's Peach Bottom Atomic Power Station.     

Adaptation of Approved Transport and Storage Cask Lines to Individual Customer Requirements

Abstract

Within the decommissioning programmes of the Italian nuclear power plants, the Italian multi-utility company ENEL decided to rely on on-site dry storage while waiting for the availability of the national interim storage site. SOGIN (Società Gestione Impianti Nucleari SpA, Rome, Italy), now in charge of all nuclear power plant (NPP) decommissioning activities was created in the ENEL group but is now owned by the Italian government. In 2000 it ordered 30 CASTOR® casks for the storage of its spent fuel not covered by existing or future reprocessing contracts. Ten CASTOR X/A17 casks will contain the Trino pressurised water reactor (PWR) fuel and the Garigliano boiling water reactor (BWR) fuel currently stored in pools at the nuclear power plant Trino and the Avogadro nuclear facility at Saluggia. Additionally 20 CASTOR X/B52 casks will contain the BWR fuel assemblies, which are stored in the pool at the Caorso nuclear power plant. GNB (Gesellschaft fuer Nuklear-Behaelter mbH, Essen, Germany) has completed detailed studies for the design of both types of cask. The tailored cask design is based on the well-established and proven design features of CASTOR reference casks and is responsive to the needs and requirements of the Italian fuel and handling conditions. The design of the CASTOR X/A17 for up to 17 Trino PWR fuel assemblies or 17 Garigliano BWR fuel assemblies and the CASTOR X/B52 cask holding up to 52 Caorso BWR fuel assemblies is suitable for the following conditions of use: loading of the casks in the fuel pools of the nuclear installations at Trino, Caorso and Avogadro; no upgrading of the Current on-site crane capacities; transport of the fuel assemblies, which are currently stored at the Saluggia facility to the nuclear power plant Trino; on-site storage in a vertical or horizontal position with the possibility of transfer to another temporary storage or a final repository, even after a number of years; the partial loading of mixed oxide (MOX) and failed fuel; loading and drying of bottled Garigliano fuel assemblies. On the basis of the CASTOR V/19 and CASTOR V/52 cask lines, the design of the CASTOR X/A17 and X/B52 casks aims at optimising safety and economics under the given boundary conditions. The long time for which fuel is kept in intermediate wet storage results in a reduced shielding and thermal-conduction requirement. This is used to meet the tight mass and geometry restrictions while allowing for the largest cask capacity possible.