Springtime Monitoring of Passive Cool Roofs in Subtropical Climate

Passive strategies for acclimatization of buildings have been studied by several authors in many countries, especially the evaporative and radiant cooling techniques. Fiber cement tiles are very common in popular constructions due to their low cost. However, they have over twice of the value thermal transmittance indicated to this bioclimatic zone according to Brazilian guidelines. The objective is to present an alternative to reduce high temperatures on fiber cement tiles. In this paper, the monitoring of passive cooling of roofing during the spring season in a city with subtropical climate is described. Single and combined reflective and evaporative cooling systems were studied in different environmental conditions. Internal surface temperatures of tiles were monitored together with weather variables. Results show a decrease of about 6 ℃, 9 ℃, 10 ℃ and 11 ℃ as compared to the original tiles according to environment conditions and the combined passive cooling techniques. These results allow for the conclusion that the use of passive cooling techniques opens up new possibilities to attenuate the internal surface temperatures of tiles and to consequently decrease the roofing solar heat gain into buildings, thus, providing less air cooling energy consumption.     

Key technologies on heating/cooling cost allocation in multifamily housing

Heating/cooling cost allocation is of growing concern in many countries because it contributes much to the energy conservation of central air-conditioning system. This paper intends to summarize the current studies and techniques on the heating/cooling cost allocation and discuss about the key problems to them. The contents mainly include the following parts: (1) probing into the methods of heating/cooling measurement; (2) establishing the calculation model for thermal billing; (3) presenting several typical systems for heating/cooling cost allocation. The significance of the paper is to help the engineers in this field have a good idea of the current development of heating/cooling cost allocation and promote the application of the relevant technologies to practice.     

基于的热泵与水泵联合优化运行仿真及操作软件

研究热泵空调系统在全年变负荷运行下,为了减少热泵系统运行的有效能损失,提高能量利用的完善度,在满足系统供冷、供热的可靠运行条件下,以系统总损失(热泵机组和水泵损失)最小为目标函数,即minE=Epc+Epe+Ecom+Ec+Ee+Elip(E表示水源系统总的损失;Epc表示冷凝器侧水泵的损失;Epe表示蒸发器侧水泵的损失;Ecom表示压缩机的损失;Ec表示冷凝器的损失;Ee表示蒸发器的损失;Elip表示节流结构的损失),并从系统结构设计及主要功能、仿真模型的建立、建立开放型数据库、系统优化运行仿真可视化等方面,介绍在微机上基于可视化的热泵系统优化运行仿真系统的研究成果。通过一个实例详细地介绍了整个优化过程,并将优化结果以图文并茂的形式显示出来,可为空调系统优化设计、运行提供参考,为热泵系统在微机上实现在线优化控制策略奠定了基础。     

Net-Zero Energy Building Enhancement for a Leadership in Energy and Environmental Design Platinum Educational Facility

In the United States, university buildings use 17% of total non-residential building energy per year. According to the NREL （National Renewable Energy Laboratory）, the average lifecycle of a building in a university is 42 years with an EUI （energy use intensity） of 23 kWh/m^2/y. Current building and energy codes limit the EUI to 16 kWh/m^2/y for new school buildings; this benchmark can vary depending on climate, occupancy, and other contextual factors. Although the LEED （leadership in energy and environmental design） system provides a set of guidelines to rate sustainable buildings, studies have shown that 28%-35% of the educational LEED-rated buildings use more energy than their conventional counterparts. This paper examines the issues specific to a LEED-rated design addition to an existing university building. The forum, a lecture hall expansion of to an existing building at the University of Kansas, has been proposed as environmentally friendly and energy-efficient building addition. Comfort and health aspects have been considered in the design in order to obtain LEED platinum certificate. The forum＇s energy performance strategies include a double-skin facade to reduce energy consumption and PV （photovoltaic） panels to generate onsite energy. This study considers various scenarios to meet NZEB （net-zero energy building） criteria and maximize energy savings. The feasibility of NZE criteria is evaluated for： （a） seasonal comparison; （b） facility occupancy; （c） PV panels＇ addition in relation to double skin facade. The results of NZEB approach are compared to LEED platinum requirements, based on Rol （return on investment） and PV panel＇s efficiency for this specific educational building.     

Medium-Deep or Very Deep Disposal of Highly Radioactive Waste？

Commonly proposed concepts, like KBS-3V, for disposal of highly radioactive waste imply construction at medium depth （400-600 m） in granitic rock, which is excellent for constructing a stable repository. VDH （very deep boreholes） represent an altemative concept with the advantage that the rock is much less permeable and that the very salt, heavy groundwater is stagnant. Both require engineered barriers in the form of canisters and waste-embedding clay but for somewhat different purposes. Canisters are the most important waste-isolating barriers for KBS-3V but are less important for VDH. The waste-embedding clay is needed for preserving the KBS-3V canisters by being tight and ductile, but plays a minor role for the VDH. The backfilled deposition tunnels in a KBS-3V repository provide very limited hindrance of radionuclides to move to the biosphere while the clay seals of VDH effectively prevent possibly released radionuclides to reach up to the biosphere. Comparison of the KBS-3V and VDH concepts indicates that the last mentioned one has several advantages but that certain issues remain to be worked on for becoming a number one candidate.     

The Industrial Heritage and the New Architecture： Teaching, Researching, Designing the Place Identity

The new architecture may provide unusual opportunities for the abandoned areas involved by former industrial processes, both in the city centers and in the landscape. In fact, it may create new centralities and give new collective function for deprived areas. The case study of the architectural and educational project for a new museum park devoted to the technique and the science in the Apennine＇ s landscape near Parma （Italy） may give an interesting point of view about the role of the teaching and the research of the architecture in the former industrial heritage, and to avoid the abandonment and the pauperization of the territory around.     

A Case Study for End of Life Reuse and Recycling Survey Methodologies： The Hollentalanger Cottage

Up to now, reuse and recycling of existing buildings have not been examined widely. This paper discusses the theories, methods and practicalities of buildings＇ end of life with a main focus on planning and managing reuse and recycling of existing buildings. Our aim is the realistic modelling of theoretical scenarios for end of life based on a case study. The methods of building survey, material classification and documentation for reuse, recycling and disposal of existing constructions are presented. Investigations and calculations were done on an existing cottage in the Alps. The ecologically most beneficial disposal phase of the old wooden hut is our main objective. Critical questions arise from the quality of the material and how it can be extracted, separated and balanced in an appropriate way. A systematic survey of the building by inspection of constructions and materials in iterative steps allows a detailed material balance with condition and property information. This information is crucial for scenarios and material flow analysis of demolished and rebuilt building in environmental system analysis. For future planning, the reuse and recycling of existing buildings should be integrated quite early in the planning process so that we can use the materials in the best way.     

Teaching Sustainability in Design without Greenwashing

Teaching design incorporating a sense of sustainability to architecture students is a challenge today, primarily because of the trend to label every design as sustainable or green even though it is no different from a more traditional one. The result is a ＂green-washed＂ education in architecture. To address this issue, this paper describes a teaching methodology of architectural design with a special focus on sustainability implemented in the Graduate School of Architecture in Clemson. This method includes an analysis of the location, the climate conditions, the materials needed and the construction process. Knowing that sustainable design is generally perceived as being expensive, there is a special focus on simplicity and affordability. Rather than relying on expensive technical solutions, students are encouraged to design for the given environment and apply passive strategies. In the approach discussed in this paper, the design process is a number of logical scientific decisions rather than an intuitive draft. The goal of this pedagogy is to raise awareness about how to handle global resources carefully and to show the importance of the later performance of the project as a key to design. The teaching strategy is described here along with the successful participation by our graduate students in a number of refereed competitions.     

Integration Possibility of Urban Public Bus System and Cable Car in Maribor

Combination of a bus system and cable car system can reduce the overall congestion of traffic in urban areas, where surrounding hills or mountains hold larger settlements or tourist and recreational infrastructure. With this kind of integration number of individual car trips can be significantly reduced. In this paper, the authors present an analysis of the pilot project implementation, which was held in Maribor. The authors conducted a limited test trial of two means of transportation, combining them into a single operating transport offer for inhabitants and tourists. Combined transport option proved to be a good starting point for reduction of traffic and parking congestion during winter tourist season and beyond. Method used in the research, in order to gain actual potential of integrating two systems and improving public transport offer, was establishment and implementation of the pilot project in Maribor during January 2011. Data was gathered through interviews of two interest groups. The first covered the users who were brought to the foothills of Pohorje＇s ski center by bus. The second covered the cable car users that were traveling to the top of Pohorje. For a limited time period, a trial principle of a single ticket was established, which gave ski-pass holders free bus ride on bus line No. 6. With the aim of reducing CO2, test drives of hybrid bus and compressed natural gas bus were conducted alongside many promotional activities with which users were informed of importance of environmentally friendly mobility options.     

Fuel Poverty and Comfort in Modern Residential Apartments in Developing Countries： A Case from Jordan

Energy is one of the most important resources in the economy of developing countries. Jordan depends mainly on imported oil and gas at international prices. This creates a heavy burden upon Jordanian national economy, which is reflected in the same time on other sectors of the Jordanian society. The ever increasing fuel prices make it very necessary to look for new renewable energy resources. Jordan as a developing country with its fast growing urban development and construction projects will be studied. It is worthy to study the dynamic relationship between end user, fuel and comfort in the residential sector. Energy is a chronic problem in Jordan, due to lack of non renewable energy resources, the end consumer is influenced by this fact, in achieving his basic energy needs. This study tries to shed light on the fuel poverty line, definitions and parameters of fuel poverty. And to study what has been done in this regard on both international and local level. No studies have been identified in Jordan which, explore the problem of fuel poverty, especially after the vast and recent increase in fuel prices internationally and locally. This study will follow theoretical and field survey to understand the relationship between comfort, energy and building fabric. Method will depend mainly on field survey and statistical data, and necessary measurements, questionnaires will be adopted when necessary to explore comfort levels related to fuel consumption. Summary and recommendations will be concerned with how thermal comfort could be achieved within the ranges of fuel accessibility, building fabric, minimum pollution and cost.     

On-Demand Post-Disaster Emergency Shelters

In post-disaster emergency shelter aid, various relief agencies and other actors with different backgrounds need to cooperate in a tremendously short amount of time and under very different circumstances. In this article, we describe a research project that develops and tests a new approach in which the demands for shelters in a specific situation are methodically connected with available, innovative and sustainable shelter solutions, a DSS （decision support system）. The DSS is a digital tool that translates the gathered evidence on needs, solutions and location including long-term effects of shelter provision into advice for the provision of sustainable, integral broader shelter solutions and designs. The outcome is a set of characteristics for a DSS for the provision of on-demand emergency shelters. A DSS that meets these characteristics leads to the provision of sustainable shelters that meet the needs of the users and, therefore, have higher performance in long term.     

Spatial Distribution of Internal Temperatures in a LGR （Light Green Roof） for Brazilian Tropical Weather

This article aims to assess the spatial distribution of the IST （internal surface temperatures） in the ceiling and DBT （dry bulb temperatures） of a LGR （light green roof） in a test cell. Cover systems known as green roofs have the potential to retain rainwater and help reduce runoff. However, the characteristic considered in this work is the insulation capacity of this kind of coverage. To evaluate the spatial distribution of temperatures in an environment with light green roof, we proposed a new method for acquisition of series of climatological data and temperatures according to spatial and temporal approaches of dynamic climatology. Climatological data were provided by an automatic weather station and temperatures were collected in a test cell with light green roof. The spatial distribution of surface temperatures and internal air temperature （DBT） are based on the concepts of a climatic episode and typical experimental day from the study of the dynamic climatology. The results led to the conclusion that the light green roof has a balanced spatial distribution of the IST and of the internal air temperature （DBT）, i.e., without substantial variations over the day. The new methodology also showed the importance of specifying the location of the sensors and automatic weather station in experimental studies on the thermal behaviour of buildings.     

Organizational Trouble Shooting through Integration between the Theory of the Restrictions Thinking Process and Lean Tools

The theory of constraints thinking process, created by Israeli physicist Eliyahu M. Goldratt, has emerged as a tool for achieving competitive advantage. Many researches also focused on the application of lean thinking developed by Toyota and proposed by Ohno. This philosophy has been proven to be effective in several production processes. This paper aims to propose a method of problem solving through the integration of theory of constraints thinking process and the principles of lean production. As a tool for problem identification, the method defends the use of current reality tree and, to solve problems, the lean thinking tools, proposed by Picchi. The developed method was implemented in a contractor. The research methodology was research-action. Among the results, there was a realistic diagnosis about the core problems in company. According to this, the core problem of the contractor is “the lack of commitment of manpower” that results in the main problem “the financial loss”. The principle of perfection was verbalized as a proposal to solve the problems and the tools to be implemented for solving problems were “commitment of senior management to employees” and “simplicity in communication”.     

Climate Change and Future Long-Term Trends of Rainfall at North-East of Iraq

Iraq is facing water shortage problem despite the presence of the Tigris and Euphrates Rivers. In this research, long rainfall trends up to the year 2099 were studied in Sulaimani city northeast Iraq to give an idea about future prospects. The medium high （A2） and medium low B2 scenarios have been used for purpose of this study as they are more likely than others scenarios, that beside the fact that no climate modeling canter has performed GCM （global climate model） simulations for more than a few emissions scenarios （HadCM3 has only these two scenarios） otherwise pattern scaling can be used for generating different scenarios which entail a huge uncertainty. The results indicate that the average annual rainfall shows a significant downward trend for both A2 and B2 scenarios. In addition, winter projects increase/decrease in the daily rainfall statistics of wet days, the spring season show very slight drop and no change for both scenarios. However, both summer and autumn shows a significant reduction in maximum rainfall value especially in 2080s while the other statistics remain nearly the same. The extremes events are to decrease slightly in 2080s with highest decrease associated with A2 scenario. This is due to the fact that rainfall under scenario A2 is more significant than under scenario B2. The return period of a certain rainfall will increase in the future when a present storm of 20 year could occur once every 43 year in the 2080s. An increase in the frequency of extreme rainfall depends on several factors such as the return period, season of the year, the period considered as well as the emission scenario used.     

Improvement Properties of Cohesion-Less Soil Using Recycled Bassanite

Solid waste management is a serious problem over the world. Therefore, reduction, re-use and recycling of waste have become major issues in recent days. Gypsum waste plasterboard is considered one example of these waste materials. This study evaluates the use of recycled bassanite, which is derived from gypsum waste plasterboard, to enhance the performance of two types of cohesion-less soil. Recycled bassanite was utilized as a stabilizing agent to improve both compressive and splitting strengths of the tested soil. The effect of bassanite content, soil type, water content and curing time were investigated to explore the behavior of treated soil with recycled bassanite. Test results showed that increase of bassanite content is associated with increase in optimal moisture content, while no significant increase in the dry unit weight was observed. Both compressive and splitting tensile strengths enhanced with the additives of recycled bassanite. The increase of bassanite content had a more significant effect on the compressive strength compared with the effect on tensile strength. The use of recycled bassanite to enhance the strength of sandy soil had a more significant effect compared with silty soil. The effect of curing time on the strength of treated samples was more significant in early curing ages compared with late curing ages. The strength decreased significantly in case of stabilized samples prepared with water content at the wet-side of the compaction curve. However, insignificant decrease in the strength of the stabilized sample was detected with moisture content at the dry-side of compaction curve. This research meets the challenges of our society to reduce the quantities of gypsum wastes, producing useful material from waste materials that will help to a sustainable society.     

Behavior of Millstone Masonry Vaults Strengthened by Composite Materials

Sewerage systems first appeared in Paris in the middle of 19th century. Even if the majority of structures are still in working order, their general state will deteriorate inexorably, and as reconstruction is not always possible for cost and social impact reasons, rehabilitation is a solution adopted by many clients. It is necessary to resort to new rehabilitation techniques. Reinforcement by bonding composite materials has many advantages compared to other techniques. The objective of the experimental campaign presented in this paper is to study the addition of a lining by means of mortar reinforced by thin composite materials so as to restore masonry structures. To that purpose, crushing tests on masonry vaults have been carried out. The application of a lining made of mortar reinforced with composite materials has allowed increasing the breaking load and delaying the occurrence of the first cracks. This article presents the characterization of the materials. Moreover, the results of the breaking tests applied to masonry vaults are shown in this paper. A comparison with a traditional type of rehabilitation by a 6 cm-thick shotcrete lining will be performed.     

Images of the Future from the Past： The Metabolists and the Utopian Planning of the 1960s

During the 1960s, many changes reshaped the economy, the society and the arts. The Cold War, the Space Race, the construction of a new middle class in most western societies led by the postwar economic prosperity with unprecedented urban growth followed by severe environmental problems fostered the design of spectacular urban utopian cities and mega-architectures. In those years, Japan was the source of highly influential bold and visionary urban and architectural ideas which relied on advanced technology. These ideas were conceived on the thought that cities could be seen as gigantic but impermanent entities able to transform itself according to an organic process of adaptation of its elementary components. This paper briefly revisits and critically discusses the legacy of the iconic mega-strnctural projects of Japanese Metabolist Movement and other visionary architects and planners of the 1960s, such as Paolo Soleri, Buckminster Fuller, Archigram. It attempts to enlighten the continuity with contemporary innovative and experimental urban models and ideas for the society and the city of the future, such as the Smart Cities, Eco-Cities, Green Urbanism, whose design is led by concerns related to climate change, the necessity of energy efficiency, the improvement of urban landscape and the valorization of depleted natural resources.     

A User-Oriented Implementation of Risk Breakdown Structure in Construction Risk Management

The construction industry works under conditions of uncertainties and risks leading to poor performance, increased cost and time and decreased quality. In these conditions, the dynamic identification and assessment of project risks among a vary range of potential factors is considered of vital importance. The introduction of RBS （risk breakdown structure） as a hierarchically organized depiction of identified risks was considered a suitable tool in risk management, especially in construction, due to its many advantages in synthetic representation and dynamic nature. This paper presents a user-oriented implementation of RBS to assist the project managers in identifying and assessing potential risk factors affecting construction process. The evidential analogies between WBS （work breakdown structure） and RBS are captured and used in the proposed framework which interconnects them into a 2D （two dimensional） matrix used to associate risks to the specific project activities. The proposed framework is applied to a government funded design-bid-build project. The obtained results clearly demonstrate the advantages in identifying the most risky activities, as well as the most important risk factors affecting the whole project.     

Volumetric Variation and Rheology of Cement Based Mineral Additions （Blast Furnace Slag and Silica Fume）

The partial substitution of clinker by mineral additions offers very significant, both economical and environmental benefits. This adds value to industrial waste, and contributes also in the preservation of natural resources, like clay and limestone, as well as the reduction of greenhouse gas emissions （CO2）. This study is interested in the simultaneous effect of BFS （blast furnace slag） and SF （silica fume） on setting time and water requirement of cement paste. The volumetric variations are tested in mortars, prepared in the same mixture of pastes, and the tests indicate that the addition of slag increase the fluidity, reduce the water demand, shrinkage and expansion, compared to the mortar, containing ten percent （10%） of Silica Fume only. The images of pastes obtained by SEM （scanning electron microscopy）, are indicated an improvement of the microstructure of the paste with a large amount of slag, which leads to improve durability.