Epsilon‐shaped circularly polarized strip and slot‐loaded ultra‐wideband antenna for Ku‐band and K‐band

A compact epsilon‐shaped (ε) ultra‐wideband (UWB) antenna for dual‐wideband circularly polarized (CP) applications has been investigated in this article. It consists of a stepped stub loaded modified annular ring‐shaped radiator and modified CPW ground plane. The ground plane is loaded with two semicircular notches and a spiral‐shaped slot. The impedance bandwidth (IBW) is 97.02% (10.4‐30 GHz) along with an overall footprint of 20 × 20 mm². The fractional axial ratio bandwidth (3‐dB ARBW) for two wide bands is 38.50% (13.30‐19.64 GHz) and 6.45% (26.25‐28.00 GHz), respectively. The proposed antenna is left‐hand circularly polarized with a peak gain of about 5.09 and 5.14 dB in both 3‐dB ARBW bands. The proposed antenna is dominating other reported CP antenna structures in terms of number of CP bands, 3‐dB ARBW, IBW, peak gain, and dimensions.     

Modified octahedron shaped antenna with parasitic loading plane having dual band notch characteristics for UWB applications

The design of a compact modified octahedron shaped dual band notched ultra wide‐band antenna is presented in this article. The impedance bandwidth of the designed antenna has been enhanced by modifying the shape of the radiator by introducing fractal geometry and a modified ground plane. The proposed antenna offered an impedance bandwidth of 2.4 GHz–19.5 GHz (156% Fractional bandwidth). Two rectangular split ring resonator structures are introduced in the radiator to achieve two notched bands which ranges from 3.3 GHz to 3.7 GHz (WiMAX) and 5.15 GHz–5.85 GHz (WLAN) band. The antenna gain varies from 1 to 4 dBi over the operating band except the notched bands. The overall dimension of the designed antenna has a compact size of 33 × 40 mm². The experimental and simulation results are in good agreement. The proposed antenna has wider bandwidth and smaller dimension over the already reported in the literature. © 2016 Wiley Periodicals, Inc. Int J RF and Microwave CAE 26:426–434, 2016.     

Design and development of enhanced bandwidth multi‐frequency slotted antenna for 4G‐LTE/WiMAX/WLAN and S/C/X‐band applications

A multi‐frequency rectangular slot antenna for 4G‐LTE/WiMAX/WLAN and S/C/X‐bands applications is presented. The proposed antenna is comprised of rectangular slot, a pair of E‐shaped stubs, and an inverted T‐shaped stub and excited using staircase feed line. These employed structures help to achieve multiband resonance at four different frequency bands. The proposed multiband slot antenna is simulated, fabricated and tested experimentally. The experimental results show that the antenna resonates at 2.24, 4.2, 5.25, and 9.3 GHz with impedance bandwidth of 640 MHz (2.17‐2.82 GHz) covering WiMAX (802.16e), Space to Earth communications, 4G‐LTE, IEEE 802.11b/g WLAN systems defined for S‐band applications. Also the proposed antenna exhibits bandwidth of 280 MHz (4.1‐4.38 GHz) for Aeronautical and Radio navigation applications, 80 MHz (4.2‐4.28 GHz) for uncoordinated indoor systems,1060 MHz (5.04‐6.1 GHz) for the IEEE 802.11a WLAN system defined for C‐band applications and 2380 MHz (7.9‐10.28 GHz) defined for X‐band applications. Further, the radiation patterns for the designed antenna are measured in anechoic chamber and are found to agree well with simulated results.     

Compact dual wide‐band four/eight elements MIMO antenna for WLAN applications

A compact four and eight elements multiple‐input‐multiple‐output (MIMO) antenna designed for WLAN applications is presented in this article. The antenna operates in IEEE 802.11b/g WLAN (2.4 GHz), IEEE 802.11 ac/n WLAN (5.2 and 5.8 GHz) and WiMAX (5.8 GHz) bands. The resonated mode of the antenna is achieved by two unequal Reverse‐L shaped, line‐shaped slots on top and parasitic element on the ground layer. The single antenna provides wide bandwidth of about 29% (2.3‐3.1 GHz) in lower and 22% (4.9‐6.1 GHz) in the upper band. The compactness of the single element antenna is found about 95% with respect to the patch and 61% in overall dimension. Thereafter an investigation is carried out to design two, four, and eight elements MIMO antennas. All of the multi‐element structures provide compact configuration and cover entire WLAN frequency ranges (2.4‐2.48 and 5.15‐5.85 GHz). The dimension of the proposed eight element MIMO antenna is 102 × 52 × 1.6 mm³. It covers the frequency (measured) from 2.4 to 3.1 GHz and 5 to 6.1 GHz. The diversity performance of the proposed MIMO antenna is also assessed in terms of the envelope correlation coefficient (ECC), diversity gain (DG), and total active reflection co‐efficient (TARC). The ECC is found <0.5 whereas the DG >9.0 is obtained for the desired bands.     

Dual‐band dual‐polarized hybrid aperture‐cylindrical dielectric resonator antenna for wireless applications

A dual‐band dual‐polarized hybrid aperture‐cylindrical dielectric resonator antenna (CDRA) is examined in this article. Inverted regular pentagon shaped aperture is not only used to launch two radiating hybrid modes (HEM_11δ and HEM_12δ mode) in CDRA but also act as a radiator. Out of two frequency bands, the lower frequency band is linearly polarized while upper frequency band is the combination of both circular and linear polarization. A circular polarization (CP) characteristic in upper frequency band is created by loading quarter annular stub with microstrip line. LHCP/RHCP can easily be controlled by alternating the position of quarter annular stub. It is operating over two frequency ranges i.e. 2.48‐2.98 GHz and 4.66‐5.88 GHz with the fractional bandwidth 18.31% and 23.14% respectively. Axial ratio bandwidth (3‐dB) is approximately 8.78% (4.9‐5.35 GHz) in upper frequency band. The proposed antenna design is suitable WiMAX (2.5/5.5 GHz) and WLAN (2.5/5.5 GHz) applications.     

Dual‐band circularly polarized dielectric resonator antenna for wireless applications

This letter investigates an integrated antenna configuration for WLAN/WiMAX applications. The proposed composite antenna configuration is simply the grouping of ring dielectric resonator along with reformed square‐shaped slot antenna. Three significant characteristics of proposed article are: (1) aperture act as magnetic dipole and excite HE_11δ mode in ring dielectric resonator antenna; (2) reforming of square aperture generates orthogonal modes in ring DRA and creates CP in lower frequency band; (3) annular‐shaped Microstrip line along with reformed square aperture creates CP wave in upper frequency band. With the purpose of certifying the simulated outcomes, prototype of proposed structure is fabricated and tested. Good settlement is to be got between experimental and software generated outcome. Experimental outcomes show that the proposed radiating structure is operating over 2 frequency bands that is, 2.88‐3.72 and 5.4‐5.95 GHz. Measured 3‐dB axial ratio bandwidth in lower and upper frequency band is approximately 9.52% (3.0‐3.4 GHz) and 5.85% (5.64‐5.98 GHz), respectively. These outcomes indicate that the proposed composite antenna structure is appropriate for WLAN and WiMAX applications.     

A dual‐band circularly polarized antenna with aid of dual cylindrical dielectric resonator blocks

In this communication, a dielectric resonator based circularly polarized antenna is designed and investigated. A modified aperture is used to excite dual cylindrical dielectric resonator (CDR) blocks. Two important characteristics of the proposed radiator that makes it all the more attractive are as follows: (i) excitation of dual radiating modes that is, HEM_11δ and TE_01δ mode in cylindrical DR along with the support of dual‐band circularly polarized (CP) waves; (ii) arrangements of dual CDR blocks to reduce the Q‐factor which is useful to enhance the impedance bandwidth of both frequency bands. Fabrication as well as experimental measurement of the antenna prototype has been done for verifying simulation outcomes. This antenna design operates over dual frequency bands, that is, 5.01‐6.41 GHz and 7.3‐7.9 GHz with the fractional bandwidth of 24.73% and 9.39%, respectively. It supports CP waves over the frequency range 6.1‐6.5 GHz and 7.4‐7.8 GHz. The proposed antenna backs right‐hand circularly polarized (RHCP) radiation with an average gain of 4.5 dBi. These characteristics make it well fitted for WLAN, WiMAX (5.2/5.5/5.8 GHz), and downlink defense purpose satellite communication (7.2‐7.7 GHz).     

A CPW‐fed band notched wideband circularly polarized ZOR antenna based on CRLH‐TL approach

This article presents design and analysis of three wide band zeroth‐order resonance antennas (antennas I, II, and III) using composite right and left‐handed transmission line (CRLH‐TL) approach. Coplanar waveguide technology, single layer via‐less structures are used to have the design flexibility. The bandwidth characteristics are analyzed by using lumped parameters of CRLH‐TL. By introducing a simple slot in the ground plane of antenna I both bandwidth enhancement and circularly polarization characteristics are achieved in antenna II. Another quarter wave L‐shaped slot has been introduced in the ground plane of antenna II to introduce a notch band in the frequency response of antenna III. Achieved measured 10 dB return loss bandwidth of antenna I and antenna II are 960 (3.3‐4.26 GHz) and 2890 MHz (2.77‐5.66 GHz), respectively. Antenna III offers measured 10 dB return loss bandwidth of 3220 MHz (2.32‐5.54 GHz) with a band notch from 2.39 to 2.99 GHz that isolates the 2.4 GHz WLAN and 3.5 GHz WiMAX band. Antenna II and antenna III have circular polarization property with measured axial ratio bandwidth of 440 MHz. The measured peak realized gain of antennas II and III is around 1.53‐2.9 dBi.     

Broadband circularly polarized printed falcate‐shaped monopole antenna

In this study, a simple broadband circularly polarized (CP) printed monopole antenna for S/C‐band applications is proposed. The CP antenna is composed of a falcate‐shaped monopole with a right‐angle trapezoid stub, then wide impedance and axial ratio (AR) bandwidths are achieved. By placing one rectangular split‐ring resonator above the stub for generating upper CP mode, both of impedance and CP performances are further improved. The proposed antenna is fabricated on a FR4 substrate and measured. The measured ?10‐dB impedance bandwidth is 107%, ranging from 2.4‐7.9 GHz, and the measured 3‐dB AR bandwidth is 94% (2.4‐6.6 GHz), covering the entire wireless local area network (WLAN) and WiMAX bands.     

Hybrid cylindrical dielectric resonator antenna with HE11δ and HE12δ mode excitation for wireless applications

In this article, dual mode triple band hybrid cylindrical dielectric resonator antenna (CDRA) for different wireless applications is investigated. It is seen that annular ring shaped patch along with T‐shaped printed line behaves as a magnetic and electric dipole concurrently and create HE_11δ and HE_12δ mode in the proposed CDRA. Both of the hybrid modes radiate in broadside direction. The concept of hybrid antenna (the combination of annular ring patch and CDRA) is used to achieve triple‐band feature in the proposed antenna. Ansoft HFSS‐EM simulator is used to optimize the proposed antenna. Optimized simulated results have been practically confirmed by using the archetype of proposed antenna. The proposed radiator is applicable in three different frequency bands, that is, 2.24‐2.56 GHz, 3.28‐4.18 GHz, and 5.36‐5.8 GHz. It is appropriate for WLAN (2.4/5.8 GHz) and WiMAX (2.5/3.3/5.5 GHz) applications.     

A vertex‐fed hexa‐band frequency reconfigurable antenna for wireless applications

Present article embodies the design and analysis of an octagonal shaped split ring resonator based multiband antenna fed at vertex for wireless applications with frequency‐band reconfigurable characteristics. The proposed antenna is printed on FR4 substrate with electrical dimension of 0.4884 λ × 0.4329 λ × 0.0178 λ (44 × 39 × 1.6 mm³), at lower frequency of 3.33 GHz. The antenna consists of SRR based vertex fed octagonal ring as the radiation element and switchable reclined L‐shaped slotted ground plane. Antenna achieves six bands for wireless standards viz: upper WLAN (5.0/5.8 GHz), lower WiMAX (3.3 GHz), super extended C‐band (6.6 GHz), middle X band (9.9 GHz—for space communication), and lower K_U band (15.9 GHz—for satellite communication systems operating band). Stable radiation patterns are observed for the operating bands with low cross polarization. The proposed design achieves hexa band characteristics during switching ON state of PIN diode located at reclined L‐shaped slot in the ground plane. Experimental characteristic of antenna shows close agreement with those obtained by simulation of the proposed antenna.     

A compact double‐layer wideband circularly polarized microstrip antenna with parasitic elements

In this article, a new broadband circularly polarized (CP) microstrip patch antenna (MPA) with a sequential phase (SP) square‐loop feeding structure is proposed. The presented antenna is composed of a square‐loop feeding structure, four L‐shaped parasitic patches with L‐shaped slots, four parasitic square patches, and a corner‐truncated square patch. At first, a SP square‐loop is designed as a feeding structure. Then, four L‐shaped parasitic patches with L‐shaped slots are utilized to generate one CP mode by a capacitive coupled way. At last, four parasitic square patches and a corner‐truncated square patch are together placed above the SP feeding structure to broaden the circularly polarized bandwidth (CPBW). The presented antenna has a wide 3‐dB axial ratio bandwidth (ARBW) of 16.7% (5.4 GHz, 4.95‐5.85 GHz), and a wide 10‐dB return loss bandwidth of 25.5% (5.5 GHz, 4.8‐6.2 GHz). The proposed antenna features compact structure and broad 3‐AR bandwidth which could completely cover the WLAN (5.725‐5.85GHz) band. Therefore, the proposed antenna is suitable for circular polarization applications in C band.     

A new broadband circularly polarized square‐slot antenna with low axial ratios

A new broadband circularly polarized (CP) square‐slot antenna with low axial ratios is proposed in this article. The antenna is comprised of an L‐shaped microstrip line with tapered section and a square‐slot ground plane with some stubs and slots, which are utilized as perturbations for the desirable antenna performance. By loading stubs and slots in the square‐slot ground plane, the 2‐dB axial ratio bandwidth (ARBW) and 10‐dB return loss bandwidth for the presented antenna can be markedly improved. The measured results show that its 2‐dB ARBW is 4.2 GHz (54.2% from 5.65 GHz to 9.85 GHz) and its 10‐dB return loss bandwidth is about 8.9 GHz (92.7% from 5.15 GHz to 14.05 GHz). The proposed antenna features compact structure and broad 2‐AR bandwidth which could completely cover the WLAN (5.725‐5.85 GHz) band. Therefore, the proposed antenna is suitable for circular polarization applications in C band.     

A miniaturized ultra‐wideband planar monopole antenna with L‐shaped ground plane stubs

This article presents a miniaturized ultra‐wideband planar monopole antenna with an oval radiator. The proposed antenna is fed by a coplanar waveguide (CPW), and two L‐shaped stubs are extended from the ground plane of the CPW. This presented antenna is able to produce resonances in the lower frequency band and realize better impedance matching performance in the middle and higher frequency bands with the aid of the L‐shaped stubs. The antenna was built and tested. The total size of the proposed antenna is only 26 × 20 × 1.6 mm³. Its measured –10 dB impedance bandwidth is 10.1 GHz (3.1‐13.2 GHz). The measured far‐field radiation patterns are stable in the whole operating frequency band.     

Compact dual‐band ring dielectric resonator antenna with moon‐shaped defected ground structure for WiMAX/WLAN applications

In this article, compact ring‐shaped dielectric resonator antenna (DRA) along with moon‐shaped defected ground structure (DGS) was studied. The proposed antenna was fed by microstrip line shifted from center position, which excited TE_01δ mode in ring DRA. Moon‐shaped DGS was acting as a radiator and also reduced the size of proposed antenna by an amount of 14.87% (lower frequency band) and 48.77% (upper frequency band). The proposed antenna was designed to resonate at two different frequencies namely 2.24 and 5.82 GHz with a fractional bandwidth of 30.17% and 22.14%, respectively. Based on optimized design parameters, archetype of antenna structure has been constructed and measured successfully, which shows good agreement with simulated ones. The proposed antenna design was suitable for WLAN (2.4/5.2/5.8 GHz); WiMAX (2.5/5.5 GHz); AMSAT (5.6/5.8 GHz); and WAVE (5.9 GHz) bands. © 2016 Wiley Periodicals, Inc. Int J RF and Microwave CAE 26:503–511, 2016.     

Coplanar waveguide‐fed electrically small dual‐polarized short‐ended zeroth‐order resonating antenna using Ω‐shaped capacitor and single‐split ring resonator for GPS/WiMAX/WLAN/C‐band applications

This work explains the design and analysis of a triple‐band electrically small (ka = 0.56 < 1) zeroth‐order resonating (ZOR) antenna with wideband circular polarization (CP) characteristics. The antenna compactness is obtained due to ZOR frequency of composite right/left‐handed (CRLH) transmission line (TL) and wideband CP radiation are achieved due to the introduction of single‐split ring resonator and asymmetric coplanar waveguide fed ground plane. The proposed antenna obtains an overall electrical size including the ground plane of 0.124 λ₀ × 0.131 λ₀ × 0.005 λ₀ at 1.58 GHz and physical dimension of 23.7 × 25 × 1 mm³ are achieved. The antenna provides a size reduction of 44.95% compared to a conventional monopole antenna. The novelty behind the ohm‐shaped capacitor is the generation of extra miniaturization with better antenna compactness. The antenna provides dual‐polarized radiation pattern with linear polarization radiation at 1.58 and 3.54 GHz, wideband CP radiation at 5.8 GHz. The antenna measured results shows good impedance bandwidth of 5%, 6.21%, and 57.5% for the three bands centered at 1.58, 3.54, and 5.8 GHz with a wider axial ratio bandwidth (ARBW) of 25.47% is obtained in the third band. The antenna provides a higher level of compactness, wider ARBW, good radiation efficiency, and wider S₁₁ bandwidth. Hence, the proposed antenna is suitable for use in GPS L1 band (1.565‐1.585 GHz), WiMAX 3.5 GHz (3.4‐3.8 GHz) GHz, WLAN 5.2/5.8 GHz (5.15‐5.825 GHz), and C‐band (4‐8 GHz) wireless application systems.     

Dual‐band reconfigurable circularly polarized monopole antenna

A microstrip antenna with dual‐band reconfigurable circular polarization (CP) characteristics in Wireless Local Area Network (WLAN) and Worldwide Interoperability for Microwave Access (WiMAX) bands is presented in this article. The proposed antenna has a symmetrical U‐shaped slot with PIN diodes on the ground plane. The slotted ground generates a resonant mode for broad impedance‐band width, and excites contrary CP state at 2.45 GHz for WLAN and 3.4 GHz for WiMAX, respectively. Because switching the states of PIN diodes on the slot can redirect the current path, the CP state of the proposed antenna can be simply switched between the right‐handed CP and left‐handed CP. The proposed antenna has a low profile and a simple structure. Measured results of the fabricated antenna prototype are carried out to verify the simulation analysis. © 2014 Wiley Periodicals, Inc. Int J RF and Microwave CAE 25:109–114, 2015.     

Compact frequency reconfigurable triple band notched monopole antenna for ultrawideband applications

A compact ultra‐wideband (UWB) reconfigurable microstrip fed monopole antenna having size of 0.22 λ₀ × 0.28 λ₀ × 0.005 λ₀ with switchable frequency bands is presented. Triple band notched characteristics are achieved by inserting two stubs at top of radiator and one slot in between the radiator and microstrip feed line. Proposed antenna achieves reconfigurability with three PIN diodes at strategic positions to obtain eight different operational modes. In one of the operational modes, antenna operates in the entire UWB (3‐14 GHz) with fractional bandwidth of 127.5%. Two stubs are used to notch two frequency bands worldwide interoperability for microwave access (3.3‐3.6 GHz/WiMAX) and C‐band (3.7‐4.2 GHz). T‐shaped slot is also inserted to notch wireless local area network (5.725‐5.825 GHz/WLAN) frequency band. Proper biasing of PIN diodes is done by using suitable chip inductors and capacitors. Proposed antenna exhibits stable radiation patterns with average gain of around 3 dBi. Simulation and measurement results are in good agreement. Proposed antenna is suitable for on‐demand band rejection of parasitic bands coexisting in UWB.     

Compact UWB flexible elliptical CPW‐fed antenna with triple notch bands for wireless communications

A coplanar waveguide (CPW)‐fed flexible elliptical antenna with triple band notched characteristics is presented in this article. The designed antenna consists of an elliptical patch and slots incorporated CPW feed line to cover the bandwidth requirements for ultra‐wideband (UWB) applications. The designed UWB antenna has a fractional bandwidth of about 166.19% (1.20‐13 GHz) with a center frequency of 7.1 GHz in simulation and about 170.10% (1.05‐13 GHz) with a center frequency of 7.025 GHz in measurement. The overall dimension of the proposed flexible antenna is 45 × 35 × 0.6 mm³. The triple notched bands are realized by designing with circular shaped split‐ring‐resonators (SRRs) and defected ground structure (DGS). According to the measurement, first notched band (2.0? 2.70 GHz) is generated for rejecting 2.4 GHz WLAN by introducing a single circular ST‐SRR on the radiating patch. The second notch (3.45‐3.80 GHz) is obtained by embedding another circular ST‐SRR on the patch to mitigate the interference of 3.5 GHz Wi‐MAX system. Finally, due to presence of DGS, third notch (5.15‐6.20 GHz) is produced which suppresses the interference from 5.5 GHz Wi‐MAX and 5.2/5.8 GHz WLAN systems. The proposed antenna offers excellent performance in different flexible conditions that confirm its applicability on curved surfaces for UWB systems.