Synthesis of a novel intumescent flame retardant and its flame retardancy in polypropylene

Microencapsulated ammonium polyphosphate (GMFAPP) is prepared by in situ polymerization method with a shell of poly(ethylene glycol) modified melamine-formaldehyde resin. Due to the presence of shell, GMFAPP shows less size, higher water resistance and flame retardancy in polypropylene (PP) compared with ammonium polyphosphate (APP). The flame retardant action of GMFAPP and APP in PP are studied using LOI, UL-94 and cone calorimeter, and their thermal stability is evaluated by thermogravimetric apparatus. The limiting oxygen index (LOI) value of the PP/GMFAPP at the same loading is higher than the value of PP/APP. UL-94 ratings of PP/GMFAPP can reach V-0 at 30 wt% loading. The water resistant properties of the PP composites are studied, and the results of the composites containing with APP and GMFAPP are compared. The cone results put forward that GMFAPP is an effective flame retardant in PP compared with APP. Moreover, the thermal oxidative behavior of GMFAPP is evaluated by dynamic FTIR to study its flame retardant mechanism in PP.     

Flame retardancy of unsaturated polyester composites with modified ammonium polyphosphate,montmorillonite, and zinc borate

Ammonium polyphosphate (APP) was modified using a new method, where the resulting modified APP (MAPP) was obtained by mixing APP with unsaturated polyester resin (UPR). MAPP was more effective in improving the flame retardancy of UPR than APP which was due to the improved dispersion of MAPP in UPR composite. Then, the UPR composites were prepared based on dimethyl methylphosphonate, MAPP, montmorillonite, and zinc borate. Finally, the flame-retardant and mechanical properties of the UPR composites were analyzed using the limited oxygen index (LOI), thermogravimetric analysis, UL-94 vertical burning test, scanning electron microscopy, cone calorimetry, mechanical tests, and viscosity measurements. The LOI and UL-94 tests showed that the flame-retardant properties clearly improved with the addition of fillers in the UPR composites compared to pristine UPR. The synergistic effect of Si- and P-containing flame retardants in this composite resulted in the LOI value increasing from 18.9 to 31.3% and achieved the UL-94 V-0 rating. Moreover, the heat release rate was lower than the pristine UPR. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47180.     

Vinyl polysiloxane microencapsulated ammonium polyphosphate and its application in flame retardant polypropylene

Vinyl polysiloxane microencapsulated ammonium polyphosphate (MAPP) was prepared by a sol-gel method using vinyltrimethoxysilane as a precursor to improve its thermal stability and hydrophobicity. The MAPP was characterized by Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), energy dispersive spectrometer (EDS) and thermogravimetric analyzer (TGA). The results showed that ammonium polyphosphate (APP) was successfully coated with vinyl polysiloxane. MAPP and pentaerythritol (PER) were used together to improve the flame retardancy of polypropylene (PP). The flame retardant properties of PP composites were investigated by limiting oxygen index (LOI), UL-94 test, TGA and SEM. When the MAPP was added as a flame retardant, with PER as a char forming agent, the LOI of PP/MAPP/PER composites was 33.1%, and it reached the UL-94 V-0 level. The results also demonstrated that the flame retardant properties of PP/MAPP/PER composites were better than those of PP/APP/PER composites at the same loading. Moreover, the addition of flame retardant and carbon forming agent could promote the crystallization behavior of PP.     

Influence of the pentaerythritol phosphate melamine salt content on the combustion and thermal decomposition process of intumescent flame‐retardant ethylene–vinyl acetate copolymer composites

Pentaerythritol phosphate melamine salt (PPMS) as a single‐molecule intumescent fire retardant was synthesized and characterized. The influence of the PPMS content on the combustion and thermal decomposition processes of intumescent‐flame‐retardant (IFR) ethylene–vinyl acetate copolymer (EVA) composites was studied by limiting oxygen index (LOI) measurement, UL 94 rating testing, cone calorimetry, thermogravimetric analysis, and scanning electron microscopy. The LOI and UL 94 rating results illustrate that PPMS used in EVA improved the flame retardancy of the EVA composites. The cone calorimetry test results show that the addition of PPMS significantly decreased the heat‐release rate, total heat release, and smoke‐production rate and enhanced the residual char fire performance of the EVA composites. The IFR–EVA3 composite showed the lowest heat‐release and smoke‐production rates and the highest char residue; this means that the IFR–EVA3 composite had the best flame retardancy. The thermogravimetry results show that the IFR–EVA composites had more residual char than pure EVA; the char residue yield increased with increasing PPMS content. The analysis results for the char residue structures also illustrated that the addition of PPMS into the EVA resin helped to enhance the fire properties of the char layer and improve the flame retardancy of the EVA composites. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42148.     

Synergistic flame retardant effects of ammonium polyphosphate in ethylene‐vinyl acetate/layered double hydroxides composites

Mg–Al–Fe ternary layered double hydroxides (LDH) were synthesized based on bayer red mud by calcination‐rehydration method, and characterized using X‐ray diffraction and thermogravimetric analysis (TGA). The synergistic flame retardant effects of ammonium polyphosphate (APP) with LDH in ethylene‐vinyl acetate (EVA) composites were studied using limiting oxygen index (LOI), UL 94 test, cone calorimeter test (CCT), and smoke density test (SDT). The thermal degradation behavior of EVA/LDH/APP composites was examined by thermal gravimetric analysis‐fourier transform infrared spectrometry (TG‐FTIR). The results showed that LOI values decreased by incorporation of APP together with LDH; and, a suitable amount of APP in EVA/LDH composites can apparently improve UL 94 rating. The CCT results indicated that heat release rate (HRR) of the EVA/LDH/APP composites with APP decreased in comparison with that of the EVA/LDH composites. The SDT results showed that APP was helpful to suppress smoke. The TG‐FTIR data showed that the composites with APP had a higher thermal stability than the EVA/LDH composites at high temperature. POLYM. ENG. SCI., 54:766–776, 2014. © 2013 Society of Plastics Engineers     

Synergistic effects of molybdenum disulfide on a novel intumescent flame retardant polyformaldehyde system

A novel intumescent flame retardant (IFR) composed of ammonium polyphosphate (APP), benzoxazine containing trialkoxysilane (BA-a-Si) and melamine (ME), is compounded with different specifications of MoS₂ as synergist to flame retard polyformaldehyde (POM). The flame retardancy and mechanism of the composites are analyzed by limiting oxygen index (LOI), vertical combustion (UL-94) and cone calorimeter. At the same time, the mechanical properties and lubricating properties are tested by electromechanical testing machine and wear testing machine. The experimental results show that MoS₂ has a good synergistic effect with IFR, and the smaller the average particle size of MoS₂ is, it seems to be more beneficial to improve the flame retardancy of POM composites. Only a small amount of MoS₂ (0.8 wt%) is needed to synergize with IFR, the flame retardant POM composite (FR-POM) can achieve UL-94 (3.2 mm) V-0 rating, LOI of 62.5%, and heat release rate reduction of 25.3%, total smoke release decreased by 29.5%. In addition, from the mechanical properties analysis, it is found that the microscale MoS₂(M2) can better improve the bending and tensile properties of the FR-POM composites, while the nanoscale MoS₂(N80) is more helpful to improve the lubricating properties.     

Preparation of expandable graphite with silicate assistant intercalation and its effect on flame retardancy of ethylene vinyl acetate composite

A halogen‐free intumescent flame retardant expandable graphite composite (EG), with an initial expansion temperature of 202°C and expansion volume of 517 mL g⁻¹, was successfully prepared via a facile two‐step intercalation method, i.e. using KMnO₄ as oxidant and H₂SO₄, Na₂SiO₃·9H₂O as intercalators. The prepared EG flame retardant was characterized by field emission scanning electron microscope, X‐ray diffraction spectroscopy, energy dispersive spectroscopy and Fourier transform infrared spectroscopy. Furthermore, flame retardancy and thermal property of various ethylene vinyl acetate copolymer (EVA) composites, including EVA/EG and EVA/EG/APP (ammonium polyphosphate) specimens, were studied through limiting oxygen index instrument (LOI), vertical combustion UL‐94 rating, thermal gravimetric and differential thermal analysis. The results indicate that the EVA/EG and EVA/EG/APP composites exhibit a better flame retardancy. Addition of EG at a mass fraction of 30% leads LOI of 70EVA/30EG composite improved to 28.7%. Even more, the synergistic effect between EG and APP improves the LOI of 70EVA/10APP /20EG composite to 30.7%. This synergistic efficiency is attributed to the formation of compact and stable layer‐structure, and the prepared EG can make EVA composite reach the UL‐94 level of V‐0. POLYM. COMPOS., 36:1407–1416, 2015. © 2014 Society of Plastics Engineers     

Epoxy resin/phosphorus‐based microcapsules: Their synergistic effect on flame retardation properties of high‐density polyethylene/graphene nanoplatelets composites

Two types of microcapsule flame retardants are prepared by coating ammonium polyphosphate (APP) and aluminum diethylphosphinate (ADP) with epoxy resin (EP) as the shell via in situ polymerization, and blended with high density polyethylene (HDPE)/graphene nanoplatelets (GNPs) composites to obtain flame‐retardant HDPE materials. Fourier transform infrared spectroscopy, scanning electron microscopy (SEM), and water contact angle results confirm the formation of core–shell structures of EP@APP and EP@ADP. The limiting oxygen index (LOI), vertical burning test (UL‐94), cone calorimetry, and Raman spectroscopy are employed to characterize the HDPE/GNPs composites filled with EP@APP and EP@ADP core–shell materials. A UL94 V‐0 level and LOI of 34% is achieved, and the two flame retardants incorporated in the HDPE/GNPs composite at 20 wt % in total play a synergistic effect in the flame retardancy of the composite at a mass ratio of EP@ADP:EP@APP = 2:1. According to the cone‐calorimetric data, the compounding composites present much lower peak heat release rate (300 kW/m²) and total heat release (99.4 MJ/m²) than those of pure HDPE. Raman spectroscopic analysis of the composites after combustion reveals that the degree of graphitization of the residual char can reach 2.31, indicating the remarkable flame retarding property of the composites. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46662.     

A novel intumescent flame‐retardant system for flame‐retarded LLDPE/EVA composites

A new intumescent flame retardant (IFR) system consisting of ammonium polyphosphate (APP) and charing‐foaming agent (CFA) and a little organic montmorillonite (OMMT) was used in low‐density polyethylene (LLDPE)/ethylene‐vinyl acetate (EVA) composite. According to limiting oxygen index (LOI) value and UL‐94 rating obtained from this work, the reasonable mass ratio of APP to CFA was 3 : 1, and OMMT could obviously enhance the flame retardancy of the composites. Cone calorimeter (CONE) and thermogravimetric analysis (TGA) were applied to evaluate the burning behavior and thermal stability of IFR‐LLDPE/EVA (LLDPE/EVA) composites. The results of cone calorimeter showed that heat release rate peak (HRR‐peak) and smoke production rate peak (SPR‐peak) and time to ignition (TTI) of IFR‐LLDPE/EVA composites decreased clearly compared with the pure blend. TGA data showed that IFR could enhance the thermal stability of the composites at high temperature and effectively increase the char residue. The morphological structures of the composites observed by scanning electron microscopy (SEM) and X‐ray diffraction (XRD) demonstrated that OMMT could well disperse in the composites without exfoliation, and obviously improve the compatibility of components of IFR in LLDPE/EVA blend. The morphological structures of char layer obtained from Cone indicated that OMMT make the char layer structure be more homogenous and more stable. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Butyltriphenylphosphine-based chelate borates influenced on flame retardancy of polystyrene composite containing self-expanded intumescent flame retardants

The polystyrene (PS) composite containing self-expanded intumescent flame retardant (polyphosphate ammonium and expandable graphite) was blended with three butyltriphenylphosphine-based chelate borates, respectively, to evaluate their effect on flame retardancy. The chemical structure of as-prepared three chelate borates was confirmed by nuclear magnetic resonance (NMR) and Fourier transform infrared spectrum (FTIR). The flame retardancy of various PS composites was evaluated by vertical burning test (UL-94), limited oxygen index (LOI), and cone calorimeter (CC). Flammability and combustion results suggested that one of chelate borates, named [BTP][BMB], made PS composite (PS4) obtain V-0 rating, 27.0 ± 0.3% LOI value, and reduction on heat release and smoke production with 17 wt% total flame retardants loading. The combustion residue was analyzed by scanning electron microscope and FTIR, and the pyrolysis gaseous products were investigated by TG-FTIR technique. Besides, complex viscosity of PS composites composed of various chelate borates from a rheology instrument indicated that the improvements of flame retardancy of PS composites depended on the temperature of construction of crosslinked network by expandable graphite, which the chelate borates showed distinctive influence. Accordingly, the flame-retarding mechanism about fast response to flame has been proposed.     

MAPP阻燃EVA泡沫复合材料的制备及其性能

利用乙二胺（EDA）对聚磷酸铵（APP）进行改性,得到聚磷酸铵衍生物（MAPP）。采用MAPP、石墨（EG）和木粉（MF）复配的方式得到膨胀性阻燃剂,并与EVA复合得到泡沫复合材料。采用FT-IR、XRD、¹H NMR表征接枝效果,利用LOI和UL-94测试仪、锥形量热仪（CONE）、TG及SEM等分析材料的阻燃性能、残炭的形态及力学性能。结果表明：EDA已成功接枝在APP上,所形成的MAPP能够有效提高复合发泡材料的阻燃性能、减少热释放量;MAPP/EVA复合发泡材料的残炭层更加致密和完整,能够有效起到隔热、隔氧的作用;并且MAPP能够提高材料的耐水性及与EVA基体的相容性。当MAPP添加量为20%时,体系的LOI可达27.6%,且UL-94为V-0级别,拉伸强度、断裂伸长率分别可达1.282 MPa、236.40%,阻燃材料的综合性能达到最优。     

有机蒙脱土对EVA/IFR复合材料阻燃性能的影响

以聚磷酸铵（APP）和季戊四醇（PER）为膨胀型阻燃剂（IFR）制备了含有蒙脱土的无卤阻燃乙烯 醋酸乙烯共聚物（EVA）复合材料。通过极限氧指数、热失重分析、锥形量热分析等手段研究了有机蒙脱土(OMMT)的存在对EVA阻燃性能和热降解性能的影响,并通过扫描电子显微镜对复合材料残炭表面形貌进行了观察和分析。结果表明,加入有机蒙脱土可以促进复合材料成炭、改善炭层质量,从而起到了良好的隔热、抑烟作用;OMMT的最佳添加量为3份（质量份数,下同）,复合材料的极限氧指数可达到29.4 %,垂直燃烧可达V 0级。     

“三源一体”壳核型阻燃剂的制备及其在聚乳酸中的应用

以聚磷酸铵（APP）为核,壳聚糖（CS）、氯化铁和埃洛石（HNT）为壳,以水为溶剂,通过自组装的方式制备了“三源一体”壳核型阻燃剂（APP@CS@HNT和APP@CS⁃Fe@HNT,分别简写为ACH和ACFH）,并将其用于提升聚乳酸（PLA）的阻燃性能。通过扫描电子显微镜、热重分析仪等对ACH和ACFH的组成及结构进行了分析,然后对PLA的阻燃性能进行表征。结果表明,PLA/15 %ACFH（质量分数,下同）的阻燃性能优于纯PLA和PLA/15 %ACH,PLA/15 %ACFH的极限氧指数（LOI）最高,提升到29.5 %,且UL 94达到V⁃0级;相较于纯PLA,PLA/15 %ACFH的最大热释放速率（PHRR）和总热释放量（THR）分别下降了33.5 %和22.0 %,残炭量提高了12.5 %;ACFH主要发挥凝聚相阻燃效果,燃烧过程能促进PLA基体形成大量连续、致密的炭层,起到抑制氧气和热量扩散的阻隔作用。     

Synergistic flame retardant effects of Fe-OMMT with LDH in EVA/LDH composites

Abstract

The synergistic effects of Fe organic modified montmorillonite (Fe-OMMT) with layered double hydroxides (LDHs) in ethylene vinyl acetate copolymer/LDH (EVA/LDH) composites have been studied using thermal analysis [thermogravimetric analysis (TGA)], limiting oxygen index (LOI), UL-94 test and cone calorimeter test (CCT). The results showed that the addition of a given amount of Fe-OMMT apparently increased the LOI value and the rating in the UL-94 test. The results from the LOI and UL-94 tests show that Fe-OMMT can act as flame retardant synergistic agents in EVA/LDH composites. The CCT data indicated that the addition of Fe-OMMT in the EVA/LDH system can greatly reduce the heat release rate. The TGA data show that Fe-OMMT, as an excellent flame retardant synergist of LDH, cannot increase the thermal degradation temperature and the charred residues.     

卡拉胶包覆APP/MnO2增强水性环氧树脂阻燃抑烟性能

用反相乳液法，以卡拉胶（KC）为壳材，聚磷酸铵（APP）和二氧化锰（MnO2）为芯材，制备了KC包覆APP/MnO2阻燃剂（KC-FR）。通过FTIR、 XRD、 SEM和 EDS对KC-FR进行了表征。结果表明：卡拉胶已成功包覆APP和MnO2，合成的样品具有微胶囊结构。将KC-FR应用于水性环氧树脂（EP）中，考察KC、APP、MnO2 三者质量比对EP阻燃、抑烟性能的影响。用极限氧指数（LOI）、垂直燃烧（UL-94）和锥形量热（CCT）测试了涂层的阻燃、抑烟性能。结果发现，当KC/APP/MnO2的质量比为2∶1∶1，并且在EP中添加量为20%时，制备的阻燃涂层EP2的LOI达到29.1%，UL-94达到V-0级，表现出较好的阻燃性能。EP2相比于其它涂层热释放峰值（pHRR）、热释放总量（THR）和烟释放总量（TSP）最低，相比于EP0分别下降了42%、37%和46%，表现出较好的抑烟性能。另外，热重分析（TGA）测试结果显示EP2在800℃残炭量（W800）为33%，表明KC-FR具有促进EP成炭的功能。通过SEM对残炭表面分析发现，EP2表面炭层更加致密，这表明KC-FR对促进形成稳定并且致密的炭层起到至关重要的作用。     

Synergistic effects of hydroxy silicone oil on intumescent flame retardant polypropylene system

The effects of hydroxy silicone oil as a synergistic agent on the flame retardancy of intumescent flame retardant polypropylene composites (IFR-PP) were studied, and the IFR system mainly consisted of the ammonium polyphosphate (APP), melamine (MEL) and pentaerythritol (PER). The UL 94 rating, thermogravimetric analysis (TGA), cone calorimeter (CONE) and digital photograph were used to evaluate the synergistic effects of hydroxy silicone oil (HSO). It has been found that the PP composite containing only APP, MEL and PER does not show good flame retardancy at 30% additive level. The cone calorimeter results show that the heat release rate, mass loss rate, mass, total heat release, carbon monoxide and carbon dioxide of PP/APP/MEL/PER/HSO composites decrease in comparison with the PP/APP/MEL/PER composite. The digital photographs demonstrated that HSO could promote to form the homogenous and compact intumescent char layer. Thus, a suitable amount of HSO plays a synergistic effect in the flame retardancy.     

TPS/EVA泡沫复合材料的制备及其阻燃与力学性能

以热塑性淀粉(TPS)为成炭剂与聚磷酸铵(APP)、可膨胀石墨(EG)复配组成膨胀型阻燃剂,通过熔融密炼、开炼塑化、硫化发泡制备了热塑性淀粉/乙烯-醋酸乙烯酯共聚物(TPS/EVA)泡沫复合材料,探讨了TPS用量对泡沫复合材料阻燃性能、力学性能的影响。结果表明,TPS的加入显著提高了TPS/EVA泡沫复合材料阻燃性能,可起到良好的成炭作用;TPS/EVA泡沫复合材料的拉伸强度、断裂伸长率以及撕裂强度随着TPS用量的增加呈现先增大后减小的趋势,相对密度则是小幅度上升。当TPS用量为6%时,TPS/EVA泡沫复合材料综合性能最好,其LOI可达26.5%且UL-94为V-0级,拉伸强度、断裂伸长率、撕裂强度以及相对密度可达2.395 MPa、177.48%、10.59 N·mm^-1、0.21452。     

Flame Retardant Synergism of Hydroxy Silicone Oil and Al(OH)3 in EVA Composites

A synergistic effect on flame retardancy was found when hydroxy silicone oil (HSO) was incorporated into ethylene vinyl acetate/aluminum hydroxide (EVA/ATH) composite. The fire performance of EVA and EVA composites was studied by using limiting oxygen index (LOI), UL 94, and cone calorimeter test (CCT). Compared with the EVA/ATH binary composite, the LOI values of the EVA/ATH/HSO ternary composites at the same additive loading are all decreased. The CCT data indicated that the addition of HSO in EVA/ATH system not only reduces the heat release rate, but also prolonged the ignition time of the composite. Thermogravimetric analysis revealed that ATH accelerated the loss of acetic acid, but hydroxy silicone oil assisted to reduce ATH's accelerating effect.     

Synthesis of a novel char-forming agent (PEIC): Improvement in flame retardancy,thermal stability,and smoke suppression for intumescent flame-retardant polypropylene composites

A novel char-forming agent named PEIC was designed and synthesized combining pentaerythritol octahydrogen tetraphosphate (PEPA) and tris(2-hydroxyethyl) isocyanurate. PEIC was combined with the silica-gel-microencapsulated ammonium polyphosphate (OS-MCAPP), preparing intumescent flame-retardant polypropylene (PP) composites. The results of the limiting oxygen index (LOI) show that the composite containing 30 wt % IFR with OS-MCAPP:PEIC = 2:1 presents the optimal LOI of 32.7%. Meanwhile, the cone calorimeter tests show that its peak heat release rate is 432 kW m⁻², which decreases by 62.1% compared with that of pure PP, showing a high-efficient flame retardancy. The exhibited UL-94 V-0 rating for all the composites indicates that the IFR composed of PEIC and OS-MCAPP has high-efficient flame retardancy in PP. The analysis of residue char reveals that PEIC could improve the quality of char in compactness, intumescentia, and the degree of graphitization. Further, the effect of IFR on the mechanical properties of PP composites was also evaluated and discussed. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48296.     

Flame retardant and antibacterial properties of PLA/PHMG-P/APP composites

Poly(lactic acid) (PLA) has evolved into a commodity polymer with numerous applications. However, its high flammability limits its viability as a perfect alternative to petrochemical engineering plastics. In this study, PLA was modified using polyhexamethyleneguanidine phosphate (PHMG-P) and ammonium polyphosphate (APP). The flame retardant performance of PLA/PHMG-P/APP was investigated based on the limiting oxygen index (LOI), vertical burning test (UL-94), thermogravimetric analysis (TGA), cone calorimetry (CC), scanning electron microscopy (SEM), Fourier-transform infrared spectroscopy (FTIR), and Raman Spectrometry. Qualitative and quantitative methods were used to determine the antibacterial properties of PLA composites. The LOI of PLA-10% (P:A = 1:4) was 31.7% and was rated V-0 in the UL-94 V-0 test. The antibacterial properties of the composites reflected the antibacterial effects of PLA-10% (P: A = 1:4) against Escherichia coli and Staphylococcus aureus, with the antibacterial rates reaching 93.41% and 93.26%, respectively. PHMG-P and APP had a synergistic flame-retardant effect and improved the flame retardancy of PLA while exhibiting excellent antibacterial properties.