Silver nanoparticles dispersed in polyaniline matrixes coated on titanium substrate as a novel electrode for electro-oxidation of hydrazine

Silver nanoparticles dispersed in polyaniline matrixes coated on titanium substrate, as a novel electrode, was easily synthesized by electro-polymerization of aniline on titanium and then electrodeposited silver nanoparticles on PAni electrode. The electrochemical behavior and electro-catalytic activity of silver nanoparticles/PAni/Ti electrodes were characterized by cyclic voltammetry. The morphology of silver nanoparticles on PAni/Ti electrodes were characterized by scanning electron microscopy and energy-dispersive X-ray techniques, respectively. Results indicated that silver nanoparticles with a diameter of about 40–70 nm were homogeneously dispersed on the surface of polyaniline film. The silver nanoparticles/PAni/Ti electrodes were examined for electro-catalytic activity toward oxidation of hydrazine. The results show that these modified electrodes are highly active for electro-catalytic oxidation of hydrazine.     

The effect of electrode films on the electrical resistance of thin tin films

The variation in resistance of thin films of tin deposited onto glass substrates was studied using pre-deposited gold, silver, aluminum and tin electrodes. The percentage variation in resistance of the tin films was found to be different for the different electrode materials. The structural features of the tin-electrode film junctions were investigated using optical and scanning electron microscopes. The difference between the variations in resistance with time for different electrode films is explained on the basis of interdiffusion, alloy formation and oxidation at the electrode film junctions.     

Application of titanium oxide nanotube films containing gold nanoparticles for the electroanalytical determination of ascorbic acid

Au/TiO₂/Ti electrodes have been prepared by galvanic deposition of gold particles on TiO₂ nanotube substrates. Titanium oxide nanotubes are fabricated by anodizing titanium foil in a Dimethyl Sulfoxide electrolyte containing fluoride. The scanning electron microscopy results indicated that gold particles are homogeneously deposited on the surface of TiO₂ nanotubes. The TiO₂ layers consist of individual tubes of about 40-80 nm diameters. The electro-catalytic behavior of Au/TiO₂/Ti and flat gold electrodes for the ascorbic acid electro-oxidation was studied by cyclic voltammetry. The results showed that the flat gold electrode is not suitable for the oxidation of ascorbic acid. However, the Au/TiO₂/Ti electrodes are shown to possess catalytic activity toward the oxidation reaction. Catalytic oxidation peak current showed a linear dependence on the ascorbic acid concentration and a linear calibration curve is obtained in the concentration range of 1-5 mM of ascorbic acid. Also, determination of ascorbic acid in real samples was evaluated. The obtained results were found to be satisfactory. Finally the effects of interference on the detection of ascorbic acid were investigated.     

Synthesis, characterization and electrocatalytic activity of fused gold nanoparticles

This paper describes the synthesis of fused spherical gold nanoparticles (AuNPs) and their electrocatalytic activity towards the oxidation of hydroxylamine (HA). Fused AuNPs were prepared by one-pot synthesis using 2-mercapto-4-methyl-5-thiazoleacetic acid (TAA) as a stabilizing agent and sodium borohydride (NaBH4) as a reducing agent. The HR-TEM images showed that two individual AuNP were joined via on its surface with a size range of approximately 7 nm and a length of approximately 15 nm diameter. The pH studies showed that the synthesized fused AuNPs was stable at pH > 8. This indicated that the carboxylate ion present on the TAA molecule stabilized the AuNPs from aggregation. Further, the fused AuNPs were utilized for the electrocatalytic oxidation of hydroxylamine (HA) after immobilized them on (3-mercaptopropyl)-trimethoxysilane (MPTS) sol-gel film modified Au electrode. The AuNPs modified electrode showed an excellent electrocatalytic activity towards the oxidation of HA in 0.2 M phosphate buffer solution (pH 7.2) by shifting its oxidation potential to 100 mV less positive and enhancing its oxidation current for more than three times when compared to bare Au electrode. Further, it was found that the fused AuNPs modified electrode showed greater electrocatalytic activity towards HA than the spherical AuNPs modified electrodes.     

Peanut skin extract mediated synthesis of gold nanoparticles,silver nanoparticles and gold–silver bionanocomposites for electrochemical Sudan IV sensing

Sustainable methods are needed for rapid and efficient detection of environmental and food pollutants. The Sudan group of dyes has been used extensively as adulterants in food and also are found to be polluting the soil and water bodies. There have been several methods for detection of Sudan dyes, but most of them are not practical enough for common use. In this study, the electrochemical detection efficiency and stability of gold nanoparticle (AuNPs), silver NPs and Au–Ag bionanocomposites, synthesised by peanut skin extract, modified glassy carbon electrode has been investigated. The synthesised nanomaterial samples were characterised, for their quality and quantity, using ultra–visible spectroscopy, inductive coupled plasma mass spectrophotometer, Fourier transform infrared spectroscopy, energy‐dispersive X‐ray spectroscopy, high‐resolution transmission electron microscope and field emission scanning electron microscope. The nanomaterial hybrid electrodes showed great efficiency and stability in the detection of Sudan IV compared with the other previous electrodes. The peak current of the Sudan IV oxidation and reduction was found to be proportional to its concentration, in the range of 10–80 µM, with a detection limit of 4 µM. The hybrid electrodes showed 90% stability in detection for 20 cycles.Inspec keywords: gold, silver, nanoparticles, nanocomposites, biomedical materials, electrochemical sensors, dyes, nanofabrication, ultraviolet spectra, visible spectra, spectrophotometry, Fourier transform infrared spectra, X‐ray chemical analysis, transmission electron microscopy, scanning electron microscopy, field emission electron microscopyOther keywords: peanut skin extract mediated synthesis, gold nanoparticles, silver nanoparticles, gold–silver bionanocomposites, electrochemical Sudan IV sensing, electrochemical detection efficiency, modified glassy carbon electrode, ultra–visible spectroscopy, inductive coupled plasma mass spectrophotometer, Fourier transform infrared spectroscopy, energy‐dispersive X‐ray spectroscopy, high‐resolution transmission electron microscope, field emission scanning electron microscope, oxidation, reduction, detection limit, Au, Ag, Au‐Ag     

质子交换膜恒电位式氢气传感器

利用质子交换膜为电解质,碳纸和铂黑分别为电极的扩散层和催化层,制作了恒电位式氢气传感器;确定的最佳施加电位是１．５Ｖ;在氢气浓度为０．２％内,氢气氧化电流与氢气浓度成正比;通过在工作电极前面加设聚乙烯膜,增大氢气扩散阻力,可以将氢气氧化电流与氢气浓度之间的线性关系提高到氢气浓度为１．５％。     

Electrochemical fabrication of polyaniline films containing gold nanoparticles deposited on titanium electrode for electro-oxidation of ascorbic acid

Polyaniline films prepared on titanium were employed as substrate for the electrodeposition of gold. The modified electrode was used as anode for the electro-oxidation of ascorbic acid. The electrochemical behavior and electro-catalytic activity of Au/PAni/Ti electrode were characterized by cyclic voltammetry. The morphology of the polyaniline film and gold coating on PAni/Ti electrode were characterized by scanning electron microscopy (SEM) and energy-dispersive X-ray (EDX) techniques, respectively. Results indicated that gold nanoparticles were homogeneously dispersed on the surface of polyaniline film. The electro-oxidation of ascorbic acid is found to proceed more facile on Au/PAni/Ti electrode than on bare gold electrode. The irreversible oxidation current of ascorbic acid exhibits a linear dependence on the ascorbic acid concentration in the range of 1–5 mM.     

Nickel nano-particle modified nitrogen-doped amorphous hydrogenated diamond-like carbon film for glucose sensing

Electrochemical method has been employed in this work to modify nitrogen-doped hydrogen amorphous diamond-like carbon (N-DLC) film to fabricate nickel nano-particle-modified N-DLC electrodes. The electrochemical behavior of the nickel nano-particle-modified N-DLC electrodes has been characterized at the presence of glucose in electrolyte. Meanwhile, the N-DLC film structure and the morphology of metal nano-particles on the N-DLC surface have been investigated using micro-Raman spectroscopy and atomic force microscopy. The nickel nano-particle-modified N-DLC electrode exhibits a high catalytic activity and low background current. This result shows that the nickel nano-particle deposition on N-DLC surface could be a promising method to fabricate novel electrode materials for glucose sensing.     

Electrochemical surface plasmon resonance measurement based on gold nanohole array fabricated by nanoimprinting technique

In this paper, we describe our development of an electrochemical surface plasmon resonance (EC-SPR) measurement device based on a bottom-filled gold nanohole array. The polymer based gold nanohole array was fabricated with a UV nanoimprint technique and electron beam gold deposition. Direct reflection mode measurement was used to monitor the SPR dip in the reflection spectra. A cyclic voltammogram was also operated by using the standard three electrodes containing working electrode having a gold nanohole array and counter and reference electrodes. The gold nanohole array was modified with an osmium-poly(vinylpyridine)-wired horseradish peroxidase (Os-gel-HRP) film, and its redox state induced by the change in potential was monitored simultaneously. The redox state of the local film was obtained simply by scanning the sample substrate stage. The substrate modified with Os-gel-HRP film was incorporated in a microfluidic chip, and then the hydrogen peroxide was determined in terms of the redox change in the Os complex mediator from the slope of the SPR dip shift. The linear relation of hydrogen peroxide from 10 to 250 μM was successfully monitored, and a high conversion efficiency was realized.     

Steady-state voltammetry of hydroxide ion oxidation in aqueous solutions containing ammonia

An oxidation process observed in dilute aqueous solutions of ammonia was investigated under steady-state conditions with gold microelectrodes with radii in the range 2.5-30 microm. Over the ammonia concentration range 0.1-10 mM, a well-defined voltammetric wave was observed at approximately 1.4 V versus Ag/AgCl. It was attributed to the oxidation of hydroxide ions that arise from the dissociation of the weak base. The steady-state limiting current was found to depend on the concentration of supporting electrolyte, and in solution with low electrolyte, it was enhanced by migration contribution, as expected for a negatively charged species that oxidizes on a positively charged electrode. In addition, the steady-state limiting current was proportional to both the ammonia concentration and the electrode radius. The overall electrode process was analyzed in terms of a CE mechanism (homogeneous chemical reaction preceding the heterogeneous electron transfer) with a fast chemical reaction when measurements were carried out in solutions containing NH3 at < or = 5 mM and with electrodes having a radius of > or = 5 microm. This was ascertained by comparing experimental and theoretical data obtained by simulation. The formation of the soluble complex species Au(NH3)2+ was also considered as a possible alternative to explain the presence of the oxidation wave. This process however was ruled out, as the experimental data did not fit theoretical predictions in any of the conditions employed in the investigation. Instead, the direct oxidation of NH3, probably to N2O, was invoked to explain the anomalous currents found when the CE process was strongly kinetically hindered. Throughout this study, a parallel was made between the CE mechanism investigated here and that known to occur during the hydrogen evolution reaction from weak acids.     

Ethylene glycol oxidation on Pt and Pt-Ru nanoparticle decorated polythiophene/multiwalled carbon nanotube composites for fuel cell applications

A novel supporting material containing polythiophene (PTh) and multiwalled carbon nanotubes (MWCNTs) (PTh-CNTs) is prepared by in?situ polymerization of thiophene on carbon nanotubes using FeCl(3) as oxidizing agent under sonication. The prepared polythiophene/CNT composites are further decorated with Pt and Pt-Ru nanoparticles by chemical reduction of the corresponding metal salts using HCHO as reducing agent at pH = 11 (Pt/PTh-CNT and Pt-Ru/PTh-CNT). The fabricated composite films decorated with nanoparticles were investigated towards the electrochemical oxidation of ethylene glycol (EG). The presence of carbon nanotubes in conjugation with a conducting polymer produces a good catalytic effect, which might be due to the higher electrochemically accessible surface areas, electronic conductivity and easier charge-transfer at polymer/electrolyte interfaces, which allows higher dispersion of Pt and Pt-Ru nanoparticles. Such nanoparticle modified PTh-CNT electrodes exhibit better catalytic behavior towards ethylene glycol oxidation. Results show that Pt/PTh-CNT and Pt-Ru/PTh-CNT modified electrodes show enhanced electrocatalytic activity and stability towards the electro-oxidation of ethylene glycol than the Pt/PTh electrodes, which shows that the composite film is more promising for applications in fuel cells.     

Electrogenerated chemiluminescence. 66. The role of direct coreactant oxidation in the ruthenium tris(2,2')bipyridyl/tripropylamine system and the effect of halide ions on the emission intensity

We describe the electrogenerated chemiluminescence (ECL) processes of the Ru(bpy)3(2+) (bpy = 2,2'-bipyridyl)/ tripropylamine (TPrA) system at glassy carbon, platinum, and gold electrodes. The electrochemical behavior of TPrA on different electrode materials and its influence on the ECL process are demonstrated. At glassy carbon electrodes, the direct oxidation of TPrA began at approximately 0.6 V vs SCE and exhibited a broad irreversible anodic peak. Two ECL waves were observed, one in the potential region more negative than 1.0 V vs SCE and one at more positive potentials. The first ECL process apparently occurs without the electrogeneration of Ru(bpy)3(3+), in contrast to that of the second ECL wave. At Pt and Au electrodes, however, the formation of surface oxides significantly blocked the direct oxidation of TPrA. An ECL wave below 1.0 V did not appear at Pt and was very weak at gold. The ECL peaks at potentials of 1.1-1.2 V were also much weaker than those observed at the glassy carbon electrode. These results showed that the direct oxidation of TPrA played an important role in the ECL processes. Therefore, the enhancement of the TPrA oxidation current might lead to an increase in the ECL intensity. Small amounts of halide species were found to inhibit the growth of surface oxides on Pt and gold electrodes and led to an obvious increase of TPrA oxidation current. The anodic dissolution of gold in halide-containing solution was also important in activating the gold electrode surface. The electrochemical catalytic effect of bromide further promoted the oxidation of TPrA. A halide effect on ECL at Pt and Au electrodes was also evident. The most effective enhancement of ECL was observed at Au electrode in a bromide-containing solution. This effect was also found in an commercial flow-through instrument (IGEN) and provided a simple way to improve the detection sensitivity at low concentrations of Ru(bpy)3(2+).     

电沉积羟基磷灰石修饰电极上的葡萄糖传感器的研制

在铂电极上电沉积羟基磷灰石（HAp）-聚乙烯醇（PVA）复合涂层,并将葡萄糖氧化酶（GOD）固定在羟基磷灰石HAp-PVA-Nafion复合膜,构建了高灵敏度、高选择性的葡萄糖传感器。固定在此电极上的GOD在pH 7.0的磷酸缓冲液（PBS）中展现出一对可逆性好的氧化还原峰,此电极对葡萄糖的氧化有良好的催化作用随葡萄糖浓度,在恒电位-0.92 V（相对于饱和甘汞电极）时测量溶解氧还原电流,结果显示,羟基磷灰石和Nafion良好的协同作用增强了GOD的电化学活性,促进了GOD与电极表面之间的电子转移,提高了传感器的穗定性与灵敏度,还原电流的衰减在浓度0.04-0.52 mmol dm~（-3）范围内与葡萄糖的浓度呈线性关系     

Liquid / liquid ion-transfer processes at the dioctylphosphoric acid (N,N-didodecyl-N',N'-diethylphenylenediamine) / water (electrolyte) interface at graphite and mesoporous TiO2 substrates

Biphasic electrode systems are studied for the case of the oxidation of the water-insoluble liquid N,N-didodecyl-N',N'-diethylphenylenediamine (DDPD) neat and dissolved in bis(2-ethylhexyl) phosphate (HDOP) and immersed in aqueous electrolyte media. The oxidation process in the absence of HDOP is accompanied by transfer of the anion (perchlorate or phosphate) from the water into the organic phase. However, in the presence of HDOP, oxidation is accompanied by proton exchange instead. This electrochemically driven proton exchange process occurs over a wide pH range. Organic microdroplet deposits of DDPD in HDOP at basal plane pyrolytic graphite electrodes are studied by voltammetric techniques and compared in their behavior to organic microphase deposits in mesoporous TiO2 thin films. The mesoporous TiO2 thin film acts as a host for the organic liquid and provides an alternative biphasic electrode system compared to the random microdroplet/graphite system. Two types of mesoporous TiO2 thin-film electrodes, (i) a 300-400-nm film on ITO and (ii) a 300-400-nm film on ITO sputter-coated with a 20-nm porous gold layer, are investigated.     

Following the biocatalytic activities of glucose oxidase by electrochemically cross-linked enzyme-Pt nanoparticles composite electrodes

An integrated platinum nanoparticles (NPs)/glucose oxidase (GOx) composite film associated with a Au electrode is used to follow the biocatalytic activities of the enzyme. The film is assembled on a Au electrode by the electropolymerization of thioaniline-functionalized Pt NPs and thioaniline-modified GOx. The resulting enzyme/Pt NPs-functionalized electrode stimulates the O 2 oxidation of glucose to gluconic acid and H 2O 2. The modified electrode is then implemented to follow the activity of the enzyme by the electrochemical monitoring of the generated H 2O 2. The effect of the composition of the Pt NPs/GOx cross-linked nanostructures and the optimal conditions for the preparation of the electrodes are discussed.     

Electron-transfer studies with a new flavin adenine dinucleotide dependent glucose dehydrogenase and osmium polymers of different redox potentials

A new extracellular flavin adenine dinucleotide (FAD)-dependent glucose dehydrogenase from Glomerella cingulata (GcGDH) was electrochemically studied as a recognition element in glucose biosensors. The redox enzyme was recombinantly produced in Pichia pastoris and homogeneously purified, and its glucose-oxidizing properties on spectrographic graphite electrodes were investigated. Six different Os polymers, the redox potentials of which ranged in a broad potential window between +15 and +489 mV versus the normal hydrogen electrode (NHE), were used to immobilize and "wire" GcGDH to the spectrographic graphite electrode's surface. The GcGDH/Os polymer modified electrodes were evaluated by chronoamperometry using flow injection analysis. The current response was investigated using a stepwisely increased applied potential. It was observed that the ratio of GcGDH/Os polymer and the overall loading of the enzyme electrode significantly affect the performance of the enzyme electrode for glucose oxidation. The best-suited Os polymer [Os(4,4'-dimethyl-2,2'-bipyridine)(2)(PVI)Cl](+) had a potential of +309 mV versus NHE, and the optimum GcGDH/Os polymer ratio was 1:2 yielding a maximum current density of 493 μA·cm(-2) at a 30 mM glucose concentration.     

Ag nanoparticles capped by a nontoxic polymer: Electrochemical and spectroscopic characterization of a novel nanomaterial for glucose detection

Modified electrodes with metal or metal oxides nanoparticles are particularly appealing to improve sensor performances and fabricate miniaturized devices, as required also in glucose detection. A Pt electrode modified by drop casting of a novel nanostructured film based on silver nanoparticles (Ag-NPs) capped in a commercial nontoxic polyvinyl alcohol (PVA) matrix is proposed here as a valid alternative to classical glucose (bio)sensors. The extensive electrochemical and spectroscopic characterization by X-ray Photoelectron Spectroscopy (XPS) of this advanced nanomaterial is presented to study its response to glucose and to investigate the chemical nature of deposited Ag.     

Enhanced oxidation of diclofenac sodium at a nano-structured electrochemical sensing film constructed by multi-wall carbon nanotubes–surfactant composite

A multi-walled carbon nanotubes (MWNTs)–dihexadecyl hydrogen phosphate (DHP) film-coated glassy carbon electrode (GCE) was fabricated, and the voltammetric determination method of diclofenac sodium was investigated on this modified electrode by using different kinds of electrochemical techniques. The results showed that this nano-structured film electrode exhibits excellent enhancement effects on the electrochemical oxidation of diclofenac sodium. The oxidation peak current of diclofenac sodium at this film-modified electrode increased significantly compared with that at a bare glassy carbon electrode. Based on the experiment outcomes a possible mechanism was proposed and discussed. The proposed method was demonstrated by using diclofenac sodium tablets and the result was satisfying.     

基于碲膜置换制备粗糙金电极的无酶葡萄糖 电化学传感器

高粗糙度薄层贵金属纳米结构的界面组装对研制高性能的电化学传感器具有重要意义。以玻碳电极(GCE)上电沉积锯齿状形貌的半导体碲(Te)膜为模板,再将其与HAuCl_4进行原电池置换反应,制备了条棒状的粗糙Au薄膜修饰电极(AuTe-R/GCE)。在碱性环境中采用循环伏安法研究了AuTe-R/GCE对葡萄糖的电催化氧化性能,并藉此构建了无酶葡萄糖电化学传感器。结果表明,与普通的镀金GCE(Aucon/GCE)和裸Au电极相比,AuTe-R/GCE对葡萄糖的电催化氧化活性更高;在最优条件下,采用恒电位计时安培法检测了葡萄糖浓度,AuTe-R/GCE对葡萄糖的线性检测范围(LDR)为0.01～2.00 mmol·L~(-1),灵敏度为3.8 mA·mmol~(-1)·cm~(-2),检测下限(LOD)为55 nmol·L~(-1);且该无酶葡萄糖电化学传感器抗干扰能力强,稳定性好。以半导体碲膜制备特定形貌与高粗糙度薄层纳米Au的方法具有简便、快捷和低成本等优点,有望在高活性纳米电催化剂的界面组装及其电化学性能研究中被广泛应用。