共查询到15条相似文献,搜索用时 375 毫秒
1.
模糊控制规则优化方法研究 总被引:6,自引:1,他引:5
张景元 《计算机工程与设计》2005,26(11):2917-2919,2948
模糊控制规则的选择是模糊控制器设计的关键问题之一,在现有应用遗传算法优化模糊控制规则的方法进行研究的基础上,以模糊控制规则的完整性和一致性为出发点,提出了一种用遗传算法来优化模糊控制规则的改进算法,具体给出了遗传算法设计中的各种函数和算子的确定,并将优化过的规则用于设计模糊控制器,进行仿真研究,取得了令人满意的效果。 相似文献
2.
针对模糊控制器的隶属度函数和模糊控制规则的选取及优化缺乏自学习能力与知识采集的手段,以及遗传算法具有自适应、启发式、概率性、迭代式全局收敛的特点,该文章将遗传算法与模糊控制相结合,给出了一种基于改进遗传算法的模糊控制器设计策略.改进算法引入了分裂算子来避免遗传算法在寻优过程中陷入局部最优解,同时对编码方式、选择算子、交叉算子以及变异算子做了相应的调整与改进.并将此改进算法用于优化模糊控制器的隶属度函数与模糊控制规则.仿真结果表明用该改进算法优化后的模糊控制器较用普通遗传算法优化后的模糊控制器具有更好的控制性能. 相似文献
3.
4.
基于遗传算法的模糊控制器的综合优化设计 总被引:9,自引:1,他引:9
该文简要叙述了模糊控制器的优化设计原理,提出了一种采用遗传算法对模糊控制器的量化因子、比例因子、隶属函数的参数和模糊控制规则进行综合优化的设计方法,并采用VisualC++6.0编制了相应的软件,该软件已成功地应用于工程中。此外,该软件也可作为遗传优化和模糊控制器设计的辅助教学软件。 相似文献
5.
6.
7.
模糊规则的正确选择是半主动悬架模糊控制器设计的关键和难点,本文提出一种自适应地选择交叉概率和变异概率的遗传算法,以车身垂直加速度均方根值为优化目标,对汽车半主动悬架模糊控制规则进行优化,以达到提高半主动悬架模糊控制器的控制效果,改善汽车行驶平顺性的目的。为了证明该优化方法的可行性,将该自适应遗传算法优化的模糊控制器对汽车半主动悬架进行控制,并建立Matlab文本与Simulink相结合的仿真模型。仿真结果表明:优化后的半主动悬架车身垂直加速度均方根值减小,汽车行驶的平顺性得到了提高。 相似文献
8.
基于遗传算法优化的模糊PID控制研究 总被引:2,自引:0,他引:2
吴春富 《自动化技术与应用》2005,24(7):14-15,18
面对具有较强的非线性、不确定性、难以建立精确数学模型的对象控制,常规PID控制器难以达到理想的控制效果,因此就出现了如Fuzzy-PID这样的一种较好的控制方法。然而模糊控制规则和隶属函数的选取有着很大的人为主观性,本文采用改进的遗传算法优化模糊控制中的量化和比例因子,从而优化控制规则和隶属函数使其更加合理,最后对优化后的模糊控制器进行了Matlab仿真研究,结果表明经过优化后的模糊控制器的控制品质有较大的改善和提高。 相似文献
9.
针对设计高维模糊控制器过程中会遇到的“规则爆炸”问题,利用蚁群算法进行控制规则的过滤简化。为了用尽量少的规则得到尽可能好的控制效果,利用蚁群算法在饵决组合优化问题中的强大优势,在已有的完备规则中优选出若干条规则嵌人模糊控制器。采用带有时间窗口的蚁群算法去克服遗传算法优选模糊控制规则时可能产生的规则不连续的问题。该文还从遗传算法和蚁群算法工作机制的角度分析了对这两种算法加入约束条件的可操作性。以单级倒立摆控制系统为对象进行仿真研究,最后的仿真结果表明该文方法可以使模糊控制规则具有更好的简化效果和鲁棒性,并能具有好的控制效果。 相似文献
10.
11.
模糊控制器的设计是模糊控制系统的核心,而模糊控制器设计的关键部分是模糊规则,模糊规则的好坏决定了模糊控制系统的控制效果.而一般模糊规则是通过专家经验获得的,存在很大的主观性的缺点,本文以智能悬臂梁结构为研究对象,设计了模糊控制器,改进了遗传算法,提出了使用改进遗传算法对模糊规则进行优化的方法,并给出了遗传编码、适应度函数的确定方法,最后利用Matlab/Simulink建立智能悬臂梁结构的仿真模型,对模糊规则优化前后的智能悬臂梁振动控制结果进行对比.仿真结果表明,优化后的模糊规则使智能悬臂梁的振动幅度显著缩小,而且振动衰减速度明显加快. 相似文献
12.
Genetic reinforcement learning through symbiotic evolution forfuzzy controller design 总被引:1,自引:0,他引:1
Chia-Feng Juang Jiann-Yow Lin Chin-Teng Lin 《IEEE transactions on systems, man, and cybernetics. Part B, Cybernetics》2000,30(2):290-302
An efficient genetic reinforcement learning algorithm for designing fuzzy controllers is proposed in this paper. The genetic algorithm (GA) adopted in this paper is based upon symbiotic evolution which, when applied to fuzzy controller design, complements the local mapping property of a fuzzy rule. Using this Symbiotic-Evolution-based Fuzzy Controller (SEFC) design method, the number of control trials, as well as consumed CPU time, are considerably reduced when compared to traditional GA-based fuzzy controller design methods and other types of genetic reinforcement learning schemes. Moreover, unlike traditional fuzzy controllers, which partition the input space into a grid, SEFC partitions the input space in a flexible way, thus creating fewer fuzzy rules. In SEFC, different types of fuzzy rules whose consequent parts are singletons, fuzzy sets, or linear equations (TSK-type fuzzy rules) are allowed. Further, the free parameters (e.g., centers and widths of membership functions) and fuzzy rules are all tuned automatically. For the TSK-type fuzzy rule especially, which put the proposed learning algorithm in use, only the significant input variables are selected to participate in the consequent of a rule. The proposed SEFC design method has been applied to different simulated control problems, including the cart-pole balancing system, a magnetic levitation system, and a water bath temperature control system. The proposed SEFC has been verified to be efficient and superior from these control problems, and from comparisons with some traditional GA-based fuzzy systems. 相似文献
13.
14.
15.
A novel hybrid learning algorithm based on a genetic algorithm to design a growing fuzzy neural network, named self-organizing fuzzy neural network based on genetic algorithms (SOFNNGA), to implement Takagi-Sugeno (TS) type fuzzy models is proposed in this paper. A new adding method based on geometric growing criterion and the epsiv-completeness of fuzzy rules is first used to generate the initial structure. Then a hybrid algorithm based on genetic algorithms, backpropagation, and recursive least squares estimation is used to adjust all parameters including the number of fuzzy rules. This has two steps: First, the linear parameter matrix is adjusted, and second, the centers and widths of all membership functions are modified. The GA is introduced to identify the least important neurons, i.e., the least important fuzzy rules. Simulations are presented to illustrate the performance of the proposed algorithm 相似文献