Viewing angle enhanced integral imaging display based on double‐micro‐lens array

A viewing angle enhanced integral imaging display, which consists of a double microlens array, and a display panel is proposed. The double microlens array includes a convex microlens array and a concave microlens array. The display panel is used to display original elemental image array. The convex microlens array, located near the display panel, is used to provide a virtual elemental image array for the concave microlens array. The concave microlens array, located far away from the display panel, is used to display integral images with the virtual elemental image array. Compared with the original elemental image, the pitch for each virtual elemental image is magnified by the corresponding convex microlens. As a result, the viewing angle is expanded. Simulations based on ray‐tracing are performed and the results agree well with the theory.     

Resolution enhancement of integral‐imaging three‐dimensional display using directional elemental image projection

Abstract— A new approach to resolution enhancement of an integral‐imaging (II) three‐dimensional display using multi‐directional elemental images is proposed. The proposed method uses a special lens made up of nine pieces of a single Fresnel lens which are collected from different parts of the same lens. This composite lens is placed in front of the lens array such that it generates nine sets of directional elemental images to the lens array. These elemental images are overlapped on the lens array and produce nine point light sources per each elemental lens at different positions in the focal plane of the lens array. Nine sets of elemental images are projected by a high‐speed digital micromirror device and are tilted by a two‐dimensional scanning mirror system, maintaining the time‐multiplexing sequence for nine pieces of the composite lens. In this method, the concentration of the point light sources in the focal plane of the lens array is nine‐times higher, i.e., the distance between two adjacent point light sources is three times smaller than that for a conventional II display; hence, the resolution of three‐dimensional image is enhanced.     

Novel ultra‐compact two‐dimensional waveguide‐based metasurface for electromagnetic coupling reduction of microstrip antenna array

A novel ultracompact two‐dimensional (2D) waveguide‐based metasurface is proposed herein and applied for the first time to reduce mutual coupling in antenna array for multiple‐input multiple‐output applications. The unit cell of the proposed 2D waveguide‐based metasurface is ultracompact (8.6 mm × 4.8 mm, equal to λ₀/14.2 × λ₀/25.5) mainly due to the symmetrical spiral lines etched on the ground. The metasurface exhibits a bandgap with two transmission zeros attributing to the negative permeability in the vicinity of magnetic resonance and the negative permittivity in the vicinity of electric resonance. Taking advantage of these two features, a microstrip antenna array is then designed, fabricated, and measured by embedding an 8 × 1 array of the well‐engineered 2D waveguide‐based metasurface elements between two closely spaced (9.2 mm, equal to λ₀/13.3) H‐plane coupled rectangular patches. There is good agreement between the simulated and measured results, indicating that the metasurface effectively reduces antenna mutual coupling by more than 11.18 dB and improves forward gain. The proposed compact structure has one of the highest reported decoupling efficiencies among similar periodic structures with comparable dimensions. © 2015 Wiley Periodicals, Inc. Int J RF and Microwave CAE 25:789–794, 2015.     

A wide view auto‐stereoscopic 3D display with an eye‐tracking system for enhanced horizontal viewing position and viewing distance

This paper describes the development of auto‐stereoscopic three‐dimensional (3D) display with an eye‐tracking system for not only the X‐axis (right–left) and Y‐axis (up–down) plane directions but also the Z‐axis (forward–backward) direction. In the past, the eye‐tracking 3D system for the XY‐axes plane directions that we had developed had a narrow 3D viewing space in the Z‐axis direction because of occurrence of 3D crosstalk variation on screen. The 3D crosstalk variation on screen was occurred when the viewer's eye position moved back and forth along the Z‐axis direction. The reason was that the liquid crystal (LC) barrier pitch was fixed and the LC barrier was able to control the only barrier aperture position. To solve this problem, we developed the LC barrier that is able to control the barrier pitch as well as the barrier aperture position in real time, corresponding to the viewer's eye position. As a result, the 3D viewing space has achieved to expand up to 320–1016 mm from the display surface in the Z‐axis direction and within a range of ±267 mm in the X‐axis direction. In terms of the Y‐axis direction, the viewing space is not necessary to be considered, because of a stripe‐shaped parallax barrier.     

Fabrication of pinhole/micro‐lens array for improving resolution of integral imaging 3‐D display

In this paper, we present a new fabrication of micro‐lens array (MLA) with pinhole array—pinhole/micro‐lens array (P/MLA) for integral imaging 3‐D display (II), which combine lithography and ink‐jet printing. A black circular groove array (BCGA) is used as pinhole array, and laser 3‐D microscope and a homemade setup have been used for the characterization of P/MLA. The results show that high‐precision P/MLA can be obtained using BCGA as templates. By controlling the driving voltage at different steps, the distance between nozzle and substrate, as well as the number of liquid droplets, P/MLA with smooth morphology, different sizes, good repeatability of geometry parameters, great uniformity of focusing, and good converging performance can be achieved. For demonstration, P/MLA with curvature, focal length, numerical aperture, and F‐number of 815.8 μm, 1.60 mm, 0.1311, and 3.8 are applied for the reconstruction in II, exhibiting good reconstruction performance with high resolution, and BCGA reduces the influence of stray light on II and improves the quality of the reconstructed image.     

360°‐viewable cylindrical integral imaging system using a 3‐D/2‐D switchable and flexible backlight

Abstract— A 360°‐viewable cylindrical three‐dimensional (3‐D) display system based on integral imaging has been implemented. The proposed system is composed of a cylindrically arranged electroluminescent (EL) pinhole film, an EL film backlight, a barrier structure, and a transmission‐type flexible display panel. The cylindrically arranged point‐light‐source array, which is generated by the EL pinhole film reconstructs 360°‐viewable virtual 3‐D images at the center of the cylinder. In addition, the proposed system provides 3‐D/2‐D convertibility using the switching of EL pinhole film from a point light source to a surface light source. In this paper, the principle of operation, analysis of the viewing parameters, and the experimental results are presented.     

Full‐parallax autostereoscopic display with scalable lateral resolution using overlaid multiple projection

Abstract— A method to increase the viewing resolution of an autostereoscopic display without increasing the density of microlenses is proposed. Multiple projectors are used for the projection images to be focused and overlaid on a common plane in the air behind the microlens array. The multiple overlaid projection images yield multiple light spots inside the region of each elemental lenslet of the microlens array. This feature provides scalable high‐resolution images by increasing the number of projectors. Based on the proposed method, a prototype display that includes 15 projectors was designed and built. 3‐D images were successfully reproduced on the prototype display with full parallax and a wide viewing angle of 70°.     

Depth‐enhanced integral‐imaging 3D display using different optical path lengths by polarization devices or mirror barrier array

Abstract— Depth‐enhanced integral three‐dimensional (3D) imaging using different optical path lengths by using a polarization selective mirror pair or mirror barrier array is proposed. In the proposed approach, the enhancement of image depth is achieved by repositioning two types of elemental image planes, thus effectively two central depth planes are obtained. One of the two implementation methods makes use of the two‐arm structure that has different optical path lengths and polarization‐selective mirrors. The other utilizes the mirror barrier array. The primary advantage of the method with polarization devices is that we can observe 3D images that maintain some level of viewing resolution with a large depth difference without any mechanical moving part. The mirror barrier array has the advantage of the compact thickness. We demonstrated and verified our proposals experimentally.     

The effect of stereoscopic viewing in a word‐search task with a layered background

Abstract— The benefits of stereoscopic viewing were explored in searching in words superimposed over a background. In the first experiment, eight participants searched for text in a normal 2‐D display, a 3‐D display using a parallax barrier, and a darkened 2‐D display of equivalent brightness to the 3‐D display. Word‐search performance was significantly faster for the bright 2‐D display vs. the 3‐D display, but when brightness was controlled, performance on the 3‐D display was better relative to the 2‐D (dim) display. In a second experiment, the effect of floating text vs. sinking background disparity was assessed across four background conditions. Twenty participants saw only the floating‐text (FT) condition and 20 participants saw only the sinking‐background (SB) condition. Performance of the SB group was significantly better than that of FT group, and the advantage of SB disparity was greater with the more‐complex backgrounds. Thus, when a parallax‐barrier 3‐D display is used to view text or other figural information overlaid on a background, it is proposed that the layer of primary interest (foreground) should be displayed with zero disparity (on the physical display surface) with the secondary layer (background) appearing to be sunk beneath that surface.     

Two‐way multi‐view 2‐D/3‐D display combining LC lens and HVxDP panel using novel pixel arrangement

We have developed a two‐way multi‐view 2‐D/3‐D display combining a liquid crystal lens and horizontally and vertically x times‐density pixels (HVxDP) arrangement. The two‐way multi‐view display features the same display resolution in 2‐D and 3‐D modes and a quite small color moiré for landscape and portrait, respectively, when using the HVxDP arrangement. In this paper, we realized suitable 3‐D properties for achieving a good balance between 3‐D moiré and 3‐D crosstalk for landscape and portrait by a two‐way liquid crystal lens with two kinds of focal lengths for the edge part and the center part of the lens.     

A metallic 3D printed K‐band quasi‐pyramidal‐horn antenna array

A K‐band (18‐27 GHz) antenna array is presented in this article. By deposing the quasi‐pyramidal‐horn upon a print circuit board (PCB), a traveling‐wave quasi‐pyramidal‐horn antenna is formed. Parasitic rings are introduced to decrease the quality factor for an extended bandwidth. The antenna element demonstrates impedance bandwidth 18.6 to 23.3 GHz. The gain is 10.3 dBi at 20.4 GHz with a stable radiation pattern. The impedance bandwidth of a 2 × 2 array is 18.3 to 22.7 GHz, with a maximum gain of 15.2 dBi at 20.4 GHz. The simulated and measured radiation patterns on E‐ and H‐planes at 20.4 GHz agree well. Taking advantage of the 3D printing technology, the quasi‐pyramidal horn is fabricated by selective laser melting using aluminum alloy for time‐saving and process simplicity. The proposed design highlights the hybrid usage of PCB and metallic 3D printing technology in fabricating microwave devices. It is a capable candidate for wireless communication.     

Optical simulation for cross‐talk evaluation and improvement of autostereoscopic 3‐D displays with a projector array

Abstract— Multi‐view spatial‐multiplexed autostereoscopic 3‐D displays normally use a 2‐D image source and divide the pixels to generate perspective images. Due to the reduction in the resolution of each perspective image for a large view number, a super‐high‐resolution 2‐D image source is required to achieve 3‐D image quality close to the standard of natural vision. This paper proposes an approach by tiling multiple projection images with a low magnification ratio from a microdisplay to resolve the resolution issue. Placing a lenticular array in front of the tiled projection image can lead to an autostereoscopic display. Image distortion and cross‐talk issues resulting from the projection lens and pixel structure of the microdisplay have been addressed with proper selection of the active pixel and adequate pixel grouping and masking. Optical simulation has shown that a 37‐in. 12‐view autostereoscopic display with a full‐HD (1920 × 1080) resolution can be achieved with the proposed 3‐D architecture.     

Circular camera array system for 3‐D displays based on the reconstruction of parallax rays

Abstract— A circular camera system employing an image‐based rendering technique that captures light‐ray data needed for reconstructing three‐dimensional (3‐D) images by using reconstruction of parallax rays from multiple images captured from multiple viewpoints around a real object in order to display a 3‐D image of a real object that can be observed from multiple surrounding viewing points on a 3‐D display is proposed. An interpolation algorithm that is effective in reducing the number of component cameras in the system is also proposed. The interpolation and experimental results which were performed on our previously proposed 3‐D display system based on the reconstruction of parallax rays will be described. When the radius of the proposed circular camera array was 1100 mm, the central angle of the camera array was 40°, and the radius of a real 3‐D object was between 60 and 100 mm, the proposed camera system, consisting of 14 cameras, could obtain sufficient 3‐D light‐ray data to reconstruct 3‐D images on the 3‐D display.     

Multi‐view 3‐D display employing a flat‐panel display with slanted pixel arrangement

Abstract— A flat‐panel display with a slanted subpixel arrangement has been developed for a multi‐view three‐dimensional (3‐D) display. A set of 3M × N subpixels (M × N subpixels for each R, G, and B color) corresponds to one of the cylindrical lenses, which constitutes a lenticular lens, to construct each 3‐D pixel of a multi‐view display that offers M × N views. Subpixels of the same color in each 3‐D pixel have different horizontal positions, and the R, G, and B subpixels are repeated in the horizontal direction. In addition, the ray‐emitting areas of the subpixels within a 3‐D pixel are continuous in the horizontal direction for each color. One of the vertical edges of each subpixel has the same horizontal position as the opposite vertical edge of another subpixel of the same color. Cross‐talk among viewing zones is theoretically zero. This structure is suitable for providing a large number of views. A liquid‐crystal panel having this slanted subpixel arrangement was fabricated to construct a mobile 3‐D display with 16 views and a 3‐D resolution of 256 × 192. A 3‐D pixel is comprised of 12 × 4 subpixels (M = 4 and N = 4). The screen size was 2.57 in.     

Current‐mode ambient‐light sensing circuit using p‐type low‐temperature polycrystalline‐silicon TFTs and p‐i‐m diodes

Abstract— A current‐mode ambient‐light sensing circuit, which is composed of p‐intrinsic‐metal (p‐i‐m) diodes and p‐type low‐temperature polycrystalline‐silicon (LTPS) thin‐film transistors (TFTs) for autobrightness control of display panels. The proposed sensing circuit exhibits a wide dynamic range of 56 dB, while the output signal range is 1.8 times wider than that of a previously reported sensing circuit.     

Viewing‐angle‐enhanced integral imaging system using high‐refractive‐index medium and curved micro‐lens array

In the integral imaging (II) system using a curved micro‐lens array (MLA), the viewing angle is limited by the gap mismatch. Here, we propose a system to decrease the gap mismatch for enhancing the viewing angle. In the proposed system, a layer of high‐refractive‐index medium is assembled between the display panel and the curved MLA. The principle of the proposed II system is studied in detail. Simulations based on ray tracing are performed, and the results show that the proposed II system can effectively enhance the viewing angle.     

Broadband T‐bar fed slot antenna array with stable horizontally polarized omnidirectional radiation

A broadband horizontally polarized omnidirectional antenna array is proposed, which consists of a circular array of four identical broadband T‐bar fed cavity‐backed slot antenna elements and a 1‐to‐4 power divider. The proposed omnidirectional antenna array has a compact diameter of only 0.44λ₀, a broad bandwidth of 75.9% (450‐1000 MHz) and a favorable omnidirectional radiation pattern in the azimuth plane with a gain variation below 3 dB in the operating band. Moreover, the cavity‐backed structure makes the proposed antenna array hardly affected by metal environment and the all metal construction allows for high‐power applications, and the reserved cable channel behind the cavities of the antenna elements ensures the extensionality and stability of the proposed array when longitudinal array expansion is needed. Design procedures of the proposed antenna array have been described in detail, simulations and measurements of the proposed antenna array have also been carried out to validate its performance in this article.     

Ten switched‐beams with 2 × 2 series‐fed 2.4 GHz array antenna and a simple beam‐switching network

This article presents a 2 × 2 series fed 2.4 GHz patch antenna array having multiple beam switching capabilities by using two simple 3 dB/90° couplers to achieve required amplitude and phase excitations for array elements with reduced complexity, cost and size. The beam switching performance with consistent gain and low side lobe levels (SLL) is achieved by exciting the array elements from orthogonally placed thin quarter‐wave (λ_g/4) feeds. The implemented array is capable to generate ten (10) switched‐beams in 2‐D space when series fed elements are excited from respective ports through 3 dB quadrature couplers. The dual polarized characteristics of presented array provide intrinsic interport isolation between perpendicularly placed ports through polarization diversity to achieve independent beam switching capabilities for intended directions. The implemented antenna array on 1.575 mm thick low loss (tan δ = 0.003) NH9450 substrate with ε_r = 4.5 ± 0.10 provides 10 dB return loss impedance bandwidth of more than 50 MHz. The measured beam switching loss is around 0.8 dB for beams switched at θ = ±20°, Ф = 0°, 90°, and 45° with average peak gain of 9.5 dBi and SLL ≤ ?10 dB in all cases. The novelty of this work is the capability of generating ten dual polarized switched‐beams by using only two 3 dB/90° couplers as beam controllers.     

Circuits and AMOLED display with self‐aligned a‐IGZO TFTs on polyimide foil

A process to make self‐aligned top‐gate amorphous indium‐gallium‐zinc‐oxide (a‐IGZO) thin‐film transistors (TFTs) on polyimide foil is presented. The source/drain (S/D) region's parasitic resistance reduced during the SiN interlayer deposition step. The sheet resistivity of S/D region after exposure to SiN interlayer deposition decreased to 1.5 kΩ/□. TFTs show field‐effect mobility of 12.0 cm²/(V.s), sub‐threshold slope of 0.5 V/decade, and current ratio (I_ON/OFF) of >10⁷. The threshold voltage shifts of the TFTs were 0.5 V in positive (+1.0 MV/cm) bias direction and 1.5 V in negative (?1.0 MV/cm) bias direction after extended stressing time of 10⁴ s. We achieve a stage‐delay of ~19.6 ns at V_DD = 20 V measured in a 41‐stage ring oscillator. A top‐emitting quarter‐quarter‐video‐graphics‐array active‐matrix organic light‐emitting diode display with 85 ppi (pixels per inch) resolution has been realized using only five lithographic mask steps. For operation at 6 V supply voltage (V_DD), the brightness of the display exceeds 150 cd/m².     

Crosstalk‐free dual‐view integral imaging display

We propose a crosstalk‐free dual‐view integral imaging display. It is composed of a display panel, a barrier array, and a micro‐lens array. The central barrier is located at the vertical central axes of the display panel and the micro‐lens array to split the element image array and the viewing zone. Moreover, other barriers are located at the margins of the elemental images and corresponding micro‐lenses to eliminate the crosstalk. The lights emitting from the left and right half of the element image array are modulated by the left and right half of the micro‐lens array to reconstruct the right and left viewing zones, respectively. A prototype of the proposed dual‐view integral imaging display is developed, and good experimental results agree well with the theory.