2006～2007年世界塑料工业进展

收集了2006年7月～2007年6月世界塑料工业的相关资料,介绍了2006～2007年世界塑料工业的发展情况,提供了世界塑料产量、消费量及全球各类树脂的需求量及产能情况.按通用热塑性树脂(聚乙烯、聚丙烯、聚苯乙烯、聚氯乙烯、ABS树脂)、工程塑料(尼龙、聚碳酸酯、聚甲醛、热塑性聚酯、聚苯醚)、特种工程塑料(聚苯硫醚、液晶聚合物、聚醚醚酮)、通用热固性树脂(酚醛、聚氨酯、不饱和聚酯树脂、环氧树脂)不同品种的顺序,对树脂的产量、消费量、供需状况及合成工艺、产品应用开发、树脂品种的延伸及应用的进一步扩展等技术作了详细介绍.     

知识创新是工业尿素合成技术创新之本——实验室研究篇

对国内外研究者在尿素合成反应的热力学、动力学、化学平衡及相平衡等方面的研究成果进行了总结和评价,提供了尿素合成反应的热力学、动力学数据和相图,提出了一些新理念.     

意大利ES公司变频器进入中国市场

3月11日,"意科走进中国"新闻发布会在京举行,与来自冶金、石化、电力、建材、水处理、纺织、市政等行业的专家、用户及十几家业内知名的媒体共同分享了意科公司的发展历程,意科变频器的创新标准以及意科在奥运年全面推向中国市场的决心和计划.     

中国工程塑料市场综述(下)

4.3 聚碳酸酯海关进出口分析 1999～2006年间PC进口量年均增长27.91%,比1998～2005年间PC进口量年均增长率31.27%下降3.36个百分点.国内产量偏低、市场需求巨大的现状进一步暴露.中国PC消费主要依靠进口,2006年中国产量仅占总消费量的10%上下.1999～2006年间PC进口量年均增长27.91%,比1998～2005年间Pc进口量年均增长率36.68%下降3.36个百分点.2006年初级形状的聚碳酸酯进口地有45个,主要进口地为泰国(占16.49%),其次为中国(12.86%)、新加坡(11.50%)、美国(10.95%)、日本(10.65%)、韩国(9.81%)、中国台湾省(9.50%)、西班牙(7.46%),八进口地进口量占总进口量的89.2%.     

夹层粘接在大型机床导轨修理中的应用

1 "夹层粘接"新工艺 "夹层粘接"是作者经多年研究、开发的一种新技术,在设备大修理工作中,对于严重摩擦磨损的机床导轨,采用独特的"夹层粘接"工艺,以夹布塑料为加厚层,填充F4为表面耐磨层,使机床导轨恢复了原有的精度和尺寸要求,缩短了修理时间,减轻了劳动强度,节约了修理费用,取得了显著的综合效益.     

加压稀硝"三合一"主机修理小结

我公司年产80 kt加压稀硝装置是国内首例完全国产化装置,其"三合一"主机的汽轮机、减速机由杭汽制造,空压机、膨胀机由陕鼓生产.自1986年装置建成投运以来,每年检修都发现机组气封严重磨损,机壳与转子不同心.为此,公司利用2006年11月大修和2007年7月停车机会对机组进行了全面整修,以期从根本上消除存在的问题.     

工业评述2001～2002年国外塑料工业进展

收集了2001年7月到2002年6月有关国外塑料工业的相关期刊资料,介绍了2001年到2002年国外塑料工业的发展情况,提供了世界各地域塑料原材料的产量及构成比,日本、美国、加拿大、德国、法国、比利时、墨西哥、芬兰、西班牙等国家的树脂产量、消费量及增长率,以及日本、西欧、北美等地区的不同品种塑料原料消费量和增长率统计.按通用热塑性树脂(聚乙烯、聚丙烯、聚苯乙烯、聚氯乙烯、ABS树脂)、工程塑料(尼龙、聚碳酸酯、聚甲醛、热塑性聚酯、聚苯醚)、通用热固性树脂(酚醛、聚氨酯、不饱和树脂、环氧树脂)、特种工程塑料(聚苯硫醚、液晶聚合物、聚醚醚酮)不同品种的顺序,对树脂的产量、消费量及合成工艺、产品应用开发、树脂品种的延伸及应用的进一步扩展等有关技术作了详细的介绍.     

骨胶生产中蒸骨制胶操作方法

1 对蒸骨制胶过程的认识 蒸骨制胶的过程也就是用蒸汽使骨料块在密封的锅内受热、受压,使骨质疏松,由生胶质热解转变为可溶解于热水的动物胶质(习惯上称之为"骨胶")的过程.     

合成TBHQ的工艺改进

研究了以工业品甲基叔丁基醚(MTBE)和对苯二酚(HQ)为原料,在磷酸催化下,合成TBHQ的工艺参数.对催化剂的活性、原料的配比和反应时间等进行了优化考察.当对苯二酚∶甲基叔丁基醚∶磷酸=1∶1∶0.5(mol),反应温度为125℃,反应时间3.5h,TBHQ的收率达85.7%.与传统方法相比,该方法具有价廉、操作简单的特点,具有较高的开发、应用价值.用MTBE作原料合成TBHQ未见有关文献具体报道.     

湖光山色清新隽永——访江西省高级工艺美术师杨修勇

在我的办公桌上,放着一把<井岗山八角楼>粉彩山水壶,每当我空闲时,总喜欢拿在手中把玩,这件小小的山水壶虽不能展现气势豪雄的大写意山水画面,也不可能真正达到烟云满纸的效果,但细腻的工笔,雅静的画意给人一种清心的感觉和享受.     

树脂基复合材料成型工艺研究进展

主要综述了树脂基复合材料的几种成型工艺,包括RTM、VARTM、CRTM、LRTM、RFI、VARI、SCRIMP、SRIM、TERM,各自的发展现状、成型原理、特点等.     

Potential of Polyvinylidene Fluoride/Carbon Nanotube Composite in Energy,Electronics, and Membrane Technology: An Overview

Polyvinylidene fluoride (PVDF) is a semicrystalline thermoplastic and electroactive polymer with piezoelectric and pyroelectric properties, thermal stability, elasticity, and chemical resistance. PVDF exits in five different phases (α, β, δ, γ, and ε-phase). Unique properties of this polymer enhances its use in chemical, biomedical, and electronic industries such as supercapacitors, transducers, actuators, and batteries. Carbon nanotube (CNT) is used as reinforcement to exploit full potential of PVDF in energy, electronics, and membrane technology. The nanofiller affects morphology, piezoelectric, pyroelectric, electrical, dielectric, thermal, and mechanical properties of PVDF-based nanocomposite. CNT content and chemical modification influence properties as well as application of PVDF.     

A review of ZrO2 nanoparticles applications and recent advancements

The many branches of nanoscience have made significant strides and advancements during the past ten years, as has the entire scientific community. Zirconia nanoparticles have several uses as adsorbents, nanosensors, nanocatalysts, and other types of nanomaterials. Their outstanding biomedical uses in dental care and drug delivery, as well as their intriguing biological characteristics, such as their anti-cancer, anti-microbial, and antioxidant activity, have further encouraged researchers to investigate their physicochemical properties using various synthetic pathways. Due to the popularity of zirconia-based nanomaterials, the current research comprehensively examines several synthesis techniques and their effects on the composition, dimensions, forms, and morphologies of these nanomaterials. In general, there are two methods for creating zirconia nanoparticles: chemical synthesis, which uses hydrothermal, solvothermal, sol-gel, microwave, solution combustion, and co-precipitation processes; and a greener method, which uses bacteria, fungi, and plant components. The aforementioned techniques have been evaluated in the present review for achieving particular phases and shapes. A thorough analysis of zirconia-based nanomaterial's uses is also included in the review. Furthermore, comparisons with their equivalent composites for various applications as well as the influence of particular phases and morphologies have been added. The final portion includes the summary, future outlook, and potential application.     

Graphene-Based Sensors for the Detection of Bioactive Compounds: A Review

Over the last years, different nanomaterials have been investigated to design highly selective and sensitive sensors, reaching nano/picomolar concentrations of biomolecules, which is crucial for medical sciences and the healthcare industry in order to assess physiological and metabolic parameters. The discovery of graphene (G) has unexpectedly impulsed research on developing cost-effective electrode materials owed to its unique physical and chemical properties, including high specific surface area, elevated carrier mobility, exceptional electrical and thermal conductivity, strong stiffness and strength combined with flexibility and optical transparency. G and its derivatives, including graphene oxide (GO) and reduced graphene oxide (rGO), are becoming an important class of nanomaterials in the area of optical and electrochemical sensors. The presence of oxygenated functional groups makes GO nanosheets amphiphilic, facilitating chemical functionalization. G-based nanomaterials can be easily combined with different types of inorganic nanoparticles, including metals and metal oxides, quantum dots, organic polymers, and biomolecules, to yield a wide range of nanocomposites with enhanced sensitivity for sensor applications. This review provides an overview of recent research on G-based nanocomposites for the detection of bioactive compounds, providing insights on the unique advantages offered by G and its derivatives. Their synthesis process, functionalization routes, and main properties are summarized, and the main challenges are also discussed. The antioxidants selected for this review are melatonin, gallic acid, tannic acid, resveratrol, oleuropein, hydroxytyrosol, tocopherol, ascorbic acid, and curcumin. They were chosen owed to their beneficial properties for human health, including antibiotic, antiviral, cardiovascular protector, anticancer, anti-inflammatory, cytoprotective, neuroprotective, antiageing, antidegenerative, and antiallergic capacity. The sensitivity and selectivity of G-based electrochemical and fluorescent sensors are also examined. Finally, the future outlook for the development of G-based sensors for this type of biocompounds is outlined.     

Electrospinning jets and polymer nanofibers

In electrospinning, polymer nanofibers are formed by the creation and elongation of an electrified fluid jet. The path of the jet is from a fluid surface that is often, but not necessarily constrained by an orifice, through a straight segment of a tapering cone, then through a series of successively smaller electrically driven bending coils, with each bending coil having turns of increasing radius, and finally solidifying into a continuous thin fiber. Control of the process produces fibers with nanometer scale diameters, along with various cross-sectional shapes, beads, branches and buckling coils or zigzags. Additions to the fluid being spun, such as chemical reagents, other polymers, dispersed particles, proteins, and viable cells, resulted in the inclusion of the added material along the nanofibers. Post-treatments of nanofibers, by conglutination, by vapor coating, by chemical treatment of the surfaces, and by thermal processing, broaden the usefulness of nanofibers.     

Maternal Reproductive Toxicity of Some Essential Oils and Their Constituents

Even though several plants can improve the female reproductive function, the use of herbs, herbal preparations, or essential oils during pregnancy is questionable. This review is focused on the effects of some essential oils and their constituents on the female reproductive system during pregnancy and on the development of the fetus. The major concerns include causing abortion, reproductive hormone modulation, maternal toxicity, teratogenicity, and embryo-fetotoxicity. This work summarizes the important studies on the reproductive effects of essential oil constituents anethole, apiole, citral, camphor, thymoquinone, trans-sabinyl acetate, methyl salicylate, thujone, pulegone, β-elemene, β-eudesmol, and costus lactone, among others.     

A review of liquid silicone rubber injection molding: Process variables and process modeling

Liquid silicone rubber (LSR) is an elastomer molded into critical performance components for applications in medical, power, consumer, automotive, and aerospace applications. This article reviews process behavior, material modeling, and simulation of the (LSR) injection molding process. Each phase of the LSR injection molding process is discussed, including resin handling, plastication, injection, pack and hold, and curing; and factors affecting the molding process are reviewed. Processing behavior of LSR is marked by transient interactions between curing, shear rate, temperature, pressure, and tooling. Therefore, current LSR models for curing, viscosity, pressure, and temperature are discussed. Process dynamics and material modeling are combined in LSR injection molding simulations with applications in mold design, troubleshooting process-induced defects, and management of shear stress and non-uniform temperatures between LSR and substrates during overmolding. Finally, case studies using commercial simulation software are presented, which have shown cavity pressure and flow front advancement within 3% of experimental values. Optimization of LSR materials, data collection, model fitting, venting, and bonding remain areas of continued interest.     

新型碳材料与聚烯烃复合材料研究进展

最近二十多年,由于新型碳材料（包括富勒烯、碳纳米管和石墨烯等）在很多方面具有优异的性能,开辟了诸多新颖的应用领域。本文综述了碳纳米管和石墨烯在聚烯烃树脂中的应用,通过物理共混和原位合成法形成复合材料,提高了聚烯烃材料的力学性能、结晶和熔融性能、热稳定性和导电性等,复合材料在场发射显示器件、储氢材料、电池、超强超韧复合材料、显微镜探头、超级电容器、电子枪、纳米电子器件、传感器等诸多领域已取得了较大的突破。     

2004～2005年国外塑料工业进展

收集了2004年7月-2005年6月国外塑料工业的相关资料，介绍了2004年～2005年国外塑料工业的发展情况。提供了世界几大区域塑料的产量、增长率及所占份额；美国、德国、日本、韩国、法国、比利时、印度、西班牙、中国台湾、加拿大、巴西、英国等国家和地区的不同树脂的产量及消费量；各国、各地区塑料原料的产量、进出口量、国内消费量和人均消费量；日本塑料原料的生产情况。按通用热塑性树脂（聚乙烯、聚丙烯、聚苯乙烯、聚氯乙烯、ABS树脂）、工程塑料（聚酰胺、聚碳酸酯、聚甲醛、热塑性聚酯、聚苯醚）、通用热固性树脂（酚醛、聚氨酯、不饱和树脂、环氧树脂）、特种工程塑料（聚苯硫醚、液晶聚合物、聚醚醚酮、聚砜）的品种顺序，对树脂的产量、消费量、供需状况及合成工艺、产品开发、树脂品种的延伸及应用的扩展作了详细的介绍。     

Profiling of Phytosterols, Tocopherols and Tocotrienols in Selected Seed Oils from Botswana by GC–MS and HPLC

The phytosterol, tocopherol, and tocotrienol profiles for mkukubuyo, Sterculia africana, manketti, Ricinodendron rautanenni, mokolwane, Hyphaene petersiana, morama, Tylosema esculentum, and moretologa-kgomo, Ximenia caffra, seed oils from Botswana have been determined. Normal-phase HPLC analysis of the unsaponifiable matter showed that among the selected oils, the most abundant tocopherol and tocotrienol were γ-tocopherol (2232.99 μg/g) and γ-tocotrienol (246.19 μg/g), detected in manketti and mkukubuyo, respectively. Mokolwane oil, however, contained the largest total tocotrienol (258.47 μg/g). Total tocol contents found in manketti, mokolwane, mkukubuyo, morama, and moretologa-kgomo oils were 2238.60, 262.40, 246.20, 199.10, and 128.0 μg/g, respectively. GC–MS determination of the relative percentage composition of phytosterols showed 4-desmethylsterols as the most abundant phytosterols in the oils, by occurring up to 90% in moretologa-kgomo, mkukubuyo, and manketti seed oils, with β-sitosterol being the most abundant. Mokolwane seed oil contained the largest percentage composition of 4,4-dimethylsterols (45.93%). Besides 4-desmethylsterols (75%), morama oil also contained significant amounts of 4,4-dimethylsterols and 4-monomethylsterols (15.72% total). GC–MS determination of the absolute amounts of 4-desmethylsterols, after SPE fractionation of the unsaponifiable matter, confirmed that β-sitosterol was the most abundant phytosterol in the test seed oils, with manketti seed oil being the richest source (1326.74 μg/g). The analysis showed total 4-desmethylsterols content as 1617.41, 1291.88, 861.47, 149.15, and 109.11 μg/g for manketti, mokolwane, mkukubuyo, morama, and moretologa-kgomo seed oils, respectively.