不同活性组分催化剂对煤油水重整制氢性能的影响

采用等体积分步浸渍法以γ-Al_2O_3为载体制备不同活性组分的催化剂,并在固定床管式反应器中研究了煤油水重整制氢性能受不同活性组分催化剂的影响。采用XRD、SEM及BET表征手段对PtLaLiCe/γ-Al_2O_3和NiLaLiCe/γ-Al_2O_3催化剂进行表征。结果表明,对于煤油水重整制氢过程,以Pt为活性组分制备的催化剂催化性能更优,氢产率可高达34.42 mol/mol煤油。     

浸渍-水热制备方法对Ni/Al_2O_3催化剂结构和性能的影响

活性组分与载体之间的相互作用能够影响催化剂的催化性能。浸渍法是最常规的催化剂制备方法,本文通过对浸渍之后的催化剂前驱体进行水热处理,改善了浸渍法制备的Ni/Al_2O_3催化剂上Ni粒子与Al_2O_3之间的相互作用,从而改善了催化剂的催化性能。通过XRD和H_2-TPR表征发现,水热处理4h制得的Ni/Al_2O_3-4催化剂上,Ni与Al_2O_3之间的相互作用强度适中,Ni-Al合金的衍射峰强度最低,活性组分Ni的衍射峰最为弥散,该催化剂在甲烷干重整具有最高的催化性能。     

镍基氨分解制氢催化剂的制备及性能

用浸渍法制备Ni/Al_2O_3和Ni/xMo-Al_2O_3催化剂,以氨分解为模型反应,考察Ni负载量、焙烧温度、溶剂和助剂等合成条件对催化剂催化性能的影响,通过XRD和TG-DTG表征方法对催化剂进行表征。结果表明,最佳合成条件:Ni负载质量分数为16%,焙烧温度350℃,采用丙酮为溶剂制备的Ni/Al_2O_3催化剂具有较好的催化活性。500℃添加质量分数3%的助剂Mo可以使Ni/Al_2O_3催化剂的活性显著提高39%,Ni/3%Mo-Al_2O_3催化剂的氨分解率达93.5%。     

Pd-Pt-Ce/Al_2O_3催化剂在VOC净化处理中的催化性能

采用浸渍法制备Pd-Pt-Ce/Al_2O_3催化剂,考察贵金属Pd和Pt负载量、助剂种类及负载量、空速对催化甲苯燃烧活性的影响。结果表明,适宜的贵金属负载量和助剂可极大提高Pd-Pt/Al_2O_3催化剂活性,当Pd和Pt质量分数分别为0.05%和0.005%、助剂Ce质量分数为1%时,Pd-Pt-Ce/Al_2O_3催化剂在低温条件下表现出较好的催化性能。空速对催化剂的催化活性影响较为明显,适宜的空速低于20 000 h-1。     

乙醇脱氢氨化制乙腈Cu基催化剂的研究

采用浸渍法制备Cu/Al_2O_3和Cu-Ni/Al_2O_3催化剂,研究载体、CuO负载量和助剂Ni元素加入对催化剂的影响,采用XRD、BET、H_2-TPR和NH_3-TPD等对催化剂进行表征,考察反应温度、氨醇物质的量比和空速对催化剂性能的影响。结果表明,在反应温度295℃、氨醇物质的量比5. 5和乙醇空速0. 6 h~(-1)条件下,Cu1Ni1/Al_2O_3催化剂催化性能最佳,且运行550 h,催化活性未明显降低。     

纳米金催化剂室温下对甲醛的催化氧化

Fe Ox和Ce O2对于Au/Al_2O_3催化剂催化氧化甲醛是一种有效助剂。本文采用等体积浸渍法制备了Au/Fe Ox/Al_2O_3和Au/Fe Ox-Ce O2/Al_2O_3复合催化剂。考察金负载量和Fe Ox-Ce O2复合助剂对催化剂室温催化氧化甲醛的影响,并利用XRD、BET和透射电镜(TEM)对催化剂进行技术表征。研究表明:在Au负载量等同时,催化活性顺序是:Au/Fe O_x-Ce O_2/Al_2O_3Au/Fe O_x/Al_2O_3Au/Ce O2/Al_2O_3;Au负载量越高催化剂催化活性越好。     

Ni-Li/γ-Al2O3催化剂对丙三醇水重整制氢工艺条件优化

采用过量浸渍法,以γ-Al_2O_3为载体,Ni为活性组分,Li为助剂,制备Ni-Li/γ-Al_2O_3催化剂。考察了催化剂床层温度、水醇比、丙三醇液空速及夹带气流量对丙三醇水重整制氢工艺条件的影响,并对催化剂进行了BET、XRD及SEM表征手段。结果表明,当反应温度600℃、液空速0.36 h~(-1)、水醇比56时,氢产率可达5.066 mol/mol,说明Ni-Li/γ-Al_2O_3催化剂适用于丙三醇重整制氢工艺。     

过渡金属Ni对Pd/Al_2O_3催化剂甲烷催化燃烧性能的影响

考察过渡金属Ni对Pd/Al_2O_3催化剂甲烷催化燃烧活性的影响以及过渡金属负载量及循环条件对甲烷降解性能的影响,采用扫描电镜、N_2吸附-脱附以及H_2程序升温还原技术对催化剂进行表征。结果表明,过渡金属Ni的添加对催化剂在(375~475)℃下的甲烷催化燃烧活性产生影响。催化剂经多次重复使用后,催化燃烧活性提高。分析原因为经过渡金属Ni改性后,可与载体形成NiAl_2O_4尖晶石,促进活性组分形成较小晶粒,并改善活性组分分散度,提高催化剂催化活性。     

Cu-ZnO/γ-Al2O3与B205联合用于甲醇水蒸气重整制氢工艺

采用等体积分步浸渍法以Cu为活性组分,ZnO为助剂,Al_(2)O_(3)为载体,制备Cu-ZnO/γ-Al_(2)O_(3)催化剂,并将Cu-ZnO/γ-Al_(2)O_(3)催化剂与工业催化剂B205联合应用于甲醇水蒸气重整制氢工艺,考察反应床层温度、液空速和水醇比对氢产率的影响,并利用XRD及TPR对催化剂的结构、还原温度进行表征。结果表明,联合使用Cu-ZnO/γ-Al_(2)O_(3)与B205制氢催化剂对甲醇水蒸气重整制氢表现出较好的稳定性,在反应床层温度245℃、液空速0.36 h-1和水醇物质的量比4.0条件下,氢产率为2.5216 mol·mol^(-1)。     

Pt/TiO_2催化二甲醚部分氧化重整制氢

二甲醚是一种理想的氢载体,可用于解决氢的储存和运输。以Pt/TiO_2为部分氧化催化剂,结合Ni/Al_2O_3重整催化剂,考察钛前驱体和焙烧温度对二甲醚部分氧化重整制氢反应的影响。结果表明,以Ti(C4H9O)4为原料制备的TiO_2为金红石相,Ti(SO4)2或Ti O(OH)2为原料制备的TiO_2为锐钛矿相;以Ti(C4H9O)4为原料制备的Pt/TiO_2-E催化剂催化性能略好,转化率接近100%,H2收率约90%,表明金红石相TiO_2负载的Pt催化剂略佳;以Ti(SO4)2为原料制备的Pt/TiO_2-S催化剂500℃焙烧可获得金红石相TiO_2。与Pt/Al_2O_3催化剂相比,Pt/TiO_2催化剂具有更好的催化性能,H2收率超过90%,而Pt/Al_2O_3催化剂H2收率约80%。     

M/γ-Al2O3催化剂对煤油水重整制氢的影响

以γ-Al₂O₃为载体,采用等体积分步浸渍法制备了以Ni为活性组分,La、Ce、Fe、Cr、Co为助剂的催化剂M/γ-Al₂O₃,在固定床管式反应器中研究了M/γ-Al₂O₃催化剂的性能,考察了反应温度、水碳比和空速对氢产率的影响,并对催化剂进行XRD、SEM和BET表征。结果表明,NiLaCeFeCrCo/γ-Al₂O₃催化剂具有较好的催化性能,在反应温度700 ℃、水碳物质的量比10和空速6 min^-1的条件下,氢产率达到27.335 mol·mol^-1,并在300 min内表现出较好的活性,平均氢产率为21.966 mol·mol^-1。     

Production of hydrogen for fuel cells by reformation of biomass-derived ethanol

The reformation of biomass-derived ethanol to a hydrogen-rich gas stream suitable for feeding fuel cells is investigated as an efficient and environmentally friendly process for the production of electricity for mobile and stationary applications. Steam reforming of ethanol is investigated over Ni catalysts supported on La₂O₃, Al₂O₃, YSZ and MgO. The influence of several parameters on the catalytic activity and selectivity is examined including reaction temperature, water-to-ethanol ratio and space velocity. Results reveal that the Ni/La₂O₃ catalyst exhibits high activity and selectivity toward hydrogen production and, most important, long term stability for steam reforming of ethanol. The enhanced stability of this catalyst may be due to scavenging of coke deposition on the Ni surface by lanthanum oxycarbonate species which exist on top of the Ni particles under reaction conditions.     

Ni-Mn/Al2O3催化剂在浆态床中CO甲烷化催化性能

采用共浸渍法制备了Ni-Mn/Al₂O₃催化剂,考察了助剂Mn的含量对催化剂结构及浆态床CO甲烷化性能的影响。采用XRD、H₂-TPR、BET、TEM、H₂-化学吸附等表征对催化剂进行了测试分析,结果表明,Mn助剂的引入能够促进Ni物种在载体表面的分散,减弱Ni物种与载体的相互作用,降低催化剂的还原温度,提高催化剂的比表面积,减小活性金属Ni的晶粒尺寸。随着Mn含量的增加,Ni-Mn/Al₂O₃催化剂的甲烷化性能先升后降,其中以Mn含量为4%（质量分数）时的催化甲烷化性能最佳,添加过量的Mn导致活性组分Ni被部分覆盖,催化甲烷化性能下降。通过对16Ni4Mn/Al₂O₃催化剂样品的浆态床反应温度及反应压力的研究发现,当反应温度为280℃、反应压力为1.5 MPa时,催化剂样品16Ni4Mn/Al₂O₃的CO转化率及CH₄选择性分别达到96.2%和88.8%。     

载体对镍基催化剂顺酐液相加氢性能的影响

分别以ZrO₂、SiO₂与Al₂O₃为载体,采用等体积浸渍法制备了Ni质量分数为15%的催化剂,考察了其催化顺酐液相加氢性能,并利用BET、XRD、H₂-TPR以及TPO-MS等表征手段对催化剂进行了详细表征。结果表明,随载体不同各催化剂的加氢活性及选择性存在较大差异,Ni/Al₂O₃催化剂的C=C键加氢活性最高,但其几乎没有C=O加氢活性,催化顺酐加氢主产物为丁二酸酐。Ni/ZrO₂催化剂具有最高的C=O加氢活性,催化顺酐加氢主产物为γ-丁内酯,在反应温度为483 K,氢气压力为5 MPa的条件下反应8 h时,Ni/ZrO₂催化剂的γ-丁内酯选择性达79.20%。催化剂的套用实验表明,Ni/ZrO₂与Ni/SiO₂催化剂具有高的使用稳定性,Ni/Al₂O₃催化剂则在套用过程中快速失活。顺酐加氢至γ-丁内酯的中间产物--丁二酸酐与催化剂间的相互作用是影响催化剂加氢选择性及使用稳定性的主要原因。     

Structure and reactivity of plasma treated Ni/Al2O3 catalyst for CO2 reforming of methane

The glow discharge plasma treated Ni/Al₂O₃ catalyst showed an excellent anti-coke property for CO₂ reforming of methane. Characterizations using X-ray powder diffraction (XRD), X-ray photoelectron spectroscopy (XPS), temperature programmed reduction (TPR), transmission electron microscopy (TEM), and CO adsorbed infrared spectroscopy (IR) were conducted to investigate the structure and reactivity of the plasma treated Ni/Al₂O₃ catalyst for CO₂ reforming of methane. It confirms that the plasma treatment of Ni precursor at room temperature followed by calcination thermally has a significant influence on the surface characteristics of the active phase. The plasma treated catalyst contains high concentration of close packed plane with improved Ni dispersion and enhanced Ni-alumina interaction, which lead to high catalytic activity and excellent resistance to formations of filamentous carbon and encapsulating carbon.     

助剂Ba对Pd/Al_2O_3和Pt/Al_2O_3催化剂的C1-C3烷烃催化燃烧性能的影响

通过浸渍法制备了Al_2O_3负载的Pd和Pt催化剂,考察催化剂的甲烷、乙烷和丙烷催化燃烧活性,以及助剂Ba对催化性能的影响。对于Pd/Al_2O_3催化剂,加入Ba使活性物种PdO颗粒变大和还原温度升高,形成更稳定的PdO活性物种,是Pd-Ba/Al_2O_3催化剂活性提升的主要原因。对于Pt/Al_2O_3催化剂,加入Ba助剂使活性物种Pt0含量降低,PtO_x与Al_2O_3载体相互作用增强,使PtO_x物种更难被还原为Pt~0,导致Pt-Ba/Al_2O_3催化剂活性降低。Pd和Pt催化剂催化烷烃氧化反应活性规律一致:丙烷乙烷甲烷。Pd/Al_2O_3催化剂有利于C—H键活化,Pt/Al_2O_3催化剂有利于C—C键活化。Pt/Al_2O_3催化剂对C1-C3烷烃氧化活性的差别明显大于Pd/Al_2O_3催化剂。Pt/Al_2O_3催化剂对碳比例高的烷烃活性更高。     

Control of the product ratio of CO2/(CO+CO2) and inhibition of catalyst deactivation for steam reforming of gasoline to produce hydrogen

Factors controlling the product ratio of CO₂/(CO+CO₂) and methods for inhibiting deactivation of catalyst for steam reforming of gasoline were studied. Syngas (H₂+CO) as major product was produced on Ni-Mo/Al₂O₃ and the major product on Ni-Re/Al₂O₃ was H₂ and CO₂ at the same reaction conditions. Hydrogen with a high CO₂/(CO+CO₂) ratio of about 92% was produced by coupling reaction of steam reforming and water gas shift on Ni-Re/Al₂O₃ catalyst at 805 K. The multifunctional activity of the bimetallic catalyst of Ni-Re/Al₂O₃ and the suitable reaction temperature were of crucial significance for the coupling reaction. Although no deactivation could be observed on both Ni-Mo/Al₂O₃ and Ni-Re/Al₂O₃ catalysts for steam reforming of sulfur-free fuels in about 200 h of time on stream, the activity and sulfur-tolerance of Ni-Re/Al₂O₃ was much better than the values of Ni-Mo/Al₂O₃ for steam reforming of sulfur-containing fuels because of the unique role of rhenium in the Ni-Re catalyst. The unique role of rhenium in Ni-Re catalyst was mainly because of alloying of rhenium with nickel to form bimetallic Ni-Re sites and interaction of rhenium with sulfur to form S-Re binds. The sulfur-tolerance of Ni-Re/Al₂O₃ for steam reforming of sulfur-containing gasoline was improved further by addition of a small amount of ZSM-5. The activity and sulfur-tolerance of Ni-Mo/Al₂O₃ was also enhanced by the addition of ZSM-5.     

Preparation and characterization of Ir-based catalysts on metallic supports for high-temperature steam reforming of methanol

Ir-based catalysts on heat-resisting foil supports with different washcoats were investigated for hydrogen production by high-temperature steam reforming of methanol. Al₂O₃, Ce_0.8Zr_0.2O₂–Al₂O₃, Ce_0.8Zr_0.2O₂/Al₂O₃ and Ce_0.8Zr_0.2O₂ coatings were prepared on the metallic supports and iridium was deposited on them as the active component. The samples were characterized by X-ray powder diffraction (XRD), ultrasonic vibration test, scanning electron microscope (SEM) and temperature-programmed reduction (TPR). The performance of the catalysts for steam reforming of methanol was evaluated with a fixed-bed reactor. It was found that the phase structure, the shape of the surface particles and the coating adherence were different from each other for the four kinds of coatings. The activities, selectivities and stabilities of these Ir-based catalysts on metallic supports were compared to select the optimal one for use in high-temperature methanol steam reforming. The results indicated that the Ir/Ce_0.8Zr_0.2O₂/Al₂O₃/FeCrAl catalyst showed better performance than the other catalysts, which is a promising candidate for hydrogen production via the methanol steam reforming process in Pd membrane reactors.     

Role of CeO2 in Ni/CeO2–Al2O3 catalysts for carbon dioxide reforming of methane

Ni catalysts supported on γ-Al₂O₃, CeO₂ and CeO₂–Al₂O₃ systems were tested for catalytic CO₂ reforming of methane into synthesis gas. Ni/CeO₂–Al₂O₃ catalysts showed much better catalytic performance than either CeO₂- or γ-Al₂O₃-supported Ni catalysts. CeO₂ as a support for Ni catalysts produced a strong metal–support interaction (SMSI), which reduced the catalytic activity and carbon deposition. However, CeO₂ had positive effect on catalytic activity, stability, and carbon suppression when used as a promoter in Ni/γ-Al₂O₃ catalysts for this reaction. A weight loading of 1–5 wt% CeO₂ was found to be the optimum. Ni catalysts with CeO₂ promoters reduced the chemical interaction between nickel and support, resulting in an increase in reducibility and stronger dispersion of nickel. The stability and less coking on CeO₂-promoted catalysts are attributed to the oxidative properties of CeO₂.