基于观测器的机械手神经网络自适应控制

提出了一种基于观测器的机械手神经网络自适应轨迹跟随控制器设计方法,这里机 械手的动力学非线性假设是未知的,并且假设机械手仅有关节角位置测量.文中采用一个线 性观测器重构机械手的关节角速度,用神经网络逼近修正的机械手动力学非线性,改进系统 的跟随性能.基于观测器的神经网络自适应控制器能够保证机械手角跟随误差和观测误差的 一致终结有界性以及神经网络权值的有界性,最后给出了机械手神经网络自适应控制器-观 测器设计的主要理论结果,并通过数字仿真验证了所提方法的性能.     

Neural network-based adaptive controller design of roboticmanipulators with an observer

A neural network (NN)-based adaptive controller with an observer is proposed for the trajectory tracking of robotic manipulators with unknown dynamics nonlinearities. It is assumed that the robotic manipulator has only joint angle position measurements. A linear observer is used to estimate the robot joint angle velocity, while NNs are employed to further improve the control performance of the controlled system through approximating the modified robot dynamics function. The adaptive controller for robots with an observer can guarantee the uniform ultimate bounds of the tracking errors and the observer errors as well as the bounds of the NN weights. For performance comparisons, the conventional adaptive algorithm with an observer using linearity in parameters of the robot dynamics is also developed in the same control framework as the NN approach for online approximating unknown nonlinearities of the robot dynamics. Main theoretical results for designing such an observer-based adaptive controller with the NN approach using multilayer NNs with sigmoidal activation functions, as well as with the conventional adaptive approach using linearity in parameters of the robot dynamics are given. The performance comparisons between the NN approach and the conventional adaptation approach with an observer is carried out to show the advantages of the proposed control approaches through simulation studies     

Nonsingular Terminal Sliding Mode Control of Robot Manipulators Using Fuzzy Wavelet Networks

This paper presents an adaptive nonsingular terminal sliding mode (NTSM) tracking control design for robotic systems using fuzzy wavelet networks. Compared with linear hyperplane-based sliding control, terminal sliding mode controller can provide faster convergence and higher precision control. Therefore, a terminal sliding controller combined with the fuzzy wavelet network, which can accurately approximate unknown dynamics of robotic systems by using an adaptive learning algorithm, is an attractive control approach for robots. In addition, the proposed learning algorithm can on-line tune parameters of dilation and translation of fuzzy wavelet basis functions and hidden-to-output weights. Therefore, a robust control law is used to eliminate uncertainties including the inevitable approximation errors resulted from the finite number of fuzzy wavelet basis functions. The proposed controller requires no prior knowledge about the dynamics of the robot and no off-line learning phase. Moreover, both tracking performance and stability of the closed-loop robotic system can be guaranteed by Lyapunov theory. Finally, the effectiveness of the fuzzy wavelet network-based control approach is illustrated through comparative simulations on a six-link robot manipulator     

A combined backstepping and small-gain approach to robust adaptive fuzzy control for strict-feedback nonlinear systems

In this paper, a robust adaptive tracking control problem is discussed for a general class of strict-feedback uncertain nonlinear systems. The systems may possess a wide class of uncertainties referred to as unstructured uncertainties, which are not linearly parameterized and do not have any prior knowledge of the bounding functions. The Takagi-Sugeno type fuzzy logic systems are used to approximate the uncertainties. A unified and systematic procedure is employed to derive two kinds of novel robust adaptive tracking controllers by use of the input-to-state stability (ISS) and by combining the backstepping technique and generalized small gain approach. One is the robust adaptive fuzzy tracking controller (RAFTC) for the system without input gain uncertainty. The other is the robust adaptive fuzzy sliding tracking controller (RAFSTC) for the system with input gain uncertainty. Both algorithms have two advantages, those are, semi-global uniform ultimate boundedness of adaptive control system in the presence of unstructured uncertainties and the adaptive mechanism with minimal learning parameterizations. Four application examples, including a pendulum system with motor, a one-link robot, a ship roll stabilization with actuator and a single-link manipulator with flexible joint, are used to demonstrate the effectiveness and performance of proposed schemes.     

Adaptive neural network output feedback control for flexible multi-link robotic manipulators

In this paper, a novel approach for adaptive control of flexible multi-link robots in the joint space is presented. The approach is valid for a class of highly uncertain systems with arbitrary but bounded dimension. The problem of trajectory tracking is solved through developing a stable inversion for robot dynamics using only joint angles measurement; then a linear dynamic compensator is utilised to stabilise the tracking error for the nominal system. Furthermore, a high gain observer is designed to provide an estimate for error dynamics. A linear in parameter neural network based adaptive signal is used to approximate and eliminate the effect of uncertainties due to link flexibilities and vibration modes on tracking performance, where the adaptation rule for the neural network weights is derived based on Lyapunov function. The stability and the ultimate boundedness of the error signals and closed-loop system is demonstrated through the Lyapunov stability theory. Computer simulations of the proposed robust controller are carried to validate on a two-link flexible planar manipulator.     

Two-stage adaptive robot position/force control using fuzzy reasoning and neural networks

Many studies have been performed on the position/force control of robot manipulators. Since the desired position and force required to realize certain tasks are usually designated in the operational space, the controller should adapt itself to an environment and generate the control force vector in the operational space. On the other hand, the friction of each joint of a robot manipulator is a serious problem since it impedes control accuracy. Therefore, the friction should be effectively compensated for in order to realize precise control of robot manipulators. Recently, soft computing techniques (fuzzy reasoning, neural networks and genetic algorithms) have been playing an important role in the control of robots. Applying the fuzzy-neuro approach (a combination of fuzzy reasoning and neural networks), learning/adaptation ability and human knowledge can be incorporated into a robot controller. In this paper, we propose a two-stage adaptive robot manipulator position/force control method in which the uncertain/unknown dynamic of the environment is compensated for in the task space and the joint friction is effectively compensated for in the joint space using soft computing techniques. The effectiveness of the proposed control method was evaluated by experiments.     

Robust dynamic surface control of flexible joint robots using recurrent neural networks

A robust neuro-adaptive controller for uncertain flexible joint robots is presented. This control scheme integrates H-infinity disturbance attenuation design and recurrent neural network adaptive control technique into the dynamic surface control framework. Two recurrent neural networks are used to adaptively learn the uncertain functions in a flexible joint robot. Then, the effects of approximation error and filter error on the tracking performance are attenuated to a prescribed level by the embedded H-infinity controller, so that the desired H-infinity tracking performance can be achieved. Finally, simulation results verify the effectiveness of the proposed control scheme.     

机器人自适应PID饱和输出反馈控制

针对机器人系统在仅有位置传感、驱动器饱和、存在建模不确定性及干扰等条件下的轨迹跟踪控制问题,提出了一种新的自适应PID控制方案。采用高精度滤波器估计机器人关节速度,采用带饱和函数的控制器限制输出力矩,采用自适应PID控制器补偿建模不确定性和干扰。通过Lyapunov直接法,证明系统的稳定性。最后以两关节机器人为例,给出仿真实验结果,验证了算法的有效性。     

考虑柔性关节的机械臂自适应运动控制策略研究

具有柔性关节的轻型机械臂因其自重轻、响应迅速、操作灵活等优点,取得了广泛应用;针对具有柔性关节的机械臂系统的关节空间轨迹跟踪控制系统动力学参数不精确的问题,提出一种结合滑模变结构设计的自适应控制器算法;通过自适应控制的思想对系统动力学参数进行在线辨识,并采用Lyapunov方法证明了闭环系统的稳定性;仿真结果表明,该控制策略保证了机械臂系统对期望轨迹的快速跟踪,具有良好的跟踪精度,系统具有稳定性。     

基于Lagrangian支持向量机的机械手鲁棒自适应控制

提出了一种基于Lagrangian支持向量机的不确定机械手鲁棒自适应控制方法。Lagrangian支持向量机采用梯度投影法学习机械手系统的未知部分,来对机械手系统进行非线性补偿。根据Lyapunov稳定性理论设计自适应律进一步在线调整支持向量机的参数,并叠加一个滑模控制项,以保证控制系统的稳定性和鲁棒性。对两关节机械手的仿真结果证明了以上控制方法的有效性。     

Robust control of robot manipulators with fast load adaptation

Many adaptive robot controllers have been proposed in the literature to solve manipulator trajectory tracking problems for high-speed operations in the presence of parameter uncertainties. However, most of these controllers stem from the applications of the existing adaptive control theory, which is traditionally focused on tracking slowly time-varying parameters. In fact, manipulator dynamics have fast transient processes for high-speed operations and load changes are abrupt. These observations motivate the present research to incorporate change detection techniques into self-tuning schemes for tracking abrupt load variations and achieving fast load adaptation. To this end, a robustly global stabilizing controller for a robot model with parametric and non-parametric uncertainies is developed based on the Lyapunov second method, and it is then made adaptive via the self-tuning regulator concept. The two-model approach to online change detection in load is used and the estimation algorithm is reinitialized once load changes are detected. This allows a much faster adaptive identification of load parameters than the ordinary forgetting factor approach. Simulation results demonstrate that the proposed controller achieves better tracking accuracy than the existing adaptive and non-adaptive controllers.     

Backstepping control of flexible joint manipulator based on hyperbolic tangent function with control input and rate constraints

In this paper, we investigate the trajectory tracking problems of the link angle and angle speed of the flexible joint manipulator model based on external disturbance, the control input and rate constraints. The controller of the flexible joint manipulator model is designed using the backstepping control scheme. To achieve this objective, the smooth hyperbolic tangent function is used to solve the problems of control input and rate constraints, and the stability is proved using Lyapunov function in the design procedure of the backstepping control scheme. Finally, the effectiveness of the proposed backstepping controller is verified by numerical simulation.     

Adaptive neural network control of flexible joint robots based on feedback linearization

A robust adaptive neural network controller is presented for flexible joint robots using feedback linearization techniques. The controller is based on an approach of using an additional neural network to provide adaptive enhancements to a bask fixed nonlinear controller which can be either neural-network-based or model-used. The weights of the additional neural network are updated on-line based on direct adaptive techniques. It is shown that if Gaussian radial basis function networks are used for the additional neural network, uniformly stable adaptation is assured and asymptotic tracking of the position reference signal is achieved. Intensive computer simulations on a two-link flexible joint robot have shown that the controller can belter handle dynamical model changes and parameter uncertainties than the conventional feedback linearization controller     

A hybrid learning/adaptive partial state feedback controller for RLED robot manipulators

In this paper, we present an adaptive partial state-feedback repetitive learning control algorithm for a rigid-link electrically-driven (RLED) robot manipulator actuated by brushed DC (BDC) motors. The proposed controller is designed to compensate for repeatable mechanical uncertainty via a learning control term while an adaptive control loop is used to compensate for parametric uncertainty in the electrical dynamics. The proposed controller guarantees semi-global asymptotic link position tracking while only requiring measurements of link position and electrical winding current (e.g. measurements of link velocity are not required).     

基于DSP/FPGA的反步法阻抗控制柔性关节机械臂

针对柔性关节机械臂与环境接触时的柔顺控制问题,提出一种反步法阻抗控制方法,并基于李雅普诺夫稳定性理论证明了控制器的稳定性.该方法是在建立柔性关节机器人模型的基础上,将李雅普诺夫函数选取与控制器设计相结合的一种回归设计方法.它从系统的最低阶次微分方程开始,逐步设计满足要求的虚拟控制,最终设计出真正的控制器.轨迹跟踪和阻抗控制实验结果表明,该方法是有效而可行的.     

基于PMSM驱动的柔性关节空间机械臂轨迹跟踪控制方法

针对目前柔性关节空间机械臂轨迹跟踪控制方法忽略了不同重力影响下的机械臂驱动力变化,导致柔性关节空间机械臂轨迹跟踪控制效果较差的问题,提出了基于PMSM驱动的柔性关节空间机械臂轨迹跟踪控制方法。基于构建PMSM驱动数学模型,采用PMSM的矢量控制方法,分析驱动力矩矢量。根据驱动力矩矢量分析结果,分析不同重力环境下有、无摩擦时的驱动力矩。构建柔性关节模型,分析其在不同重力环境下遇到的重力释放问题,使用自适应反演滑膜控制方法,设计控制率,保证机械臂能够按照既定的方向运动,使机械臂具有鲁棒性。根据柔性关节空间机械臂动力学特性,分析不同重力环境下基于PMSM驱动力矩,确定重力项是随之发生改变的。设计控制器,构建动力学模型,确保空间阶段能够最大限度跟踪运动轨迹。实验结果表明,所提方法X轴、Y轴的末端跟踪结果均与实际运动轨迹一致,误差为0。关节控制力矩在时间为3s时,出现了最大为0.5N.m的误差,说明所提方法的跟踪控制效果较好。     

Constrained motion control of flexible robot manipulators based on recurrent neural networks

In this paper, a neural network approach is presented for the motion control of constrained flexible manipulators, where both the contact force everted by the flexible manipulator and the position of the end-effector contacting with a surface are controlled. The dynamic equations for vibration of flexible link and constrained force are derived. The developed control, scheme can adaptively estimate the underlying dynamics of the manipulator using recurrent neural networks (RNNs). Based on the error dynamics of a feedback controller, a learning rule for updating the connection weights of the adaptive RNN model is obtained. Local stability properties of the control system are discussed. Simulation results are elaborated on for both position and force trajectory tracking tasks in the presence of varying parameters and unknown dynamics, which show that the designed controller performs remarkably well.     

Adaptive tracking control of rigid manipulators using only position measurements

This article presents a new approach to trajectory tracking control of uncertain rigid manipulators using only position measurements. The proposed control strategy is an adaptive scheme that is very general and computationally efficient, requires virtually no information regarding the manipulator dynamic model, and is implementable without calculation of the robot inverse dynamics or inverse kinematic transformations. It is shown that the controller ensures semiglobal uniform boundedness of all signals in the presence of bounded disturbances, and that the ultimate size of the tracking errors can be made arbitrarily small. Additionally, it is demonstrated that the proposed strategy can be used as the basis for developing controllers for “cascaded” robotic systems, such as manipulators with significant actuator dynamics or joint flexibility. The efficacy of this approach to manipulator control is illustrated through both computer simulations and hardware experiments. © 1997 John Wiley & Sons, Inc.     

Adaptive tracking control for robot manipulator

In this study, an adaptive control system is proposed for the tracking control of an n-link robot manipulator to achieve high-precision position control. The presentation of the adaptive control system is divided into three parts: a feedforward controller, a state feedback controller and an uncertainty alleviator. All on-line tuning algorithms in the adaptive control system are derived in the sense of Lyapunov stability analysis, so that system-tracking stability can be guaranteed in the closed-loop system whether the uncertainties occur. It has learning ability similar to intelligent control, but with a simpler control framework. Computer simulations of a three-link SCARA robot manipulator verify the validity of the proposed control strategy in the possible presence of uncertainties. The merits of the proposed control scheme are that not only can the stability of the controlled system be guaranteed, but also no constrained conditions and prior knowledge of the controlled plant are required in the design process.     

Fuzzy-Basis-Function-Network-Based $H_infty$ Tracking Control for Robotic Manipulators Using Only Position Feedback

This paper presents an H _infin fuzzy output-feedback tracking-control scheme for robotic manipulators without measuring joint velocities. The developed controller and observer are based on a fuzzy basis function network (FBFN), which is employed to approximate nonlinear functions in the dynamics of controller and observer. The FBFN-based observer that estimates joint velocities can remove the needs of full-state measurements. According to the inevitable approximation errors and external disturbances, an H _infin auxiliary control signal is used to suppress the effects of the uncertainties. Moreover, all parameters of the fuzzy basis functions (FBFs) and FBF-to-output weights can be tuned online. The proposed controller requires no prior knowledge about the dynamics of the robot manipulator and no offline learning phase. Finally, comparative simulations on a three-link robot manipulator are provided to illustrate the tracking performance of the H _infin FBFN-based output-feedback control approach.