Burgers方程的精确解

引入一个变换,将二阶非线性偏微分方程—Burgers方程降阶为一阶的非线性方程,再直接求解该方程,得出了Burgers方程精确解的新形式,并与已有结果完全吻合.这种方法也适合于求解其他非线性偏微分方程.     

求一类非线性偏微分方程精确解的简化试探函数法

利用试探函数法,将一个难于求解的非线性偏微分方程化为一个易于求解的代数方程,然后用待定系数法确定相应的常数,简洁地求得了一类非线性偏微分方程的精确解．将此方法应用到Burgers方程、KdV方程和KdV—Burgers方程,所得结果与已有结果完全吻合．本方法可望进一步推广用于求解其它非线性偏微分方程．     

非线性偏微分方程数值求解的自适应方法研究

对小波理论在偏微分方程数值求解中的应用进行深入研究的基础上,提出了一种自适应求解非线性偏微分方程的算法——小波最优有限差分法。并以非线性Burgers方程为例,分别用小波最优有限差分法和直线法对它进行数值求解,显示了小波最优有限差分法在数值求解非线性问题时的自适应性、高效性和可行性。     

用余弦微分求积法数值求解KdV—Burgers方程

采用余弦微分求积法（CDQM）对（1＋1）维非线性KdV—Burgers方程进行了数值求解．结果表明,所得数值解与方程的精确解相比具有明显的高精度且稳定性高,相对于其他常用方法,且公式简单,使用方便;计算量小,时间复杂性好．     

变系数广义KdV—Burgers方程的精确类孤子解

利用一种函数变换将变系数广义KdV—Burgers方程约化为非线性常微分方程（NLODE）．并由此NLODE出发获得变系数广义KdV—Burgers方程的若干精确类孤子解。由此可见,用这种方法还可以求解一大类变系数非线性演化方程。     

四阶高分辨率熵相容算法

针对一维Burgers方程和一维Euler方程组的数值求解问题,提出了一种四阶高分辨率熵相容算法。新算法时间方向采用半离散方式,空间方向应用四阶中心加权基本无振荡(CWENO)重构方法,数值通量引入Ismail通量函数,将新的四阶算法应用于静态激波问题、激波管问题以及强稀疏波问题的数值求解中,并将所得结果同准确解以及已有算法所得结果进行了分析与比较。数值结果表明:新算法计算结果正确、分辨率高,能够准确捕捉激波及稀疏波,并能有效避免膨胀激波的产生。新算法适用于准确解决一维Burgers方程和一维Euler方程组的数值求解问题。     

指数函数方法及其在非线性发展方程中的应用

在求解非线性发展方程时,指数函数方法是一种非常简洁有效的方法。用此方法求解了2+1维Burgers方程和2+1维KP方程,并且得到了一些新的精确解。     

广义空间分数阶Burgers方程的Legendre Galerkin-Chebyshev配置方法逼近

本文采用Legendre Galerkin-Chebyshev配置方法求解广义空间分数阶Burgers方程.该方法基于Legendre Galerkin变分形式,但是非线性项与右端源项采用Chebyshev-Gauss插值逼近.首先,通过在空间方向采用Legendre Galerkin-Chebyshev配置方法离散,时间方向采用leap-frog/Crank-Nicolson格式离散,得到了方程的全离散格式,其中非线性项能够显式计算.接着,给出了稳定性分析及L~2-范数下的误差估计.数值算例显示该方法的稳定性,高效性及易实现性.     

Burgers方程的精确孤立波解的符号计算

借助于符号计算Maple,给出了一种构造非线性波动方程行波解的直接代数方法,该方法的主要特点是充分利用Riccati方程.使用此方法得到Burgers方程的多组精确行波解,其中包括一些新的孤立波解,这种方法也适用于求解其它的非线性波动方程（组）.     

求解Cahn-Hilliard方程非线性项的两种数值格式对比

基于快速显式算子分裂方法,将Cahn-Hilliard方程与分子束外延(MBE)方程分裂为非线性与线性两个部分.对非线性部分,采用中心差分与半离散有限差分两种格式进行数值计算;线性部分通过拟谱方法进行精确求解.在两种格式下,通过对数值解的全局L~∞误差估计,比较分析了两种格式的数值解差异以及运行效率.对于Cahn-Hilliard方程与MBE方程,两种格式的数值解一致;对Cahn-Hilliard方程的数值求解,中心差分格式的效率是半离散有限差分格式的3到6倍;在MBE方程的数值求解中,半离散有限差分格式的效率是中心差分格式的2倍.     

Only connect: teaching, technology and telesis

Abstract This paper describes an approach to the design of interactive multimedia materials being developed in a European Community project. The developmental process is seen as a dialogue between technologists and teachers. This dialogue is often problematic because of the differences in training, experience and culture between them. Conditions needed for fruitful dialogue are described and the generic model for learning design used in the project is explained.     

European Community policy and the market

Abstract This paper starts with some reflections on the policy considerations and priorities which are shaping European Commission (EC) research programmes. Then it attempts to position the current projects which seek to capitalise on information and communications technologies for learning in relation to these priorities and the apparent realities of the marketplace. It concludes that while there are grounds to be optimistic about the contribution EC programmes can make to the efficiency and standard of education and training, they are still too technology driven.     

一种自适应子融合集成多分类器方法

融合集成方法已经广泛应用在模式识别领域,然而一些基分类器实时性能稳定性较差,导致多分类器融合性能差,针对上述问题本文提出了一种新的基于多分类器的子融合集成分类器系统。该方法考虑在度量层融合层次之上通过对各类基多分类器进行动态选择,票数最多的类别作为融合系统中对特征向量识别的类别,构成一种新的自适应子融合集成分类器方法。实验表明,该方法比传统的分类器以及分类融合方法识别准确率明显更高,具有更好的鲁棒性。     

Avoiding semantic and temporal gaps in developing software intensive systems

Development of software intensive systems (systems) in practice involves a series of self-contained phases for the lifecycle of a system. Semantic and temporal gaps, which occur among phases and among developer disciplines within and across phases, hinder the ongoing development of a system because of the interdependencies among phases and among disciplines. Such gaps are magnified among systems that are developed at different times by different development teams, which may limit reuse of artifacts of systems development and interoperability among the systems. This article discusses such gaps and a systems development process for avoiding them.     

Designing economic np control charts: A programmed simulation approach

This paper presents control charts models and the necessary simulation software for the location of economic values of the control parameters. The simulation program is written in FORTRAN, requires only 10K of main storage, and can run on most mini and micro computers. Two models are presented - one describes the process when it is operating at full capacity and the other when the process is operating under capacity. The models allow the product quality to deteriorate to a further level before an existing out-of-control state is detected, and they can also be used in situations where no prior knowledge exists of the out-of-control causes and the resulting proportion defectives.     

The development of robot art

Going through a few examples of robot artists who are recognized worldwide, we try to analyze the deepest meaning of what is called “robot art” and the related art field definition. We also try to highlight its well-marked borders, such as kinetic sculptures, kinetic art, cyber art, and cyberpunk. A brief excursion into the importance of the context, the message, and its semiotics is also provided, case by case, together with a few hints on the history of this discipline in the light of an artistic perspective. Therefore, the aim of this article is to try to summarize the main characteristics that might classify robot art as a unique and innovative discipline, and to track down some of the principles by which a robotic artifact can or cannot be considered an art piece in terms of social, cultural, and strictly artistic interest. This work was presented in part at the 13th International Symposium on Artificial Life and Robotics, Oita, Japan, January 31–February 2, 2008     

煤矿井下安全监控分站的设计及其仿真实现

为了设计一种具有低成本、低功耗、易操作、功能强且可靠性高的煤矿井下安全分站,针对煤矿安全生产实际,文章提出了采用MCS-51系列单片机为核心、具有CAN总线通信接口的煤矿井下安全监控分站的设计方案;首先给出煤矿井下安全监控分站的整体构架设计,然后着重阐述模拟量输入信号处理系统的设计过程,最后说明单片机最小系统及其键盘、显示、报警、通信等各个组成部分的设计;为验证设计方案的可行性与有效性,使用Proteus软件对设计内容进行仿真验证,设计的煤矿井下安全监控分站具有瓦斯、温度等模拟量参数超标报警功能和电机开停、风门开闭等开关量指示功能;仿真结果表明:设计的煤矿井下安全监控分站具有一定的实际应用价值.     

Explanation and prediction: an architecture for default and abductive reasoning

Although there are many arguments that logic is an appropriate tool for artificial intelligence, there has been a perceived problem with the monotonicity of classical logic. This paper elaborates on the idea that reasoning should be viewed as theory formation where logic tells us the consequences of our assumptions. The two activities of predicting what is expected to be true and explaining observations are considered in a simple theory formation framework. Properties of each activity are discussed, along with a number of proposals as to what should be predicted or accepted as reasonable explanations. An architecture is proposed to combine explanation and prediction into one coherent framework. Algorithms used to implement the system as well as examples from a running implementation are given.     

Three Process Perspectives: Organizations, Teams, and People

This paper provides the author's personal views and perspectives on software process improvement. Starting with his first work on technology assessment in IBM over 20 years ago, Watts Humphrey describes the process improvement work he has been directly involved in. This includes the development of the early process assessment methods, the original design of the CMM, and the introduction of the Personal Software Process (PSP)^SM and Team Software Process (TSP){^SM}. In addition to describing the original motivation for this work, the author also reviews many of the problems he and his associates encountered and why they solved them the way they did. He also comments on the outstanding issues and likely directions for future work. Finally, this work has built on the experiences and contributions of many people. Mr. Humphrey only describes work that he was personally involved in and he names many of the key contributors. However, so many people have been involved in this work that a full list of the important participants would be impractical.     

基于复小波噪声方差显著修正的SAR图像去噪

提出了一种基于复小波域统计建模与噪声方差估计显著性修正相结合的合成孔径雷达(Synthetic Aperture Radar,SAR)图像斑点噪声滤波方法。该方法首先通过对数变换将乘性噪声模型转化为加性噪声模型,然后对变换后的图像进行双树复小波变换(Dualtree Complex Wavelet Transform,DCWT),并对复数小波系数的统计分布进行建模。在此先验分布的基础上,通过运用贝叶斯估计方法从含噪系数中恢复原始系数,达到滤除噪声的目的。实验结果表明该方法在去除噪声的同时保留了图像的细节信息,取得了很好的降噪效果。