EPDM Elastomer and Biothermoplastic Polyester-based Silicate-layered Multifunctional Nanocomposites Incorporated with Poly(MA-alt-α-olefin)-g-APTS-SiO2 NPs and PP-g-MA by Reactive Extrusion Nanotechnology

Multifunctional polymer blend nanocomposites consisting EPDM elastomer as a matrix polymer, bioengineering polyesters (PLA and PCL), PP-g-MA compatibilizer and covalently encapsulated colloidal alternating reactive copolymer-g-γ-aminopropyl trimethoxysilane-silica nanoparticles as reactive compatibilizer nanofillers, and organoclay (reactive ODA-MMT and complexable DMDA-MMT) nanofillers were fabricated in melt by a one-step reactive extrusion nanotechnology. The effects of bioengineering polyesters and their molecular mass, origin of organology, and reactive PP-g-MA compatibilizer were evaluated. Unique nanostructures, lower particle sizes and crystallinity, SEM–TEM morphologies, higher thermal behaviors, good mechanical and rheological properties of thermoplastic multifunctional nanocomposites were evaluated.     

Structure and properties of polypropylene-based nanocomposites: Effect of PP-g-MA to organoclay ratio

The structure-property relationships of polypropylene (PP)-based nanocomposites prepared by melt processing have been investigated with a main focus on the ratio of polypropylene grafted with maleic anhydride (PP-g-MA) to organoclay. The morphological observations by transmission electron microscopy and X-ray diffraction are presented in conjunction with the mechanical, rheological and thermal expansion properties of these nanocomposites. Detailed morphological studies and subsequent quantitative particle analyses for the dispersed clay phase reveal that the aspect ratio of clay particles decreases as the amount of clay increases, and it increases as the amount of PP-g-MA increases. The rheological properties suggest that the extent of a percolation network can be enhanced by increasing the number of organoclay particles at a fixed ratio of PP-g-MA to organoclay and by increasing the degree of exfoliation at fixed clay content. However, mechanical and thermal expansion behaviors do not improve correspondingly in all cases because of the reduction of matrix properties by PP-g-MA. The reduction of the modulus and the increase in the expansion of the polymer matrix caused by the presence of PP-g-MA are compared to the prediction of the Chow model. Clearly, the amount of PP-g-MA added along with its lower crystallinity are important factors affecting the mechanical and thermal expansion properties of PP-based nanocomposites.     

Morphology and properties of polypropylene nanocomposites based on a silanized organoclay

A silanized organoclay (s-M₂(HT)₂) was prepared by reaction of trimethoxyphenyl silane with an organoclay with a M₂(HT)₂ surfactant structure. Nanocomposites were formed from polypropylene (PP) and a blend of PP and maleic anhydride-grafted polypropylene (PP-g-MA) and the M₂(HT)₂ and s-M₂(HT)₂ organoclays by melt processing to explore the extent of exfoliation and the mechanical properties. Wide angle X-ray scattering (WAXS) and transmission electron microscopy (TEM) coupled with detailed particle analysis were used to determine the effect of the organoclay used and the PP-g-MA compatibilizer on exfoliation and mechanical, rheological, and thermal expansion properties. The PP/s-M₂(HT)₂ nanocomposites have higher particle densities than the PP/M₂(HT)₂ nanocomposites though the aspect ratio remains the same. Platelet dispersion is significantly improved by using PP-g-MA compatibilizer for both organoclays. The rheological properties and the relative modulus improve for the PP/s-M₂(HT)₂ nanocomposites but not to the same degree as either organoclay in a PP-g-MA compatibilized matrix. The thermal expansion properties, however, are not improved by using the s-M₂(HT)₂ organoclay. The s-M₂(HT)₂ organoclay is less prone to agglomeration during extrusion than the M₂(HT)₂ organoclay.     

The Effect of Spray-Freeze Drying of Montmorillonite on the Morphology,Dispersion, and Crystallization in Polypropylene Nanocomposites

The spray-freeze drying (SFD) technique was applied to sonicated aqueous suspensions of spray-dried montmorillonite clay (MMT) to produce highly porous agglomerates (SFD-MMT). Both MMT (used as a reference) and SFD-MMT were subsequently incorporated in polypropylene (PP) via melt compounding to produce 2 wt % nanocomposites with and without maleic anhydride grafted polypropylene (PP-g-MA). Polypropylene nanocomposites containing SFD-MMT exhibited thinner silicate flake layers compared to large agglomerates in PP/MMT nanocomposites. SFD-MMT particles became even more finer in the presence of PP-g-MA (i.e., in PP/PP-g-MA /SFD-MMT) where it hindered PP crystallization instead of serving as nucleation sites for the PP crystallization during rapid cooling. SFD-MMT improved the thermal stability of PP/PP-g-MA by 30°C compared to only 5–8°C for MMT/nanocomposites. MMT acts as a heterogeneous nucleating agent in the nucleation-controlled PP nanocomposites, but the hindrance effect was observed for the PP/PP-g-MA with SFD-MMT. PP/PP-g-MA/SFD-MMT exhibited twice the edge surface energy as compared to PP/PP-g-MA/MMT. The incorporation of both types of MMT raised the tensile moduli of PP and PP/PP-g-MA, with no improvement in their tensile strength and a decrease in the elongation at break. The PP/PP-g-MA/SFD-MMT showed brittle failure. POLYM. ENG. SCI., 60:168–179, 2020. © 2019 Society of Plastics Engineers     

Dispersion of nanoclay into polypropylene with carbon dioxide in the presence of maleated polypropylene

The effect of maleic anhydride grafted polypropylene (PP-g-MA) on the mechanical and rheological properties of polypropylene (PP)–clay nanocomposites prepared with nanoclay expanded with CO₂ and direct melt blending was studied. The results from the studies of the mechanical properties, rheological properties, and transmission electron microscopy show that when PP-g-MA was combined with the technique that used CO₂, greater enhancements in the mechanical properties and degree of dispersion of nanoclay in PP were observed. Furthermore, yieldlike behavior in the viscosity and a tail in the low-frequency behavior of the elastic modulus was attributed to the reaction of PP-g-MA with the nanoclay surface and not exfoliation. A fairly well-dispersed morphology was observed for concentrations as high 6.8 wt % clay when the clay was expanded and mixed with CO₂. At this concentration, mechanical properties such as yield strength and modulus increased by as much as 13 and 69%, respectively, relative to the pure PP. Furthermore, the modulus of the composite samples prepared with PP-g-MA and CO₂ was some 15% higher than that of samples prepared by direct melt compounding (without the use of CO₂). © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Dynamic mechanical properties and morphology of polypropylene/maleated polypropylene blends

The dynamic mechanical properties of both homopolypropylene (PPVC)/Maleated Poly-propylene (PP-g-MA) and ethylene-propylene block copolymer (PPSC)/Maleated Poly-propylene (PP-g-MA) blends have been studied by using a dynamic mechanical thermal analyzer (PL-DMTA MKII) over a wide temperature range, covering a frequency zone from 0.3 to 30 Hz. With increasing content of PP-g-MA, α relaxation of both blends gradually shift to a lower temperature and the apparent activation energy ΔE_α increases. In PPVC/PP-g-MA blends, β relaxation shifts to a higher temperature as the content of PP-g-MA increases from 0 to 20 wt % and then change unobviously for further varying content of PP-g-MA from 20 to 35 wt %. On the contrary, in the PPSC/PP-g-MA blends β₁ relaxation, the apparent activation energy ΔE_β1 and β₂ relaxation are almost unchanged with blend composition, while ΔE_β2 increases with an increase of PP-g-MA content. In the composition range studied, storage modulus É value for PPSC/PP-g-MA blends decreases progressively between β₂ and α relaxation with increasing temperature, but in the region the increment for PPVC/PP-g-MA blends is independent of temperature. The flexural properties of PPVC/PP-g-MA blend show more obvious improvement on PP than one of PPSC/PP-g-MA blends. Scanning electron micrographs of fracture surfaces of the blends clearly demonstrate two-phase morphology, viz. the discrete particles homogeneously disperse in the continous phase, the main difference in the morphology between both blends is that the interaction between the particles and the continuous phase is stronger for for PPVC/PP-g-MA than for PPSC/PP-g-MA blend. By the correlation of the morphology with dynamic and mechanical properties of the blends, the variation of the relaxation behavior and mechanical properties with the componenet structure, blend composition, vibration frequency, and as well as the features observed in these variation are reasonably interpreted. © 1996 John Wiley & Sons, Inc.     

Effect of the ratio of maleated polypropylene to organoclay on the structure and properties of TPO-based nanocomposites. Part I: Morphology and mechanical properties

The structure-property relationships of thermoplastic olefin (TPO)-based nanocomposites prepared by melt processing are reported with a main focus on the ratio of maleic anhydride-grafted polypropylene (PP-g-MA) to organoclay. The morphological observations by transmission electron microscopy, atomic force microscopy, and X-ray diffraction are presented in conjunction with the mechanical and rheological properties of these nanocomposites. Detailed quantitative analyses of the dispersed clay particles revealed that the aspect ratio of clay particles decreased as clay content increased but increased as the amount of PP-g-MA increased. Analysis of the elastomer phase revealed that the aspect ratio of the elastomer phase increased in both cases. The presence of clay causes the elastomer particles to become highly elongated in shape and retards the coalescence of the elastomer particles. The modulus and yield strength are enhanced by increasing the PP-g-MA/organoclay ratios. High levels of toughness of the TPO can be maintained when moderate levels of (organoclay) MMT and PP-g-MA are used. The rheological properties suggested that the addition of clay particles and PP-g-MA has a profound influence on the long time stress relaxation of the TPO nanocomposites. Based on these analyses, it is clear that it is important to optimize the ratio of PP-g-MA and organoclay to obtain the desired balance of mechanical properties and processing characteristics for TPO nanocomposites.     

Aniline-Modified Polypropylene as a Compatibilizer in Polypropylene Carbon Nanotube Composites

Maleic anhydride-grafted polypropylene (PP-g-MA) was reacted with aniline (NH₂C₆H₅) to produce PP-g-NHC₆H₅ and used as a compatibilizer in polypropylene/carbon nanotube composites. Infrared spectroscopy (FTIR) and nuclear magnetic resonance confirmed the reaction between PP-g-MA and aniline. PP-g-NHC₆H₅ resulted a better compatibilizer than PP-g-MA, producing good dispersion and homogeneous distribution of the carbon nanotubes with less agglomerates, as observed by SEM analysis. Improved dispersion and distribution is assumed to be due to the π–π interactions between the –C₆H₅ ring in the prepared compatibilizer and the hexagonal carbon structure in the nanotubes. In addition, a higher degree of crystallinity (12%) was promoted, since it was favored by π–π interactions. This achieved higher crystallinity promoted an increase in tensile modulus, with only slight changes in tensile strength but with an adverse effect on elongation at break.     

Mechanical and morphological properties of elastomer-modified polypropylene/polyamide-6 blends

Polypropylene/polyamide-6 (70:30) blends, containing dispersed discrete polyamide-6 microphases as matrix reinforcement, represent attractive materials for engineering applications. In order to enhance impact resistance, ethene/propene (EPM) was incorporated as a second separately dispersed microphase using reactive blending technology. Blend morphologies were controlled by adding maleic-anhydride-grafted-polypropylene (PP-g-MA) as compatibilizer during melt processing, thus enhancing dispersion and interfacial adhesion of the polyamide-6 phase. With PP-g-MA volume fractions increasing from 2.5 to 10 vol %, much finer dispersions of discrete polyamide-6 with average domain sizes decreasing from 8 to 0.8 μm were obtained. When polyamide-6 and ethene/propene (EPM)-rubber are dispersed simultaneously in the polypropylene matrix, impact resistance was improved. The influence of PP-g-MA volume fraction and blend morphologies on mechanical properties such as Young's modulus, yield stress, notched Charpy impact resistance was investigated. The ternary polypropylene/polyamide-6/EPM blend properties were compared with those of binary polypropylene blends containing the equivalent volume fraction of EPM. © 1995 John Wiley & Sons, Inc.     

Morphological,thermal, and mechanical properties of polypropylene/polycarbonate blend

This work deals with the effect of compatibilizer on the morphological, thermal, rheological, and mechanical properties of polypropylene/polycarbonate (PP/ PC) blends. The blends, containing between 0 to 30 vol % of polycarbonate and a compatibilizer, were prepared by means of a twin-screw extruder. The compatibilizer was produced by grafting glycidyl methacrylate (GMA) onto polypropylene in the molten state. Blend morphologies were controlled by adding PP-g-GMA as compatibilizer during melt processing, thus changing dispersion and interfacial adhesion of the polycarbonate phase. With PP-g-GMA, volume fractions increased from 2.5 to 20, and much finer dispersions of discrete polycarbonate phase with average domain sizes decreased from 35 to 3 μm were obtained. The WAXD spectra showed that the crystal structure of neat PP was different from that in blends. The DSC results suggested that the degree of crystallization of PP in blends decreased as PC content and compatibilizer increased. The mechanical properties significantly changed after addition of PP-g-GMA. © 1997 John Wiley & Sons, Inc. J Appl Polym Sci 63: 1857–1863, 1997     

Polystyrene/Polyolefin Elastomer Blends Loaded with Halloysite Nanotubes: Morphological,Mechanical, and Gas Barrier Properties

Herein, a simple melt-blending method is utilized to disperse of halloysite nanotubes (HNTs) in polystyrene/polyolefin elastomer (PS/POE) blends. Based on morphological studies, the PS/POE/HNT nanocomposite containing up to 3 phr HNTs shows excellent nanofiller dispersion, while those filled with 5 phr HNTs exhibit nanofiller aggregation. To overcome the nanofiller aggregation issue, the polypropylene-grafted-maleic anhydride (PP-g-MA) compatibilizer is added to the PS/POE/HNT nanocomposite, which results in improved mechanical properties for the nanocomposite sheets. Furthermore, the addition of compatibilized HNTs to the PS/POE blends leads to decreased O₂ and N₂ gas permeabilities. Besides, incorporating POE, HNTs, and PP-g-MA leads to a decrease in water vapor transmission of PS. In the end, the experimentally-determined mechanical properties and gas permeabilities of the nanocomposite sheets are compared to those predicted by prevalent theoretical models, revealing a good agreement between the experimental and theoretical results. Molecular-dynamics simulations are also carried out to calculate the gas diffusion coefficients in the different sheets to further support the experimental findings in this study. Overall, the PS/POE/HNT/PP-g-MA nanocomposite sheets fabricated in this work demonstrate excellent mechanical and gas barrier properties; and hence, can be used as candidate packaging materials. However, the strength of the resulting PS/POE blend may be inferior to that of the virgin PS.     

Compatibilization effectiveness of maleated polypropylene compared to organoclay in PBT/PP blends

The compatibilization efficiency of a conventional compatibilizer (PP-grafted maleic anhydride) is compared with an organoclay of hydrophilic modifier (Cloisite 30B) in poly(butylene terephthalate)/polypropylene (PBT/PP) immiscible polymer blend. Moreover, the effect of PP-grafted maleic anhydride (PP-g-MA) on localization of Cloisite 30B organoclays is investigated, in this research. Accordingly, PBT/PP blends containing PP-g-MA, organoclay and PP-g-MA/organoclay are prepared by melt mixing method. According to morphological analysis, organoclays are more efficient than PP-g-MA in dispersion and distribution of droplets in PBT/PP blend. Additionally, the size of dispersed-droplets in PBT/PP/organoclay nanocomposite is lower than PBT/PP/PP-g-MA/organoclay sample. From X-ray diffractometry (XRD) and transmission electron microscopy illustrations, it is shown that organoclays represent the higher level of intercalation structure in PBT/PP/organoclay compared to PBT/PP/PP-g-MA/organoclay nanocomposite. PBT/PP/Organoclay nanocomposite indicates higher viscosity and elasticity in comparison with PBT/PP/PP-g-MA/organoclay, as well. The present subject can be explained by the role of PP-g-MA in transferring some parts of organoclays from PBT matrix into PP droplets which hinders the break-up of dispersed-droplets. According to non-linear viscoelastic properties, PBT/PP/organoclay sample shows stronger stress overshoots than PBT/PP/PP-g-MA/organoclay in start-up of shear flow. Modified De Kee-Turcotte model is studied to investigate the yield stress and viscoelastic behavior of different samples. PBT/PP/Organoclay nanocomposite shows higher yield stress compared to PBT/PP blend filled by PP-g-MA/organoclay system.     

Exfoliation targeted toughness enhancement in polypropylene‐blend‐ montmorillonite nanocomposites

BACKGROUND: Both exfoliated and toughened polypropylene‐blend‐montmorillonite (PP/MMT) nanocomposites were prepared by melt extrusion in a twin‐screw extruder. Special attention was paid to the enhancement of clay exfoliation and toughness properties of PP by the introduction of a rubber in the form of compatibilizer toughener: ethylene propylene diene‐based rubber grafted with maleic anhydride (EPDM‐g‐MA). RESULTS: The resultant nanocomposites were characterized using X‐ray diffraction, atomic force microscopy, scanning electron microscopy, thermogravimetric analysis, dynamic mechanical analysis and Izod impact testing methods. It was found that the desired exfoliated nanocomposite structure could be achieved for all compatibilizer to organoclay ratios as well as clay loadings. Moreover, a mechanism involving a decreased size of rubber domains surrounded with nanolayers as well as exfoliation of the nanolayers in the PP matrix was found to be responsible for a dramatic increase in impact resistance of the nanocomposites. CONCLUSION: Improved thermal and dynamic mechanical properties of the resultant nanocomposites promise to open the way for highly toughened super PPs via nanocomposite assemblies even with very low degrees of loading. Copyright © 2008 Society of Chemical Industry     

Comparing the compatibility of various functionalized polypropylenes with thermoplastic polyurethane (TPU)

Three functionalized polypropylenes (PP), a maleated PP (PP-g-MA), primary amine functionalized PP (PP-g-NH₂), and secondary amine functionalized PP (PP-g-NHR), were melt blended with a thermoplastic polyurethane (TPU) at different compositions. Compatibility of each functionalized PP with TPU was compared by investigating the binary blends using rheological (mixer torques, dynamic shear rheometry), thermal (dynamic mechanical analysis), mechanical (tensile test), and morphological (scanning electron microscopy with image analysis, particle size analysis) measurements. Compatibility of the three functionalized PP's with TPU is ranked in a decreasing order as follows: PP-g-NHR≥PP-g-NH₂?PP-g-MA, which is attributed to higher reactivity of amine (primary and secondary) with urethane linkages. Accordingly, the TPU blends with the two types of amine functionalized PP's exhibited much better synergy, as reflected by much improved mechanical properties including higher tensile strength and ultimate elongation, and finer and more stable morphologies.     

Melt compounding of syndiotactic polypropylene nanocomposites containing organophilic layered silicates and in situ formed core/shell nanoparticles

Syndiotactic polypropylene (sPP) compounds containing organophilic layered silicates were prepared by means of melt extrusion at 220 °C using a corotating twin screw extruder in order to examine the influence of the silicate modification and the addition of maleic-anhydride-grafted isotactic polypropylene (iPP-g-MA) as compatibilizer on morphology development and mechanical properties. Synthetic sodium fluoromica was used as water-swellable layered silicate, which was rendered organophilic by means of cation exchange with protonated octadecylamine. Only compounding of the modified silicate in conjunction with iPP-g-MA afforded exfoliation and dispersion of individual silicate layers, encapsulated in an iPP-g-MA shell, within the polypropylene matrix. Interlayer distance increased with increasing content and increasing molecular weight of the compatibilizer. The Young's modulus of the nanocomposite increased fivefold from 490 to 2640 MPa. This was attributed to silicate nanoreinforcement and nucleation of sPP crystallization via the iPP-g-MA shell of the dispersed organophilic silicate nanoparticles. The yield stress was increased to 29 MPa with respect to 16 MPa for the bulk sPP. Morphology and mechanical properties were examined as a function of the silicate—and compatibilizer content.     

Effectiveness of the preparation of maleic anhydride grafted poly (lactic acid) by reactive processing for poly (lactic acid)/carbon nanotubes nanocomposites

An effective strategy to increase the properties of poly (lactic acid) (PLA) is the addition of carbon nanotubes (CNT). In this work, aiming to improve the surface adhesion of PLA and CNT a new compatibilizer agent was prepared by reactive processing, PLA grafted maleic anhydride (PLA-g-MA) using benzoyl peroxide and maleic anhydride. The effectiveness of the PLA-g-MA as a compatibilizer agent was verified for PLA/PLA-g-MA/CNT nanocomposites. PLA and PLA-g-MA samples were characterized by Fourier transform infrared spectroscopy (FT-IR) to confirm the grafting reaction of maleic anhydride on PLA chains and by rheological analysis to prove the changes in the matrix PLA after the graphitization reaction. Thermal (differential scanning calorimetry and thermogravimetric analysis), mechanical tests (Izod impact strength and tensile test), and morphological characterization were used to verify the effect of the compatibilizer agent. The preparation of PLA-g-MA by reactive extrusion processing proved satisfactory and the nanocomposites presented good thermal and mechanical properties. The addition of the PLA-g-MA also contributed to the greater distribution of CNT and can be used as an alternative for the production of PLA/CNT nanocomposites.     

Effect of Layered Silicates on the Crystallinity and Mechanical Properties of HDPE/MMT Nanocomposite Blown Films

Summary The highdensitypolyethylene (HDPE)/montmorillonite (MMT) nanocomposites were prepared by melt blending using twin screw extruder with two step process. The master batches were manufactured by melt compounding with maleic anhydride grafted HDPE (HDPE-g-MAH) and MMT. The HPDE/MMT master batches were subsequently mixed with HDPE. The blown nanocomposite films were obtained by a single screw extruder attached film blowing and take-off unit. The MMT dispersion in the nanocomposite films was characterized by X-ray diffraction (XRD) and transmission electron microscope (TEM). The influence of MMT on the crystallinity, thermal properties and mechanical properties as a function of compatibilizer was investigated by differential scanning calorimetry (DSC), thermogravimetric analysis (TGA) and universal testing machine, respectively. X-ray and TEM images showed the partially exfoliated nanocomposites which have the 5:1 – 20:1 ratios of HPDE-g-MAH and MMT. The thermal and mechanical properties of nanocomposites were enhanced by increasing the contents of MMT and in the presence of compatibilizer.     

Effect of compatibilizer concentration on dynamic rheological behavior and morphology of thermoplastic starch/polypropylene blends

The reactive compatibilization of blends consisting polypropylene (PP) and thermoplastic starch (TPS) (70/30) with different portions of PP-grafted maleic anhydride (PP-g-MA) is carried out by melt mixing. The esterification reaction between the starch hydroxyl and the PP-g-MA groups proved by the FTIR leads to a compatibility improvement. The dynamic rheological properties, morphology, elongation at break, and the impact strength of the blends were studied. The SEM images show that increasing the compatibilizer concentration reduces the dispersed TPS droplet size. The generalized Zener model states that an elastic interface is established (minimum α value) and enables us to predict the dynamic rheological properties of our blends in a longer frequency range to where the current experimental limitation exists. The modified Cross model is implemented to confirm better adhesion between phases when 20 wt % PP-g-MA is used (minimum a_c value). The increase in the dynamic viscoelastic moduli at concentrations up to 20 wt % and the observed plateau at the elongation at break point at this concentration confirmed that this concentration is the optimum for the maximum stress transfer. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48742.     

The Study of Reactively Compatibilized mPPO/PP Blend Systems

Polymer blends of commercial polyphenylene oxide (mPPO) and polypropylene (PP) are immiscible and incompatible in blend system. Maleic anhydride-grafted-copolymer has been employed as in situ compatibilizer for the mPPO and PP blends. This copolymer contains reactive anhydride functional groups that were able to react with mPPO at [sbnd]CH₃ side methyl groups [sbnd]OH terminal groups under the melt conditions. The PP-g-MA copolymer reduces the interfacial tension between the two polymers and act as a bridge between them to make compatible. The blends have been characterized using FTIR, SEM, and its mechanical behavior.     

Polypropylene–clay micro/nanocomposites as fused deposition modeling filament: effect of polypropylene-g-maleic anhydride and organo-nanoclay as chemical and physical compatibilizers

Amongst various polymers used as fused deposition modeling filaments, polypropylene is one which undergoes rigorous shrinkage during printing. This is a drawback for 3D-printer process and related applications, and to overcome this hurdle, mostly, mineral fillers are utilized; however, this additive reduces mechanical properties. To enhance mechanical and shrinkage properties, unmodified clay sheets extracted from bentonite mineral were used as a reinforcing agent, polypropylene grafted maleic anhydride (PP-g-MA) and nanoclay were used as compatibilizers. The compounding was carried out by a twin-screw extruder rather than a single-screw extruder to procure filaments. Afterwards, with fused deposition modeling, dumb-bells and disks were produced for testing. Scanning electron microscopy was employed to examine the morphological feature and dispersion of nanoclay and montmorillonite in the composites. X-ray diffraction was also used to study the dispersion of the nanoclays. The composite disks and dumb-bells were fabricated with a 3D printer to evaluate their rheological properties. Our results showed that the complex viscosity decreased drastically due to aligning the polymer chains along the clay sheets. Mechanical property measurements revealed that the tensile modulus was improved by 60% compared to that of the PP.