Separation and Purification of Aloe Anthraquinones Using PEG/Salt Aqueous Two-Phase System

The anthraquinones were extracted from Curacao aloe leaves. Aqueous two-phase system (ATPS) of polyethylene glycol (PEG)/salt, coupled with spectrophotometry and high performance liquid chromatography (HPLC) were employed for the first time as an attractive alternative for the downstream processing of aloe anthraquinones, mainly for the removal of the impurities without additional steps. The influence factors such as molecular mass and concentration of PEG, type, and concentration of neutral salt, temperature, and pH on the phase partition behavior of ATPS had been studied. Under the optimal condition, the highest extraction yield 90.54% was obtained in PEG phase using PEG-6000/(NH₄)₂SO₄ system to a mass ratio of 2:1 at 40°C, pH 3.0 with 0.6 g sodium chloride added. The reverse extraction of anthraquinones from the PEG phase was achieved with a recovery of 70.15% by adjusting the pH. Meanwhile, the PEG could be recycled. The major components in aloe anthraquinones of aloe-emodin and chrysophanol were analyzed by HPLC before and after ATPS extraction process. Compared with conventional purification methods, this technique can be completed in one operation; besides it is low-cost and environmentally friendly.     

Partitioning of water-soluble vitamins in biodegradable aqueous two-phase systems: Electrolyte perturbed-chain statistical associating fluid theory predictions and experimental validation

Partition coefficients (K) of vitamins (riboflavin, nicotinic acid, nicotinamide, folic acid, cyanocobalamin) in aqueous two-phase systems (ATPS) composed by polyethylene glycol (PEG 4000, PEG 6000) and organic salt (sodium citrate and sodium tartrate) at T = 298.15 K and p = 1 bar have been studied. Data on liquid–liquid equilibria of the ATPS considered in this study have been taken from the literature (PEG-Na₃Citrate) or measured in this work (PEG-Na₂Tartrate) for PEG 4000 and PEG 6000 at T = 298.15 K and p = 1 bar. The experimental K values were validated by electrolyte perturbed-chain-statistical associating fluid theory predictions. The neutral cyanocobalamin has the highest K values among all studied vitamins at any ATPS studied in this work. This finding contrasted with expectations based on literature data which let assume that charged species have typically the highest K values in the considered ATPS. Thus, besides the typically strong charge–charge interactions especially specific forces (e.g., hydrogen bonding) explains the strong PEG-cyanocobalamin interaction resulting in the high K values.     

Recovery of value‐added globular proteins from tannery wastewaters using PEG – salt aqueous two‐phase systems

Leather processing involves discharge of high‐value soluble globular proteins in the wastewater. The recovery of value‐added products from the wastewaters is gaining more importance in the context of recovery of wealth from waste. The recovery of these globular proteins from tannery wastewater was selected as a practical model system to study the implementation of polyethylene glycol (PEG)‐sulfate aqueous two‐phase systems (ATPS). The partition coefficient of bovine serum albumin is comparable to that of soluble proteins from tannery wastewaters. The influence of concentration of polymer, salt, pH and temperature on the partitioning of soluble proteins from tannery wastewaters has been studied. The PEG6000 + sodium sulfate + water system provide better partitioning of these soluble proteins as compared to PEG6000 + ammonium sulfate system. The maximum protein recovery yield for PEG6000 + sodium sulfate + water system at 20 °C is 92.75%. The influence of temperature indicates the recovery of proteins from tannery wastewater to be better at lower temperature. The findings of these studies raise the potential application of ATPS processes for protein recovery from complex biological systems. Copyright © 2006 Society of Chemical Industry     

Improved recovery of B‐phycoerythrin produced by the red microalga Porphyridium cruentum

A simplified process for the primary recovery and purification of B‐phycoerythrin (BPE) from Porphyridium cruentum exploiting aqueous two‐phase systems (ATPS) and isoelectric precipitation was developed in order to reduce the number of unit operations and benefit from increased purity and yield of the protein product. Evaluation of the partitioning behaviour of BPE in polyethylene glycol (PEG)/sulphate, PEG/dextran and PEG/phosphate ATPS was carried out to determine under what conditions the BPE and contaminants concentrated into opposite phases. An additional stage of isoelectric precipitation at pH 4.0 after cell disruption resulted in an increase in purity of the target protein from the BPE crude extract and enhanced the performance of the subsequent ATPS. PEG1000/phosphate ATPS proved to be suitable after isoelectric precipitation for the recovery of highly purified (defined as absorbance ratio A_{545 nm}/A_{280 nm} > 4.0) BPE with a potential commercial value as high as US$ 50/mg. An ATPS extraction stage comprising 29.5% (w/w) PEG1000, 9.0% (w/w) phosphate, a volume ratio (V_r) equal to 1.0, a system pH of 7.0 and loaded with 40% (w/w) of the BPE extract generated by precipitation allowed BPE recovery with a purity of 4.1±0.2 and an overall product yield of 72% (w/w). The purity of BPE from the crude extract increased 5.9‐fold after isoelectric precipitation and ATPS. The results reported herein demonstrate the benefits of the practical application of isoelectric precipitation together with ATPS for the recovery and purification of BPE produced by P. cruentum as a first step in the development of a commercial purification process. Copyright © 2006 Society of Chemical Industry     

Impact of polyethylene glycol as additive on the formation and extraction behavior of ionic‐liquid based aqueous two‐phase system

Developing a novel Ionic‐liquid (IL) based aqueous two‐phase system (ATPS) with polyethylene glycol (PEG) as adjuvant for the separation of biomolecules is studied. This original work involves addition of various concentration of PEG (2000, 4000, and 6000 gr/mol) to 1‐butyl‐3‐methylimidazolium acetate+ potassium hydrogen phosphate ATPS to investigate their subsequent effect on phase diagrams and partitioning coefficient of α‐amylase. In another innovative aspect of this work, response surface methodology (RSM) based on three‐variable central composite design was employed to understand the effect of phase forming components on extraction studies of α‐amylase. The addition of small amount of PEG improved the partitioning coefficient of biomolecule. The effective excluded volume theory was applied to correlate the salting‐out ability. As a result, it can be stated that the proposed system can effectively be used in separation and purification studies instead of task specific ILs. © 2015 American Institute of Chemical Engineers AIChE J, 62: 264–274, 2016     

Purification of Glucose Oxidase and β‐Galactosidase by Partitioning in a PEG‐Salt Aqueous Two‐Phase System in the Presence of PEG‐Derivatives

Abstract

Purification of glucose oxidase from Aspergillus niger and that of β‐galactosidase from Kluyveromyces lactis have been attempted using poly(ethylene glycol) (PEG)‐sodium sulfate aqueous two phase system (ATPS) in the presence of PEG‐derivatives, i.e. PEG‐Coomassie brilliant blue G‐250 and PEG‐benzoate, PEG‐palmitate and PEG‐TMA, respectively. The enzymes showed poor partitioning towards the PEG phase in comparison with other proteins in ATPS containing no ligands. Selective partitioning of other proteins was observed towards the PEG phase in the presence of PEG‐benzoate and PEG‐palmitate enriching β‐galactosidase in the salt phase whereas in the case of glucose oxidase, PEG‐Coomassie brilliant blue G‐250 derivative worked as a better affinity ligand for other proteins. A 19‐fold purification was obtained with the PEG dye derivative after 5 stage cross extractions with 80% recovery of glucose oxidase and an enrichment factor upto ～7 for β‐galactosidase with the PEG‐TMA derivative. The interaction of PEG‐benzoate and PEG‐TMA ligands with the active site of β‐galactosidase has been evaluated by molecular modeling. The effect of the molecular weight of glucose oxidase on its partitioning was confirmed as the molecular simulation shows strong affinity interaction of PEG‐glucoside with the enzyme.     

PEG-400 Partitioning in the HCCD/PEG Process for Cs and Sr Recovery

Abstract

The properties of the chloro-protected cobalt bis(dicarbollide) anion in the acidic form (HCCD), and in the presence of polyethylene glycol (PEG-400), are well known for the recovery of Cs and Sr from acidic radioactive streams. In the early development of HCCD/PEG extraction processes, questions were raised regarding the ability to control the concentration of PEG-400 in the organic phase due to its high solubility in the aqueous process solutions relative to HCCD or the diluent. The purpose of this study was to quantify the partitioning behavior of PEG-400 under a wide variety of relevant process conditions. PEG distribution ratios (D _PEG ) were measured by equilibrium batch contacts between the organic and aqueous phases over a wide range of conditions using radiometric techniques with ¹⁴C labeled PEG-400 to monitor the behavior of the bulk material. The results vary dramatically from 0.1 < D_PEG < 50, indicate that the PEG phase transfer kinetics are rapid, and that the aqueous phase nitric acid concentration has minimal impact on PEG solubility. The molar concentration ratio of [HCCD]:[PEG] in the organic phase has the greatest impact on PEG solubility. This ratio should be maintained at [HCCD]:[PEG] greater than or equal to approximately 6 to minimize PEG losses from the organic phase.     

Extractive bioconversion of xylan for production of xylobiose and xylotriose using a PEG6000/sodium citrate aqueous two-phase system

Aqueous two-phase system (ATPS) was applied for extraction bioconversion of xylan by xylanase from Trichoderma viride. Phase diagrams for poly (ethylene glycol) (PEG) and sodium citrate were determined at room temperature. The ATPS composed of 12.99% (w/w) PEG6000 and 12.09% (w/w) sodium citrate was favorable for partition of xylanase and used for extraction bioconversion of xylan. Batch hydrolysis demonstrated that higher concentrations of xylobiose and xylotriose were obtained in the PEG6000/sodium citrate ATPS compared to those in the aqueous system. These results present the potential feasibility of production of xylo-oligosaccharides by extraction bioconversion in ATPS.     

Practical application of aqueous two‐phase systems for the development of a prototype process for c‐phycocyanin recovery from Spirulina maxima

A novel process for the recovery of c‐phycocyanin from Spirulina maxima exploiting aqueous two‐phase systems (ATPS), ultrafiltration and precipitation was developed in order to reduce the number of unit operations and benefit from an increased yield of the protein product. The evaluation of system parameters such as PEG molecular mass, concentration of PEG as well as salt, system pH and volume ratio was carried out to determine under which conditions the c‐phycocyanin and contaminants concentrate to opposite phases. PEG1450–phosphate ATPS proved to be suitable for the recovery of c‐phycocyanin because the target protein concentrated in the top phase whilst the cell debris concentrated in the bottom phase. A two‐stage ATPS process with a phase volume ratio (V_r) equal to 0.3, PEG1450 7% (w/w), phosphate 20% (w/w) and system pH of 6.5 allowed c‐phycocyanin recovery with a purity of 2.4 (estimated as the relationship of the 620 nm to 280 nm absorbances). The use of ultrafiltration (with a 30 kDa membrane cut‐off) and precipitation (with ammonium sulfate) resulted in a recovery process that produced a protein purity of 3.8 ± 0.1 and an overall product yield of 29.5% (w/w). The results reported here demonstrated the practical implementation of ATPS for the design of a prototype recovery process as a first step for the commercial purification of c‐phycocyanin produced by Spirulina maxima. © 2001 Society of Chemical Industry     

Recovery of Human Interferon Alpha-2b from Recombinant Escherichia coli by Aqueous Two-Phase System

Recovery of periplasmic human recombinant interferon alpha-2b (IFN-α2b) from Escherichia coli rosetta-gami2 (DE3) using a single-step polyethylene glycol (PEG)-potassium phosphate aqueous two-phase system (ATPS) was investigated in this study. The influences of system parameters including PEG molecular weight, tie-line length, volume ratio, crude stock loading, system pH, and sodium chloride (NaCl) concentration (%, w/w) were studied. The results showed that the optimum condition to obtain the high purification factor of IFN-α2b in a single step was achieved by ATPS composed of 4% (w/w) PEG 8000, 13% (w/w) potassium phosphate, 0.5% (w/w) NaCl, 10% (w/w) crude stock, and a system pH of 6.5. A purification factor of 26.3 and recovery yield of 40.7% were obtained from optimized ATPS.     

Separation of catalase from Amsonia orientalis with single step by aqueous two-phase partitioning system (ATPS)

Catalase from Amsonia orientalis was purified by ATPS, and its efficiency was compared against hydrophobic interaction chromatography. Activity recovery and purification fold of purified catalase by ATPS were examined under varying experimental conditions. The effects of various factors such as type of phase-forming salts, (PEG) mass, with their different concentrations, pH and temperature effects on partitioning were investigated. The highest activity recovery (156%) and purification fold (8.67) of catalase were obtained in the ATPS system containing 10% (g/g) PEG4000, 15% (g/g) Na₂SO₄ at pH 6.0 and room temperature. In hydrophobic interaction chromatography, the enzyme has been purified 12.54-fold with 57.5% recovery. The molecular weight of catalase was determined as 75 kDa by SDS-PAGE.     

Aqueous Two‐Phase Partitioning of Glucose Isomerase from Actinoplanes missouriensis in the Presence of PEG‐Derivatives and its Immobilization on Chitosan Beads

Abstract

Purification of glucose isomerase by its partitioning in a PEG‐salt aqueous two‐phase system (ATPS) in the presence of PEG derivatives has been studied. Selective partitioning of the proteins was observed towards the PEG phase containing PEG‐benzoate and PEG‐palmitate, enriching glucose isomerase in the salt phase. Cross‐current extraction in 4 stages in the presence of PEG‐palmitate gave an enrichment factor of ～5 for the enzyme. After initial purification with ATPS, glucose isomerase was immobilized on cross‐linked chitosan beads. The immobilized enzyme was stable over a wider pH range (5.2–9.0) and showed an optimum pH of 6.5     

The optimization of aqueous two‐phase extraction of lysozyme from crude hen egg white using response surface methodology

BACKGROUND: Aqueous two‐phase extraction is a versatile method for separating biological particles and macromolecules. In the present wok, the feasibility of using PEG 4000/potassium citrate aqueous two‐phase system (ATPS) for recovering and purifying lysozyme was investigated. Response surface methodology was used to determine an optimized ATPS for purification of lysozyme from crude hen egg white. RESULTS: Mathematical models concerning the purification of lysozyme from chicken egg white in polyethylene glycol 4000 (PEG 4000)/potassium citrate ATPS are established using response surface methodology. Screening experiments using fractional factorial designs show that the pH of the system significantly affects the recovery and purification of lysozyme. An optimized ATPS was proved to be at pH 5.5 and 30 °C and contained 18% (w/w) PEG, 16% (w/w) potassium citrate, 3.75% (w/w) potassium chloride (KCl). Under those conditions, the specific activity, purification factor and activity yield for lysozyme were 31100 U mg^?1, 21.11 and 103%, respectively. CONCLUSION: The PEG 4000/potassium citrate ATPS has the potential to be applied to establish bioprocesses for the primary recovery and partial purification of lysozyme. © 2012 Society of Chemical Industry     

金属螯合双水相亲和分配技术分离纳豆激酶的研究

利用金属螯合亲和双水相分配技术对纳豆激酶的分离纯化进行了研究。考察了双水相系统、聚合物的分子量和浓度、亲和配基加入量、pH值、相比以及生物质加入量等因素对亲和分配的影响。结果表明,双聚合物系统比聚合物／无机盐系统更有利于纳豆激酶亲和分配;pH值和亲和配基加入量是影响分配的关键因素。优化的分配条件为：2．6％聚乙二醇,20．2％羟丙基淀粉,5％亲和配基PEG-IDA—Cu(Ⅱ),相比12,pH8．2,发酵液加入量15％。分配系统放大到100g,仍保持一致的酶活收率(90％)和纯化因子(2.0)。设计了两次分配分离流程,纯化因子达到3．52,总收率为81％。     

Improving glutathione extraction from crude yeast extracts by optimizing aqueous two-phase system composition and operation conditions

PEG-Dextran and PEG-salt aqueous two-phase systems (ATPS) have been applied to separate glutathione (GSH) from crude yeast extracts. Single-factor experiments were carried out to determine the important factors influencing the partition coefficient and extraction yield. The effect of PEG molecular weight, phase-forming components, PEG and Dextran concentration, pH value, and temperature on the GSH partitioning behavior in ATPS was investigated. Three factors, Dextran concentration, pH value, and temperature, were confirmed to have significant influence on the partition coefficient and extraction yield. These factors were further analyzed with the aid of central composite rotatable design and response surface methodology. The optimal conditions for GSH extraction in the PEGDextran system were determined, including PEG molecular weight 6,000, 10% PEG concentration, 14% Dextran concentration, pH 5.2, and temperature 32 °C. A high extraction yield (83.55%) of GSH from crude yeast extracts was achieved under these optimized conditions. This work is very helpful for developing one efficient and cost-effective process for the separation and purification of GSH from yeast broths.     

Extraction of microbial transglutaminase from <Emphasis Type="Italic">Amycolatopsis</Emphasis> sp. fermentation broth using aqueous two-phase system

Partitioning of microbial transglutaminase (MTG) from Amycolatopsis sp. in the polyethylene glycol (PEG)/salt-based ATPS was investigated for the first time. The key parameters such as the molecular weight of PEG (PEG 600-6000), the type and concentration of phase-forming salt (ammonium sulfate or phosphates), the pH of system (pH 5.0-8.5), and the concentration of neutral salt (0-6% NaCl, w/w) were determined. The partition coefficient of the enzyme was not linear with PEG molecular weight; PEG1000 gave better yield than others. The concentration of PEG1000, ammonium sulfate and NaCl, and the system pH showed effects with different extents on specific activity (SA) and yield of the enzyme. In the ATPS of 26% w/w PEG 1000 and 19% w/w ammonium sulfate in the presence of 5% w/w NaCl and at pH 6.0, MTG was partitioned into the PEG-rich phase with a maximum yield of 86.51% and SA was increased to 0.83. The results of SDS-PAGE showed the MTG produced by the test strain differed from the enzymes reported before. Thus, this study proves that ATPS can be used as a preliminary step for partial purification of MTG from Amycolatopsis sp. fermentation broth.     

Partition of alkaline protease in aqueous two-phase systems of polyethylene glycol 1000 and potassium phosphate

This article presents a study of polyethylene glycol 1000 (PEG1000)/potassium phosphate aqueous two-phase systems (ATPSs) forBacillus subtilis NS99 alkaline protease extraction. The objectives were to evaluate effects of system pH (7.5, 8.5,9.5, and 10.5), and NaCl concentration (0,4,7, and 10% (w/w)) on ATPS binodal curves, effects of system pH, NaCl concentration, and tie-line length (TLL) on alkaline protease partition coefficient (K) and yield (Y%) at room temperature (30±2 ‡C). Casein hydrolysis was used for determination of alkaline protease activity. It was revealed that system pH had the slightest effect on locations of binodal curves (except at pH 10.5). In contrast, addition of NaCl appeared to have a significant effect on phase characteristics since binodal curves of systems with NaCl (4-10% (w/w)) shifted significantly towards the origin in comparison to the ones without NaCl. Increased NaCl concentration from 4 to 10% (w/w), however, showed trivial influence on locations of the binodal curves. Changes of system compositions due to variation in system pH, TLL, and NaCl concentrations obviously resulted in varied obtainable K and Y% of alkaline proteases. Longer TLL and higher pH generally resulted in higher K. In contrast, the lower NaCl concentration, the higher K. Since the same phase volume ration (1:1) was used throughout the experiments, Y% depended solely on K. The most suitable PEG1000/potassium phosphate ATPS was determined at pH 9.5, and comprised PEG1000, potassium phosphate, and NaCl 18.0,13.0, and 0% (w/w), respectively. This system resulted in considerably high K, and Y% of 20.0, and 95.1%, respectively. Information from this study will be important for further development of an ATPS extraction unit for alkaline protease recovery.     

Partition of tannery wastewater proteins in aqueous two-phase poly (ethylene glycol)-magnesium sulfate systems: Effects of molecular weights and pH

The partitioning behavior of soluble proteins from tannery wastewater using aqueous two-phase system (ATPS) was investigated. An ATPS polyethylene glycol (PEG)/MgSO₄ was examined with regard to the effects of PEG molecular weight (MW) and concentration, MgSO₄ concentration, pH and NaCl concentration on protein partition and extraction. The partition coefficients measured for soluble proteins were proportional to the difference in PEG concentration between the phases. The MW and concentration of PEG were found to have significant effects on protein partition and extraction with low MW PEG4000 showing the best conditions for the partitioning of protein in PEG+MgSO₄+water system. Sulfate salt was chosen as the phase-forming salt because of its ability to promote hydrophobic difference between the phases. This system was operated at room temperature . Increase in pH of the system increases the partition coefficient of proteins from tannery wastewater. The addition of sodium chloride showed significant influence on the partition coefficient. ATPS comprising PEG4000-magnesium sulfate provided a means for the recovery of proteins from tannery wastewater. The maximum percentage yield of protein extracted is 82.68%.     

Application of Response Surface Methodology for Optimization of Bromelain Extraction in Aqueous Two-Phase System

Extraction of bromelain from pineapple fruit in an aqueous two phase system (ATPS) composed of polyethylene glycol (PEG) 1500 and potassium phosphate has been studied using response surface methodology. The various process variables such as PEG, potassium phosphate and NaCl concentration, and pH were optimized using a central composite rotatable design (CCRD) of response surface methodology (RSM) based on the partition coefficient, % yield, and purification factor of an enzyme. An optimized ATPS composed of 14% (w/w) PEG 1500, 17.66% (w/w) potassium phosphate and 1 mM sodium chloride at pH 7.5 was used to purify bromelain from a pineapple fruit. With this system, a maximum enzyme partition coefficient of 12.62 and %yield of 90.33 in the top PEG-rich phase with a purification factor of 2.4 was predicted. The enzyme partition coefficient, % yield, and purification factor obtained from experimentation are 12.22, 89.65, and 2.8, respectively, in the top PEG phase. The response model is validated by the closeness between the predicted and experimental results.     

Partitioning behaviour of cephalexin and 7‐aminodeacetoxicephalosporanic acid in PEG/ammonium sulfate aqueous two‐phase systems

In order to develop an aqueous two‐phase system (ATPS) for cephalexin synthesis with extractive bioconversion, the partitioning behaviour of cephalexin and 7‐aminodeacetoxicephalosporanic acid (7‐ADCA) in poly(ethylene glycol) (PEG)/salt ATPS were examined. Parameters such as PEG size, salt type and tie line length were investigated to find a primary extraction system. In PEG400/ammonium sulfate and PEG400/magnesium sulfate systems, the partition coefficient of cephalexin (K_C) was larger than 1 while that of 7‐ADCA (K_A) deviated about 1.5. Addition of neutral salts, surfactants and water‐miscible solvents were also investigated in the primary ATPS in order to improve the separation efficiency. K_C greatly increased when neutral salts and surfactants were added to the PEG400/ammonium sulfate primary systems whereas K_A was only slightly higher than that of the additive‐free ATPS. In an improved ATPS for extractive bioconversion, consisting of PEG400 (20% w/w), ammonium sulfate (17.5% w/w), methanol (5% w/w) and NaCl (3% w/w), a K_C value of up to 15.2 was achieved; K_A was 1.8; K_P (partition coefficient of phenylglycine methyl ester) was 1.2 and the recovery yield of cephalexin was 94.2%. The results obtained from the extractive bioconversion of cephalexin in the improved ATPS showed that it is feasible to perform such an enzymatic process in an ATPS and the system offers the potential as a model for enzymatic synthesis of some water soluble products. © 2001 Society of Chemical Industry