Bovine serum albumin partitioning in polyethylene glycol (PEG)/potassium citrate aqueous two-phase systems

The extraction and back-extraction of bovine serum albumin (BSA) have been studied by liquid–liquid extraction with poly(ethylene glycol) (PEG)/potassium citrate aqueous two-phase system (ATPS). In this work, the ATPS was examined with regard to the effects of PEG molecular weight (PEG 1000, 2000, 4000 and 6000), PEG and potassium citrate concentration, BSA concentration (C_BSA) and pH on BSA partition. The pH was found to have significant effects on BSA partition with low molecular weight PEG 1000. The yield of the BSA, 99%, was obtained in the top phase under the following conditions: 19% (w/w) PEG 1000, 20% (w/w) potassium citrate and 0.75 mg/g C_BSA at pH 7.0 and 30 °C. BSA can be re-extracted to a new citrate phase by decreasing the pH of the system with a 92% yield. The back-extraction not only separates the BSA from the polymer, but also allows the polymer to be recycled. The global yield (Y_e + Y_be) is up to 91%.     

Liquid-liquid extraction of protease from cold-adapted yeast Rhodotorula mucilaginosa L7 using biocompatible and biodegradable aqueous two-phase systems

This work aimed to optimize the extraction of an extracellular protease produced by the cold-adapted yeast Rhodotorula mucilaginosa L7 using aqueous two-phase systems (ATPS) comprising polyethylene glycol (PEG) and sodium citrate or sodium tartrate. First, the biocompatibility of the phase forming agents was assessed. The results obtained with PEG-2000, PEG-4000, and PEG-6000 demonstrated that even at large PEG concentrations (32 wt%) the protease maintains its activity after 3 h of reaction, whereas an increase in salt concentration provokes a gradual decrease in protease stability. Subsequently, the partitioning of the protease in both types of ATPS was assessed, evaluating the effect of temperature, molecular weight, and concentration of PEG on protease purification, using two 2³-full factorial designs. The best partitioning conditions were obtained in PEG-6000/sodium tartrate-based ATPS, at 30ºC (with a yield of 81.09 ± 0.66% and a purification factor of 2.51 ± 0.03). Thus, considering the biodegradable characteristics of the system, the PEG/sodium tartrate ATPS is a viable and economic low-resolution step in protease purification, with a strong potential for future industrial application.     

Partitioning behaviour of cephalexin and 7‐aminodeacetoxicephalosporanic acid in PEG/ammonium sulfate aqueous two‐phase systems

In order to develop an aqueous two‐phase system (ATPS) for cephalexin synthesis with extractive bioconversion, the partitioning behaviour of cephalexin and 7‐aminodeacetoxicephalosporanic acid (7‐ADCA) in poly(ethylene glycol) (PEG)/salt ATPS were examined. Parameters such as PEG size, salt type and tie line length were investigated to find a primary extraction system. In PEG400/ammonium sulfate and PEG400/magnesium sulfate systems, the partition coefficient of cephalexin (K_C) was larger than 1 while that of 7‐ADCA (K_A) deviated about 1.5. Addition of neutral salts, surfactants and water‐miscible solvents were also investigated in the primary ATPS in order to improve the separation efficiency. K_C greatly increased when neutral salts and surfactants were added to the PEG400/ammonium sulfate primary systems whereas K_A was only slightly higher than that of the additive‐free ATPS. In an improved ATPS for extractive bioconversion, consisting of PEG400 (20% w/w), ammonium sulfate (17.5% w/w), methanol (5% w/w) and NaCl (3% w/w), a K_C value of up to 15.2 was achieved; K_A was 1.8; K_P (partition coefficient of phenylglycine methyl ester) was 1.2 and the recovery yield of cephalexin was 94.2%. The results obtained from the extractive bioconversion of cephalexin in the improved ATPS showed that it is feasible to perform such an enzymatic process in an ATPS and the system offers the potential as a model for enzymatic synthesis of some water soluble products. © 2001 Society of Chemical Industry     

The optimization of aqueous two‐phase extraction of lysozyme from crude hen egg white using response surface methodology

BACKGROUND: Aqueous two‐phase extraction is a versatile method for separating biological particles and macromolecules. In the present wok, the feasibility of using PEG 4000/potassium citrate aqueous two‐phase system (ATPS) for recovering and purifying lysozyme was investigated. Response surface methodology was used to determine an optimized ATPS for purification of lysozyme from crude hen egg white. RESULTS: Mathematical models concerning the purification of lysozyme from chicken egg white in polyethylene glycol 4000 (PEG 4000)/potassium citrate ATPS are established using response surface methodology. Screening experiments using fractional factorial designs show that the pH of the system significantly affects the recovery and purification of lysozyme. An optimized ATPS was proved to be at pH 5.5 and 30 °C and contained 18% (w/w) PEG, 16% (w/w) potassium citrate, 3.75% (w/w) potassium chloride (KCl). Under those conditions, the specific activity, purification factor and activity yield for lysozyme were 31100 U mg^?1, 21.11 and 103%, respectively. CONCLUSION: The PEG 4000/potassium citrate ATPS has the potential to be applied to establish bioprocesses for the primary recovery and partial purification of lysozyme. © 2012 Society of Chemical Industry     

Aqueous two-phase countercurrent distribution for the separation of c-phycocyanin and allophycocyanin from Spirulina platensis

C-phycocyanin (C-PC) and allophycocyanin (APC) with similar molecular structures were separated, respectively from Spirulina platensis cell homogenate by single extraction and multi-stage countercurrent distribution (CCD) using an aqueous two-phase system (ATPS) composed of polyethylene glycol (PEG) and potassium phosphate (KPi). The partition coefficients of C-PC and APC were 10.64 and 0.57, respectively, and the extraction selectivity of C-PC was 18.67 from 0.5% (w/w) S. platensis crude extract by single extraction using PEG6000/KPi ATPS (pH 7.0) with 34% (w/w) tie line length (TLL). In ten-stage CCD under the same ATPS extraction condition with 2% (w/w) S. platensis crude extract, the purity of C-PC increased nearly twice and the recovery of APC increased more than nine-fold compared with single extraction. The results displayed that most C-PC (82.1%) followed the mobile phase was enriched in the top phases of the last three tubes, while more APC (41%) remained in the stationary phase was enriched in the bottom phases of the first three tubes in the ten-stage CCD. Hence, aqueous two-phase CCD technology provided an effective and low cost method for C-PC and APC separation from S. platensis cell homogenate directly.     

Extraction of microbial transglutaminase from <Emphasis Type="Italic">Amycolatopsis</Emphasis> sp. fermentation broth using aqueous two-phase system

Partitioning of microbial transglutaminase (MTG) from Amycolatopsis sp. in the polyethylene glycol (PEG)/salt-based ATPS was investigated for the first time. The key parameters such as the molecular weight of PEG (PEG 600-6000), the type and concentration of phase-forming salt (ammonium sulfate or phosphates), the pH of system (pH 5.0-8.5), and the concentration of neutral salt (0-6% NaCl, w/w) were determined. The partition coefficient of the enzyme was not linear with PEG molecular weight; PEG1000 gave better yield than others. The concentration of PEG1000, ammonium sulfate and NaCl, and the system pH showed effects with different extents on specific activity (SA) and yield of the enzyme. In the ATPS of 26% w/w PEG 1000 and 19% w/w ammonium sulfate in the presence of 5% w/w NaCl and at pH 6.0, MTG was partitioned into the PEG-rich phase with a maximum yield of 86.51% and SA was increased to 0.83. The results of SDS-PAGE showed the MTG produced by the test strain differed from the enzymes reported before. Thus, this study proves that ATPS can be used as a preliminary step for partial purification of MTG from Amycolatopsis sp. fermentation broth.     

Separation and Purification of Aloe Anthraquinones Using PEG/Salt Aqueous Two-Phase System

The anthraquinones were extracted from Curacao aloe leaves. Aqueous two-phase system (ATPS) of polyethylene glycol (PEG)/salt, coupled with spectrophotometry and high performance liquid chromatography (HPLC) were employed for the first time as an attractive alternative for the downstream processing of aloe anthraquinones, mainly for the removal of the impurities without additional steps. The influence factors such as molecular mass and concentration of PEG, type, and concentration of neutral salt, temperature, and pH on the phase partition behavior of ATPS had been studied. Under the optimal condition, the highest extraction yield 90.54% was obtained in PEG phase using PEG-6000/(NH₄)₂SO₄ system to a mass ratio of 2:1 at 40°C, pH 3.0 with 0.6 g sodium chloride added. The reverse extraction of anthraquinones from the PEG phase was achieved with a recovery of 70.15% by adjusting the pH. Meanwhile, the PEG could be recycled. The major components in aloe anthraquinones of aloe-emodin and chrysophanol were analyzed by HPLC before and after ATPS extraction process. Compared with conventional purification methods, this technique can be completed in one operation; besides it is low-cost and environmentally friendly.     

Recovery of Human Interferon Alpha-2b from Recombinant Escherichia coli by Aqueous Two-Phase System

Recovery of periplasmic human recombinant interferon alpha-2b (IFN-α2b) from Escherichia coli rosetta-gami2 (DE3) using a single-step polyethylene glycol (PEG)-potassium phosphate aqueous two-phase system (ATPS) was investigated in this study. The influences of system parameters including PEG molecular weight, tie-line length, volume ratio, crude stock loading, system pH, and sodium chloride (NaCl) concentration (%, w/w) were studied. The results showed that the optimum condition to obtain the high purification factor of IFN-α2b in a single step was achieved by ATPS composed of 4% (w/w) PEG 8000, 13% (w/w) potassium phosphate, 0.5% (w/w) NaCl, 10% (w/w) crude stock, and a system pH of 6.5. A purification factor of 26.3 and recovery yield of 40.7% were obtained from optimized ATPS.     

Optimization of recovery of esterase from Serratia marcescens using combination of the solvent impregnated resin and aqueous two-phase extraction techniques

ABSTRACT

The performance of tunable aqueous polymer phase impregnated resins (TAPPIR) which is the combination of the solvent impregnated resin principle and an aqueous two-phase system for the separation of esterase from Serratia marcescens was evaluated in this study. Different molecular weight of polyethylene glycol (PEG) (2000, 4000 and 6000) at concentration ranging from 5% to 20% (w/w) and potassium citrate were used to construct the aqueous phase in TAPPIR technology. Optimum composition of PEG and salt for esterase partitioning was determined using response surface methodology. The optimum condition for the purification of esterase was impregnation of 25% (w/w) of PEG 2000 into 4 mm porous glass beads and extraction of esterase using 15% (w/w) potassium citrate at pH 8 containing 12% (w/w) crude loading with the addition of 4% (w/w) NaCl. Esterase from S. marcescens was successfully purified by the TAPPIR technology up to 5.32 of purification factor with a yield of 75.98%.     

Partition of tannery wastewater proteins in aqueous two-phase poly (ethylene glycol)-magnesium sulfate systems: Effects of molecular weights and pH

The partitioning behavior of soluble proteins from tannery wastewater using aqueous two-phase system (ATPS) was investigated. An ATPS polyethylene glycol (PEG)/MgSO₄ was examined with regard to the effects of PEG molecular weight (MW) and concentration, MgSO₄ concentration, pH and NaCl concentration on protein partition and extraction. The partition coefficients measured for soluble proteins were proportional to the difference in PEG concentration between the phases. The MW and concentration of PEG were found to have significant effects on protein partition and extraction with low MW PEG4000 showing the best conditions for the partitioning of protein in PEG+MgSO₄+water system. Sulfate salt was chosen as the phase-forming salt because of its ability to promote hydrophobic difference between the phases. This system was operated at room temperature . Increase in pH of the system increases the partition coefficient of proteins from tannery wastewater. The addition of sodium chloride showed significant influence on the partition coefficient. ATPS comprising PEG4000-magnesium sulfate provided a means for the recovery of proteins from tannery wastewater. The maximum percentage yield of protein extracted is 82.68%.     

Partitioning of water-soluble vitamins in biodegradable aqueous two-phase systems: Electrolyte perturbed-chain statistical associating fluid theory predictions and experimental validation

Partition coefficients (K) of vitamins (riboflavin, nicotinic acid, nicotinamide, folic acid, cyanocobalamin) in aqueous two-phase systems (ATPS) composed by polyethylene glycol (PEG 4000, PEG 6000) and organic salt (sodium citrate and sodium tartrate) at T = 298.15 K and p = 1 bar have been studied. Data on liquid–liquid equilibria of the ATPS considered in this study have been taken from the literature (PEG-Na₃Citrate) or measured in this work (PEG-Na₂Tartrate) for PEG 4000 and PEG 6000 at T = 298.15 K and p = 1 bar. The experimental K values were validated by electrolyte perturbed-chain-statistical associating fluid theory predictions. The neutral cyanocobalamin has the highest K values among all studied vitamins at any ATPS studied in this work. This finding contrasted with expectations based on literature data which let assume that charged species have typically the highest K values in the considered ATPS. Thus, besides the typically strong charge–charge interactions especially specific forces (e.g., hydrogen bonding) explains the strong PEG-cyanocobalamin interaction resulting in the high K values.     

双水相体系酶法合成L-苯丙氨酸的研究

以天冬氨酸转氨酶为催化剂,开展了双水相体系中苯丙酮酸转氨反应制备L-苯丙氨酸的研究。双水相体系质量组成为聚乙二醇4 000(20%)/Na2HPO4(16%)。苯丙酮酸钠盐、细胞和L-苯丙氨酸在双水相体系中的分配系数分别为8.03,31.7和0.74。当底物浓度为43.4 g/L时,该体系酶法合成L-苯丙氨酸得率为78.1%,比在水溶液体系中提高了27.4%。     

Recovery of value‐added globular proteins from tannery wastewaters using PEG – salt aqueous two‐phase systems

Leather processing involves discharge of high‐value soluble globular proteins in the wastewater. The recovery of value‐added products from the wastewaters is gaining more importance in the context of recovery of wealth from waste. The recovery of these globular proteins from tannery wastewater was selected as a practical model system to study the implementation of polyethylene glycol (PEG)‐sulfate aqueous two‐phase systems (ATPS). The partition coefficient of bovine serum albumin is comparable to that of soluble proteins from tannery wastewaters. The influence of concentration of polymer, salt, pH and temperature on the partitioning of soluble proteins from tannery wastewaters has been studied. The PEG6000 + sodium sulfate + water system provide better partitioning of these soluble proteins as compared to PEG6000 + ammonium sulfate system. The maximum protein recovery yield for PEG6000 + sodium sulfate + water system at 20 °C is 92.75%. The influence of temperature indicates the recovery of proteins from tannery wastewater to be better at lower temperature. The findings of these studies raise the potential application of ATPS processes for protein recovery from complex biological systems. Copyright © 2006 Society of Chemical Industry     

Improved recovery of B‐phycoerythrin produced by the red microalga Porphyridium cruentum

A simplified process for the primary recovery and purification of B‐phycoerythrin (BPE) from Porphyridium cruentum exploiting aqueous two‐phase systems (ATPS) and isoelectric precipitation was developed in order to reduce the number of unit operations and benefit from increased purity and yield of the protein product. Evaluation of the partitioning behaviour of BPE in polyethylene glycol (PEG)/sulphate, PEG/dextran and PEG/phosphate ATPS was carried out to determine under what conditions the BPE and contaminants concentrated into opposite phases. An additional stage of isoelectric precipitation at pH 4.0 after cell disruption resulted in an increase in purity of the target protein from the BPE crude extract and enhanced the performance of the subsequent ATPS. PEG1000/phosphate ATPS proved to be suitable after isoelectric precipitation for the recovery of highly purified (defined as absorbance ratio A_{545 nm}/A_{280 nm} > 4.0) BPE with a potential commercial value as high as US$ 50/mg. An ATPS extraction stage comprising 29.5% (w/w) PEG1000, 9.0% (w/w) phosphate, a volume ratio (V_r) equal to 1.0, a system pH of 7.0 and loaded with 40% (w/w) of the BPE extract generated by precipitation allowed BPE recovery with a purity of 4.1±0.2 and an overall product yield of 72% (w/w). The purity of BPE from the crude extract increased 5.9‐fold after isoelectric precipitation and ATPS. The results reported herein demonstrate the benefits of the practical application of isoelectric precipitation together with ATPS for the recovery and purification of BPE produced by P. cruentum as a first step in the development of a commercial purification process. Copyright © 2006 Society of Chemical Industry     

Development and Evaluation of PEG-Lithium Citrate Salt Based Aqueous Two Phase System and Its Application in Partitioning of Proteins from Fish Industry Effluent

A aqueous two phase system (ATPS) comprising of PEG (Average mol. Wt: 4000, 6000, 8000) – lithium citrate salt-water systems were studied. The basic studies like binodal curve data generation and equilibrium studies were carried out. Furthermore, the binodal model and Othmer-Tobias and Bancroft models for phase equilibria were used for reproducing the experimental binodal data and phase equilibrium composition data, respectively. Good agreement was obtained with the experimental binodal data and tie line data with the models. The effective excluded volume values were obtained from the binodal model for the present ATPS. The tie line length was determined through the phase equilibrium composition data. This system was used to partition crude proteins of the fish industry effluent. The effects of PEG and salt weight fraction in terms of tie line length and effective excluded volume on partitioning coefficient of crude protein were studied in detail. From the results it was observed that, the crude proteins present in the fish effluent were partitioned in the PEG rich phase and the maximum partition coefficient of 7.82 was obtained. The results are discussed in the context of practical potential of this citrate based ATPS in separating crude proteins from fish industry effluent.     

Aqueous two‐phase systems for the recovery of a recombinant viral coat protein from Escherichia coli

In this study the use of an aqueous two‐phase system (ATPS) following the direct chemical extraction of a recombinant viral coat protein, from the cytoplasm of Escherichia coli, is evaluated. The driving force is the need to establish an economically‐viable process for the manufacture of a vaccine against human papilloma infection. The partition behaviour of recombinant L1 protein, the major structural protein of the virus, and DNA was investigated in a polyethylene glycol (PEG)–phosphate system. An evaluation of system parameters including PEG molecular mass and the concentrations of PEG and phosphate was conducted, to estimate conditions under which the L1 protein and DNA partition to opposite phases. ATPS extraction comprising a volume ratio of 1.00, PEG 1000 (18.0%(w/w)) and phosphate (15.0%(w/w)) provided the conditions for accumulation of DNA into the bottom phase and concentration of L1 protein into the opposite phase (ie partition coefficient of DNA; ln K_DNA < 0.0 and partition coefficient of L1; ln K_L1 > 2.5). The findings reported here demonstrate the potential of ATPS to recover recombinant protein released from E coli by direct chemical extraction. © 2002 Society of Chemical Industry     

Partition of alkaline protease in aqueous two-phase systems of polyethylene glycol 1000 and potassium phosphate

This article presents a study of polyethylene glycol 1000 (PEG1000)/potassium phosphate aqueous two-phase systems (ATPSs) forBacillus subtilis NS99 alkaline protease extraction. The objectives were to evaluate effects of system pH (7.5, 8.5,9.5, and 10.5), and NaCl concentration (0,4,7, and 10% (w/w)) on ATPS binodal curves, effects of system pH, NaCl concentration, and tie-line length (TLL) on alkaline protease partition coefficient (K) and yield (Y%) at room temperature (30±2 ‡C). Casein hydrolysis was used for determination of alkaline protease activity. It was revealed that system pH had the slightest effect on locations of binodal curves (except at pH 10.5). In contrast, addition of NaCl appeared to have a significant effect on phase characteristics since binodal curves of systems with NaCl (4-10% (w/w)) shifted significantly towards the origin in comparison to the ones without NaCl. Increased NaCl concentration from 4 to 10% (w/w), however, showed trivial influence on locations of the binodal curves. Changes of system compositions due to variation in system pH, TLL, and NaCl concentrations obviously resulted in varied obtainable K and Y% of alkaline proteases. Longer TLL and higher pH generally resulted in higher K. In contrast, the lower NaCl concentration, the higher K. Since the same phase volume ration (1:1) was used throughout the experiments, Y% depended solely on K. The most suitable PEG1000/potassium phosphate ATPS was determined at pH 9.5, and comprised PEG1000, potassium phosphate, and NaCl 18.0,13.0, and 0% (w/w), respectively. This system resulted in considerably high K, and Y% of 20.0, and 95.1%, respectively. Information from this study will be important for further development of an ATPS extraction unit for alkaline protease recovery.     

Recovery and partial purification of thermophilic β-xylosidase derived from recombinant Bacillus megaterium MS941 by aqueous two-phase system

A polymer–salt-based aqueous two-phase system (ATPS) was developed for the effective extraction and purification of extracellular β-xylosidase from the fermentation broth of recombinant Bacillus megaterium MS941. The effect of molecular weight (MW) of polyethylene glycol (PEG), tie-line length (TLL), volume ratio (V_R), crude loading and pH on the recovery performance was evaluated. Under the optimal extraction conditions, β-xylosidase was successfully purified up to 23-fold with a recovery yield of 99% in the bottom salt-rich phase at PEG 4,000/potassium phosphate ATPS comprising TLL of 41.8, V_R of 2.3, crude loading (C_L) of 30% (w/w) at pH 6.     

Application of Response Surface Methodology for Optimization of Bromelain Extraction in Aqueous Two-Phase System

Extraction of bromelain from pineapple fruit in an aqueous two phase system (ATPS) composed of polyethylene glycol (PEG) 1500 and potassium phosphate has been studied using response surface methodology. The various process variables such as PEG, potassium phosphate and NaCl concentration, and pH were optimized using a central composite rotatable design (CCRD) of response surface methodology (RSM) based on the partition coefficient, % yield, and purification factor of an enzyme. An optimized ATPS composed of 14% (w/w) PEG 1500, 17.66% (w/w) potassium phosphate and 1 mM sodium chloride at pH 7.5 was used to purify bromelain from a pineapple fruit. With this system, a maximum enzyme partition coefficient of 12.62 and %yield of 90.33 in the top PEG-rich phase with a purification factor of 2.4 was predicted. The enzyme partition coefficient, % yield, and purification factor obtained from experimentation are 12.22, 89.65, and 2.8, respectively, in the top PEG phase. The response model is validated by the closeness between the predicted and experimental results.     

Optimization of Rhizopus niveus Lipase Partitioning by an Aqueous Biphasic System

An unconventional aqueous two‐phase system (ATPS) composed of polyethylene glycol (PEG) and sodium carbonate was developed and optimized by employing response surface methodology for separation of Rhizopus niveus lipase. A five‐level central composite design was applied to evaluate the optimal level of three process variables in order to obtain maximum lipase separation. Experimental data were analyzed by regression and a polynomial model was created which was found significant. The maximum partition coefficient was achieved with the system PEG 4000/sodium carbonate. Validation experiments confirmed the high accordance of predicted and experimental results. The optimized ATPS can be applied as a suitable cost‐effective system for lipase extraction.