共查询到20条相似文献,搜索用时 62 毫秒
1.
《现代制造技术与装备》2016,(12)
本文以某履带车辆多段式高功率密度液压机械综合传动系统为研究对象,基于虚拟样机技术,综合运用CAD/CAE等多种软件,建立整个传动系统的三维虚拟样机模型,并对其各种动态特性进行仿真研究。首先应用MSC.ADAMS软件建立系统机械传动部分的虚拟样机模型,然后应用AMESim软件建立液压传动部分的仿真模型,并将各子系统在AMESim中集成为整个系统的多领域仿真虚拟样机模型。并针对所建立的离合器、行星排、液压泵马达等仿真模型进行初步的运动学和动力学仿真,验证所建立虚拟样机模型的正确性。 相似文献
2.
借助虚拟样机软件ADAMS建立了某采煤机截割减速器的虚拟样机模型,并分别对正常工况和人为构造的断齿故障工况进行了动态特性仿真.通过分析比较不同工况下的仿真结果,找出了齿轮断齿故障的故障特征. 相似文献
3.
通过三维CAD软件Solid Works进行三维实体建模,并基于虚拟样机软件ADAMS中的Hydraulics模块,对井下巷道吊装转载装置进行了液压系统虚拟样机的建模与动态仿真,分析了该装置中提升液压缸进行提升与下降等动作时的动力学特性。 相似文献
4.
5.
6.
主要通过机械设计软件SolidWorks和虚拟样机技术软件ADAMS及分析软件Matlab对汽车常用零部件中的滚动轴承进行动力学特性的初步仿真研究,探讨一种更为快速的零件动力学性能模拟分析方法。进而通过利用动态虚拟仿真技术达到辅助目前常规汽车台架试验、道路试验等对零部件及总成的动力学性能验证的目的,并为日后搭建汽车领域自动化虚拟仿真试验平台设计进行尝试。 相似文献
7.
8.
9.
10.
基于虚拟样机技术的雷达天线车机—液耦合仿真及其优化分析 总被引:1,自引:0,他引:1
应用虚拟样机软件ADAMS对雷达天线车的机械系统和液压系统进行耦合仿真研究,并以液压系统的参数为优化目标对雷达天线车系统进行优化设计,仿真结果表明,运用虚拟样机技术进行机液耦合仿真为产品的系统动态性能分析提供了有效手段。 相似文献
11.
12.
In a recent paper, the Ritz method with simple algebraic polynomials as trial functions was used to obtain an eigenvalue equation for the free vibration of a class of homogeneous solids with cavities. The method presented is here extended to the study of a class of non-homogeneous solids, in which each solid is composed of a number of isotropic layers with different material properties. The Cartesian coordinate system is used to describe the geometry of the solid which is modelled by means of a segment bounded by the yz, zx and xy orthogonal coordinate planes and by two curved surfaces which are defined by fairly general polynomial expressions in the coordinates x, y and z. The surface representing the interface between two material layers in the solid is also described by a polynomial expression in the coordinates x, y and z. In order to demonstrate the accuracy of the approach, natural frequencies are given for both a two- and three-layered spherical shell and for a homogeneous hollow cylinder, as computed using the present approach, and are compared with those obtained using an exact solution. Results are then given for a number of two- and three-layered cylinders and, to demonstrate the versatility of the approach, natural frequencies are given for a five-layered cantilevered beam with a central circular hole as well as for a number of composite solids of more general shape. 相似文献
13.
根据广州市珠江新城旅客自动运输系统(APM)列车的运行特点,介绍APM列车制动系统的制动方式及其特点,分析APM列车动态制动和摩擦制动的工作机理及其区别和联系,阐明APM列车制动系统的电控制过程和气控制过程,从而为APM列车制动系统的维护和管理提供一定的依据. 相似文献
14.
我公司于80年代末引进Aspera公司年产80万台冰箱(冷柜)压缩机生产线及软件技术,在压缩机加工中,活塞销孔(如图1所示)的加工是难点之一。用镗床加工,质量一直难以达到要求,废品率很高。后来我们将Aspera公司的加工工艺即精镗后滚光改为精镗后用金刚石铰刀粗、精铰孔,由此解决了这个技术难题。(1)原意大利Aspera公司工艺简述其工艺流程为:钻6.5通孔→扩孔至7+0.1→粗镗7.473+0.036、圆柱度0.01→精镗至7.935+0.006、圆柱度0.002→滚光7.938+0.006、圆柱度0… 相似文献
15.
三爪自定心卡盘作为机床的主要附件,已有一百多年的发展历史,尽管目前随着数控技术的不断发展,越来越多地需求高速动力卡盘,但三爪自定心卡盘目前仍有一定的市场。 要保证卡盘可靠地夹紧工件,必须使其有可靠的夹持精度;要保持卡盘的精度,必须要严格控制各零部件公差及误差,如盘丝的极心偏。 极心偏是形成圆的渐开线的基圆圆心 (极心 )与盘丝内孔中心不同心所造成的偏差值。它对卡盘精度的影响分两种情况,一是卡爪夹持弧采用配磨,二是卡爪夹持弧采用单磨。本文主要探讨配磨时的影响。 卡爪夹持弧采用配磨,即每台卡盘整体… 相似文献
16.
17.
详细分析了圆柱面素线的直线度公差带在新旧标准中定义和解释的区别,并从对圆柱面素线实际要素检测的角度,提出了推行新标准的实际意义。 相似文献
18.
通过分析膨胀套在实际使用产生滑移受阻现象、卡死现象原因的实质,并在分析产生问题原因的基础上提出了改进措施即:增加导向机构。 相似文献
19.
设计了磨粉机快辊轴承座的加工工艺和具体的工装夹具.利用卧式加工中心加工磨粉机快辊轴承座,辅以能够高效快速夹紧的夹具,既可以保证加工精度,又能够提高加工效率. 相似文献
20.
The article presents a brief review of the wear models based on the kinetic thermofluctuation approach. The materials were developed using SamGTU sclerometric programming software and a set of instruments developed at Samara Engineering University for assessing the parameters of kinetic thermoactivation for surface fracture deformed by friction. The first obtained results of assessments and the estimated prediction of wear resistance exemplified by tribocouple of the aircraft chassis are presented. 相似文献