海洋防污涂料的研究进展

海洋生物粘附在海洋设备(如船舶)上所造成的生物污损危害极大。为减少这类危害而出现了众多的海洋防污技术。其中在海洋设备上涂刷海洋防污涂料具有应用广、效果好及操作简单等优点,因而受到学术界及工业界的广泛关注。本文就海洋防污涂料的研究状况作一简要的综述,同时简要介绍我国在海洋防污涂料方面的研究与应用状况。     

Polymer brush coatings for combating marine biofouling

A variety of functional polymer brushes and coatings have been developed for combating marine biofouling and biocorrosion with much less environmental impact than traditional biocides. This review summarizes recent developments in marine antifouling polymer brushes and coatings that are tethered to material surfaces and do not actively release biocides. Polymer brush coatings have been designed to inhibit molecular fouling, microfouling and macrofouling through incorporation or inclusion of multiple functionalities. Hydrophilic polymers, such as poly(ethylene glycol), hydrogels, zwitterionic polymers and polysaccharides, resist attachment of marine organisms effectively due to extensive hydration. Fouling release polymer coatings, based on fluoropolymers and poly(dimethylsiloxane) elastomers, minimize adhesion between marine organisms and material surfaces, leading to easy removal of biofoulants. Polycationic coatings are effective in reducing marine biofouling partly because of their good bactericidal properties. Recent advances in controlled radical polymerization and click chemistry have also allowed better molecular design and engineering of multifunctional brush coatings for improved antifouling efficacies.     

Enzymes for Antifouling Strategies

During the past decades, much effort has been made to find efficient alternative solutions to prevent and/or disrupt the adhesion of fouling organisms to surfaces. The use of enzymes emerges among the investigated approaches as one of the favorite candidate antifouling technologies due to enzymes' biodegradability and affordable prices. An overview of the different enzymatic antifouling strategies is presented, highlighting the most promising groups of enzymes, and their utilization upon surface-confinement to control biofouling. While the main strategies to control marine biofouling include the degradation of secreted adhesives and the production of antifouling compounds, the main concepts to control pathogenic biofilms are based on cell lysis and on the degradation of extracellular matrix polymers. Although immobilization can improve enzyme stability, activity and antifouling performance, up to date relatively few scientific articles concerning the use of immobilized enzymes to control biofouling have been published. The successful incorporation of enzymes into coatings yielding surfaces with broad antifouling spectrum and long-term efficacy remains a challenge.     

金融危机中的中国涂料工业及其技术发展趋势(三)

文章的第3部分综述了国内汽车涂料、塑料涂料、卷材涂料、航空涂料等工业涂料以及道路标线涂料、防火涂料、隔热保温涂料、防涂鸦涂料、海洋防污涂料等特种涂料的发展状况.     

国内外涂料工业现状及发展趋势(二)--中国涂料工业现状及发展思路

分析了中国涂料工业的发展现状以及面临的挑战。对我国各种功能型涂料———防火涂料、地坪涂料、氟碳涂料、纳米复合涂料、伪装涂料、船舶防污涂料、重防腐涂料、卷材涂料、水性聚氨酯涂料和隔热涂料等的研究现状进行了概述。提出了中国涂料工业的发展思路。     

Bioactive materials for antifouling coatings

Marine fouling is the result of the settling and subsequent growth of marine organisms on surfaces immersed in seawater. The most successful principle in use today for the protection of ship's hulls against this unwanted growth is the release of bioactive materials from antifouling coatings.

Antifouling coatings containing a mixture of cuprous oxide and triorganotin compounds in combination with sophisticated release mechanisms are considered to be today's most efficient systems. However, ever since the first biologically active materials were introduced into antifouling coatings, a search for alternatives has been continuing. Until the mid-1970s this research mainly involved the development of biocides which could simply prolong existing drydocking intervals, i.e. prolong the period in which the ship was fouling free. During the last decade, however, environmental aspects have become a top priority in the development of new biocides for antifouling coatings.     

环境友好型纳米银海洋防污损涂料研究

开发低毒、无毒的环境友好型抗海洋生物污损涂料的途径主要有两个方面：一是寻找防污高分子材料;二是寻找无毒的防污剂,在不破坏环境的前提下防止生物附着。综述了环境友好型抗海洋生物污损涂料的研究现状,结合纳米银在防污涂料中的应用,探讨了抗海洋生物污损涂料的发展趋势。     

Properties which influence marine fouling resistance in polymers containing silicon and fluorine

Our research strives to understand and construct polymer surfaces with no inherent power to interact with other materials, especially with the biological polymers used by marine organisms to bind themselves to objects in the sea. During the past 15 years we have synthesized polymers, formulated them into coatings, and measured their resistance to marine fouling in both static and dynamic testing. The polymer surface property which has been most frequently correlated with bioadhesion is critical surface tension (γ_c); in fact, a generalized relationship between γ_c and marine fouling has been known for more than twenty years. However, this behavior is also influenced by other bulk and surface properties of the polymer. This paper presents several alternative interpretations of the relationship between γ_c and bioadhesion, and uses these insights to develop requirements for polymers which refuse or resist strong bonds to other materials.     

无有机锡自抛光船舶防污涂料

本文说明研究开发船舶用无有机锡自抛光防污涂料的必要性及其进展情况。     

Environmentally Benign Fouling-Resistant Marine Coatings: A Review

The undesirable accumulation of marine organisms on any surfaces immersed in seawater is termed as marine fouling. This natural phenomenon contributes a major economic concern for marine industries, e.g. for ships, vessels, oil, wind-turbine sea-platforms, pipelines, water valves and filters by limiting the performances of the devices and materials. In the last decades, several efforts have been employed in the development of efficient antifouling (AF) coatings by following the recent trend in materials science. The current review presents the research and development made in AF strategies for coatings based on two main approaches, detachment of biofoulants or preventing biofoulants attachment.     

海洋船舶无毒、低毒防污涂料的研究进展

介绍了现代海洋船舶防污涂料的研究和应用情况,分别阐述了电化学防污涂料、化学活性物质释放型防污涂料和非化学活性物质释放型防污涂料的原理及其应用进展,并着重介绍了无毒低毒防污剂及防污涂料,指出长效、无毒的防污涂料将是未来涂料的发展方向。     

Assessing the Antimicrobial Activity of Polyisoprene Based Surfaces

There has been an intense research effort in the last decades in the field of biofouling prevention as it concerns many aspects of everyday life and causes problems to devices, the environment, and human health. Many different antifouling and antimicrobial materials have been developed to struggle against bacteria and other micro- and macro-organism attachment to different surfaces. However the “miracle solution” has still to be found. The research presented here concerns the synthesis of bio-based polymeric materials and the biological tests that showed their antifouling and, at the same time, antibacterial activity. The raw material used for the coating synthesis was natural rubber. The polyisoprene chains were fragmented to obtain oligomers, which had reactive chemical groups at their chain ends, therefore they could be modified to insert polymerizable and biocidal groups. Films were obtained by radical photopolymerization of the natural rubber derived oligomers and their structure was altered, in order to understand the mechanism of attachment inhibition and to increase the efficiency of the anti-biofouling action. The adhesion of three species of pathogenic bacteria and six strains of marine bacteria was studied. The coatings were able to inhibit bacterial attachment by contact, as it was verified that no detectable leaching of toxic molecules occurred.     

海洋船舶防污涂料的研究进展

归纳并总结了目前世界各国先进的防污涂料及其防污剂的类型及特性，系统地阐述了防污涂料的经济意义及军事意义，以及未来环保涂料的发展趋势。     

有机硅和氟树脂在海洋防污涂料中的应用研究进展

海洋生物污损是一个世界性难题,随着人们环境保护意识的增强,发展有效的环保型海洋防污体系成为该领域最重要的研究方向。有机硅/氟基海洋防污涂料具有环保无毒的特点,是目前的研究热点之一。文章概述了有机硅和氟低表面能防污涂料的研究进展,重点介绍了基于仿生原理的有机硅/氟污损释放型防污涂料,论述了材料表面特性包括物理特性、化学特性、结构特征等对生物附着的影响,介绍了两亲性添加剂改性的有机硅防污涂料的开发,展望了污损释放型防污涂料未来的发展方向。     

新型海洋防污涂料用防污剂及树脂的研究进展

防污剂和树脂是决定海洋防污涂料性能的关键成分。本文综述了近年来用于新型海洋防污涂料的天然产物防污剂和人工合成防污剂的研究进展;进一步从防污机理出发,总结了用于新型海洋防污涂料的基体树脂的种类,介绍了无锡自抛光树脂、生物可降解树脂、含杀菌官能团树脂、低表面能树脂和具有微相分离结构的树脂。此外,还展望了新型海洋防污涂料的未来发展方向,即环境友好的同时注重方式友好。     

Challenges for the Development of New Non-Toxic Antifouling Solutions

Marine biofouling is of major economic concern to all marine industries. The shipping trade is particularly alert to the development of new antifouling (AF) strategies, especially green AF paint as international regulations regarding the environmental impact of the compounds actually incorporated into the formulations are becoming more and more strict. It is also recognised that vessels play an extensive role in invasive species propagation as ballast waters transport potentially threatening larvae. It is then crucial to develop new AF solutions combining advances in marine chemistry and topography, in addition to a knowledge of marine biofoulers, with respect to the marine environment. This review presents the recent research progress made in the field of new non-toxic AF solutions (new microtexturing of surfaces, foul-release coatings, and with a special emphasis on marine natural antifoulants) as well as the perspectives for future research directions.     

A brief review of environmentally benign antifouling and foul-release coatings for marine applications

Antifouling coatings for ship hulls are a very important topic in coating research. They are essential with respect to fuel consumption of ships: without antifouling coating, biological species start to adhere to the ship’s exterior, leading to a gradual increase in fuel consumption. To date, the working principle of most of the paint systems applied is based on slow release of toxins in time (self-polishing coatings). In this article, we discuss the environmental impact of marine antifouling coatings based on quantitative data available from literature. In addition, we critically review hydrophilic antifouling and hydrophobic foul-release coatings as toxin-free alternatives and discuss their potential for replacing self-polishing coatings.     

Analytical method for the release of isothiazolones from microtubules in artificial seawater

With restrictions on the use of metallic biocides in aquatic antifouling coatings, it is important to develop new methods to both contain and deliver these alternative compounds from marine coatings systems. Utilization of microencapsulation is one approach to the delivery of biocides that has not been utilized in the mainstream of antifouling paint formulations. When formulating next generation paints that utilize hydrophobic nonmetallic biocides, it is necessary to develop an understanding of the release kinetics of the compounds from model polymeric coatings in order to better develop methods for providing long-term efficacy. The biocide 4,5-dichloro-2-n-octyl-4-isothiazolin-3-one is a nonmetallic and nonenvironmentally persistent biocide that has been registered in several countries for use as an antifouling agent and has gained approval by the U.S. Environmental Protection Agency. The release characteristics of this biocide from copper microtubules as well as polymeric films were determined by high performance liquid chromatography. Center for Biomolecular Science & Engineering, Code 6930, Washington, D.C. 20375-5348.     

有机硅低表面能防污涂料控制因素与研究进展

简述了海洋牛物的污损原理,介绍了有机硅低表面能防污涂料的主要特性,分析了影响其防污性能的主要因素,概述了该涂料的研究进展及试验研究方法,指出低表面能防污涂料是未来发展的重点,进一步改进和发展有机硅低表面能防污涂料具有很大的空间.     

海洋工程重防腐涂料的应用技术现状及发展分析

针对海洋腐蚀对海洋工程的影响及防腐蚀的意义,详细论述了海洋防腐涂料的种类、性能、要求,国际海工防腐标准对涂层配套的技术要求和试验指标,对当前长寿命、低表面处理、高固体分、无溶剂、水性化、环保低毒等海洋防腐涂料的研究重点及进展进行了介绍,分析了海洋防腐涂料应用现状及存在的问题,探讨了长寿命防腐涂料和高耐久复合涂层体系,提出了同寿命涂层设计理念。针对与国外的差距,提出了我国应加强基础性研究以及人才培养的建议。