基于小波包分解和PSO-BPNN的滚动轴承故障诊断

针对现有煤矿旋转机械滚动轴承故障诊断方法存在信号有效特征提取不完全、故障诊断精度不高及效率低等问题,提出了一种基于小波包分解和粒子群优化BP神经网络的滚动轴承故障诊断方法。该方法包括信号特征提取和故障类型识别两部分:在信号特征提取部分,对采集的滚动轴承振动信号进行小波包分解,得到各子频带能量及信号总能量,经归一化处理后获得表征滚动轴承状态的特征向量;在故障类型识别部分,通过粒子群优化算法优化BP神经网络的初始权值和阈值,以加速网络收敛速度,避免陷入局部极小值。实验结果表明,该方法提高了滚动轴承故障诊断效率和准确率。     

基于小波与小波包的变速器故障特征提取

本文结合自适应小波变换滤波去噪方法与小渡阈值去噪方法,提出了一种可用于变速器故障振动信号去噪的双层滤波去噪算法.该算法的滤波过程分为两层,第一层滤波采用自适应小波变换滤波算法;第二层滤波采用经典的小波阈值去噪算法对信号进行二次去噪.最后,将去噪后的故障信号采用小波包进行了分解,并提取了小波包频带能量作为故障特征向量.     

基于小波包分解和EMD-SVM的轴承故障诊断方法

针对轴承振动信号具有的非平稳和故障诊断样本数据难以按需获取的问题,设计了一种基于小波包分解和EMD SVM的故障诊断方法;首先,采用Mallat塔式算法对信号进行降噪,实现信号的小波分解,获得重构后的故障诊断子频带信号;然后,在经典的EMD算法的基础上定义了改进的EMD算法,采用改进的EMD算法对经过小波包降噪的故障诊断子频带信号进行特征提取,从而获得故障诊断特征向量;最后,采用适合小样本分类的SVM进行故障诊断,将经过小波包降噪和EMD特征提取的样本数据用于训练SVM,得到用于故障诊断的多个二分类SVM故障诊断模型,通过投票机制来确定样本数据最终对应的故障诊断类别:在Matlab环境下对轴承故障诊断进行实验,实验结果证明了文中基于小波包和EMD-SVM的方法一种适用于小样本的故障诊断方法,且与其它方法相比,具有诊断效率高和精度高的优点.     

基于粒子群优化支持向量机的电梯故障诊断

电梯故障时,具有故障特征提取困难和故障类型识别率低的问题。因此,拟提取其振动信号并进行分析,找到故障特征。然而,鉴于其振动信号为非平稳、非高斯且背景噪声较大的信号,给有效辨识造成很大困难,所以,提出应用最优小波包分解和最小二乘支持向量机相结合进行电梯智能故障诊断的方法。借助最优小波包理论,首先提取电梯故障振动信号的能量分布;然后将其能量分布与时域指标相结合,构造故障特征向量;最后,将故障特征向量作为粒子群算法优化最小二乘支持向量机的输入对电梯故障类型进行识别。仿真结果表明,最优小波包理论与最小二乘支持向量机相结合的故障诊断技术发挥了两者的优势,证明了该方法的有效性和实用性。     

基于小波包能量谱的往复式隔膜泵故障诊断研究

针对往复式隔膜泵故障的多元性、不确定性和并发性的特点,提出了基于小波包能量谱的往复式隔膜泵故障诊断方法。小波包能将振动信号分解到不同子频带,通过各子频带信号的能量变化反映设备运行状况。通过采集往复式隔膜泵振动信号,进行小波包分解为多个子频带,求出各频带的能量和能量比例,然后对比故障振动信号和正常振动信号的频带能量谱比例图,找出发生故障的频带,进而找出往复式隔膜泵的故障特征频率,诊断出故障。实验表明:通过小波包能量谱对往复式隔膜泵进行故障诊断是有效可行的。     

基于小波包分析及神经网络的汽轮机转子振动故障诊断

根据Bently实验台所采集的碰摩、松动、不对中、不平衡4种典型汽轮机转子振动故障信号,运用小波包分析方法对其进行能量分析并提取故障特征.分析结果表明:小波包分析与信号能量分解的故障特征提取方法,可以获得汽轮机转子振动的故障状态,有较好的故障区分度;另外由于经过小波包分解再重构后所提取的故障特征参数浓缩了汽轮机转子振动故障的全部信息,而BP神经网络具有优良的非线性映射能力,对提取的故障特征参数应用BP神经网络映射,可对汽轮机转子振动故障进行进一步的诊断.诊断结果表明:基于小波包分析及神经网络的故障诊断方法,具有较高的故障识别能力.     

三电平逆变器开路故障诊断研究

针对传统三电平逆变器开路故障诊断方法存在计算复杂、准确率低等问题,提出了一种基于小波分析与粒子群优化支持向量机的三电平逆变器开路故障诊断方法(WT-PSO-SVM).在分析三电平逆变器三相电流信号特征的基础上,利用三层小波对电流信号进行分解,提取各频带能量作为故障特征;小波变换提取到故障能量特征后,部分故障下所提取的能量十分接近,无法有效区分,进而引入正半周比例系数作为辅助特征;将归一化的能量和正半周比例系数作为特征向量输入支持向量机进行分类训练,同时利用粒子群算法优化支持向量机的参数以达到最好的分类效果,最终实现故障诊断.实验结果表明:WT-PSO-SVM方法可以有效识别三电平逆变器的开路故障,较其他故障诊断方法有更高的诊断精度和速度,在变负载和有噪声影响情况下仍有较高的故障识别准确率,准确率达到97.3%.     

一种有效的齿轮故障识别方法

针对齿轮故障特征信息往往被信号中的噪声淹没的问题,提出了一种基于谐波小波包、样本熵和灰色关联度的齿轮故障识别方法。首先,采用顺序形态滤波器,并结合实际选用最简单的直线结构元素,对实测齿轮振动信号进行顺序形态滤波降噪预处理。然后,采用谐波小波包将不同故障的齿轮振动信号分解到3层共8个频带上,并计算各频带的样本熵。最后,以样本熵为元素构造特征向量,通过计算标准故障模式特征向量与待识别样本的灰色关联度来判断齿轮的工作状态和故障类型。试验结果表明,该方法能够有效地应用于齿轮系统的故障诊断。     

一种有效的齿轮故障识别方法

针对齿轮故障特征信息往往被信号中的噪声淹没的问题,提出了一种基于谐波小波包、样本熵和灰色关联度的齿轮故障识别方法。首先,采用顺序形态滤波器,并结合实际选用最简单的直线结构元素,对实测齿轮振动信号进行顺序形态滤波降噪预处理。然后,采用谐波小波包将不同故障的齿轮振动信号分解到3层共8个频带上,并计算各频带的样本熵。最后,以样本熵为元素构造特征向量,通过计算标准故障模式特征向量与待识别样本的灰色关联度来判断齿轮的工作状态和故障类型。试验结果表明,该方法能够有效地应用于齿轮系统的故障诊断。     

7500吨浮吊齿轮箱故障诊断系统的研究

针对7500吨浮吊齿轮箱故障诊断问题,将离散小波变换和Tikhonov支持向量机结合建立了一个浮吊齿轮箱故障诊断系统。在输入层对振动信号进行离散小波变换,提取不同频带的能量参数作为故障特征向量,利用这些特征向量进行Tikhonov支持向量机的学习,训练后的Tikhonov支持向量机诊断浮吊齿轮箱故障。实验结果表明,离散小波Tikhonov支持向量机具有很强的故障识别性能和鲁棒性,诊断精度优于常规的BP网络方法。     

European Community policy and the market

Abstract This paper starts with some reflections on the policy considerations and priorities which are shaping European Commission (EC) research programmes. Then it attempts to position the current projects which seek to capitalise on information and communications technologies for learning in relation to these priorities and the apparent realities of the marketplace. It concludes that while there are grounds to be optimistic about the contribution EC programmes can make to the efficiency and standard of education and training, they are still too technology driven.     

一种自适应子融合集成多分类器方法

融合集成方法已经广泛应用在模式识别领域,然而一些基分类器实时性能稳定性较差,导致多分类器融合性能差,针对上述问题本文提出了一种新的基于多分类器的子融合集成分类器系统。该方法考虑在度量层融合层次之上通过对各类基多分类器进行动态选择,票数最多的类别作为融合系统中对特征向量识别的类别,构成一种新的自适应子融合集成分类器方法。实验表明,该方法比传统的分类器以及分类融合方法识别准确率明显更高,具有更好的鲁棒性。     

煤矿井下安全监控分站的设计及其仿真实现

为了设计一种具有低成本、低功耗、易操作、功能强且可靠性高的煤矿井下安全分站,针对煤矿安全生产实际,文章提出了采用MCS-51系列单片机为核心、具有CAN总线通信接口的煤矿井下安全监控分站的设计方案;首先给出煤矿井下安全监控分站的整体构架设计,然后着重阐述模拟量输入信号处理系统的设计过程,最后说明单片机最小系统及其键盘、显示、报警、通信等各个组成部分的设计;为验证设计方案的可行性与有效性,使用Proteus软件对设计内容进行仿真验证,设计的煤矿井下安全监控分站具有瓦斯、温度等模拟量参数超标报警功能和电机开停、风门开闭等开关量指示功能;仿真结果表明:设计的煤矿井下安全监控分站具有一定的实际应用价值.     

Explanation and prediction: an architecture for default and abductive reasoning

Although there are many arguments that logic is an appropriate tool for artificial intelligence, there has been a perceived problem with the monotonicity of classical logic. This paper elaborates on the idea that reasoning should be viewed as theory formation where logic tells us the consequences of our assumptions. The two activities of predicting what is expected to be true and explaining observations are considered in a simple theory formation framework. Properties of each activity are discussed, along with a number of proposals as to what should be predicted or accepted as reasonable explanations. An architecture is proposed to combine explanation and prediction into one coherent framework. Algorithms used to implement the system as well as examples from a running implementation are given.     

Three Process Perspectives: Organizations, Teams, and People

This paper provides the author's personal views and perspectives on software process improvement. Starting with his first work on technology assessment in IBM over 20 years ago, Watts Humphrey describes the process improvement work he has been directly involved in. This includes the development of the early process assessment methods, the original design of the CMM, and the introduction of the Personal Software Process (PSP)^SM and Team Software Process (TSP){^SM}. In addition to describing the original motivation for this work, the author also reviews many of the problems he and his associates encountered and why they solved them the way they did. He also comments on the outstanding issues and likely directions for future work. Finally, this work has built on the experiences and contributions of many people. Mr. Humphrey only describes work that he was personally involved in and he names many of the key contributors. However, so many people have been involved in this work that a full list of the important participants would be impractical.     

基于复小波噪声方差显著修正的SAR图像去噪

提出了一种基于复小波域统计建模与噪声方差估计显著性修正相结合的合成孔径雷达(Synthetic Aperture Radar,SAR)图像斑点噪声滤波方法。该方法首先通过对数变换将乘性噪声模型转化为加性噪声模型,然后对变换后的图像进行双树复小波变换(Dualtree Complex Wavelet Transform,DCWT),并对复数小波系数的统计分布进行建模。在此先验分布的基础上,通过运用贝叶斯估计方法从含噪系数中恢复原始系数,达到滤除噪声的目的。实验结果表明该方法在去除噪声的同时保留了图像的细节信息,取得了很好的降噪效果。     

How do children do mathematics with LOGO?

Abstract  This paper considers some results of a study designed to investigate the kinds of mathematical activity undertaken by children (aged between 8 and 11) as they learned to program in LOGO. A model of learning modes is proposed, which attempts to describe the ways in which children used and acquired understanding of the programming/mathematical concepts involved. The remainder of the paper is concerned with discussing the validity and limitations of the model, and its implications for further research and curriculum development.     

Editorial: Special issue on recent advances in hybrid control theory and applications

正The demands of a rapidly advancing technology for faster and more accurate controllers have always had a strong influence on the progress of automatic control theory.In recent years control problems have been arising with increasing frequency in widely different areas,which cannot be addressed using conventional control techniques.The principal reason for this is the fact that a highly competitive economy is forcing systems to operate in regimes where     

Information for Authors

正Aim The Journals of Zhejiang University-SCIENCE(A/B/C)areedited by the international board of distinguished Chinese andforeign scientists,and are aimed to present the latest devel-opments and achievements in scientific research in China andoverseas to the world’s scientific circles,especially to stimulateand promote academic exchange between Chinese and for-eign scientists everywhere.     

View-based model-driven architecture for enhancing maintainability of data access services

In modern service-oriented architectures, database access is done by a special type of services, the so-called data access services (DAS). Though, particularly in data-intensive applications, using and developing DAS are very common today, the link between the DAS and their implementation, e.g. a layer of data access objects (DAOs) encapsulating the database queries, still is not sufficiently elaborated, yet. As a result, as the number of DAS grows, finding the desired DAS for reuse and/or associated documentation can become an impossible task. In this paper we focus on bridging this gap between the DAS and their implementation by presenting a view-based, model-driven data access architecture (VMDA) managing models of the DAS, DAOs and database queries in a queryable manner. Our models support tailored views of different stakeholders and are scalable with all types of DAS implementations. In this paper we show that our view-based and model driven architecture approach can enhance software development productivity and maintainability by improving DAS documentation. Moreover, our VMDA opens a wide range of applications such as evaluating DAS usage for DAS performance optimization. Furthermore, we provide tool support and illustrate the applicability of our VMDA in a large-scale case study. Finally, we quantitatively prove that our approach performs with acceptable response times.