New Alkylation Route of Benzene with Ethylene Catalyzed by [bmim]Cl/FeCl_3 Ionic Liquid

Up to now the mechanism of Friedel-Crafts reactions catalyzed by ionic liquid have not been fully understood, while carbocation mechanism was assumed. It was found that the source of H and the route of reaction initiated the alkylation of benzene with ethylene catalyzed by [bmim]Cl/FeCl3 ionic liquid. The fact that dewatered ionic liquids have catalytic activity for the alkylation of benzene with ethylene suggests that there exists a new catalytic route. The distinctly Bronsted acid properties of 2-H in [bmim]Cl were found through FT-IR and HNMR     

[bmim]Cl／FeCl3离子液体催化苯与乙烯烷基化反应的新型机理

Up to now the mechanism of Friedel-Crafts reactions catalyzed by ionic liquid have not been fully understood, while carbocation mechanism was assumed. It was found that the source of H and the route of reaction initiated the alkylation of benzene with ethylene catalyzed by [bmim]Cl/FeCl3 ionic liquid. The fact that dewatered ionic liquids have catalytic activity for the alkylation of benzene with ethylene suggests that there exists a new catalytic route. The distinctly Bronsted acid properties of 2-H in [bmim]Cl were found through FT-IR and HNMR analysis of [bmim]Cl after titration with water free KOH in alcohol solution. In addition, the chemical shifts of proton on the [bmim]Cl ring, especially 2-H, are sensitive to the change of FeCl3 content and shifted downfield when FeCl3 was added into [bmim]Cl to form ionic liquid. Thus 2-H was easy to be disengaged from imidazolium ring with formation of H^ to initiate the reaction. The isotope-substituted method was employed to prove this mechanism, through the GC-MS analysis of alkylation products of deuterated benzene with ethylene. The route of alkylation catalyzed by FeC13 ionic liquid was found to follow the carbocation mechanism, the resource of H was presented and proved using HNMR analysis of ionic liquid to inspect the intensity change of 2-H. It was found that the intensity of 2-H reduced 23% after reaction showing that the H arising from alkylation reaction was supplied by 2-H on the imidazole ring.     

新型多磺酸基离子液体催化对甲酚与叔丁醇的烷基化反应

The alkylation of p-cresol with tert-butanol(TBA)to 2-tert-butyl-p-cresol(TBC)catalyzed by a novel multiple-SO3H functioned ionic liquid(IL1)was investigated.Meanwhile,the catalytic activity of this novel ionic liquid was compared with other four traditional ionic liquids.The results showed that IL1 has superior catalytic activity to other four traditional ionic liquids with the conversion of 85.3%and selectivity of 95.2%.Also,the reaction conditions were investigated to obtain the optimum conditions.Operational simplicity,small amount of usage,high activity,reusability and selectivity are the key features of this methodology.     

[bmin]Cl/[FeCl3]离子液体催化的苯与1-十八烯烷基化反应

Abstract The study on the catalysis of ionic liquids for alkylation of benzene with 1-octadecene to synthesize LAB （linear alkylbenzenes） was performed. The results showed that the most important factor that governed the conversion of olefin and selectivity of LAB was reaction temperature. Moreover, the effects of different ionic liquids and molar ratio of benzene to 1-octadecene on the conversion and selectivity were obviously in different degrees. The reaction temperature, molar ratio of benzene to 1-octadecene and the amount of catalyst were lower, compared with the traditional reaction technologies. The experimental results demonstrated that the ionic liquid had higher activity at 30℃, with over 98% selectivity of monoalkylbenzene and 100% conversion of the olefin at the molar ratio 0.08 of FeCl3 in ionic liquid to 1-octadecene and 10 for benzene to 1-octadecene.     

离子液体催化丁醇与盐酸反应制备丁基氯

The catalytic performance of some quaternary ammonium salts for the liquid phase reaction of butanol and hydrochloric acid at different conditions was studied experimentally and compared with the traditional catalyst （ZnCl2）. The organic ammonium catalysts investigated include ionic liquids N-butyl-N-methyl imidazolium fluoborate （[BMIM][BF4]） and N-butyl-N-methylimidazolium chloride （[BMIM]Cl） as well as hydrochloric salts of N-methylimidazol （[HMIM]Cl）, pyridine （[HPy]Cl） and triethylamine （[HEt3N]Cl）. It is shown that the intrinsic catalytic performance of all organic ammonium salts except [HEt3N]Cl is slightly superior to ZnCl2, while the selectivity of butyl chloride is nearly at the same level around 96%. The conversion of butanol increases slightly with temperature and the catalyst amount added while the variation of selectivity is not obvious. Based on the recycle experiments, the ionic liquids as catalyst for the reaction of butanol and hydrochloric acid can be used more than 5 times, which suggests great potential of using ionic liquids as novel catalyst for such reactions.     

离子液体捕集二氧化碳的研究进展(英文)

Due to their negligible volatility,reasonable thermal stability,strong dissolubility,wide liquid range and tunability of structure and property,ionic liquids have been regarded as emerging candidate reagents for CO2 cap-ture from industries gases.In this review,the research progresses in CO2 capture using conventional ionic liquids,functionalized ionic liquids,supported ionic-liquids membranes,polymerized ionic liquids and mixtures of ionic liquids with some molecular solvents were investigated and reviewed.Discussion of relevant research fields was presented and the future developments were suggested.     

Removal of mercaptans from light oils using ionic liquid–NaOH aqueous solution as extractants

The application of ionic liquids as alternatives to conventional organic solvents in the extraction process has been investigated. In the present study, fourteen species of imidazolium-based ionic liquids were added into the Na OH(aq) to remove the mercaptans. The influences of anion species and cation alkyl chain length of the imidazolium-based ionic liquids on the performance of mercaptan removal from light oils have been discussed.The efficiency of extraction for mercaptans exhibited the order of [Ac]~-N [OH]~-≈ [Br]~-N [BF4]~-. The longer alkyl chain imidazolium-based ionic liquids contributed to enhance desulfurization rate of 1-butyl mercaptan.100% desulfurization rate of 1-butyl mercaptan was achieved by the anion of Ac-ionic liquids and Na OH(aq)at a volume ratio of 40:1(V(oil):V(ionic liquid)) and a short equilibrium time within 10 min.     

Prediction and verification of heat capacities for pure ionic liquids

The heat capacity of ionic liquids is an important physical property,and experimental measuring is usually used as a common method to obtain them.Owing to the huge number of ionic liquids that can be potentially synthesized,it is desirable to acquire theoretical predictions.In this work,the Conductor-like Screening Model for Real Solvents(COSMO-RS) was used to predict the heat capacity of pure ionic liquids,and an intensive literature survey was conducted for providing a database to verify the prediction of COSMO-RS.The survey shows that the heat capacity is available for 117 ionic liquids at temperatures ranging 77.66-520 K since 2004,and the 4025 data points in total with the values from 76.37 to 1484 J·mol~(-1)·K~(-1) have been reported.The prediction of heat capacity with COSMO-RS can only be conducted at two temperatures(298 and 323 K).The comparison with the experimental data proves the prediction reliability of COSMO-RS,and the average relative deviation(ARD) is 8.54%.Based on the predictions at two temperatures,a linear equation was obtained for each ionic liquid,and the heat capacities at other temperatures were then estimated via interpolation and extrapolation.The acquired heat capacities at other temperatures were then compared with the experimental data,and the ARD is only 9.50%.This evidences that the heat capacity of a pure ionic liquid follows a linear equation within the temperature range of study,and COSMO-RS can be used to predict the heat capacity of ionic liquids reliably.     

离子液体介质中沥青砂内重组分降解过程

This paper illustrates the reaction pattern of catalytic degradation of macromolecules in asphaltic sands. Such parameters as ionic liquid catalyst system and H^ proton donor, that affect the change of the organic phase and the mass of organic matter in residual phase of asphaltic sands, were investigated. It was found that chloroaluminate (Ⅲ) ionic liquid/H3PO4 systems as reaction medium was an effective catalyst system for asphaltic sands degradation. The catalytic degradation of asphaltic sand swas related to the kinds of chloroaluminate (Ⅲ) ionic liquids and H^ proton donor. In [BMIM] [AlCl4]/H3PO4 reaction catalytic medium, the degradation of asphaltenes in the organic phase reached 16.44 %, the degradation of asphaltenes in the residual phase reached 30.74%. TLC-FID analysis of asphaltic sands showed that the main degradation products were saturates and aromatics, and resin fractions as well. At a temperature close to oil-bearing formation and with absense of oxygen, the yield of H2S reached 74%,which indicated that catalytic degradation of sulphur-containing compounds was easier.     

离子液介质中生物催化与生物转化的研究进展

Ionic liquids have negligibly low vapor pressure, high stability and polarity. They are regarded as green solvents. Enzymes, especially lipases, as well as whole-cell of microbe, are catalytically active in ionic liquids or aqueous-ionic liquid biphasic systems. Up to date, there have been many reports on enzyme-exhibited features and enzyme-mediated reactions in ionic liquids. In many cases, remarkable results with respect to yield, catalytic activity, stability and (enantio-, regio-) selectivity were obtained in ionic liquids in comparison with those observed in conventional media. Accordingly, ionic liquids provide new possibilities for the application of new type of solvent in biocatalytic reactions.     

己内酰胺苯磺酸类离子液体催化甲苯选择性硝化反应的研究

制备了己内酰胺对甲基苯磺酸和苯磺酸离子液体作为催化剂和溶剂,用于催化甲苯与等摩尔67%(m/m)硝酸的硝化反应,并用1H NMR进行了表征。研究了不同的反应温度、时间和离子液体用量及不同的离子液体等因素对甲苯硝化反应的影响。结果表明:该离子液体对甲苯的硝化有较好的对位选择性,产物中邻、对异构体质量比为1.2,较硝硫混酸硝化(邻、对异构体质量比约2.0)显著降低,收率可达37.1%,且可重复使用。     

离子液体在生物柴油合成中的应用研究进展

离子液体具有较强的催化能力、较强的溶解能力、较低的蒸气压等特性,其在生物柴油合成中的应用近年来受到人们的持续关注。本文介绍了离子液体不仅可作为酶催化合成生物柴油的绿色溶剂,作为酯交换反应合成生物柴油的催化剂,还可作为催化剂载体,并可以实现离子液体在生物合成应用中的循环利用。提出了今后应加强对离子液体中固定化脂肪酶催化合成生物柴油的传质过程和催化作用机制及离子液体的循环利用进行研究。     

芳烃与烯烃烷基化反应的催化机理进展

芳烃与烯烃的反应在有机合成中应用广泛。随着环保要求的提高，用于芳烃烷基化反应的传统催化剂逐渐被新型绿色催化剂所替代。近年来研究发现离子液体和分子筛对该反应具有高效催化作用且环境友好。本文探讨了离子液体和分子筛的酸性，总结了相应的的催化机理，对有关实验和理论研究工作进行了分析。同时揭示了离子液体和分子筛的结构对其催化性能的影响，为烷基化反应进一步研究奠定了基础。分析表明离子液体既能作为B酸，也能作为L酸起催化作用；分子筛主要作为B酸起催化作用，同时其催化性能与孔道结构、孔径大小及反应物尺寸密切相关。离子液体的稳定性较差、成本较高，而分子筛失活较快，未来需围绕提高离子液体稳定性、改进其制备方法以降低成本及改善分子筛结构以延长使用周期等方面展开研究。     

离子液体一步法催化合成4-乙酰胺基苯亚磺酸

离子液体作为一类同时具备优良溶剂性能与催化活性的新兴绿色催化剂，在各类反应当中有着广泛的应用。开发了以乙酰苯胺和SO₂为原料，采用离子液体一步法催化原料亚磺化反应合成4-乙酰胺基苯亚磺酸的新工艺，其中离子液体在反应过程中同时作为溶剂与催化剂。考察了多种离子液体一步法合成4-乙酰胺基苯亚磺酸，确定三乙胺盐酸盐/AlCl₃为最适宜离子液体，并进一步考察了三乙胺盐酸盐/AlCl₃自身物质的量配比、反应温度和反应时间等条件对其催化性能的影响；同时探讨了离子液体在反应中真正起催化作用的活性组分是[Al₂Cl₇]^-。离子液体一步法催化合成4-乙酰胺基苯亚磺酸最适宜反应条件为：反应温度为90℃、反应时间为4 h、n（三乙胺盐酸盐）：n（AlCl₃）=0.55：1.00（记为0.55Et₃NHCl/AlCl₃）。在最适宜反应条件下，液相收率达到89.55%。通过IR、LC-MS和¹H NMR等分析对产物结构进行了鉴定。     

氯铝酸离子液体催化苯与1-己烯的烷基化反应

研究了在具有 Lewis酸性的氯铝酸离子液体体系中进行的苯与 1 -己烯的烷基化反应。以溴化 1 -乙基 - 3 -甲基咪唑 (emim Br) ,溴化 1 -丁基 - 3 -甲基咪唑 (bmim Br) ,盐酸三乙胺 (Et3NHCl) ,溴化四丁基铵 (C4 H9NBr) ,十六烷基三甲基溴化铵 (C19H4 2 Br N)分别与 Al Cl3原位合成法制备离子液体催化体系。结果表明以上各种离子液体均有很高的催化活性 ,反应转化率在短时间内达到1 0 0 %。其中 Et3NHCl- Al Cl3离子液体单烷基选择性达到 98.1 %。而且催化剂易于分离并能重复使用 ,反应转化率没有明显降低     

Pechmann Reaction in Non-Chloroaluminate Acidic Ionic Liquids under Solvent-Free Conditions

Four non-chloroaluminate acidic ionic liquids have been used as catalysts for Pechmann condensations of phenols under solvent-free conditions. SO₃H-functionalized trifluoromethanesulfonate imidazolium ionic liquid has proved to be the most active catalyst. Ionic liquid loads as low as 5 mol % can be used leading to high yields with activated phenols at an oil bath temperature of 80 °C. The acidities of the four ionic liquids have also been tested using the Hammett method in dichloromethane. The results are consistent with their catalytic activities as observed in the Pechmann reaction of resorcinol. This methodology offers significant improvements for the synthesis of coumarins with regard to yield of products, simplicity in operation, and green aspects by avoiding toxic catalysts and solvents.     

液体酸耦合体系催化C4烷基化研究进展

综述了近十年来液体酸耦合体系催化C₄烃烷基化反应的最新进展,包括液体超强酸、有机酸-杂多酸、离子液体-酸耦合体系,对比了不同催化体系催化C₄烃烷基化反应过程中的烯烃转化率、三甲基戊烷的选择性和烷基化汽油的研究法辛烷值,总结了不同催化体系的优缺点。重点论述了离子液体-酸耦合体系催化剂中组成离子液体的阴阳离子以及耦合酸类型对C₄烃烷基化反应的影响：有机胺类离子液体较咪唑类有着更为优异的烷基化效果,阴离子和改性离子液体通过形成特定的结构来维持反应体系的酸强度、减少副反应,从而延长催化剂的使用寿命,耦合酸为反应提供酸性位点并与离子液体协同催化。离子液体-酸耦合催化体系具有酸耗低、稳定性好、不易失活且可循环使用等优点,是C₄烷基化催化剂未来的发展方向之一。     

磺酸功能化咪唑类离子液体催化丁二酸与丁二醇预聚酯化的过程研究

采用咪唑、1,3-丙磺酸内酯、1,2-二溴乙烷、1,4-二溴丁烷和聚乙二醇-200等为原材料合成了四种功能性磺酸类咪唑离子液体,考察了这四种离子液体催化剂酯化合成丁二酸丁二醇酯的性能,研究了催化剂用量、醇酸摩尔比、反应时间等因素对酯化反应的影响,并与钛酸正丁酯及钛酸异丙酯催化剂进行对比,得出其较佳工艺条件为:使用双-(3-丙烷磺酸-1-亚丁基咪唑)磺酸功能化离子液体为催化剂,用量为丁二酸摩尔质量的0.40%,醇酸比为1.3:1,反应温度160℃,反应时间为2 h,酯化率最高达到94.2%.     

离子液体催化甲苯羰基化合成对甲基苯甲醛的工艺探索

考察了7种不同离子液体对甲苯羰基化反应合成对甲基苯甲醛的催化性能,发现卤化1甲-基-3丁-基咪唑氯铝酸盐类离子液体的催化效果最好。考察了溴化1-甲基-3丁-基咪唑氯铝酸盐类离子液体中氯化铝的含量、反应温度、反应时间对甲苯羰基化反应合成对甲基苯甲醛的影响。结果发现,当反应温度为50℃,反应时间为6 h,离子液体中氯化铝的摩尔含量为0.67,催化剂与甲苯的质量比为2∶1时,目标产物对甲基苯甲醛的收率为26.8%,此离子液体重复利用3次后,仍具有较好的催化活性。     

功能化离子液体催化合成甘油单月桂酸酯

合成了由吡啶、N-甲基咪唑、N-甲基-2-吡咯烷酮提供有机阳离子, 磷钨酸、对甲苯磺酸提供阴离子的6种离子液体。使用NMR、FT-IR和TG对离子液体表征, 并考察它们催化甘油与月桂酸酯化的催化效果。结果表明, 这些离子液体都具有较好的热稳定性, 以1-(丁基-4-磺酸基)-3-甲基咪唑磷钨酸盐离子液体的热稳定性最好。在最佳条件使用离子液体催化甘油与月桂酸反应时, 阴离子的种类对月桂酸的转化率影响较大, 以对甲苯磺酸为阴离子的离子液体催化反应时, 月桂酸转化率较以磷钨酸为阴离子的离子液体的高;1-(丁基-4-磺酸基)-3-甲基咪唑对甲苯磺酸盐离子液体做催化剂时甘油单月桂酸酯的产率最高。催化剂重复使用性方面, 离子液体重复使用5次催化活性没有明显变化。