Synthesis and characterization of dextran hydrogels prepared with chlor‐ and nitrogen‐containing crosslinkers

In this study, we have synthesized dextran hydrogels by the crosslinking reactions of dextran with some selective Cl‐, and N‐containing functional monomers, such as epichlorohydrin (ECH), N,N′‐methylenebisacrylamide (MBAm), and glutaraldehyde (GA). Crosslinking reactions were carried out in the basic aqueous solutions (2.8NNaOH) at 25–50°C. The optimum conditions for effective crosslinking, i.e., temperature, crosslinking time, and amount of crosslinker, were determined for each system. The hydrogel discs of 3 mm diameter and 1.5 mm thickness were subjected to a number of Tris‐buffer solutions of desired pH (2.0–9.0) at 37°C. Swelling kinetics of the hydrogels were evaluated with second–order swelling model. The pH‐dependent swelling of hydrogels was strongly influenced by the functional group of crosslinker and crosslinker content. While the hydrogels prepared with ECH and MBAm shows higher swelling ability at basic medium than that of acidic medium, GA‐containing hydrogels exhibited just the opposite behavior. Mesh sizes (ξ) and average molecular weights between crosslinks (M_c) were estimated from swelling data using the Flory‐Rehner theory. Characterization studies were completed by Fourier transform infrared spectroscopy and thermal gravimetric analysis. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102:4213–4221, 2006     

Thermodynamic aspects of the bovine serum albumin adsorption onto N,N′‐ diethylaminoethyl dextran microbeads

Adsorption of proteins on solid surfaces is widely studied because of its importance in various biotechnological, medical, and technical applications, e.g., biosensor cardiovascular implants and chromatography. Adsorption thermodynamics has been studied on the microbeads of N,N′‐diethylaminoethyl (DEAE) dextran anion exchanger for bovine serum albumin at 25, 30, 35 40, and 45°C. As a result some thermodynamic parameters like Freundlich constants, thermodynamic equilibrium constant (K_D), standard free energy changes (ΔG_assoc), standard entropy changes (ΔS_assoc), and standard enthalpy change (ΔH_assoc) have been evaluated. Using the linear Van't Hoff plot, the ΔH_assoc value of the system for the interaction of BSA adsorbed crosslinked DEAE dextran microbeads was determined as 12.5 kJ/mol. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci, 2006     

A thermodynamic study of the binding of human serum albumin onto N,N′‐diethylaminoethyl dextran microbeads

Adsorption of proteins on solid surfaces is widely studied because of its importance in various biotechnological, medical, and technical applications, e.g., biosensors, cardiovascular implants, and chromatography. Adsorption thermodynamics has been studied on the microbeads of N,N′‐diethylaminoethyl (DEAE) Dextran anion exchanger for the human serum albumin (HSA) at 25, 30, 35, 40, and 45°C. As a result, some thermodynamic parameters like Freundlich constants, thermodynamic equilibrium constant (K_D), standard free energy changes (ΔG_assoc), standard entropy changes (ΔS_assoc), and standard enthalpy change (ΔH_assoc) have been evaluated. Using the linear Van't Hoff plot, ΔH_assoc value of the system for the interaction of bovine serum albumin (BSA)‐adsorbed crosslinked DEAE dextran microbeads was determined as 20.650 kJ/mol. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 3942–3947, 2006     

A comparative study of swelling properties of hydrogels based on poly(acrylamide‐co‐methyl methacrylate) containing physical and chemical crosslinks

Poly (acrylamide‐co‐methyl methacrylate) hydrogels of different ratios were prepared by using chemical and physical crosslinks to study the effect of nature of crosslinks on swelling behavior of hydrogels. The chemically crosslinked gels were prepared by using NN′‐methylene bis acrylamide, while physically crosslinked hydrogels were prepared by precipitation polymerization method, using dioxane as solvent. Detailed swelling kinetics such as swelling ratio, transport exponent n, diffusion coefficient D and the effect of pH on equilibrium swelling studies. The study revealed that the nature of crosslinks alter the swelling characteristics of the hydrogel. In chemically crosslinked hydrogels the water transport is Fickian in nature, while in the case of the physically crosslinked hydrogels the water transport mechanism is anomalous indicating major change in relaxation mechanism due to nature of crosslinks. The results also indicate that with increasing acrylamide content the swelling ratio of the hydrogels were also increased, but the transport exponent n remains nearly constant. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 779–786, 2003     

Surface DEAE groups facilitate protein transport on polymer chains in DEAE‐modified‐and‐DEAE‐dextran‐grafted resins

Sepharose FF was modified with diethylaminoethyl‐dextran (DEAE‐dextran, DexD) and/or DEAE (D) to fabricate three types of ion exchangers FF‐DexD (grafting‐ligand resin), FF‐D (surface‐ligand resin), and FF‐D‐DexD (mixed‐ligand resin), for protein adsorption equilibria and kinetics study. It was found that both adsorption capacity and uptake rate (effective diffusivity, D_e) were significantly enhanced by grafting DEAE‐dextran. Notably, the D_e values on FF‐DexD and FF‐D‐DexD (D_e/D₀ > 1.4) were six times greater than those on FF‐D (D_e/D₀ < 0.3). More importantly, the increase of surface‐ligand density greatly enhanced uptake kinetics on FF‐D‐DexD. The results indicate that the surface ligands assisted the transport of bound proteins on polymer chains in the mixed‐ligand resins. That is, surface ligands worked as “transfer stations” between two neighboring chains, resulting in enhanced transport of bound proteins on chains. The research thus disclosed the unique role of surface ligands in facilitating protein uptake kinetics onto polymer‐grafted ion‐exchangers. © 2016 American Institute of Chemical Engineers AIChE J, 62: 3812–3819, 2016     

Cu(II)‐incorporated,histidine‐containing,magnetic‐metal‐complexing beads as specific sorbents for the metal chelate affinity of albumin

N‐Methacryloyl‐(L )‐histidine methyl ester (MAH) was synthesized from metharyloyl chloride and histidine. Spherical beads with an average size of 150–250 μm were obtained by the suspension polymerization of ethylene glycol dimethacrylate and MAH in an aqueous dispersion medium. Magnetic poly(ethylene glycol dimethacrylate‐co‐N‐Methacryloyl‐(L )‐histidine methyl ester) [m‐p(EGDMA‐co‐MAH)] microbeads were characterized with swelling tests, electron spin resonance, elemental analysis, and scanning electron microscopy. The specific surface area of the beads was 80.1 m²/g. m‐p(EGDMA‐co‐MAH) microbeads with a swelling ratio of 40.2% and 43.9 μmol of MAH/g were used for the adsorption of bovine serum albumin (BSA) in a batch system. The Cu(II) concentration was 4.1 μmol/g. The adsorption capacity of BSA on the Cu(II)‐incorporated beads was 19.2 mg of BSA/g. The BSA adsorption first increased with the BSA concentration and then reached a plateau, which was about 19.2 mg of BSA/g. The maximum adsorption was observed at pH 5.0, which was the isoelectric point of BSA. The BSA adsorption increased with decreasing temperature, and the maximum adsorption was achieved at 4°C. High desorption ratios (>90% of the adsorbed BSA) were achieved with 1.0M NaSCN (pH 8.0) in 30 min. The nonspecific adsorption of BSA onto the m‐p(EGDMA‐co‐MAH) beads was negligible. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 93: 2669–2677, 2004     

Adsorption of certain amino acids onto crosslinked diethylaminoethyl dextran microbeads

The adsorption dynamism of certain amino acids [alanine (Ala), serine (Ser), lysine (Lys), proline (Pro), and aspartic acid (Asp)] on crosslinked diethylaminoethyl (DEAE) dextran microbeads was investigated with electronic spectroscopy in aqueous solutions. Among the selected amino acids, Ala‐Pro and Ser‐Lys showed similar adsorption dynamism, but Asp showed the strongest tendency for adsorption. The interaction dynamism of Asp with crosslinked DEAE dextran microbeads was studied to determine the mechanism of this adsorption. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 96: 1985–1991, 2005     

Removal of textile dyes from single and ternary solutions using poly(acrylamide‐co‐N‐methylacrylamide) grafted katira gum hydrogel

A novel hydrogel poly(acrylamide‐co‐poly‐N‐methylacrylamide) grafted katira gum (KG) was synthesized via free radical copolymerization using a mixture of acrylamide and N‐methylacrylamide in presence of N,N′‐methylene‐bis‐acrylamide as a crosslinking agent. A series of hydrogels (KG‐1 to KG‐6) were prepared by varying amount of acrylamide and N‐methylacryamide. Poly‐acrylamide‐g‐katira gum (PAM‐g‐KG) and poly‐N‐methylacrylamide‐g‐katira gum (PNMA‐g‐KG) hydrogels were also prepared using same crosslinking agent. Swelling characteristics of all the prepared hydrogels in water were evaluated and the hydrogel with best swelling property (KG‐6) was identified. The hydrogel KG‐6 was characterized by FTIR, X‐ray diffractometer, and scanning electron microscopy and was used for the adsorption of textile dyes namely methylene blue (MB), malachite green (MG), and congo red (CR) from single and ternary solutions. Adsorption dynamics, kinetics, isotherm, and thermodynamics of all the prepared hydrogels were studied in the ternary dye solutions. The sorption kinetics data were fitted well to pseudo‐second order and the equilibrium adsorption data were found to follow Freundlich isotherm model. The thermodynamics studies showed that the adsorption process was spontaneous and exothermic in nature. The preferential dye adsorption by the hydrogel was followed in the order MB > MG > CR. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 45958.     

pH‐sensitive acrylic‐based copolymeric hydrogels for the controlled release of a pesticide and a micronutrient

Acrylic‐based copolymers of methyl methacrylate (MMA) and methacrylic acid (MAA) have been prepared by solution and bulk polymerization techniques using benzoyl peroxide (BPO) as an initiator. Three polymers were prepared with a varying ratio of MMA/MAA. In an effort to increase the hydrophilicity of the matrix, one MMA/MAA polymer was prepared by adding an additional amount of 2‐hydroxy ethyl methacrylate (HEMA). All the polymers were crosslinked in situ by ethylene glycol dimethacrylate (EGDMA). These polymers were characterized by Fourier transform infrared spectroscopy and differential scanning calorimetry. Viscous flow characteristics were determined from solution viscosity and rheological measurements. Dynamic and equilibrium swelling experiments were carried out under varying pH conditions (i.e., 0.1N NaOH, 0.1N HCl, and double‐distilled water). Partially crosslinked hydrogels show varying hydrophilicity because of the presence of carboxylic acid groups making them pH‐responsive. Swelling increased with an increasing number of —COOH groups on the polymer backbone and the hydrophilicity varied with changing pH. Cypermethrin, a widely used pesticide, and cupric sulfate, a model micronutrient, were loaded into these pH‐sensitive hydrogels to investigate their controlled release characteristics. The in vitro release rates of both compounds have been carried out under static dissolution conditions at 30°C. Release data have been fitted to an empirical relation to estimate transport parameters. The release results have been discussed in terms of the varying hydrophilicity of the hydrogel network polymers. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 87: 394–403, 2003     

Hydrogel characteristics of a novel temperature‐sensitive polymer,poly(N‐2‐methoxyisopropylacrylamide)

In this study, a novel temperature‐sensitive polymer, poly(N‐2‐methoxyisopropylacrylamide), PNMIPA, in the crosslinked hydrogel form was obtained. The monomer, N‐2‐methoxyisopropylacrylamide (NMIPA) was synthesized by the nucleophilic substitution reactions of acryloyl chloride with 2‐methoxyisopropylamine. Hydrogel matrix of PNMIPA was obtained by the bulk polymerization method. The bulk polymerization experiments were performed at +4°C, by using N,N‐methylenebisacrylamide (MBA) as crosslinker, polyethyleneglycol (PEG) 4000 as diluent, and potassium persulfate (KPS) and tetramethylethylenediamine (TEMED) as the initiator and accelerator, respectively. The same polymerization procedures were applied by changing monomer, initiator, crosslinker and diluent concentrations in order to obtain crosslinked gel structures having different temperature–sensitivity properties. The equilibrium swelling ratio of PNIMPA gel matrices at constant temperature increased with increasing initiator concentration and decreasing monomer concentration. The use of PEG 4000 as diluent in the gel synthesis resulted in about two times increase in equilibrium swelling ratios in the low temperature region. A decrease in the equilibrium swelling ratios of gel matrices started at 30°C and the decrease became insignificant at 55°C. Temperature‐sensitivities were determined in two different media. Distilled water medium was used in order to observe the temperature‐sensitivity of the gel clearly and the phosphate buffer medium was used in order to represent the temperature‐sensitive swelling behavior of the gel when it is used in biological media. Step effect was applied on ambient temperature in two opposite directions in order to examine the dynamic swelling and shrinking behaviors of the gels. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Swelling behavior and cell viability of dehydrothermally crosslinked poly(vinyl alcohol) hydrogel grafted with N‐vinyl pyrrolidone or acrylic acid using γ‐radiation

To improve equilibrium water content, dehydrothermally crosslinked poly(vinyl alcohol) (PVA) hydrogel was grafted with N‐vinyl pyrrolidone (NVP) or acrylic acid (AA) monomer using γ‐radiation. Swelling behavior of the grafted hydrogels was studied in phosphate‐buffered saline, and cell viability was evaluated using fibroblast cells from mouse connective tissue. Equilibrium water content of AA‐ and NVP‐grafted PVA hydrogel ranged between 40–60% and 60–80%, respectively, depending on radiation dose and monomer concentration. For maximum degree of swelling, the optimum monomer concentration and radiation dose were 20% by weight and 20 kGy, respectively. Fibroblast cells seeded on NVP‐grafted hydrogel had an extended oval morphology while those seeded on AA‐grafted PVA had a rounded spherical morphology. These results support the use of NVP for grafting PVA to increase swelling and improve cell viability. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 91: 2862–2868, 2004     

pH‐sensitive uniform gel beads for DNA adsorption

Uniform gel beads 3 mm in diameter were obtained by the suspension polymerization of an amine functionalized monomer, N‐3‐(dimethyl amino)propylmethacrylamide (DMAPM). The polymerization of DMAPM in the form of uniform droplets could be achieved at room temperature in an aqueous dispersion medium by using Ca–alginate gel as the polymerization mold. In this preparation, potassium persulfate/tetramethyl ethylenediamine and sodium alginate/calcium chloride were used as the redox initiator and the stabilizer systems, respectively. The crosslinked DMAPM gel beads exhibited pH‐sensitive, reversible swelling–deswelling behavior. The uniform gel beads were also obtained by the copolymerization of DMAPM and acrylamide (AA) in the same polymerization system. Although copolymer gel beads with higher pH sensitivities were obtained with increasing feed concentration of DMAPM, the total monomer conversion decreased. Crosslinked DMAPM and DMAPM–AA copolymer gel beads were utilized as sorbents for DNA adsorption. The gel beads produced with higher DMAPM feed concentration exhibited higher equilibrium DNA adsorption capacity. The DNA equilibrium adsorption capacities up to 50 mg DNA/g dry gel could be achieved with the crosslinked DMAPM gel beads. This value was reasonably higher relative to the previously reported adsorption capacities of known sorbents. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 77: 3154–3161, 2000     

Preparation and characterization of pH‐ and temperature‐responsive semi–interpenetrating polymer network hydrogels based on linear sodium alginate and crosslinked poly(N‐isopropylacrylamide)

In this study, pH‐ and temperature‐responsive hydrogels based on linear sodium alginate (SA) and crosslinked poly(N‐isopropylacrylamide) (PNIPAAm) were prepared by semi‐interpenetrating network (semi‐IPN) technique. The dually responsive hydrogels were characterized by FTIR, DSC, and SEM, and their temperature‐ and pH‐responsive behaviors were investigated by measuring equilibrium swelling ratios and pulsatile swelling experiments. The results showed that these hydrogels underwent volume phase transition at around 33°C irrespective of the pH value of the medium, but their pH sensitivity was evident only below their volume phase transition temperature. Under basic conditions, the swelling ratios of SA/PNIPAAm semi‐IPN hydrogels were greater than that of pure PNIPAAm hydrogel and increased with increasing SA content incorporated into the hydrogels, but the case was inverse under acidic conditions. The pulsatile swelling experiments indicated that the higher the SA content in SA/PNIPAAm semi‐IPN hydrogels, the faster the response rate to both pH and temperature change. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 97: 1931–1940, 2005     

Metal ion binding properties of poly(N-vinylimidazole) hydrogels

The ability of poly(N-vinylimidazole) hydrogels to bind Cu(II), Co(II), Ni(II), Zn(II), Cd(II), Pb(II), Hg(II), Na(I) and Ca(II) cations, as well as uranyl, vanadium, rhenium, and molybdenum complexes, was studied by a batch equilibrium procedure using atomic absorption spectroscopy and UV-Vis spectrophotometry. The optimum pH for ion adsorption was determined in any case. The influence of the crosslinking degree of the hydrogel on the sorption kinetics and the sorption capacity at equilibrium were also studied. Sorption from the binary mixture Cu(II) + U(VI) was also analyzed at the optimum pH. Elution of the ions adsorbed from single and binary solutions was achieved in all cases. A selective desorption of loaded hydrogels with two types of ions was attained. The general conclusion is that poly(N-vinylimidazole) hydrogels are excellent materials for retention of all the ions studied here [except for Pb(II), Na(I), and Ca(II)]. The elution, which can be selective, allows regeneration of the hydrogel. © 1998 John Wiley & Sons, Inc. J Appl Polym Sci 67:1109–1118, 1998     

Prolonged zero‐order BSA release from pH‐sensitive hydrogels of poly(AAc‐co‐DMAPMA) having rich nano through micro scale morphology

New variety of pH‐sensitive hydrogels, having macroporous interior with honey‐comb type architecture and continuous skin at the surface, have been developed by single step aqueous copolymerization of acrylic acid (AAc) and N‐[3‐(dimethylamino)propyl]‐methacrylamide (DMAPMA) in different feed ratios at 41 ± 1°C. Interlocked nanogels of ～ 300 nm were identified as the building blocks in all of these cylindrical poly(AAc‐co‐DMAPMA) matrices (PDMAAc). The gels showed good compressive strength even at a swelling as high as 4330% (mass) at pH 7.0. Morphology of McCoy fibroblast cell line remained unchanged in direct contact with different PDMAAc gels, and cell viability (±SD) was recorded to be in the range of 105 (±3)% to 87 (±8)% after 72 h. Bovine serum albumin (BSA) loaded gels were prepared by means of equilibrium partitioning. Loading efficiency of PDMAAc gels has been found to be in the range of 210–277 mg/g dry gel. BSA release from PDMAAc gels at 37°C has been found to follow non‐Fickian diffusion mechanism in simulated gastric juice (pH 1.2), and Case II transport in simulated intestinal juice (pH 7.4). In vitro study showed that the gels are capable of retaining >95% of the loaded BSA in gastric medium through average gastric emptying period. Again, ～ 56% BSA release was recorded in 24 h at pH 7.4, indicating prolonged BSA diffusion in intestinal condition. Constant rate of BSA diffusion was reflected from the release profiles at both the pH. Diffusion exponents also supported the same and indicated for absolute zero‐order kinetics at pH 7.4. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Nickel and copper removal study from aqueous solution using new cationic poly[acrylamide/N,N‐DAMB/N,N‐DAPB] super absorbent hydrogel

A new cationic poly[acrylamide/N,N‐diallyl morpholinium bromide/N,N‐diallyl piperidinium bromide] super absorbent hydrogels (H1–H7) were prepared via microwave irradiated free radical cyclopolymerization using different composition. By the swelling study, hydrogel H1 is found to bear good swelling properties amongst all prepared hydrogels. The hydrogel H1 has been characterized by Fourier transform infrared (FTIR) spectroscopy, scanning electron microscope (SEM), and TGA analysis. A batch system was applied to study the adsorption of Ni(II) and Cu(II) from aqueous solutions by hydrogel H1. The effect of treatment time, pH of the medium, amount of adsorbent doses, and initial feed concentration of metal ion on adsorption of Ni(II) and Cu(II) from their solution were also investigated. Adsorption of Ni(II) and Cu(II) increases with the increase in treatment time, adsorbent doses, and initial feed concentration and decreases with the increase in pH of the medium. The desorption of metal ions were carried out using 1N HCl and 0.5N H₂SO_4. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Removal of phosphate by using copper‐loaded poly(N‐vinylimidazole) hydrogels as polymeric ligand exchanger

Polymeric ligand exchangers (PLE) are generally composed of a crosslinked hosting resin that can firmly hold a transition metal ion which can act as terminal functional groups. In this study, poly(N‐vinylimidazole) (PVIm) hydrogels were synthesized by free radical polymerization/crosslinking of N‐vinylimidazole in aqueous solution. Swelling behavior of PVIm hydrogels was investigated and the gel with minimum amount of crosslinking agent, hence showing maximum swelling was selected as the optimum gel system for further studies. To prepare the corresponding PLE for the removal of phosphate, PVIm hydrogels were loaded with Cu(II) ions. Copper loading capacity of PLE was determined to be 5 mmol of Cu(II)/g of dry gel. For removal of phosphate, adsorption experiments were performed in batch mode at different pH (3–9) and phosphate concentrations. It was found that phosphate adsorption capacity did not change significantly within this pH range. The effect of initial concentration of phosphate on the adsorption behavior of PLE was determined for 10 different phosphate concentrations (0.1–1000 mg/L) at pH 7. NaCl solution was used for regeneration of phosphate adsorbed Cu(II) loaded PVIm hydrogels with 100% regeneration efficiency. The new PLE showed high affinity for phosphate; the highest uptake was found to be 218 mg/g dry PLE from 1000 mg/L phosphate solution. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Synergistic removal of Cu(II) and nitrazine yellow dye using an eco‐friendly chitosan‐montmorillonite hydrogel: Optimization by response surface methodology

A comprehensive feasibility study on adsorption of Cu(II) and a water‐soluble nitrazine yellow (NY) dye by chitosan‐montmorillonite (CS‐MMT) hydrogel as the biosorbent was investigated as a function of biosorbent dosage, initial concentration, pH, temperature, and the presence of salts. Box–Behnken methodology was applied to optimize the adsorption experiments. Maximum adsorption values were determined as 132.74 mg/g and 144.41 mg/g at pH = 5.0, for Cu(II) and NY dye, respectively. Equilibrium isotherms of Langmuir and Freundlich were analyzed by the non‐linear regression model. The equilibrium data were well described by Freundlich model and the adsorption process well fitted pseudo‐second order kinetics. The enthalpy change of adsorption (ΔH°) were calculated as ?3.78 kJ/mol and ?5.75 kJ/mol for Cu(II) and NY dye, respectively, indicating that the adsorption processes were exothermic. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43664.     

Interaction of a new anesthetic drug richlocain with linear and weakly crosslinked poly‐N‐vinylpyrrolidone

The properties of complexes of richlocain, a new local anesthetic drug, with linear and weakly crosslinked poly‐N‐vinylpyrrolidone were investigated with changes in media properties of pH, temperature, and solvent thermodynamic quality. The kinetics and activation energy of drug release from the gel matrix were determined. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 2977–2981, 2003     

Correlation between interfacial free energy and albumin adsorption in poly(acrylonitrile–acrylamide–acrylic acid) hydrogels

An investigation on the influence of chemical compositions and surface properties (e.g., surface free energy in air and hydrogel–water interfacial energy) on the adsorption of bovine serum albumin (BSA) at pH 7.4 on to a series of poly(acrylonitrile–acrylamide–acrylic acid) hydrogels was carried out. The interfacial energetics were determined from the contact angle data for air–gel and octane–gel in the water environment and the specific adsorption of BSA was determined with UV–VIS spectroscopy. It is shown that the higher contents of amide and acid groups in hydrogel bulk lead to the greater polar component of surface energy in air and the greater BSA adsorption in aqueous solutions. The BSA adsorption decreases with water amount in gels at lower amide/acid contents and increases at higher contents. The results imply that the interfacial interactions between the protein and the reorganized hydrogel interface in exposure with water, as well as the penetration of protein into pores of swollen gels, influence the BSA adsorption. © 1996 John Wiley & Sons, Inc.