High‐Performance Ultrathin Flexible Solid‐State Supercapacitors Based on Solution Processable Mo1.33C MXene and PEDOT:PSS

MXenes, a young family of 2D transition metal carbides/nitrides, show great potential in electrochemical energy storage applications. Herein, a high performance ultrathin flexible solid‐state supercapacitor is demonstrated based on a Mo_1.33C MXene with vacancy ordering in an aligned layer structure MXene/poly(3,4‐ethylenedioxythiophene):poly(styrenesulfonic acid) (PEDOT:PSS) composite film posttreated with concentrated H₂SO₄. The flexible solid‐state supercapacitor delivers a maximum capacitance of 568 F cm^?3, an ultrahigh energy density of 33.2 mWh cm^?3 and a power density of 19 470 mW cm^?3. The Mo_1.33C MXene/PEDOT:PSS composite film shows a reduction in resistance upon H₂SO₄ treatment, a higher capacitance (1310 F cm^?3) and improved rate capabilities than both pristine Mo_1.33C MXene and the nontreated Mo_1.33C/PEDOT:PSS composite films. The enhanced capacitance and stability are attributed to the synergistic effect of increased interlayer spacing between Mo_1.33C MXene layers due to insertion of conductive PEDOT, and surface redox processes of the PEDOT and the MXene.     

Wood‐Inspired Morphologically Tunable Aligned Hydrogel for High‐Performance Flexible All‐Solid‐State Supercapacitors

Oriented microstructures are widely found in various biological systems for multiple functions. Such anisotropic structures provide low tortuosity and sufficient surface area, desirable for the design of high‐performance energy storage devices. Despite significant efforts to develop supercapacitors with aligned morphology, challenges remain due to the predefined pore sizes, limited mechanical flexibility, and low mass loading. Herein, a wood‐inspired flexible all‐solid‐state hydrogel supercapacitor is demonstrated by morphologically tuning the aligned hydrogel matrix toward high electrode‐materials loading and high areal capacitance. The highly aligned matrix exhibits broad morphological tunability (47–12 µm), mechanical flexibility (0°–180° bending), and uniform polypyrrole loading up to 7 mm thick matrix. After being assembled into a solid‐state supercapacitor, the areal capacitance reaches 831 mF cm^?2 for the 12 µm matrix, which is 259% times of the 47 µm matrix and 403% times of nonaligned matrix. The supercapacitor also exhibits a high energy density of 73.8 µWh cm^?2, power density of 4960 µW cm^?2, capacitance retention of 86.5% after 1000 cycles, and bending stability of 95% after 5000 cycles. The principle to structurally design the oriented matrices for high electrode material loading opens up the possibility for advanced energy storage applications.     

Flexible MXene/Graphene Films for Ultrafast Supercapacitors with Outstanding Volumetric Capacitance

A strategy to prepare flexible and conductive MXene/graphene (reduced graphene oxide, rGO) supercapacitor electrodes by using electrostatic self‐assembly between positively charged rGO modified with poly(diallyldimethylammonium chloride) and negatively charged titanium carbide MXene nanosheets is presented. After electrostatic assembly, rGO nanosheets are inserted in‐between MXene layers. As a result, the self‐restacking of MXene nanosheets is effectively prevented, leading to a considerably increased interlayer spacing. Accelerated diffusion of electrolyte ions enables more electroactive sites to become accessible. The freestanding MXene/rGO‐5 wt% electrode displays a volumetric capacitance of 1040 F cm^?3 at a scan rate of 2 mV s^?1 , an impressive rate capability with 61% capacitance retention at 1 V s^?1 and long cycle life. Moreover, the fabricated binder‐free symmetric supercapacitor shows an ultrahigh volumetric energy density of 32.6 Wh L^?1, which is among the highest values reported for carbon and MXene based materials in aqueous electrolytes. This work provides fundamental insight into the effect of interlayer spacing on the electrochemical performance of 2D hybrid materials and sheds light on the design of next‐generation flexible, portable and highly integrated supercapacitors with high volumetric and rate performances.     

3D Macroscopic Architectures from Self‐Assembled MXene Hydrogels

Assembly of 2D MXene sheets into a 3D macroscopic architecture is highly desirable to overcome the severe restacking problem of 2D MXene sheets and develop MXene‐based functional materials. However, unlike graphene, 3D MXene macroassembly directly from the individual 2D sheets is hard to achieve for the intrinsic property of MXene. Here a new gelation method is reported to prepare a 3D structured hydrogel from 2D MXene sheets that is assisted by graphene oxide and a suitable reductant. As a supercapacitor electrode, the hydrogel delivers a superb capacitance up to 370 F g^?1 at 5 A g^?1, and more promisingly, demonstrates an exceptionally high rate performance with the capacitance of 165 F g^?1 even at 1000 A g^?1. Moreover, using controllable drying processes, MXene hydrogels are transformed into different monoliths with structures ranging from a loosely organized porous aerogel to a dense solid. As a result, a 3D porous MXene aerogel shows excellent adsorption capacity to simultaneously remove various classes of organic liquids and heavy metal ions while the dense solid has excellent mechanical performance with a high Young's modulus and hardness.     

Flexible Solid‐State Supercapacitor Based on Graphene‐based Hybrid Films

A flexible solid‐state asymmetric supercapacitor based on bendable film electrodes with 3D expressway‐like architecture of graphenes and “hard nano‐spacer” is fabricated via an extended filtration assisted method. In the designed structure of the positive electrode, graphene sheets are densely packed, and Ni(OH)₂ nanoplates are intercalated in between the densely stacked graphenes. The 3D expressway‐like electrodes exhibit superior supercapacitive performance including high gravimetric capacitance (≈573 F g^‐1), high volumetric capacitance (≈655 F cm^‐3), excellent rate capability, and superior cycling stability. In addition, another hybrid film of graphene and carbon nanotubes (CNT) is fabricated as the negative electrodes for the designed asymmetric device. In the obtained graphene@CNT films, CNTs served as the hard spacer to prevent restacking of graphene sheets but also as a conductive and robust network to facilitate the electrons collection/transport in order to fulfill the demand of high‐rate performance of the asymmetric supercapacitor. Based on these two hybrid electrode films, a solid‐state flexible asymmetric supercapacitor device is assembled, which is able to deliver competitive volumetric capacitance of 58.5 F cm^‐3 and good rate capacity. There is no obvious degradation of the supercapacitor performance when the device is in bending configuration, suggesting the excellent flexibility of the device.     

Multilayer‐Folded Graphene Ribbon Film with Ultrahigh Areal Capacitance and High Rate Performance for Compressible Supercapacitors

Limited by 2D geometric morphology and low bulk packing density, developing graphene‐based flexible/compressible supercapacitors with high specific capacitances (gravimetric/volumetric/areal), especially at high rates, is an outstanding challenge. Here, a strategy for the synthesis of free‐standing graphene ribbon films (GRFs) for high‐performance flexible and compressible supercapacitors through blade‐coating of interconnected graphene oxide ribbons and a subsequent thermal treatment process is reported. With an ultrahigh mass loading of 21 mg cm^?2, large ion‐accessible surface area, efficient electron and ion transport pathways as well as high packing density, the compressed multilayer‐folded GRF films (F‐GRF) exhibit ultrahigh areal capacitance of 6.7 F cm^?2 at 5 mA cm^?2, high gravimetric/volumetric capacitances (318 F g^?1, 293 F cm^?3), and high rate performance (3.9 F cm^?2 at 105 mA cm^?2), as well as excellent cycling stability (109% of capacitance retention after 40 000 cycles). Furthermore, the assembled F‐GRF symmetric supercapacitor with compressible and flexible characteristics, can deliver an ultrahigh areal energy density of 0.52 mWh cm^?2 in aqueous electrolyte, almost two times higher than the values obtained from symmetric supercapacitors with comparable dimensions.     

Flexible Carbon Dots-Intercalated MXene Film Electrode with Outstanding Volumetric Performance for Supercapacitors

2D MXenes have emerged as promising supercapacitor electrode materials due to their metallic conductivity, pseudo-capacitive mechanism, and high density. However, layer-restacking is a bottleneck that restrains their ionic kinetics and active site exposure. Herein, a carbon dots-intercalated strategy is proposed to fabricate flexible MXene film electrodes with both large ion-accessible active surfaces and high density through gelation of calcium alginate (CA) within the MXene nanosheets followed by carbonization. The formation of CA hydrogel within the MXene nanosheets accompanied by evaporative drying endow the MXene/CA film with high density. In the carbonization process, the CA-derived carbon dots can intercalate into the MXene nanosheets, increasing the interlayer spacing and promoting the electrolytic diffusion inside the MXene film. Consequently, the carbon dots-intercalated MXene films exhibit high volumetric capacitance (1244.6 F cm⁻³ at 1 A g⁻¹), superior rate capability (662.5 F cm⁻³ at 1000 A g⁻¹), and excellent cycling stability (93.5% capacitance retention after 30 000 cycles) in 3 m H₂SO₄. Additionally, an all-solid-state symmetric supercapacitor based on the carbon dots-intercalated MXene film achieves a high volumetric energy density of 27.2 Wh L⁻¹. This study provides a simple yet efficient strategy to construct high-volumetric performance MXene film electrodes for advanced supercapacitors.     

Oxygen‐Deficient Bismuth Oxide/Graphene of Ultrahigh Capacitance as Advanced Flexible Anode for Asymmetric Supercapacitors

Oxygen‐deficient bismuth oxide (r‐Bi₂O₃)/graphene (GN) is designed, fabricated, and demonstrated via a facile solvothermal and subsequent solution reduction method. The ultrafine network bacterial cellulose (BC) as substrate for r‐Bi₂O₃/GN exhibits high flexibility, remarkable tensile strength (55.1 MPa), and large mass loading of 9.8 mg cm^?2. The flexible r‐Bi₂O₃/GN/BC anode delivers appreciable areal capacitance (6675 mF cm^?2 at 1 mA cm^?2) coupled with good rate capability (3750 mF cm^?2 at 50 mA cm^?2). In addition, oxygen vacancies have great influence on the capacitive performance of Bi₂O₃, delivering significantly improved capacitive values than the untreated Bi₂O₃ flexible electrode, and ultrahigh gravimetric capacitance of 1137 F g^?1 (based on the mass of r‐Bi₂O₃) can be obtained, achieving 83% of the theoretical value (1370 F g^?1). Flexible asymmetric supercapacitor is fabricated with r‐Bi₂O₃/GN/BC and Co₃O₄/GN/BC paper as the negative and positive electrodes, respectively. The operation voltage is expanded to 1.6 V, revealing a maximum areal energy density of 0.449 mWh cm^?2 (7.74 mWh cm^?3) and an areal power density of 40 mW cm^?2 (690 mW cm^?3). Therefore, this flexible anode with excellent electrochemical performance and high mechanical properties shows great potential in the field of flexible energy storage devices.     

A Facile,High‐Yield,and Freeze‐and‐Thaw‐Assisted Approach to Fabricate MXene with Plentiful Wrinkles and Its Application in On‐Chip Micro‐Supercapacitors

MXene, as a new member of the two‐dimensional (2D) material family, has been widely studied. However, people often pay close attention to the versatility of MXene while ignoring its low exfoliation yield. In this work, a simplified and effective strategy to exfoliate multilayer‐MXene via the gentle water freezing‐and‐thawing (FAT) approach is proposed. The volume expansion of intercalated water can promote the exfoliation of MXene nanosheets. The yield of large FAT‐MXene flakes with special wrinkles can reach 39% after four cycles of the FAT process. Moreover, combining with sonication treatment can boost the yield of small MXene to a record high value of 81.4%. With the help of a commercial interdigital mask, an on‐chip all‐MXene micro‐supercapacitor (MSC) assembled by large FAT‐MXene is fabricated, exhibiting high areal and volumetric capacitance of 23.6 mF cm^?2 and 591 F cm^?3, respectively. This remarkable electrochemical performance of MXene‐MSC also confirms the high quality of MXene through this FAT strategy. This study may open up a new method to simultaneously boost the yield of MXene with small or large flake sizes, facilitating large‐scale and size‐dependent research on MXene.     

Achieving of Flexible,Free‐Standing,Ultracompact Delaminated Titanium Carbide Films for High Volumetric Performance and Heat‐Resistant Symmetric Supercapacitors

The volumetric performance of supercapacitors (SCs), besides the gravimetric performance, is attracting an increasing attention due to the fast development of electric vehicles and smart devices. Here, a unique design of symmetric supercapacitor material is reported with a tight face‐to‐face architecture by applying a high pressure to the delaminated Ti₃C₂ (d‐Ti₃C₂) films. The high pressure makes the d‐Ti₃C₂ films achieve an increased density, high electron conductivity, good wettability, and abundant interconnected mesopore channels to promote ion transport efficiently, that is, more cations can intercalate/deintercalate in the charging–discharging process. As a result, with the increase of the applying pressure, the d‐Ti₃C₂ film pressured at 40 MPa in 1 m Li₂SO₄ exhibits an ultrahigh capacitance of over 633 F cm^?3, outstanding energy density, and cyclic stability. Especially, the corresponding SC in 1 m 1‐ethyl‐3‐methylimidazolium tetrafluoroborate/acetonitrile organic electrolyte shows a high volumetric energy density of 41 Wh L^?1, which is the highest value reported for the SCs based on MXene materials in organic electrolytes. The outstanding volumetric electrochemical performance and thermal stability of the SCs based on the ultracompact d‐Ti₃C₂ film demonstrate their promising potential as forceful power sources for small electronic devices.     

Reassembly of MXene Hydrogels into Flexible Films towards Compact and Ultrafast Supercapacitors

The freestanding MXene films are promising for compact energy storage ascribing to their high pseudocapacitance and density, yet the sluggish ion transport caused by the most densely packed structure severely hinders their rate capability. Here, a reassembly strategy for constructing freestanding and flexible MXene-based film electrodes with a tunable porous structure is proposed, where the Ti₃C₂T_x microgels disassembled from 3D structured hydrogel are reassembled together with individual Ti₃C₂T_x nanosheets in different mass ratios to form a densely packed 3D network in microscale and a film morphology in macroscale. The space utilization of produced film can be maximized by a good balance of the density and porosity, resulting in a high volumetric capacitance of 736 F cm⁻³ at an ultrahigh scan rate of 2000 mV s⁻¹. The fabricated supercapacitor yields a superior energy density of 40 Wh L⁻¹ at a power density of 0.83 kW L⁻¹, and an energy density of 21 Wh L⁻¹ can be still maintained even when the power density reaches 41.5 kW L⁻¹, which are the highest values reported to date for symmetric supercapacitors in aqueous electrolytes. More promisingly, the reassembled films can be used as electrodes of flexible supercapacitors, showing excellent flexibility and integrability.     

Large‐Area Flexible Core–Shell Graphene/Porous Carbon Woven Fabric Films for Fiber Supercapacitor Electrodes

New porous materials are of great importance in many technological applications. Here, the direct synthesis of multi‐layer graphene and porous carbon woven composite films by chemical vapor deposition on Ni gauze templates is reported. The composite films integrate the dual advantages of graphene and porous carbon, having not only the excellent electrical properties and flexibility of graphene but also the porous characteristics of amorphous carbon. The multi‐layer graphene/porous carbon woven fabric film creates a new platform for a variety of applications, such as fiber supercapacitors. The designed composite film has a capacitance of 20 μF/cm², which is close to the theoretical value and a device areal capacitance of 44 mF/cm².     

Cactus‐Like NiCoP/NiCo‐OH 3D Architecture with Tunable Composition for High‐Performance Electrochemical Capacitors

To effectively enhance the energy density and overall performance of electrochemical capacitors (ECs), a new strategy is demonstrated to increase both the intrinsic activity of the reaction sites and their density. Herein, nickel cobalt phosphides (NiCoP) with high activity and nickel cobalt hydroxides (NiCo‐OH) with good stability are purposely combined in a hierarchical cactus‐like structure. The hierarchical electrode integrates the advantages of 1D nanospines for effective charge transport, 2D nanoflakes for mechanical stability, and 3D carbon cloth substrate for flexibility. The NiCoP/NiCo‐OH 3D electrode delivers a high specific capacitance of ≈1100 F g^?1, which is around seven times higher than that of bare NiCo‐OH. It also possesses ≈90% capacitance retention after 1000 charge–discharge cycles. An asymmetric supercapacitor composed of NiCoP/NiCo‐OH cathode and metal–organic framework‐derived porous carbon anode achieves a specific capacitance of ≈100 F g^?1, high energy density of ≈34 Wh kg^?1, and excellent cycling stability. The cactus‐like NiCoP/NiCo‐OH 3D electrode presents a great potential for ECs and is promising for other functional applications such as catalysts and batteries.     

3D Porous Oxidation-Resistant MXene/Graphene Architectures Induced by In Situ Zinc Template toward High-Performance Supercapacitors

2D MXene materials have attracted intensive attention in energy storage application. However, MXene usually undergoes serious face-to-face restacking and inferior stability, significantly preventing its further commercial application. Herein, to suppress the oxidation and self-restacking of MXene, an efficient and fast self-assembly route to prepare a 3D porous oxidation-resistant MXene/graphene (PMG) composite with the assistance of an in situ sacrificial metallic zinc template is demonstrated. The self-assembled 3D porous architecture can effectively prevent the oxidation of MXene layers with no evident variation in electrical conductivity in air at room temperature after two months, guaranteeing outstanding electrical conductivity and abundant electrochemical active sites accessible to electrolyte ions. Consequently, the PMG-5 electrode possesses a striking specific capacitance of 393 F g⁻¹, superb rate performance (32.7% at 10 V s⁻¹), and outstanding cycling stability. Furthermore, the as-assembled asymmetric supercapacitor possesses a pronounced energy density of 50.8 Wh kg⁻¹ and remarkable cycling stability with a 4.3% deterioration of specific capacitance after 10 000 cycles. This work paves a new avenue to solve the two long-standing significant challenges of MXene in the future.     

Interfacial Approach toward Benzene‐Bridged Polypyrrole Film–Based Micro‐Supercapacitors with Ultrahigh Volumetric Power Density

2D soft nanomaterials are an emerging research field due to their versatile chemical structures, easily tunable properties, and broad application potential. In this study, a benzene‐bridged polypyrrole film with a large area, up to a few square centimeters, is synthesized through an interfacial polymerization approach. As‐prepared semiconductive films exhibit a bandgap of ≈2 eV and a carrier mobility of ≈1.5 cm² V^?1 s^?1, inferred from time‐resolved terahertz spectroscopy. The samples are employed to fabricate in‐plane micro‐supercapacitors (MSCs) by laser scribing and exhibit an ultrahigh areal capacitance of 0.95 mF cm^?2, using 1‐ethyl‐3‐methylimidazolium tetrafluoroborate ([EMIM][BF₄]) as an electrolyte. Importantly, the maximum energy and power densities of the developed MSCs reach values up to 50.7 mWh cm^?3 and 9.6 kW cm^?3, respectively; the performance surpassing most of the 2D material‐based MSCs is reported to date.     

Industry-Scale and Environmentally Stable Ti3C2Tx MXene Based Film for Flexible Energy Storage Devices

MXenes, 2D transition metal carbides, and nitrides have attracted tremendous interest because of their metallic conductivity, solution processability, and excellent merits in energy storage and other applications. However, the pristine MXene films often suffer from poor ambient stability and mechanical properties that stem from their polar terminal groups and weak interlayer interactions. Here, a heteroatom doping strategy is developed to tailor the surface functionalities of MXene, followed by the addition of large-sized reduced graphene oxide (rGO) as conductive additives to achieve a scalable production of S, N-MXene/rGO (SNMG-40) hybrid film with high mechanical strength ( ≈ 45 MPa) and energy storage properties (698.5 F cm⁻³). Notably, the SNMG-40 film also demonstrates long-term cycling stability ( ≈ 98% capacitance retention after 30 000 cycles), which can be maintained under ambient condition or immersed in H₂SO₄ electrolyte for more than 100 days. The asymmetric supercapacitor (aMGSC) based on SNMG-40 film shows an ultrahigh energy density of 22.3 Wh kg⁻¹, which is much higher than those previously reported MXene-based materials. Moreover, the aMGSC also provides excellent mechanical durability under different deformation conditions. Thus, this strategy makes MXene materials more competitive for real-world applications such as flexible electronics and electromagnetic interference shielding.     

Layered Silicon‐Based Nanosheets as Electrode for 4 V High‐Performance Supercapacitor

Silicon‐based materials have shown great potential and been widely studied in various fields. Unlike its unparalleled theoretical capacity as anodes for batteries, few investigations have been reported on silicon‐based materials for applications in supercapacitors. Here, an electrode composed of layered silicon‐based nanosheets, obtained through oxidation and exfoliation, for a supercapacitor operated up to 4 V is reported. These silicon‐based nanosheets show an areal specific capacitance of 4.43 mF cm^?2 at 10 mV s^?1 while still retaining a specific capacitance of 834 µF cm^?2 even at an ultrahigh scan rate of 50 000 mV s^?1. The volumetric energy and power density of the supercapacitor are 7.65 mWh cm^?3 and 9312 mW cm^?3, respectively, and the electrode can operate for 12000 cycles in a potential window of 4 V at 2 A g^?1, while retaining 90.6% capacitance. These results indicate that the silicon‐based nanosheets can be a competitive candidate as the supercapacitor electrode material.     

Knittable and Washable Multifunctional MXene‐Coated Cellulose Yarns

Textile‐based electronics enable the next generation of wearable devices, which have the potential to transform the architecture of consumer electronics. Highly conductive yarns that can be manufactured using industrial‐scale processing and be washed like everyday yarns are needed to fulfill the promise and rapid growth of the smart textile industry. By coating cellulose yarns with Ti₃C₂T_x MXene, highly conductive and electroactive yarns are produced, which can be knitted into textiles using an industrial knitting machine. It is shown that yarns with MXene loading of ≈77 wt% (≈2.2 mg cm^?1) have conductivity of up to 440 S cm^?1. After washing for 45 cycles at temperatures ranging from 30 to 80 °C, MXene‐coated cotton yarns exhibit a minimal increase in resistance while maintaining constant MXene loading. The MXene‐coated cotton yarn electrode offers a specific capacitance of 759.5 mF cm^?1 at 2 mV s^?1. A fully knitted textile‐based capacitive pressure sensor is also prepared, which offers high sensitivity (gauge factor of ≈6.02), wide sensing range of up to ≈20% compression, and excellent cycling stability (2000 cycles at ≈14% compression strain). This work provides new and practical insights toward the development of platform technology that can integrate MXene in cellulose‐based yarns for textile‐based devices.     

Flexible Ti3C2Tx@Al electrodes with Ultrahigh Areal Capacitance: In Situ Regulation of Interlayer Conductivity and Spacing

Although Ti₃C₂ MXene has shown great potential in energy storage field, poor conductivity and restacking between MXene flakes seriously hinders the maximization of its capacitance. Herein, a new strategy to solve the problems is developed. Gallery Al atoms in Ti₃AlC₂ are partially removed by simple hydrothermal etching to get Ti₃C₂T_x reserving appropriate Al interlayers (Ti₃C₂T_x@Al). Ti₃C₂T_x@Al keeps stable layered structure rather than isolated Ti₃C₂T_x flakes, which avoids flake restacking. The removal of partial Al frees up space for easy electrolyte infiltration while the reserved Al as “electron bridges” ensures high interlayer conductivity. As a result, the areal capacitance reaches up to 1087 mF cm^?2 at 1 mA cm^?2 and over 95% capacitance is maintained after 6000 cycles. The all‐solid‐state supercapacitor (ASSS) based on Ti₃C₂T_x@Al delivers a high capacitance of 242.3 mF cm^?2 at 1 mV s^?1 and exhibits stable performance at different bending states. Two ASSSs in tandem can light up a light‐emitting diode under the planar or wrapping around an arm. The established strategy provides a new avenue to improve capacitance performances of MXenes.     

Controllable Patterning of Porous MXene (Ti3C2) by Metal-Assisted Electro-Gelation Method

Since discovered in 2011, transition metal carbides or nitrides (MXenes) have attracted enormous attention due to their unique properties. Morphology regulation strategies assembling 2D MXene sheets into 3D architecture have endowed the as-formed porous MXene with a better performance in various fields. However, the direct patterning strategy for the porous MXene into integration with multifunctional and multichannel electronic devices still needs to be investigated. The metal-assisted electro-gelation method the authors propose can directly generate porous-structured MXene hydrogel with a tunable feature. By electrolyzing the sacrificial metal, the released metal cations initiate the electro-gelation process during which electrostatic interactions occur between cations and the MXene sheets. A high spatial resolution down to micro-meter level is achieved utilizing the method, enabling high-performance hydrogels with more complex architectures. Electronics prepared through this metal-assisted electro-gelation process have shown promising applications of the porous MXene in energy and biochemical sensing fields. Energy storage devices with a capacitance at 33.3 mF cm⁻² and biochemical sensors show prominent current responses towards metabolites (sensitivity of H₂O₂: 165.6  µ A mm ⁻¹ cm⁻²; sensitivity of DA: 212 nA  µ m ⁻¹ cm⁻²), suggesting that the metal-assisted electro-gelation method will become a prospective technique for advanced fabrication of MXene-based devices.