共查询到20条相似文献,搜索用时 156 毫秒
1.
锥束CT成像算法的正投影计算量大,消耗时间长.为此,本文提出了一种基于GPU实现的正投影加速算法.该算法在GPU的可编程管线中,通过纹理映射方法实现了圆轨迹锥束扫描模式下正投影计算.由于投影逐片并行计算,因此该算法具有较高的计算速率,且支持全浮点运算精度.在该正投影算法的基础上,本文还给出了三种算法优化方法.这些优化方法进一步提高了算法的执行效率.通过对Shepp-logan模型的正投影计算以及应用于迭代法进行三维图像重建等实验验证了本文算法的优点. 相似文献
2.
3.
提出了一种基于DSP的时间计权声级的计算模型,并对计权系数的修正方法进行了深入研究.给出了计算模型的一种基于DSP的算法,并对模型计算结果进行了误差分析.对应用该算法进行典型信号处理的过程进行了仿真研究,结果表明,此方法对于计算声音信号的时间计权声级有很高的精度,误差不超过0.001 dB,对声学及相关工程领域的时间计权量的实时计算有指导意义. 相似文献
4.
本文对应用于聚束SAR成像的卷积反投影(CBP)算法进行了详细研究,采用子孔径处理的方法,使得这种算法的计算量得到明显的降低.同时,对计算过程的分析表明CBP算法中所涉及的数量巨大的乘法运算可以用加法运算代替,加法操作又可以简单有效地利用可编程逻辑器件进行并行处理.通过上述改进,CBP算法成像处理在计算量降低的同时,硬件结构也得到了很大的简化.论文同时给出了大前斜视角情况下的处理方法、点目标仿真和利用快速CBP算法对E-SAR原始数据的成像结果. 相似文献
5.
6.
本文针对联合稀疏信号恢复问题,提出了一种贪婪增强贝叶斯算法.算法首先利用联合稀疏的特点对信号进行建模,然后在贝叶斯框架下,提出一种贪婪推理方式对信号恢复问题进行迭代求解.在迭代过程中,提出算法利用贝叶斯估计的方差信息来增强支撑恢复的结果,极大地提高了算法对信号恢复性能.理论分析表明:提出算法与同步正交匹配追踪算法具有相同的计算复杂度,远低于其他联合稀疏信号恢复算法.提出方法在具有高恢复精度和较低计算复杂度的同时,兼具贝叶斯方法和贪婪算法的优点.数值仿真验证了理论分析的有效性. 相似文献
7.
本文研究了DS-SS信号的扩频序列盲估计问题,针对现有特征值分解算法失步时间估计不准和计算量大等缺点,提出一种基于改进传播算子的扩频序列盲估计算法,该算法对传统传播算子估计信号子空间的方法进行了改进,使之能够估计扩频序列,并利用信号子空间估计信号失步时间.与基于特征值分解的方法相比,本文算法提高了失步时间的估计精度,并有效的降低了计算量.最后对算法计算量和性能进行了仿真分析和验证,结果表明本文算法有效,计算量远小于现有特征值分解算法,且估计性能在低信噪比条件下更优. 相似文献
8.
形态学算法在红外小目标检测上具有良好的性能,先对该算法的处理过程进行了分析,结合实际拍摄的红外小目标图像研究发现,算法在处理过程中存在很多不必要的计算,因此从提高算法的实时性出发,提出了一种基于方差标记的形态学方法.该方法首先计算图像每个像素的局部方差,然后由方差根据阈值判断条件对图像进行标记,标记完后再通过形态学算法对标记的部分进行Top-hat运算.理论分析和仿真实验表明,该方法能够极大的提高形态学的检测效率,而且对算法的检测性能有一定的提高. 相似文献
9.
10.
针对用于运动目标检测的光流算法存在处理复杂、计算量大等问题,提出一种帧间差分算法和金字塔LK光流法相结合的运动目标检测方案.该方法先对视频图像进行帧间差分处理,得到图像的运动区域,再对该运动区域进行金字塔LK光流计算,减少了计算区域,提高目标检测的速度.最后在搭建的视觉避障平台上使用LabVIEW语言进行算法程序验证,实验结果证明了算法的有效性. 相似文献
11.
论文主要提出一种将复杂的流密码算法或者流密码算法中的关键部分进行重新组合以得到一个Feistel结构的想法和实例。通过这样的方法,可以把欧洲流密码计划中的很多算法都转换成大家已经熟悉的Feistel结构,给密码分析和密码攻击带来了一定的启示和新的结构方法。 相似文献
12.
13.
Rasit Onur Topaloglu 《Circuits and Systems II: Express Briefs, IEEE Transactions on》2007,54(2):191-195
In this brief, we first introduce a process-variation-aware test-point generation method. With this method, faults are not obscured by process variations and we are able to generate new test points by measuring a very limited number of current values on-chip and estimating values of the remaining currents. We furthermore introduce a multiple-fault diagnosis procedure where we use the process-variation aware test-point generation method. The proposed methods can also be used for structural test. For the application, we have used a thermometer coded current steering digital to analog converter, as they are widely used due to their suitability for high speed applications and the symmetric design is suitable for the application of our method. We introduce a design-for-test hardware for the diagnosis cost reduction, while implementing our methods. Experimental results show that parametric errors as small as 20% can be diagnosed with up to 97.8% accuracy 相似文献
14.
一个新的差别矩阵及其求核方法 总被引:174,自引:1,他引:174
首先利用反例指出HU的利用差别距阵来求粗糙集中的核的方法是错误的,然后给出一个新的差别距阵的定义和求核方法,并证明了方法的正确性. 相似文献
15.
一种汉字楷书特征提取方法* 总被引:3,自引:0,他引:3
本文针对汉字楷体手书识别问题,从整体计算的角度,提出了一种汉字形体特征提取的解决方法并付诸于具体系统的实现。由于强调了汉字整体信息和相对关系的结构特征,比较成功地把握了区分手书汉字的关键因素,汉字识别率达80%以上,效果比较理想。 相似文献
16.
17.
组件温度筛选应力的确定方法 总被引:1,自引:1,他引:0
庄文青 《电子产品可靠性与环境试验》2003,(3):65-68
分析了目前国内在组件温度筛选方面的一般做法,吸收国外加速试验的经验,并借鉴定量筛选中根据成效率确定无故随检验时间的方法,提出了组件温度筛选中各参数(如温度范围、温度变化速率、高低温保持时间和循环数)的确定方法,并以一种税控加油机主板的温度筛选为例,介绍了组件温度筛选方法研究中所总结的一些经验。 相似文献
18.
We propose a new arbitration method for an input buffered switch with a buffered crossbar. In the proposed method, an exhaustive polling method is used to decrease the synchronization. Using an approximate analysis, we explain how the proposed method improves the switch performance. Also, using computer simulations, we show the proposed method outperforms the previous methods under burst traffic. 相似文献
19.
从大规模领域语料库中抽取领域概念,现有方法不能有效识别复合概念.本文提出一种基于混合判定模型的复合概念抽取方法,首先对文本进行分词处理,为每个词条添加词条标签,并对词条集进行噪音词消除和同义词合并处理,然后统计词条的加权词频,根据词条标签值计算位置亲和度和位置匹配度,判定和筛选可组合成复合概念的原子词条,最后通过设置不同复合深度值,实现多重复合概念抽取.采用不同规模语料库进行抽取实验,实验结果表明本文方法具有更高的召回率和准确率. 相似文献
20.
Marcelo Bertalmío Vicent Caselles Alvaro Pardo 《IEEE transactions on image processing》2007,16(9):2333-2347
Here, we present an efficient method for movie denoising that does not require any motion estimation. The method is based on the well-known fact that averaging several realizations of a random variable reduces the variance. For each pixel to be denoised, we look for close similar samples along the level surface passing through it. With these similar samples, we estimate the denoised pixel. The method to find close similar samples is done via warping lines in spatiotemporal neighborhoods. For that end, we present an algorithm based on a method for epipolar line matching in stereo pairs which has per-line complexity O (N), where N is the number of columns in the image. In this way, when applied to the image sequence, our algorithm is computationally efficient, having a complexity of the order of the total number of pixels. Furthermore, we show that the presented method is unsupervised and is adapted to denoise image sequences with an additive white noise while respecting the visual details on the movie frames. We have also experimented with other types of noise with satisfactory results. 相似文献